The fracture behaviour of cement bitumen emulsion mixture through the digital image correlation (DIC) method

References

• AASHTO TP105, 2015. Standard test method for determining the fracture energy of asphalt mixtures using the semi circular bend geometry (SCB). Washington, DC: American Association of State and Highway Transportation Officials.
   Google Scholar
• AASHTO TP124, 2016. Determining the fracture potential of asphalt mixtures using semicircular bend geometry (SCB) at intermediate temperature. Washington, DC: American Association of State and Highway Transportation Officials.
   Google Scholar
• Aliha, M.R.M., et al., 2014. Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures. Construction and Building Materials, 54, 623–635.
   Web of Science ®Google Scholar
• Aliha, M.R.M., et al., 2015. Evaluation of pure and mixed modes (I/III) fracture toughness of Portland cement concrete mixtures containing reclaimed asphalt pavement of modified asphalt mixtures. Construction and Building Materials, 95, 545–555.
   Web of Science ®Google Scholar
• Aliha, M.R.M, 2019. On predicting mode II fracture toughness (KIIc) of hot mix asphalt mixtures using the strain energy density criterion. Theoretical and Applied Fracture Mechanics, 99 (10), 36–43.
   Google Scholar
• Aliha, M.R.M., and Fattahi Amirdehi, H.R, 2017. Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents. Fatigue and Fracture of Engineering Materials and Structures, 40 (1), 55–68.
   Web of Science ®Google Scholar
• Aliha, M.R.M., Razmi, A., and Mansourian, A, 2017. The influence of natural and synthetic fibers on low temperature mixed mode I + II fracture behavior of warm mix asphalt (WMA) materials. Engineering Fracture Mechanics, 182, 322–336.
   Web of Science ®Google Scholar
• Ameri, M., et al., 2012. Mixed mode fracture resistance of asphalt concrete mixtures. Engineering Fracture Mechanics, 93, 153–167.
   Web of Science ®Google Scholar
• Ameri, M., et al., 2016. Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes. Fatigue and Fracture of Engineering Materials and Structures, 39 (7), 896–906.
   Web of Science ®Google Scholar
• ASTM D8044-16, 2017. Standard test method for evaluation of asphalt mixture cracking resistance using the semi-circular bend test (SCB) at intermediate temperatures. West Conshohocken, PA: American Society for Testing Materials.
   Google Scholar
• Banyhussan, Q.S., et al., 2020. Prediction of fracture parameters for asphalt mixtures using semi-circular bending test. IOP Conference Series: Materials Science and Engineering, 745 (1), 12131.
   Google Scholar
• Birgisson, B., et al., 2011. Characterisation of asphalt mixture cracking behaviour using the three-point bending beam test. International Journal of Pavement Engineering, 12 (6), 569–578.
   Web of Science ®Google Scholar
• Bocci, M., et al., 2011. A study on the mechanical behaviour of cement-bitumen treated materials. Construction and Building Materials, 25 (2), 773–778.
   Web of Science ®Google Scholar
• Bowen, C., and Koenders, B., 2000. Innovative process in asphalt production and application to obtain lower operating temperatures. 2nd Eurasphalt & Eurobitume Congress Barcelona, 830.
   Google Scholar
• Chehovits, J., and Galehouse, L, 2010. Energy usage and greenhouse gas emissions of pavement preservation processes for asphalt concrete pavements. Compendium of Papers from the First International Conference on Pavement Preservation, 27–42.
   Google Scholar
• Du, S, 2018. Effect of curing conditions on properties of cement asphalt emulsion mixture. Construction and Building Materials, 164, 84–93.
   Web of Science ®Google Scholar
• Eghbali, M.R., et al., 2019. The effect of ENDB specimen geometry on mode I fracture toughness and fracture energy of HMA and SMA mixtures at low temperatures. Engineering Fracture Mechanics, 216 (5), 106496.
   Google Scholar
• Elseifi, M.A., et al., 2012. Modeling and evaluation of the cracking resistance of asphalt mixtures using the semi-circular bending test at intermediate temperatures. Road Materials and Pavement Design, 13(Sup1), 124–139.
   Google Scholar
• Fakhri, M., Amoosoltani, E., and Aliha, M.R.M, 2017. Crack behavior analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and crumb rubber. Engineering Fracture Mechanics, 180, 43–59.
   Web of Science ®Google Scholar
• Fang, X., Garcia-Hernandez, A., and Lura, P, 2016. Overview on cold cement bitumen emulsion asphalt. RILEM Technical Letters, 1, 116.
   Google Scholar
• Freire, R.A., et al., 2021. Crack propagation analysis in bituminous mixtures reinforced by different types of geogrids using digital image correlation. Construction and Building Materials, 303 (7).
   Google Scholar
• Fuan, S., et al., 2021. Influence of specimen geometry on mode I fracture toughness of asphalt concrete. Construction and Building Materials, 276, 124522.
   Web of Science ®Google Scholar
• Gao, L., et al., 2014. Mixed-Mode cracking behavior of cold recycled mixes with emulsion using Arcan configuration. Construction and Building Materials, 55, 415–422.
   Web of Science ®Google Scholar
• Garilli, E., Autelitano, F., and Giuliani, F., 2019. Use of bending beam rheometer test for rheological analysis of asphalt emulsion-cement mastics in cold in-place recycling. Construction and Building Materials, 222, 484–492.
   Web of Science ®Google Scholar
• Graziani, A., et al., 2016. Effect of curing on the physical and mechanical properties of cold-recycled bituminous mixtures. Materials and Design, 95, 358–369.
   Web of Science ®Google Scholar
• Grilli, A., et al., 2016. Volumetric properties and influence of water content on the compactability of cold recycled mixtures. Materials and Structures/Materiaux et Constructions, 49 (10), 4349–4362.
   Web of Science ®Google Scholar
• Hajiloo, H.R., et al., 2022. Crack resistance of fiber-reinforced asphalt mixtures: effect of test specimen and test condition. Fatigue and Fracture of Engineering Materials and Structures, 45 (3), 921–937.
   Web of Science ®Google Scholar
• He, J., et al., 2022. Using two and three-parameter Weibull statistical model for predicting the loading rate effect on low-temperature fracture toughness of asphalt concrete with the ENDB specimen. Theoretical and Applied Fracture Mechanics, 121 (5), 103471.
   Google Scholar
• Huang, B., Shu, X., and Zuo, G, 2013. Using notched semi circular bending fatigue test to characterize fracture resistance of asphalt mixtures. Engineering Fracture Mechanics, 109, 78–88.
   Web of Science ®Google Scholar
• Jafari Haghighatpour, P., and Aliha, M.R.M., 2022. Effect of marshal and gyratory compaction methods on cracking characteristics of hot mix asphalt concrete materials under all three basic modes of fracture. Theoretical and Applied Fracture Mechanics, 117 (12), 103207.
   Google Scholar
• Jahren, C.T., et al., 1998. Review of cold in-place asphalt recycling in Iowa. Transportation Conference Proceedings, (Figure 1), 259–263.
   Google Scholar
• Kavussi, A., and Modarres, A, 2010. Laboratory fatigue models for recycled mixes with bitumen emulsion and cement. Construction and Building Materials, 24 (10), 1920–1927.
   Web of Science ®Google Scholar
• Li, C., Wang, L., and Wang, X. xiao, 2017. Crack and crack growth behavior analysis of asphalt mixtures based on the digital speckle correlation method. Construction and Building Materials, 147, 227–238.
   Web of Science ®Google Scholar
• Majidifard, H., et al., 2021. Development of a balanced cracking index for asphalt mixtures tested in semi-circular bending with load-LLD measurements. Measurement, 173 (10), 108658.
   Google Scholar
• Ministry of Transport of the People’s Republic of China, 2019. Technical specifications for construction of highway asphalt pavements. [In Chinese.] JTG F40. Beijing: China Communications Press.
   Google Scholar
• Modarres, A., Rahimzadeh, M., and Zarrabi, M, 2014. Field investigation of pavement rehabilitation utilizing cold in-place recycling. Resources, Conservation and Recycling, 83, 112–120.
   Web of Science ®Google Scholar
• Moghadas Nejad, F., et al., 2017. Investigating the mechanical and fatigue properties of sustainable cement emulsified asphalt mortar. Journal of Cleaner Production, 156, 717–728.
   Web of Science ®Google Scholar
• Moniri, A., et al., 2021. Laboratory study of the effect of oil-based recycling agents on high RAP asphalt mixtures. International Journal of Pavement Engineering, 22 (11), 1423–1434.
   Web of Science ®Google Scholar
• Najjar, S., et al., 2020. Low temperature fracture resistance of cement emulsified asphalt mortar under mixed mode I/III loading. Theoretical and Applied Fracture Mechanics, 110 (10), 102800.
   Google Scholar
• Najjar, S., et al., 2022. Mixed mode-I/II fatigue performance of cement emulsified asphalt mortar: experimental and statistical analysis at intermediate temperature. Construction and Building Materials, 350 (8), 128835.
   Google Scholar
• Najjar, S., et al., 2022b. Experimental and statistical exploring for mixed-mode (I&II) fracture behavior of cement emulsified asphalt mortar under freeze–thaw cycles and aging condition. Theoretical and Applied Fracture Mechanics, 122 (6), 103643.
   Google Scholar
• Najjar, S., et al., 2022c. Aging effect on the mixed-mode (I/III) fracture toughness of cement emulsified asphalt composite: experimental and statistical investigation. Engineering Fracture Mechanics, 264 (4), 108292.
   Google Scholar
• Niazi, Y., and Jalili, M, 2009. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion. Construction and Building Materials, 23 (3), 1338–1343.
   Web of Science ®Google Scholar
• Oruc, S., Celik, F., and Akpinar, M.V, 2007. Effect of cement on emulsified asphalt mixtures. Journal of Materials Engineering and Performance, 16 (5), 578–583.
   Web of Science ®Google Scholar
• Ouyang, J., et al., 2018a. Effect of cement on the demulsifying behavior of over-stabilized asphalt emulsion during mixing. Construction and Building Materials, 177, 252–260.
   Web of Science ®Google Scholar
• Ouyang, J., et al., 2019a. Effect of water content on volumetric and mechanical properties of cement bitumen emulsion mixture. Journal of Materials in Civil Engineering, 31 (6), 04019085.
   Web of Science ®Google Scholar
• Ouyang, J., et al., 2019b. Strength improvement additives for cement bitumen emulsion mixture. Construction and Building Materials, 198, 456–464.
   Web of Science ®Google Scholar
• Ouyang, J., Zhao, J., and Tan, Y, 2018b. Modeling mechanical properties of cement asphalt emulsion mortar with different asphalt to cement ratios and temperatures. Journal of Materials in Civil Engineering, 30 (10), 04018263.
   Web of Science ®Google Scholar
• Saha, G., and Biligiri, K.P, 2016. Fracture properties of asphalt mixtures using semi-circular bending test: a state-of-the-art review and future research. Construction and Building Materials, 105, 103–112.
   Web of Science ®Google Scholar
• Tan, Y., et al., 2014. Studying the strain field distribution of asphalt mixture with the digital speckle correlation method. Road Materials and Pavement Design, 15 (1), 90–101.
   Web of Science ®Google Scholar
• Wang, Z., et al., 2020. Early-stage road property improvements of cold recycled asphalt emulsion mixture with microwave technology. Journal of Cleaner Production, 263, 121451.
   Web of Science ®Google Scholar
• Wang, Z., and Sha, A, 2010. Micro hardness of interface between cement asphalt emulsion mastics and aggregates. Materials and Structures/Materiaux et Constructions, 43 (4), 453–461.
   Web of Science ®Google Scholar
• Xiao, J., et al., 2019. Effect of cement and emulsified asphalt contents on the performance of cement-emulsified asphalt mixture. Construction and Building Materials, 220, 577–586.
   Web of Science ®Google Scholar
• Yang, W., et al., 2021. Effect of curing and compaction on volumetric and mechanical properties of cold-recycled mixture with asphalt emulsion under different cement contents. Construction and Building Materials, 297, 123699.
   Web of Science ®Google Scholar