References
- AASHTO, 2017. AASHTO M320. Standard Specification for Performance-Graded Asphalt Binder.
- AASHTO, 2015. AASHTO TP 91. Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test.
- AASHTO, 2013. Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR).
- Aspen Aerogels, 2022. Aerogel Insulation [Online]. Available from: https://www.aerogel.com/ [Accessed 20 Dec 2022].
- ASTM International, ASTM D36/D36M-14, 2020. Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus).
- ASTM International, ASTM D5-06, 2006. Standard Test Method for Penetration of Bituminous Materials.
- ASTM International, ASTM D7175-08, 2008. Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer.
- ASTM International, ASTM D8239-21a, 2021. Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test.
- ASTM International, 2002. Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscomete.
- Bruton, E., 2020. Rubberized asphalt benefits and history [Online]. Available from: https://asphaltplus.com/rubberized-asphalt-history/ [Accessed 20 June 2021].
- Cabot Corpotation, 2022. Aerogel Particles [Online]. Available from: https://www.cabotcorp.com/solutions/products-plus/aerogel/particles. [Accessed 21 Dec 2022].
- Clean Future, 2019. Black Gold: A New Material That Can Absorb Solar Light & Carbon Dioxide At Atmospheric Conditions, 13 July 2019 [Online]. Available from: https://www.cleanfuture.co.in/2019/07/13/black-gold-a-new-material-that-can-absorb-solar-light-carbon-dioxide-at-atmospheric-conditions/.[Accessed 10 Jan 2022].
- Collins, J., et al., 1991. Improved performance of paving bitumens by polymer modification. AAPT, 60, 43–79.
- Enersens, 2022. Silica aerogels [Online]. Available from: https://enersens.eu/product/ [Accessed 20 Dec 2022].
- FHWA, 2017. Superpave fundamentals reference manual. U.S. department of transportation, NHI Course #131053.
- Finnerty, C., et al., 2017. Synthetic graphene oxide leaf for solar desalination with zero liquid discharge. Environmental Science & Technology, 51 (20), 11701–11709.
- Gordon, D.A., 2002. Rheological evaluation of ethylene vinyl acetate polymer modified Bitumens. Construction and Building Materials, 16, 473–487.
- Hinislioglu, S., 2011. Optimization of the temperature susceptibility of bitumen modified with waste tire rubber by Taguchi method. Journal of Science and Technology, 4 (1), 99–110.
- Holly Frontier, 2021. Binder properties. Unaged, RTFO and PAV - PG58-28, PG64-16, PG76-22, Glendale, AZ.
- Kuennen, T., 2004. Asphalt rubber makes a quiet comeback. Better Roads Magazine.
- Maleki, H., et al., 2018. Compressible, thermally insulating, and fire retardant aerogels through self-assembling silk fibroin biopolymers inside a silica structure—an approach towards 3D printing of aerogels. ACS Applied Materials & Interfaces, 10 (26), 22718–22730.
- Mashaan, N.S. and MKarim, M.R., 2013. Investigating the rheological properties of crumb rubber modified bitumen and its correlation with temperature susceptibility. Materials Research, 16 (1), 116–127.
- Minnesota Asphalt Pavement Association, 2008. Comprehensive guide to PG asphalt binder selection in Minnesota. 30 12 2008. [Online]. Available from: https://cdn.ymaws.com/www.asphaltisbest.com/resource/resmgr/resources-economics/articles_and_flyers/guide_pg_binder_selection_mn.pdf [Accessed Jan 2022].
- Munera, J. and Ossa, E., 2014. Polymer modified bitumen: optimization and selection. Materials & Design (1980-2015), 62, 91–97.
- Obando, C.J., 2022. Development of a novel aerogel-based modified bituminous materials. Tempe: Arizona State University.
- Obando, C.J. and Kaloush, K.E., 2021. Estimating the thermal conductivity of asphalt binders. Journal of Testing and Evaluation (ASTM), 50 (2), 1–13.
- Obando, C.J. and Kaloush, K.E., 2022. Thermal conductivity of viscoelastic materials. United States Patent US20220252532A1, 8 November 2022.
- Palit, S.K., Reddy, K.S., and Pandey, B.B., 2004. Laboratory evaluation of crumb rubber modified asphalt mixes. Journal of Materials in Civil Engineering, 16 (1), 45–53.
- REM-Tech, 2022. Silica aerogel for thermal insulation [Online]. Available from: https://remtech.en.ec21.com/ [Accessed 21 Dec 2022].
- Sengoz, B. and Isikyakar, G., 2008. Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen. Construction and Building Materials, 22 (9), 1897–1905.
- Surnano Tech, 2020. Aerogels powder [Online]. Available from: http://www.china-aerogel.com/a/products/Powder/ [Accessed 19 Dec 2022].
- Tomas, G., 2012. What is aerogel? Theory, properties and applications, 22 August 2012 [Online]. Available from: https://www.azom.com/article.aspx?ArticleID=6499 [Accessed 2019].
- Zhang, J., et al., 2014. Phosphorene nanoribbon as a promising candidate for thermoelectric applications. Scientific Reports, 4, 1–8.
- Zhu, J., Birgisson, B., and Kringos, N., 2014. Polymer modification of bitumen: advances and challenges. European Polymer Journal, 54, 18–38.
- Ziegler, C., et al., 2017. Modern inorganic aerogels. Angewandte Chemie International Edition, 56, 13200–13221.