Development of an asphalt mixture with polymer incorporation modified by industrial graphene nanoplatelets for high-performance to rutting

References

• AASHTO, 2017a. Aashto T 240: 2017. Standard method of test for effect of heat and air on a moving film of asphalt (Rolling thin-film oven test).
   Google Scholar
• AASHTO, 2017b. M 323: 2017. Standard specification for superpave volumetric mix design.
   Google Scholar
• AASHTO, 2017c. R 35: 2017. Standard practice for Superpave volumetric design for hot-mix asphalt (HMA).
   Google Scholar
• AASHTO, 2017d. AASHTO T 176: 2017. Standard method of test for plastic fines in graded aggregates and soils by use of the sand equivalent test.
   Google Scholar
• AASHTO, 2019a. T 350: 2019. Standard method of test for Multiple Stress Creep Recovery (MSCR) test of asphalt binder using a Dynamic Shear Rheometer (DSR).
   Google Scholar
• AASHTO, 2019b. R 30: 2019. Mixture conditioning of hot-mix asphalt.
   Google Scholar
• AASHTO, 2020a. M 332: 2020. Standard specification for performance-graded asphalt binder using Multiple Stress Creep Recovery (MSCR) test.
   Google Scholar
• AASHTO, 2020b. R 92: 2020. Standard specification for performance-graded asphalt binder using Multiple Stress Creep Recovery (MSCR) test.
   Google Scholar
• AASHTO, 2021. AASHTO T 112: 2021. Standard method of test for clay lumps and friable particles in aggregate.
   Google Scholar
• ABNT - Associação Brasileira de Normas Técnicas, 2012. NBR 6296: 2012. Semi-solid bituminous products — Determination of density and relative density (in portuguese).
   Google Scholar
• ABNT - Associação Brasileira de Normas Técnicas, 2015a. NBR 11341: 2015. Petroleum products – Determination of the flash and fire points by Cleveland open cup (in portuguese).
   Google Scholar
• ABNT - Associação Brasileira de Normas Técnicas, 2015b. NBR 14855: 2015. Asphalt binder – Determination of solubility in trichloroethylene (in portuguese).
   Google Scholar
• ABNT - Associação Brasileira de Normas Técnicas, 2016. NBR 6560: 2016. Asphaltic binders – Determination of the softening point – Ring-and-ball method (in portuguese).
   Google Scholar
• ABNT - Associação Brasileira de Normas Técnicas, 2017. NBR 6576: 2017. Betuminous materials – Determination of penetration (in portuguese).
   Google Scholar
• ABNT - Associação Brasileira de Normas Técnicas, 2022. NBR 15086: 2022. Bituminous materials – Determination of the elastic recovery by ductilometer of elastomeric polymer and ground tyre rubber modified asphalt (in portuguese).
   Google Scholar
• Adamu, M., et al., 2022. Compressive behavior and durability performance of high-volume fly-ash concrete with plastic waste and graphene nanoplatelets by using response-surface methodology. Journal of Materials in Civil Engineering, 34 (9).
   Web of Science ®Google Scholar
• Adnan, A.M., et al., 2021. Impact of graphene oxide on zero shear viscosity, fatigue life and low-temperature properties of asphalt binder. Materials, 14 (11), 3073.
   PubMed Web of Science ®Google Scholar
• AFNOR, 2018. NF EN 12697-24 – Bituminous mixtures, test methods for hot mix asphalt - Part 24: Resistance to Fatigue.
   Google Scholar
• AFNOR, 2020. NF EN 12697-22 - Bituminous mixtures, test methods for hot mix asphalt - Part 22: Bituminous mixtures. Test methods: Wheel tracking.
   Google Scholar
• AFNOR, 2022. NF EN 12697-33 - Bituminous mixtures, test methods for hot mix asphalt - Part 33: Bituminous mixtures - test method: specimen prepared by roller compactor.
   Google Scholar
• Al-Abdul Wahhab, H.I., Dalhat, M.A., and Habib, M.A., 2017. Storage stability and high-temperature performance of asphalt binder modified with recycled plastic. Road Materials and Pavement Design, 18 (5), 1117–1134.
   Web of Science ®Google Scholar
• Ashish, P.K. and Singh, D., 2018. High- and intermediate-temperature performance of asphalt binder containing carbon nanotube using different rheological approaches. Journal of Materials in Civil Engineering, 30 (1), 1–14.
   Web of Science ®Google Scholar
• Asphalt Institute, 2012. Asphalt binder testing. Manual Series n° 25 (MS-25).
   Google Scholar
• ASTM, 2015a. D4402/D4402M: 2015. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer.
   Google Scholar
• ASTM, 2015b. D7175: 2015. Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer.
   Google Scholar
• ASTM, 2015c. ASTM C127: 2015. Standard test method for density, relative density (specific gravity), and absorption of coarse aggregate.
   Google Scholar
• ASTM, 2016a. D6373: Standard specification for performance graded asphalt binder.
   Google Scholar
• ASTM, 2016b. C561: 2016. Standard test method for ash in a graphite sample.
   Google Scholar
• ASTM, 2017a. D1895: 2017. Standard test methods for apparent density, bulk factor, and pourability of plastic materials.
   Google Scholar
• ASTM, 2017b. ASTM C131: 2017. Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine.
   Google Scholar
• ASTM, 2017c. ASTM D5821: 2017. Standard test method for determining the percentage of fractured particles in coarse aggregate.
   Google Scholar
• ASTM, 2017d. ASTM C1252: 2017. Standard test methods for uncompacted void content of fine aggregate (as influenced by particle shape, surface texture, and grading).
   Google Scholar
• ASTM, 2018. ASTM C88: 2018. Standard test method for soundness of aggregates by use of sodium sulfate or magnesium sulfate.
   Google Scholar
• ASTM, 2020a. D7405: 2020. Standard test method for Multiple Stress Creep and Recovery (MSCR) of asphalt binder using a dynamic shear rheometer.
   Google Scholar
• ASTM, 2020b. D7173: 2020. Standard practice for determining the separation tendency of polymer from polymer modified asphalt.
   Google Scholar
• Bøggild, P., 2018. The war on fake graphene. Nature, 562 (7728), 502–503.
   PubMed Web of Science ®Google Scholar
• Boudjellal, A., et al., 2021. Preparation and characterization of Alfa fibers/graphene nanoplatelets hybrid for advanced applications. Materials Letters, 289, 129379.
   Web of Science ®Google Scholar
• Broering, W.B., 2020. Efeitos da incorporação de nanopartículas de óxido de alumínio na condutividade térmica e nas propriedades reológicas de ligantes asfálticos. Master's dissertation. Brazil: Federal University of Santa Catarina (in portuguese).
   Google Scholar
• Broering, W.B., de Melo, J.V.S., and Manfro, A.L., 2022. Incorporation of nanoalumina into a polymeric asphalt matrix: reinforcement of the nanostructure, improvement of phase stability, and amplification of rheological parameters. Construction and Building Materials, 320, 126261.
   Web of Science ®Google Scholar
• Cadorin, N.D., et al., 2021. Asphalt nanocomposite with titanium dioxide: mechanical, rheological and photoactivity performance. Construction and Building Materials, 289, 123178.
   Web of Science ®Google Scholar
• Chen, Y., et al., 2020. Rhysiological properties of graphene nanoplatelets/rubber crowd composite modified asphalt. Construction and Building Materials, 261, 120505.
   Web of Science ®Google Scholar
• Chen, Z., et al., 2021. Influence of multidimensional nanomaterials composite form on thermal and ultraviolet oxidation aging resistances of SBS modified asphalt. Construction and Building Materials, 273, 122054.
   Web of Science ®Google Scholar
• Cheng, L., et al., 2020. Chemical, rheological and aging characteristic properties of Xinjiang rock asphalt-modified bitumen. Construction and Building Materials, 240, 117908.
   Web of Science ®Google Scholar
• de Melo, J.V.S. and Trichês, G., 2016. Effects of organophilic nanoclay on the rheological behavior and performance leading to permanent deformation of asphalt mixtures. Journal of Materials in Civil Engineering, 28 (11), 1–9.
   Web of Science ®Google Scholar
• de Melo, J.V.S. and Trichês, G., 2017. Evaluation of properties and fatigue life estimation of asphalt mixture modified by organophilic nanoclay. Construction and Building Materials, 140, 364–373.
   Web of Science ®Google Scholar
• de Melo, J.V.S., Trichês, G., and de Rosso, L.T., 2018. Experimental evaluation of the influence of reinforcement with Multi-Walled Carbon Nanotubes (MWCNTs) on the properties and fatigue life of hot mix asphalt. Construction and Building Materials, 162, 369–382.
   Web of Science ®Google Scholar
• Dissanayake, K.T., et al., 2014. Synthesis of graphene and graphene oxide-based nanocomposites and their characterization. In: SAITM research symposium on engineering advancements, 75–78.
   Google Scholar
• DNER, 1994. DNER-ME 078: 1994. Agregado graúdo – adesividade a ligante betuminoso (in portuguese).
   Google Scholar
• Duan, S., et al., 2019. Synthesis and evaluation of high-temperature properties of butylated graphene oxide composite incorporated SBS (C 4 H 9 -GO/SBS)-modified asphalt. Journal of Applied Polymer Science, 136 (46), 1–13.
   Web of Science ®Google Scholar
• Eisa, M.S., et al., 2021. Laboratory evaluation of mechanical properties of modified asphalt and mixture using Graphene Platelets (GnPs). Materials, 14 (19), 5599.
   PubMed Web of Science ®Google Scholar
• Erkuş, Y. and Vural Kök, B., 2023. Comparison of physical and rheological properties of calcium carbonate-polypropylene composite and SBS modified bitumen. Construction and Building Materials, 366 (October 2022), 130196.
   Google Scholar
• Faccin, C., et al., 2021. Mapas de grau de desempenho (PG) de ligantes asfálticos para o Brasil. In: C. M. de Oliveira, C. S. Pitombo, and S. N. Istre, eds. 35° Congresso de Pesquisa e Ensino em Transporte da ANPET. Online: Associação Nacional de Pesquisa e Ensino em Transportes, 933–943.
   Google Scholar
• Faniyi, I.O., et al., 2019. The comparative analyses of reduced graphene oxide (RGO) prepared via green, mild and chemical approaches. SN Applied Sciences, 1 (10), 1181.
   Web of Science ®Google Scholar
• Farivar, F., et al., 2021. Thermogravimetric analysis (TGA) of graphene materials: effect of particle size of graphene, graphene oxide and graphite on thermal parameters. C, 7 (2), 41.
   Google Scholar
• Gadipelli, S. and Guo, Z.X., 2015. Graphene-based materials: synthesis and gas sorption, storage and separation. Progress in Materials Science, 69, 1–60.
   Web of Science ®Google Scholar
• Gulisano, F., et al., 2020. Microwave healing performance of asphalt mixture containing Electric Arc Furnace (EAF) slag and Graphene Nanoplatelets (GNPs). Applied Sciences, 10 (4), 1428.
   Google Scholar
• Hadi, A., et al., 2018. Graphene nanosheets preparation using magnetic nanoparticle assisted liquid phase exfoliation of graphite: the coupled effect of ultrasound and wedging nanoparticles. Ultrasonics Sonochemistry, 44, 204–214.
   PubMed Web of Science ®Google Scholar
• Hafeez, M., et al., 2019. Experimental investigation into the structural and functional performance of Graphene Nano-Platelet (GNP)-doped asphalt. Applied Sciences (Switzerland), 9 (4), 1–19.
   Web of Science ®Google Scholar
• Han, M., et al., 2018. Effect of polystyrene grafted graphene nanoplatelets on the physical and chemical properties of asphalt binder. Construction and Building Materials, 174, 108–119.
   Web of Science ®Google Scholar
• He, J., et al., 2022. A review on Graphene/GNPs/GO modified asphalt. Construction and Building Materials, 330, 127222.
   Web of Science ®Google Scholar
• Hosseini, M.A., Malekie, S., and Ebrahimi, N., 2020. The analysis of linear dose-responses in gamma-irradiated graphene oxide: can FTIR analysis be considered a novel approach to examining the linear dose-responses in carbon nanostructures? Radiation Physics and Chemistry, 176, 109067.
   Web of Science ®Google Scholar
• Hu, K., et al., 2022. Mechanistic study of graphene reinforcement of rheological performance of recycled polyethylene modified asphalt: a new observation from molecular dynamics simulation. Construction and Building Materials, 320, 126263.
   Web of Science ®Google Scholar
• Ibrahim, S.H., et al., 2018. The impact of road pavement on Urban Heat Island (UHI) phenomenon. International Journal of Technology, 9 (8), 1597.
   Google Scholar
• ISO, 2003. International Organization of Standardization. ISO 868: 2003. Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness).
   Google Scholar
• ISO, 2011. International Organization of Standardization. ISO 1133-1: 2011. Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method.
   Google Scholar
• ISO, 2017. International Organization of Standardization. ISO 37: 2017. Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties.
   Google Scholar
• ISO, 2018. International Organization of Standardization. ISO 2781: 2018. Rubber, vulcanized or thermoplastic — Determination of density.
   Google Scholar
• Jia, X. and Peng, Y., 2020. Preparation and property analysis of asphalt modified by GNPs. New Chemistry Materials, 48 (7), 244–249.
   Google Scholar
• Kauling, A.P., et al., 2018. The worldwide graphene flake production. Advanced Materials, 30 (44), 1–6.
   Web of Science ®Google Scholar
• Kong, W., et al., 2019. Path towards graphene commercialization from lab to market. Nature Nanotechnology, 14 (10), 927–938.
   PubMed Web of Science ®Google Scholar
• Kovtun, A., et al., 2019. Benchmarking of graphene-based materials: real commercial products versus ideal graphene. 2D Materials, 6 (2), 025006.
   Google Scholar
• Kumar, S., Sharma, N., and Singh, K.K., 2023. Artificial neural network technique to assess tribological performance of GFRP composites incorporated with graphene nano-platelets. Tribology International, 179, 108194.
   Web of Science ®Google Scholar
• Kuna, K. and Kelly, K., 2019. Flexible pavement design for hot climates – a case study. Proceedings of the Institution of Civil Engineers - Transport, 172 (3), 164–173.
   Web of Science ®Google Scholar
• LCPC, 2007. Manuel LPC d’aide à la formulation des enrobés. Paris, France: Laboratoire central des ponts et chaussées.
   Google Scholar
• Le, J., Marasteanu, M., and Turos, M., 2016. Graphene nanoplatelet (GNP) reinforced asphalt mixtures: a novel multifunctional pavement material. Final Report for NCHRP IDEA Project 173.
   Google Scholar
• Le, J.-L., Marasteanu, M.O., and Turos, M., 2020. Mechanical and compaction properties of graphite nanoplatelet-modified asphalt binders and mixtures. Road Materials and Pavement Design, 21 (7), 1799–1814.
   Web of Science ®Google Scholar
• Li, C., et al., 2018a. Improved microwave heating and healing properties of bitumen by using nanometer microwave-absorbers. Construction and Building Materials, 189, 757–767.
   Web of Science ®Google Scholar
• Li, J., et al., 2018b. Comparative analysis, road performance and mechanism of modification of polystyrene graphene nanoplatelets (PS-GNPs) and octadecyl amine graphene nanoplatelets (ODA-GNPs) modified SBS incorporated asphalt binders. Construction and Building Materials, 193, 501–517.
   Web of Science ®Google Scholar
• Li, X., et al., 2021a. Properties and modification mechanism of asphalt with graphene as modifier. Construction and Building Materials, 272, 121919.
   Web of Science ®Google Scholar
• Li, Y., et al., 2021b. Anti-rutting performance evaluation of modified asphalt binders: a review. Journal of Traffic and Transportation Engineering (English Edition), 8 (3), 339–355.
   Google Scholar
• Li, Z., et al., 2021c. Carbon nanomaterials for enhancing the thermal, physical and rheological properties of asphalt binders. Materials, 14 (10), 2585.
   PubMed Web of Science ®Google Scholar
• Li, K., Ren, H., and Huang, W., 2021d. Effect of Graphene Nanoplatelets (GNPs) on fatigue properties of asphalt mastics. Materials, 14 (17), 4864.
   PubMed Web of Science ®Google Scholar
• Liu, J., et al., 2021a. Rheological properties of SBS modified asphalt incorporated polyvinylpyrrolidone stabilized graphene nanoplatelets. Construction and Building Materials, 298, 123850.
   Web of Science ®Google Scholar
• Liu, J., et al., 2021b. Rheological, healing and microstructural properties of unmodified and crumb rubber modified asphalt incorporated with graphene/carbon black composite. Construction and Building Materials, 305, 124512.
   Web of Science ®Google Scholar
• Manfro, A.L., 2022. Influência da incorporação de nanopartículas de carbonato de cálcio no concreto asfáltico quanto à resistência à deformação permanente e aos efeitos deletérios da ação da água. Master's dissertation. Federal University of Santa Catarina, Brazil (in portuguese).
   Google Scholar
• Manfro, A.L., et al., 2022. Permanent deformation performance under moisture effect of an asphalt mixture modified by calcium carbonate nanoparticles. Construction and Building Materials, 342, 128087.
   Web of Science ®Google Scholar
• Melo, J.V.S. de, 2014. Desenvolvimento e Estudo do Comportamento Reológico e Desempenho Mecânico de Concretos Asfálticos Modificados com Nanocompósitos. Thesis (PhD). Federal University of Santa Catarina, Brazil (in portuguese).
   Google Scholar
• Melo, J.V.S. de and Trichês, G., 2016. Evaluation of rheological behavior and performance to permanent deformation of nanomodified asphalt mixtures with carbon nanotubes. Canadian Journal of Civil Engineering, 43 (5), 472–479.
   Web of Science ®Google Scholar
• Meng, Y., et al., 2022. Study on the performance and sustainability of modified waste crumb rubber and steel slag powder/SBS composite modified asphalt mastic. Journal of Cleaner Production, 338, 130563.
   Web of Science ®Google Scholar
• Mirsepahi, M., Tanzadeh, J., and Ghanoon, S.A., 2020. Laboratory evaluation of dynamic performance and viscosity improvement in modified bitumen by combining nanomaterials and polymer. Construction and Building Materials, 233, 117183.
   Web of Science ®Google Scholar
• Mokoena, R., et al., 2022. African case studies: developing pavement temperature maps for performance-graded asphalt bitumen selection. Sustainability, 14 (3), 1048.
   Web of Science ®Google Scholar
• Moreno-Navarro, F., et al., 2018. Mechanical and thermal properties of graphene modified asphalt binders. Construction and Building Materials, 180, 265–274.
   Web of Science ®Google Scholar
• Nagaraju, P., et al., 2020. Surfactant-free synthesis of Nb2O5 nanoparticles anchored graphene nanocomposites with enhanced electrochemical performance for supercapacitor electrodes. Nanomaterials, 10 (1), 160.
   Web of Science ®Google Scholar
• Nanjing XFNANO Materials, 2018. TDF of 10-15 graphene nanoplates: XFQ021-Graphene Nanoplates.
   Google Scholar
• Nazki, Ahmad, et al., 2020. Rheological properties and thermal conductivity of bitumen binders modified with graphene. Construction and Building Materials, 238, 117693.
   Web of Science ®Google Scholar
• Niu, D., et al., 2020. Molecular structure change and anti-aging performance of WFO-CR composite modified asphalts [WFO-CR改性沥青的分子结构变化与抗老化性能]. Shenzhen Daxue Xuebao (Ligong Ban)/Journal of Shenzhen University Science and Engineering, 37 (6), 589–596.
   Google Scholar
• Pan, P., et al., 2014. Influence of graphite on the thermal characteristics and anti-ageing properties of asphalt binder. Construction and Building Materials, 68, 220–226.
   Web of Science ®Google Scholar
• Paolo, I.L., et al., 2019. Tribological characterization of Graphene Nano-Platelet (GNP) bituminous binders. Airfield and Highway Pavements, 2019, 96–105.
   Google Scholar
• Papagiannakis, A.T. and Masad, E.A., 2008. Paviment design and materiais. 1st ed. Hoboken: John Wiley & Sons, Inc.
   Google Scholar
• Picanço, H. M., Cartaxo, E. F., and Frota, C.A., 2011. Refletividade, radiação solar e temperatura em diferentes tipos de revestimentos das vias urbanas no município de Manaus (AM). In: J. V. Merighi and R. M. Fortes, eds. 5^o Congresso de Infraestrutura de Transportes. São Paulo: Associação Nacional de Infraestrutura de Transportes, 1–13.
   Google Scholar
• Polaczyk, P., et al., 2023. Laboratory investigation of graphene modified asphalt efficacy to pavement performance. Road Materials and Pavement Design, 24 (sup1), 587–607.
   Google Scholar
• Pollard, A.J., et al., 2017. Characterisation of the structure of graphene. Good Practice Guide No 145. Teddington, UK: National Physical Laboratory (NPL).
   Google Scholar
• Poorsargol, M., et al., 2019. Dispersion of graphene using surfactant mixtures: Experimental and molecular dynamics simulation studies. Applied Surface Science, 464, 440–450.
   Web of Science ®Google Scholar
• Prolongo, S.G., et al., 2014. Graphene nanoplatelets thickness and lateral size influence on the morphology and behavior of epoxy composites. European Polymer Journal, 53, 292–301.
   Web of Science ®Google Scholar
• Ruiz, S., et al., 2019. Antimicrobial films based on nanocomposites of Chitosan/Poly(vinyl alcohol)/Graphene oxide for biomedical applications. Biomolecules, 9 (3), 109.
   PubMed Web of Science ®Google Scholar
• Russo, F., et al., 2022. A complete study on an asphalt concrete modified with graphene and recycled hard-plastics: a case study. Case Studies in Construction Materials, 17, e01437.
   Google Scholar
• Salvo, C., et al., 2019. Enhanced mechanical and electrical properties of novel graphene reinforced copper matrix composites. Journal of Alloys and Compounds, 777, 309–316.
   Web of Science ®Google Scholar
• Schuster, L., 2020. Avaliação da contribuição da lã de aço associada ao nanotubo de carbono na reparação de danos em misturas asfálticas submetidas ao aquecimento por micro-ondas. Master’s dissertation. Federal University of Santa Catarina, Brazil (in portuguese).
   Google Scholar
• Schuster, L., Staub de Melo, J.V., and Villena Del Carpio, J.A., 2023. Effects of the associated incorporation of steel wool and carbon nanotube on the healing capacity and mechanical performance of an asphalt mixture. International Journal of Fatigue, 168, 107440.
   Web of Science ®Google Scholar
• Shah, J., Jan, M.R., and Rahman, I., 2020. Dispersive solid phase microextraction of Fenoxaprop-p-ethyl herbicide from water and food samples using magnetic graphene composite. Journal of Inorganic and Organometallic Polymers and Materials, 30 (5), 1716–1725.
   Web of Science ®Google Scholar
• Shalaby, A., et al., 2015. Structural analysis of reduced graphene oxide by transmission electron microscopy. Bulgarian Chemical Communications, 47 (1), 291–295.
   Google Scholar
• Shamami, Ghalandari, et al., 2023. Evaluation of the effects of graphene-nanoplatelets on the rutting, fatigue performance, and moisture sensitivity of hot-mix asphalt. International Journal of Pavement Research and Technology, 16.
   Google Scholar
• Silva, A.C.L. da, Frota, C.A. da, and Frota, H.O. da, 2015. Módulo complexo de compósitos asfálticos com argila calcinada sob flexão a quatro pontos. Matéria (Rio de Janeiro), 20 (2), 436–451.
   Google Scholar
• Souza, T.P., et al., 2019. Efeito da condição climática na temperatura de pavimento de concreto asfáltico espesso. In: C. S. Pitombo and C. M. de Oliveira, eds. 33o Congresso de Pesquisa e Ensino em Transporte da ANPET. Balneario Camboriu: Associação Nacional de Pesquisa e Ensino em Transportes, 1258–1268.
   Google Scholar
• Su, X., et al., 2022. A comparative study of polymer nanocomposites containing multi-walled carbon nanotubes and graphene nanoplatelets. Nano Materials Science, 4 (3), 185–204.
   Google Scholar
• Surekha, G., et al., 2020. FTIR, Raman and XRD analysis of graphene oxide films prepared by modified Hummers method. Journal of Physics: Conference Series, 1495 (1), 012012.
   Google Scholar
• Ţucureanu, V., Matei, A., and Avram, A.M., 2016. Ftir spectroscopy for carbon family study. Critical Reviews in Analytical Chemistry, 46 (6), 502–520.
   PubMed Web of Science ®Google Scholar
• Vamegh, M., et al., 2019. Performance evaluation of fatigue resistance of asphalt mixtures modified by SBR/PP polymer blends and SBS. Construction and Building Materials, 209, 202–214.
   Web of Science ®Google Scholar
• Wang, H., et al., 2020a. Accelerated healing in asphalt concrete via laboratory microwave heating. Journal of Testing and Evaluation, 48 (2), 20170621.
   Web of Science ®Google Scholar
• Wang, R., et al., 2020b. Investigation of the effect of aging on the thermodynamic parameters and the intrinsic healing capability of graphene oxide modified asphalt binders. Construction and Building Materials, 230, 116984.
   Web of Science ®Google Scholar
• Wang, R., et al., 2021. Experimental study on mechanism, aging, rheology and fatigue performance of carbon nanomaterial/SBS-modified asphalt binders. Construction and Building Materials, 268, 121189.
   Web of Science ®Google Scholar
• Wang, Y., et al., 2022. Dispersion, compatibility, and rheological properties of graphene-modified asphalt binders. Construction and Building Materials, 350, 128886.
   Web of Science ®Google Scholar
• Wang, Z., Dai, Q., and Guo, S., 2017. Laboratory performance evaluation of both flake graphite and exfoliated graphite nanoplatelet modified asphalt composites. Construction and Building Materials, 149, 515–524.
   Web of Science ®Google Scholar
• Wang, Y., Shi, Z., and Yin, J., 2011. Facile synthesis of soluble graphene via a green reduction of graphene oxide in tea solution and its biocomposites. ACS Applied Materials & Interfaces, 3 (4), 1127–1133.
   PubMed Web of Science ®Google Scholar
• Wu, H., et al., 2022. Mechanism of multilayer graphene nanoplatelets and its effects on the rheological properties and thermal stability of styrene–butadiene–styrene modified asphalt. Diamond and Related Materials, 130, 109434.
   Web of Science ®Google Scholar
• Yan, T., et al., 2020. Evaluation of graphite nanoplatelets influence on the lubrication properties of asphalt binders. Materials, 13 (3), 772.
   PubMed Web of Science ®Google Scholar
• Yang, Q., et al., 2019. Rheological and micro-structural characterization of bitumen modified with carbon nanomaterials. Construction and Building Materials, 201, 580–589.
   Web of Science ®Google Scholar
• Yang, Q., et al., 2021. Exploiting the synergetic effects of graphene and carbon nanotubes on the mechanical properties of bitumen composites. Carbon, 172, 402–413.
   Web of Science ®Google Scholar
• Yang, L., Zhou, D., and Kang, Y., 2020. Rheological properties of graphene modified asphalt binders. Nanomaterials, 10 (11), 2197.
   Web of Science ®Google Scholar
• Yao, H., et al., 2016. Rheological properties, low-temperature cracking resistance, and optical performance of exfoliated graphite nanoplatelets modified asphalt binder. Construction and Building Materials, 113, 988–996.
   Web of Science ®Google Scholar
• Yao, H., et al., 2023. Applicability of standard rheological evaluation methods for high content SBS polymer modified asphalts. Buildings, 13 (5), 1156.
   Web of Science ®Google Scholar
• Zalghout, A., et al., 2022. Laboratory and field evaluation of plant produced asphalt mixtures containing RAP in hot climate: a case study from Phoenix, Arizona. Construction and Building Materials, 351, 128322.
   Web of Science ®Google Scholar
• Zhang, H., et al., 2018. Effects of ZnO particle size on properties of asphalt and asphalt mixture. Construction and Building Materials, 159, 578–586.
   Web of Science ®Google Scholar
• Zhang, X., et al., 2019. Preparation and characteristics of ethylene Bis(Stearamide)-based graphene-modified asphalt. Materials, 12 (5), 757.
   PubMed Web of Science ®Google Scholar
• Zhang, L., et al., 2021. Preparation and performance of graphene nanoplatelets-modified epoxy asphalt. Journal of Performance of Constructed Facilities, 35 (6).
   Web of Science ®Google Scholar
• Zhao, X., et al., 2011. Enhanced mechanical properties of graphene-based Poly(vinyl alcohol). Macromolecules, 44 (7), 2392–2392.
   Web of Science ®Google Scholar
• Zhou, H.-Y., Dou, H.-B., and Chen, X.-H., 2021. Rheological properties of graphene/polyethylene composite modified asphalt binder. Materials, 14 (14), 3986.
   PubMed Web of Science ®Google Scholar
• Zhu, C., et al., 2010. Reducing sugar: new functional molecules for the green synthesis of graphene nanosheets. ACS Nano, 4 (4), 2429–2437.
   PubMed Web of Science ®Google Scholar