A machine learning based optimisation method to evaluate the crushing behaviours of square tubes with rectangular-hole-type initiators

References

• Yin H, Xiao Y, Wen G, et al. Multiobjective optimization for foam-filled multi-cell thin-walled structures under lateral impact. Thin-Walled Struct. 2015;94:1–12.
   Web of Science ®Google Scholar
• Eren Yg I, Aksoy Z. Finite element analysis of collapse of front side rails with new types of crush initiators. Int J Autom Technol. 2009;10:451–457.
   Web of Science ®Google Scholar
• Arnold B. Experimental observations on the crush characteristics of AA6061 T4 and T6 structural square tubes with and without circular discontinuities. Int J Crashworthiness. 2004;9:73–87.
   Web of Science ®Google Scholar
• Jiang H, Ren Y, Gao B, et al. Design of novel plug-type triggers for composite square tubes: Enhancement of energy-absorption capacity and inducing failure mechanisms. Int J Mech Sci. 2017;131–132:113–136.
   Web of Science ®Google Scholar
• Yamaguchi S, K H, Okazaki T. Efficient energy absorption of automobile side rails. SAE 1985.
   Google Scholar
• Aa Singace E-SH. Behaviour of axially crushed corrugated tubes. Int J Mech Sci. 1997;39:249–268.
   Web of Science ®Google Scholar
• Siromani D, Henderson G, Mikita D, et al. An experimental study on the effect of failure trigger mechanisms on the energy absorption capability of CFRP tubes under axial compression. Compos A: Appl Sci Manufact. 2014;64:25–35.
   Web of Science ®Google Scholar
• DiPaolo BP, Monteiro PJM, Gronsky R. Quasi-static axial crush response of a thin-wall, stainless steel box component. Int J Solids Struct. 2004;41:3707–3733.
   Web of Science ®Google Scholar
• Sastranegara A, Adachi T, Yamaji A. Improvement of energy absorption of impacted column due to transverse impact. Int J Impact Eng. 2005;31:483–496.
   Web of Science ®Google Scholar
• Cheng Q, Altenhof W, Li L. Experimental investigations on the crush behaviour of AA6061-T6 aluminum square tubes with different types of through-hole discontinuities. Thin-Walled Struct. 2006;44:441–454.
   Web of Science ®Google Scholar
• Gümrük R, Karadeniz S. A numerical study of the influence of bump type triggers on the axial crushing of top hat thin-walled sections. Thin-Walled Struct. 2008;46:1094–1106.
   Web of Science ®Google Scholar
• Mamalis AG, Manolakos DE, Spentzas KN, et al. The effect of the implementation of circular holes as crush initiators to the crushing characteristics of mild steel square tubes: Experimental and numerical simulation. Int J Crashworthiness. 2009;14:489–501.
   Web of Science ®Google Scholar
• Cho Y-B, Bae C-H, Suh M-W, et al. A vehicle front frame crash design optimization using hole-type and dent-type crush initiator. Thin-Walled Struct. 2006;44:415–428.
   Web of Science ®Google Scholar
• Gupta NK, Gupta SK. Effect of annealing, size and cut-outs on axial collapse behaviour of circular tubes. Int J Mech Sci. 1993;35:597–613.
   Web of Science ®Google Scholar
• Tarlochan F, Samer F, Hamouda AMS, et al. Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces. Thin-Walled Struct. 2013;71:7–17.
   Web of Science ®Google Scholar
• Alavi Nia A, Fallah Nejad K, Badnava H, et al. Effects of buckling initiators on mechanical behavior of thin-walled square tubes subjected to oblique loading. Thin-Walled Struct. 2012;59:87–96.
   Web of Science ®Google Scholar
• Han H, Taheri F, Pegg N. Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout. Thin-Walled Struct. 2007;45:283–300.
   Web of Science ®Google Scholar
• Bodlani SB, Yuen SCK, Nurick GN. The energy absorption characteristics of square mild steel tubes with multiple induced circular hole discontinuities—Part II: Numerical simulations. Trans ASME J Appl Mech. 2009;76:728–731.
   Web of Science ®Google Scholar
• Zhu F, Logakannan K. Crash safety design for lithium-ion vehicle battery module with machine learning. SAE Technical Paper 2022-01-0863 DOI:10.4271/2022-01-0863.
   Google Scholar
• Kazi M-K, Eljack F, Mahdi E. Design of composite rectangular tubes for optimum crashworthiness performance via experimental and ANN techniques. Compos Struct. 2022;279. DOI:10.1016/j.compstruct.2021.114858
   Web of Science ®Google Scholar
• Kohar CP, Greve L, Eller TK, et al. A machine learning framework for accelerating the design process using CAE simulations: An application to finite element analysis in structural crashworthiness. Comput Methods Appl Mech Eng. 2021;385:114008.
   Web of Science ®Google Scholar
• Li Z, Ma W, Yao S, et al. A machine learning based optimization method towards removing undesired deformation of energy-absorbing structures. Struct Multidiscip Optim. 2021; 64:919–934.
   Web of Science ®Google Scholar
• Harrinton P. Machine learning in action. Manning Publications Co., 3 Lewis Street Greenwich, CT, USA. 2012.
   Google Scholar
• Flach PA. Machine learning—The art and science of algorithms that make sense of data, Cambridge University Press, New York, NY, United States. 2012.
   Google Scholar
• Li Z, Rakheja S, Shangguan W-B. Study on crushing behaviors of foam-filled thin-walled square tubes with different types and number of initiators under multiple angle loads. Thin-Walled Struct. 2019;145. DOI:10.1016/j.tws.2019.106376
   Web of Science ®Google Scholar
• Goodfellow L, Bengio Y, Courville A. Deep learning. Massachusetts: MIT Press, 2017.
   Google Scholar
• Tin Kam H. Random decision forests. Proceedings of 3rd International Conference on Document Analysis and Recognition. Vol. 1. 1995. p. 278–282.
   Google Scholar
• Wiener ALM. Classification and regression by RandomForest. R News. 2002;2/3:18–22.
   Google Scholar
• Langseth M, Hopperstad OS, Hanssen AG. Crash behaviour of thin-walled aluminium members. Thin-Walled Struct. 1998;32:127–150.
   Web of Science ®Google Scholar
• Reyes A, Hopperstad OS, Hanssen AG, et al. Modeling of material failure in foam-based components. Int J Impact Eng. 2004;30:805–834.
   Web of Science ®Google Scholar
• Liang R, Liu X, Hu Y, et al. A methodology to investigate and optimise the crashworthiness response of foam-filled twelve right angles thin-walled structures under axial impact. Compos Struct. 2023:116736. DOI:10.1016/j.compstruct.2023.116736
   Web of Science ®Google Scholar
• Yin H, Wen G, Liu Z, et al. Crashworthiness optimization design for foam-filled multi-cell thin-walled structures. Thin-Walled Struct. 2014;75:8–17.
   Web of Science ®Google Scholar
• Zhang Z, Liu S, Tang Z. Comparisons of honeycomb sandwich and foam-filled cylindrical columns under axial crushing loads. Thin-Walled Struct. 2011;49:1071–1079.
   Web of Science ®Google Scholar
• Li Z, Chen R, Lu F. Comparative analysis of crashworthiness of empty and foam filled thin-walled tubes. Thin-Wall Struct 2018;124:343–9
   Google Scholar
• Ragland CL, Fessahaie O, Elliott D. Evaluation of frontal offset/oblique crash test conditions. Proceedings of 17th International Technical Conference on the Enhanced Safety of Vehicles CD ROM, Amsterdam, Netherlands, 2001.
   Google Scholar
• Pirmohammad S, Marzdashti SE. Crushing behavior of new designed multi-cell members subjected to axial and oblique quasi-static loads. Thin-Walled Struct. 2016;108:291–304.
   Web of Science ®Google Scholar
• Zhang S, Xu F. A two-stage hybrid optimization for honeycomb-type cellular structures under out-of-plane dynamic impact. Appl Math Modell. 2020;80:755–770.
   Web of Science ®Google Scholar
• Hanssen AG, Langseth M, Hopperstad OS. Static crushing of square aluminium extrusions with aluminium foam filler. Int J Mech Sci. 1999;41:967–993.
   Web of Science ®Google Scholar
• Chatterjee P, Chakraborty S. Material selection using preferential ranking methods. Mater Des. 2012;35:384–393.
   Web of Science ®Google Scholar
• Chatterjee P, Athawale VM, Chakraborty S. Materials selection using complex proportional assessment and evaluation of mixed data methods. Mater Des. 2011;32:851–860.
   Web of Science ®Google Scholar
• Zavadskas EK, Turskis Z, Tamošaitiene J, et al. Multicriteria selection of project managers by applying grey criteria. Ukio Technologinis ir Ekonominis Vystymas. 2008;14:462–477.
   Web of Science ®Google Scholar
• Sun G, Liu T, Huang X, et al. Topological configuration analysis and design for foam filled multi-cell tubes. Eng Struct. 2018;155:235–250.
   Web of Science ®Google Scholar
• Liu X, Liang R, Hu Y, et al. Collaborative optimization of vehicle crashworthiness under frontal impacts based on displacement oriented structure. Int J Autom Technol. 2021;22:1319–1335.
   Web of Science ®Google Scholar
• Liao X, Li Q, Yang X, et al. Multiobjective optimization for crash safety design of vehicles using stepwise regression model. Struct Multidiscip Optim. 2007;35:561–569.
   Web of Science ®Google Scholar