Bitumen stress relaxation modulus and its slope as performance-based criteria to control low temperature cracking

References

• Anderson, D.A., et al., 2001. Low-temperature thermal cracking of asphalt binders as ranked by strength and fracture properties. Transportation Research Record: Journal of the Transportation Research Board, 1766 (1), 1–6.
   Google Scholar
• Anderson, D.A., and Kennedy, T., 1993. Development of SHRP binder specification. Journal of the Association of Asphalt Paving Technologists, 62, 481–507.
   Google Scholar
• Anton Paar, 2018. Temperature measuring sets. Reference Guide. Documents number C921B031EN-D.
   Google Scholar
• Boutin, G., and Lupien, C., 2000. Thermal cracking of asphalt pavement. In: 2nd Eurasphalt and Eurobitume congress, 20–22 September 2000. Barcelona, Spain, 45–59.
   Google Scholar
• Büchner, J., et al., 2019. On low temperature binder testing using DSR 4 mm geometry. Materials and Structures, 52 (6), 113.
   Web of Science ®Google Scholar
• Büchner, J., et al., 2022. Interlaboratory study on low temperature asphalt binder testing using dynamic shear rheometer with 4 mm diameter parallel plate geometry. Road Materials and Pavement Design, 23 (4), 890–906.
   Web of Science ®Google Scholar
• Büchner, J., Sigwarth, T., and Wistuba, M.P., 2021a. Testing conditions for asphalt binder testing using dynamic shear rheometer with 4 mm diameter parallel plate geometry. 1–13.
   Google Scholar
• Büchner, J., Sigwarth, T., and Wistuba, M.P., 2021b. Dynamic shear rheometer testing of asphalt binder using 4 mm parallel plate geometry at low temperature.
   Google Scholar
• Büchner, J., and Wistuba, M., 2022. Analysis of low temperature relaxation properties of asphalt binder and asphalt mastic using a dynamic shear Rheometer. In: Hoff, Mork, and Saba, eds. Eleventh international conference on the bearing capacity of roads, railways and airfields, Volume 2. London: CRC Press, 508–516.
   Google Scholar
• Budziński, B., et al., 2023. Influence of bitumen grade and air voids on low-temperature cracking of asphalt. Case Studies in Construction Materials, 19 (May), e02255.
   Google Scholar
• Buttlar, W.G., and Roque, R., 1994. Development and evaluation of the strategic highway research program measurement and analysis system for indirect tensile testing at Low temperature. In: Transportation research record No. 1454, asphalt concrete mixture design and performance. Washington, DC: National Academy Press, 163–171.
   Google Scholar
• Dongré, R., et al., 1997. Evaluation of superpave binder specification with performance of polymer-modified asphalt pavements. In: R.N. Jester, ed. Progress of superpave (superior performing asphalt pavement): evaluation and implementation. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 80-80-21.
   Google Scholar
• Farrar, M., et al., 2015. Determining the low-temperature rheological properties of asphalt binder using a dynamic shear rheometer (DSR). Laramie, WY.
   Google Scholar
• Gražulytė, J., et al., 2017. Methods and criteria for evaluation of asphalt mixture resistance to low temperature cracking. Baltic Journal of Road and Bridge Engineering, 12 (2), 135–144.
   Web of Science ®Google Scholar
• Gražulytė, J., et al., 2021. Analysis of 4-mm DSR tests: calibration, sample preparation, and evaluation of repeatability and reproducibility. Road Materials and Pavement Design, 22 (3), 557–571.
   Web of Science ®Google Scholar
• Gražulytė, J., and Vaitkus, A., 2017. Analysis of methods and criteria for evaluation of bitumen performance at low temperatures. In: Proccedings of 10th international conference ‘environmental engineering’. VGTU Technika.
   Google Scholar
• Gražulytė, J., and Vaitkus, A., 2020. First step to the development of performance based criteria for bitumen resistance to low temperature cracking. In: 7th E&E Congress. Euroasphalt & Eurobitume, 9.
   Google Scholar
• Gražulytė, J., Vaitkus, A., and Kravcovas, I., 2016. Bitumen selection approach assessing its resistance to Low temperature cracking. In: The 4rd international conference on road and rail infrastructures. 23–25 May 2016. Šibenik, Croatia, 643–649.
   Google Scholar
• Hesp, S.A.M., 2004. Development of a fracture mechanics-based asphalt binder test method for low temperature performance prediction. Highway IDEA Project 84.
   Google Scholar
• Hesp, S.A.M., et al., 2009a. Five year performance review of a northern Ontario pavement trial: validation of Ontario’s double-edge-notched tension (DENT) and extended bending beam rheometer (BBR) test methods. In: Canadian technical asphalt association proceedings of the annual conference, 99–126.
   Google Scholar
• Hesp, S.A.M., et al., 2009b. Asphalt pavement cracking: analysis of extraordinary life cycle variability in eastern and northeastern Ontario. International Journal of Pavement Engineering, 10 (3), 209–227.
   Web of Science ®Google Scholar
• Hofer, K., et al., 2023. Low-temperature characterization of bitumen and correlation to chemical properties. Construction and Building Materials, 366 (December 2022), 130202.
   Google Scholar
• Iliuta, S., et al., 2004. Field validation study of low-temperature performance grading tests for asphalt binders. Transportation Research Record: Journal of the Transportation Research Board, 1875, 14–21.
   Google Scholar
• Kim, Y.S., et al., 2022. Asphalt binder testing at low temperature: three-point bending beam test in dynamic shear rheometer. Frontiers in Materials, 9 (February), 1–14.
   Google Scholar
• Kim, S.-S., Wysong, Z., and Kovach, J., 2006. Low-temperature thermal cracking of asphalt binder by asphalt binder cracking device. Transportation Research Record: Journal of the Transportation Research Board, 1962, 28–35.
   Google Scholar
• Kluttz, R.Q., and Dongré, R.N., 1997. Effect of SBS polymer modification on the low-temperature cracking of asphalt pavements. In: Asphalt science and technology. New York: Marcel Dekker, 217–233.
   Google Scholar
• Komaragiri, S., et al., 2022. Using the dynamic shear rheometer for low-temperature grading of asphalt binders. Journal of Testing and Evaluation, 50 (3), 20210277.
   Web of Science ®Google Scholar
• Läuger, J., 2010. Radial compliance in oscillatory measurements. In: Technical Note Anton Paar Rheometers.
   Google Scholar
• Laukkanen, O.-V., 2017. Small-diameter parallel plate rheometry: a simple technique for measuring rheological properties of glass-forming liquids in shear. Rheologica Acta, 56 (7–8), 661–671.
   Web of Science ®Google Scholar
• Lu, X., Uhlback, P., and Soenen, H., 2017. Investigation of bitumen low temperature properties using a dynamic shear rheometer with 4 mm parallel plates. International Journal of Pavement Research and Technology, 10 (1), 15–22.
   Google Scholar
• Lytton, R.L., et al., 1993. Development and validation of performance prediction models and specifications for asphalt binders and paving mixes. Washington, DC. Report SHRP-A-357.
   Google Scholar
• Marasteanu, M., et al., 2016. On the representative volume element of asphalt concrete at low temperature. Mechanics of Time-Dependent Materials, 20 (3), 343–366.
   Web of Science ®Google Scholar
• Petersen, J.C., et al., 1994a. Binder characterization and evaluation. Volume 1. Washington, DC. No SHRP-A-367. SHRP-A-367.
   Google Scholar
• Petersen, J.C., et al., 1994b. Binder characterisation and evaluation, Vol. 4: test methods. Washington, DC: Strategic Highway Research Program. National Research Council. SHRP-A-370.
   Google Scholar
• Riccardi, C., et al., 2017. Comparison of DSR and BBR tests for determining the Performance Grade (PG) of asphalt binder at low temperature. In: Bearing capacity of roads, railways and airfields. Taylor & Francis Group 6000 broken sound parkway NW, Suite 300: CRC Press, 267–271.
   Google Scholar
• Rys, D., et al., 2023. Factors affecting low-temperature cracking of asphalt pavements: analysis of field observations using the ordered logistic model. International Journal of Pavement Engineering, 24 (2), 1–11.
   Google Scholar
• Shahin, M.Y., and McCullough, B.F., 1972. Prediction of low-temperature and thermal fatigue cracking in flexible pavements. Research Report No. 123-14.
   Google Scholar
• Sui, C., et al., 2010. New technique for measuring low-temperature properties of asphalt binders with small amounts of material. Transportation Research Record: Journal of the Transportation Research Board, 2179 (1), 23–28.
   Google Scholar
• Sui, C., et al., 2011. New low-temperature performance-grading method. Transportation Research Record: Journal of the Transportation Research Board, 2207, 43–48.
   Web of Science ®Google Scholar
• Velasquez, R., et al., 2011. Bending beam rheometer testing of asphalt mixtures. International Journal of Pavement Engineering, 12 (5), 461–474.
   Web of Science ®Google Scholar
• Vinson, T.S., Janoo, V.C., and Haas, C.G., 1989. Low temperature and thermal fatigue cracking. Washington, DC. SHRP Summary Report No. A-003A.
   Google Scholar
• Wang, H., et al., 2021. Investigating the high- and low-temperature performance of warm crumb rubber–modified bituminous binders using rheological tests. Journal of Transportation Engineering, Part B: Pavements, 147 (4).
   Web of Science ®Google Scholar
• Zofka, A., et al., 2005. Simple method to obtain asphalt binders low temperature properties from asphalt mixtures properties. Journal of the Association of Asphalt Paving Technologists, 74, 255–282.
   Google Scholar