Film formation properties of asphalt emulsion under ambient temperature drying

References

• AASHTO PP 72, 2013. Standard practice for recovering residue from emulsified asphalt using low-temperature evaporative techniques. Washington, D.C: American Association of State Highway and Transportation Officials.
   Google Scholar
• Acevedo, S., Gutierrez, X., and Rivas, H., 2001. Bitumen-in-water emulsions stabilized with natural surfactants. Journal of Colloid and Interface Science, 242 (1), 230–238.
   Web of Science ®Google Scholar
• Adams, J., et al., 2018. Performance-graded specifications for asphalt emulsions used in chip seal preservation treatments. Transportation Research Record: Journal of the Transportation Research Board, 2672 (12), 20–31.
   Web of Science ®Google Scholar
• Airey, G.D., Rahimzadeh, B., and Collop, A.C., 2004. Linear rheological behavior of bituminous paving materials. Journal of Materials in Civil Engineering, 16 (3), 212–220.
   Web of Science ®Google Scholar
• ASTM D244-09, 2017. Standard test methods and practices for emulsified asphalts, American society for testing and materials. West Conshohocken, PA: ASTM International. www.astm.org.
   Google Scholar
• ASTM D4541, 2009. Standard test method for pull-off strength of coatings using portable adhesion testers, American society of testing and materials. West Conshohochen, PA: ASTM International. www.astm.org.
   Google Scholar
• ASTM D7497-09, 2016. Standard practice for recovering residue from emulsified asphalt using low temperature evaporative technique, American society for testing and materials. West Conshohocken, PA: ASTM International. www.astm.org.
   Google Scholar
• Cardone, F., Virgili, A., and Graziani, A., 2018. Evaluation of bonding between reclaimed asphalt aggregate and bitumen emulsion composites. Construction and Building Materials, 184, 565–574.
   Web of Science ®Google Scholar
• Du Chesne, A., et al., 2000. Film formation and redispersion of waterborne latex coatings. Journal of Colloid and Interface Science, 224 (1), 91–98.
   PubMed Web of Science ®Google Scholar
• Fang, X., Winnefeld, F., and Lura, P., 2016. Precipitation of anionic emulsifier with ordinary Portland cement. Journal of Colloid and Interface Science, 479, 98–105.
   PubMed Web of Science ®Google Scholar
• Graziani, A., et al., 2016. Effect of curing on the physical and mechanical properties of cold-recycled bituminous mixtures. Materials & Design, 95, 358–369.
   Web of Science ®Google Scholar
• Graziani, A., Virgili, A., and Cardone, F., 2018. Testing the bond strength between cold bitumen emulsion composites and aggregate substrate. Materials and Structures/Materiaux et Constructions, 51 (1), 1–11.
   Web of Science ®Google Scholar
• Grilli, A., et al., 2016. Volumetric properties and influence of water content on the compactability of cold recycled mixtures. Materials and Structures/Materiaux et Constructions, 49 (10), 4349–4362.
   Web of Science ®Google Scholar
• Keddie, J. L., and Routh, A. R., 2010. Fundamentals of latex film formation: processes and properties. Berlin.: Springer Science & Business Media.
   Google Scholar
• Kim, YR, Adams, J, Castorena, C, et al., 2017. Performance-related specifications for asphalt binders used in preservation surface treatments. Washington, DC: Transportation Research Board, National Research Council, NCHRP Report 837.
   Google Scholar
• Ministry of Transport of the People’s Republic of China, 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG E20. Beijing: China Communication Press. [In Chinese].
   Google Scholar
• Olard, C.L. Noan, E. Bedunean, A. Romier, 2008. Low energy asphalts for sustainable road construction. In: 4th Eurasphalt and Eurobitume congress. Copenhagen, Denmark, 21–34.
   Google Scholar
• Ouyang, J., et al., 2018. Effect of cement on the demulsifying behavior of over-stabilized asphalt emulsion during mixing. Construction and Building Materials, 177, 252–260.
   Web of Science ®Google Scholar
• Ouyang, J., et al., 2019. Effect of water content on volumetric and mechanical properties of cement bitumen emulsion mixture. Journal of Materials in Civil Engineering, 31, 04019085.
   Web of Science ®Google Scholar
• Ouyang, J., et al., 2021a. Investigation on the drying and demulsification process of filler–bitumen emulsion paste. Materials and Structures/Materiaux et Constructions, 54 (1), 1–12.
   Web of Science ®Google Scholar
• Ouyang, J., et al., 2021b. Investigation on maximum packing fraction of bitumen particles during emulsion drying. Materials and Structures/Materiaux et Constructions, 54 (5), 1–14.
   Web of Science ®Google Scholar
• Ouyang, J., et al., 2021c. Characterization of the drying behaviour of asphalt emulsion. Construction and Building Materials, 274, 122090.
   Web of Science ®Google Scholar
• Pan, C., Liang, D., Mo, L., Riara, M., and Lin, J., 2019. Influence of different modifiers on bonding strength and rheological performance of bitumen emulsion. Materials, 12 (15), 2414.
   PubMed Web of Science ®Google Scholar
• Robati, M., Carter, A., and Perraton, D., 2015. New conceptual model for filler stiffening effect on asphalt mastic of microsurfacing. Journal of Materials in Civil Engineering, 27 (11), 04015033.
   Web of Science ®Google Scholar
• Vanderhoff, J.W., Bradford, E.B., and Carrington, W.K., 1973. The transport of water through latex films. Journal of Polymer Science: Polymer Symposia, 41 (1), 155–174.
   Google Scholar
• Van Tent, A., and Te Nijenhuis, K., 2000. The film formation of polymer particles in drying thin films of aqueous acrylic latices: II. Coalescence, studied with transmission spectrophotometry. Journal of Colloid and Interface Science, 232 (2), 350–363.
   PubMed Web of Science ®Google Scholar
• Toussaint, A., and De Wilde, M., 1997. A comprehensive model of sintering and coalescence of unpigmented latexes. Progress in Organic Coatings, 30 (3), 113–126.
   Web of Science ®Google Scholar
• Walubita, L., Epps, A., and Glover, C.J., 2005. A surface performance graded specification for surface treatment of binders: development and initial validation, Texas Transportation Institute, FHWA Report No. FHWA/TX-05/0-1710-2.
   Google Scholar
• Wang, F., Liu, Y., and Hu, S., 2013. Effect of early cement hydration on the chemical stability of asphalt emulsion. Construction and Building Materials, 42, 146–151.
   Web of Science ®Google Scholar
• Ziyani, L., Gaudefroy, V., Ferber, V., Deneele, D., and Hammoum, F., 2014. Chemical reactivity of mineral aggregates in aqueous solution: relationship with bitumen emulsion breaking. Journal of Materials Science, 49 (6), 2465–2476.
   Web of Science ®Google Scholar