223
Views
0
CrossRef citations to date
0
Altmetric
Research Article

A simplified solving method for Fickian diffusion model and its application in simulating moisture distribution in asphalt concrete

, , &
Article: 2185240 | Received 30 Sep 2022, Accepted 22 Feb 2023, Published online: 10 May 2023

References

  • AASHTO, 2017. Effect of heat and air on a moving film of asphalt binder (rolling thin-film oven test). Washington, DC: American Association of State Highway and Transportation Officials.
  • Al-Omari, A., et al., 2002. Proposed methodology for predicting hma permeability (with discussion). Journal of the Association of Asphalt Paving Technologists, 71, 30–58.
  • Apeagyei, A.K., Grenfell, J.R., and Airey, G.D., 2014a. Evaluation of moisture sorption and diffusion characteristics of asphalt mastics using manual and automated gravimetric sorption techniques. Journal of Materials in Civil Engineering, 26 (8), 04014045.
  • Apeagyei, A.K., Grenfell, J.R.A., and Airey, G.D., 2014b. Evaluation of moisture sorption and diffusion characteristics of asphalt mastics using manual and automated gravimetric sorption techniques. Journal of Materials in Civil Engineering, 26 (8), 04014045.
  • Apeagyei, A.K., Grenfell, J.R., and Airey, G.D., 2015. Application of fickian and non-fickian diffusion models to study moisture diffusion in asphalt mastics. Materials and Structures, 48 (5), 1461–1474.
  • Arambula, E., et al., 2010b. Numerical analysis of moisture vapor diffusion in asphalt mixtures using digital images. Materials and Structures, 43 (7), 897–911.
  • Arambula, E., Caro, S., and Masad, E., 2010a. Experimental measurement and numerical simulation of water vapor diffusion through asphalt pavement materials. Journal of Materials in Civil Engineering, 22 (6), 588–598.
  • ASTM, 2013. Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (pav). Westen Conshohocken: Annual Book of ASTM Standards USA.
  • Caro, S., et al., 2008. Moisture susceptibility of asphalt mixtures, part 1: Mechanisms. International Journal of Pavement Engineering, 9 (2), 81–98.
  • Cheng, D., et al., 2003. Moisture damage evaluation of asphalt mixtures by considering both moisture diffusion and repeated-load conditions. Transportation Research Record: Journal of the Transportation Research Board, 1832 (1), 42–49.
  • Crank, J., 1979. The mathematics of diffusion. Oxford: Oxford university press.
  • Fernández-Gómez, W.D., Rondón Quintana, H., and Reyes Lizcano, F., 2013. A review of asphalt and asphalt mixture aging. Ingeniería e Investigación, 33 (1), 5–12.
  • Guide, A.A.U.S., 2014. Abaqus analysis user’s guide, abaqus 6.14; dassault systèmes simulia corp.
  • Hesp, S.A., Iliuta, S., and Shirokoff, J.W., 2007. Reversible aging in asphalt binders. Energy & Fuels, 21 (2), 1112–1121.
  • Huang, B., et al., 1999. Fundamentals of permeability in asphalt mixtures. Journal of the Association of Asphalt Paving Technologists, 68, 479–500.
  • Huang, T., and Luo, R., 2018. Investigation of effect of temperature on water vapor diffusing into asphalt mixtures. Construction and Building Materials, 187, 1204–1213.
  • Kassem, E., et al., 2006. Measurements of moisture suction and diffusion coefficient in hot-mix asphalt and their relationships to moisture damage. Transportation Research Record: Journal of the Transportation Research Board, 1970 (1), 45–54.
  • Kassem, E.A.-R., 2006. Measurements of moisture suction in hot mix asphalt mixes. College Station: Texas A&M University.
  • Kim, Y.R., 2008. Modeling of asphalt concrete.
  • Kringos, N., and Scarpas, A., 2005. Raveling of asphaltic mixes due to water damage. Transportation Research Record: Journal of the Transportation Research Board, 1929 (1), 79–87.
  • Kringos, N., and Scarpas, A., 2008. Physical and mechanical moisture susceptibility of asphaltic mixtures. International Journal of Solids and Structures, 45 (9), 2671–2685.
  • Kringos, N., Scarpas, A., and De Bondt, A., 2008. Determination of moisture susceptibility of mastic-stone bond strength and comparison to thermodynamical propertiesed. 2008 Annual meeting of the association of asphalt paving technologists, AAPT, Philadelphia, PA, 435-478.
  • Liu, P., et al., 2017. How stress treatments influence the performance of biodegradable poly(butylene succinate)-based copolymers with thioether linkages for food packaging applications. Materials, 10 (9), 1009–1010.
  • Liu, P., et al., 2018. Application of linear viscoelastic properties in semianalytical finite element method with recursive time integration to analyze asphalt pavement structure. Advances in Civil Engineering, 2018 (PT.1), 1–15.
  • Loizos, A., and Scarpas, A., 2005. Verification of falling weight deflectometer backanalysis using a dynamic finite elements simulation. International Journal of Pavement Engineering, 6 (2), 115–123.
  • Luo, R., and Huang, T., 2018. Development of a three-dimensional diffusion model for water vapor diffusing into asphalt mixtures. Construction and Building Materials, 179, 526–536.
  • Masad, E., et al., 2004. Analytical derivation of permeability and numerical simulation of fluid flow in hot-mix asphalt. Journal of Materials in Civil Engineering, 16 (5), 487–496.
  • Mohammad, L.N., Herath, A., and Huang, B., 2003. Evaluation of permeability of superpav® asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 1832 (1), 50–58.
  • Nguyen, T., et al., 1992. Development of a technique for in situ measurement of water at the asphalt/model siliceous aggregate interface.
  • Sasaki, I., Moriyoshi, A., and Hachiya, Y., 2006. Water/gas permeability of bituminous mixtures and involvement in blistering phenomenon. Journal of the Japan Petroleum Institute, 49 (2), 57–64.
  • Sirin, O., Paul, D.K., and Kassem, E., 2018. State of the art study on aging of asphalt mixtures and use of antioxidant additives. Advances in Civil Engineering, 2018, 3428961.
  • Skeel, R.D., and Berzins, M., 1990. A method for the spatial discretization of parabolic equations in one space variable. SIAM Journal on Scientific and Statistical Computing, 11 (1), 1–32.
  • Sun, W., and Wang, H., 2020. Molecular dynamics simulation of diffusion coefficients between different types of rejuvenator and aged asphalt binder. International Journal of Pavement Engineering, 21 (8), 966–976.
  • Tong, J., et al., 2022. A criterion of asphalt pavement rutting based on the thermal-visco-elastic-plastic model. International Journal of Pavement Engineering, 23 (4), 1134–1144.
  • Vasconcelos, K.L., et al., 2011. Experimental measurement of water diffusion through fine aggregate mixtures. Journal of Materials in Civil Engineering, 23 (4), 445–452.
  • Vasconcelos, K.L., Bhasin, A., and Little, D.N., 2010. Measurement of water diffusion in asphalt binders using Fourier transform infrared–attenuated total reflectance. Transportation Research Record: Journal of the Transportation Research Board, 2179 (1), 29–38.
  • Wang, F., et al., 2020. Correlation of asphalt performance indicators and aging degrees: a review. Construction and Building Materials, 250, 118824.
  • Xu, H., et al., 2017. Characterization of moisture vapor diffusion in fine aggregate mixtures using fickian and non-fickian models. Materials & Design, 124, 108–120.
  • Xu, O., et al., 2021. Migration characteristic and model of chloride ions for nacl-based salt storage asphalt mixtures. Construction and Building Materials, 280, 122482.
  • Yang, D., et al., 2021. Chloride threshold value and initial corrosion time of steel bars in concrete exposed to saline soil environments. Construction and Building Materials, 267, 120979.
  • Zhang, R., et al., 2019. The impact of bio-oil as rejuvenator for aged asphalt binder. Construction and Building Materials, 196, 134–143.
  • Zhou, X., et al., 2021. Nano-scale analysis of moisture diffusion in asphalt-aggregate interface using molecular simulations. Construction and Building Materials, 285, 122962.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.