References
- World Health Organization, Global Status Report on Road safety 2018. 2018.
- Černiauskas E, Keršys A, Lukoševičius V, et al. Investigation of anti-intrusion beams in vehicle side doors. Mechanika. 2010;86:11–16.
- Sharma N. Comparison of Cross sectional Profiles for Side Impact Crash Structure in Passenger Vehicle. The Unıversıty of Texas at Arlıngton. 2018.
- Li MF, Chiang TS, Tseng JH, et al. Hot stamping of door impact beam. Procedia Eng. 2014;81:1786–1791.
- Yoon TH, Kim H, Heo C, et al. An experiment and FE simulation for the development of a SPFC1180 AHSS one-body door impact beam about a car side collision. Int J Precis Eng Manuf. 2016;17(1):81–89.
- Sookchanchai K, Hlaing SS, Uthaisangsuk V. A geometrical parametric study of side door reinforced beams under lateral impact load. Int J Crashworthiness. 2021;1–16.
- More KC, Patil GM, Belkhede AA. Design and analysis of side door intrusion beam for automotive safety. Thin-Walled Struct. 2020;153:106788.
- Estrada Q, Vergara-Vázquez J, Szwedowicz D, et al. Effect of end-clamping constraints on bending crashworthiness of square profiles. Int J Adv Manuf Technol. 2021;116(9-10):3115–3134.
- Long CR, Chung Kim Yuen S, Nurick GN. Analysis of a car door subjected to side pole impact. Lat Am J Solids Struct. 2019;16:1–17.
- Tang T, Zhang W, Yin H, et al. Crushing analysis of thin-walled beams with various section geometries under lateral impact. Thin-Walled Struct. 2016;102:43–57.
- Ghadianlou A, Abdullah SB. Crashworthiness design of vehicle side door beams under low-speed pole side impacts. Thin-Walled Struct. 2013;67:25–33.
- Ben G, Sugimoto N, Aoki Y. Development of simulation technology for impact behavior of CFRP/Al alloy hybrid beams in side collision of automobiles. Adv Compos Mater. 2010;19(4):363–379.
- Cheon SS, Lee DG, Jeong KS. Composite side-door impact beams for passenger cars. Compos Struct. 1997;38(1–4):229–239.
- Lim TS, Lee DG. Mechanically fastened composite side-door impact beams for passenger cars designed for shear-out failure modes. Compos Struct. 2002;56(2):211–221.
- Yang Y, Wu X, Hamada H. Application of fibre-reinforced composites beam as energy absorption member in vehicle. Int J Crashworthiness. 2013;18(2):103–109.
- Abdulqadir SF, Tarlochan F. Composite hat structure design for vehicle safety: potential application to B-Pillar and door ıntrusion beam. Materials (Basel). 2022;15(3):1084.
- Lee H, Huh M, Kang S, et al. Compressive behavior of automotive side impact beam with continuous glass fiber reinforced thermoplastics incorporating long fiber thermoplastics ribs. Fibers Polym. 2017;18(8):1609–1613.
- Wang W, Dai S, Lu G, et al. Hierarchical optimization of a novel vehicle door system under side impact based on integrated weighting method. Struct Multidisc Optim. 2021;63(6):2969–2988.
- Patil S, Bhosale A, Dhepe V, et al. Impact energy absorption capability of polygonal cross-section thin-walled beams under lateral impact. İJİRSS. 2021;4(4):205–214.
- Araldite 2015-1 Stuructural Adhesives Technical Data Sheet. Hunstman. [Online]. Available: https://www.intertronics.co.uk/wp-content/uploads/2015/12/ara2015.pdf. [Accessed 18 February 2022]. 2018.
- Benabou L. Kink band formation in wood species under compressive loading. Exp Mech. 2008;48(5):647–656.