Effects of trace amount modified SiC nanoparticles and processing parameters on microstructure and mechanical properties of ZA27 alloy

References

• Ma Y, Liu HJ, Hao Y, et al. Competitive growth of grains in ZA alloys during continuous casting with heated mould. Int J Cast Metals Res. 2005;18(1):55–58. doi: 10.1179/136404605225022838
   Web of Science ®Google Scholar
• Miroslav B, Mitrović S, Zivic F, et al. Wear behavior of composites based on ZA-27 alloy reinforced by Al2O3 particles under dry sliding condition. Tribol Lett. 2010;38(3):337–346. doi: 10.1007/s11249-010-9613-5
   Web of Science ®Google Scholar
• Prasad BK. Effect of microstructure on the sliding wear performance of a Zn–al–ni alloy. Wear. 2000;240(1–2):100–112. doi: 10.1016/S0043-1648(00)00369-0
   Web of Science ®Google Scholar
• Vencl A, Bobić B, Vučetić F, et al. Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy. J Braz Soc Mech Sci Eng. 2018;40(11):513. doi: 10.1007/s40430-018-1441-9
   Web of Science ®Google Scholar
• Çuvalcı H, Çelik HS. Investigation of the abrasive wear behaviour of ZA-27 alloy and CuSn10 bronze. J Mater Sci. 2011;46(14):4850–4857. doi: 10.1007/s10853-011-5396-9
   Web of Science ®Google Scholar
• Vencl A, Bobić I, Vučetić F, et al. Structural, mechanical and tribological characterization of Zn25Al alloys with Si and sr addition. Mater Design. 2014;64:381–392. doi: 10.1016/j.matdes.2014.07.056
   Web of Science ®Google Scholar
• El-Khair MT A, Lotfy A, Daoud A, et al. Microstructure, thermal behavior and mechanical properties of squeeze cast SiC, ZrO2 or C reinforced ZA27 composites. Mater Sci Eng A. 2011;528(6):2353–2362. doi: 10.1016/j.msea.2010.11.060
   Web of Science ®Google Scholar
• Prasad BK. Investigation into sliding wear performance of zinc-based alloy reinforced with SiC particles in dry and lubricated conditions. Wear. 2007;262(3–4):262–273. doi: 10.1016/j.wear.2006.05.004
   Web of Science ®Google Scholar
• Bharat N, Bose PSC. Influence of nano-TiO2 particles on the microstructure, mechanical and wear behaviour of AA7178 alloy matrix fabricated by stir casting technique. P I Mech Eng L-J Mater. 2023;237(4):753–766. doi: 10.1177/14644207221123520
   Google Scholar
• Bharat N, Bose PSC. Optimizing the wear behaviour of AA7178 metal matrix composites reinforced with SiC and TiO2 nanoparticles: a comparative study using evolutionary and statistical methods. Silicon. 2023;15(11):4703–4719. doi: 10.1007/s12633-023-02395-6
   Web of Science ®Google Scholar
• Bharat N, Bose PSC. Optimization of tribological behaviour of TiO2 nanoparticles reinforced AA7178 alloy matrix using ANN and Taguchi’s methodology. Surf Topogr Metrol Prop. 2022;10(2):025032. doi: 10.1088/2051-672X/ac7a55
   Web of Science ®Google Scholar
• Bharat N, Bose PSC. An overview on the effect of reinforcement and wear behaviour of metal matrix composites. Mater Today: Proceed. 2021;46:707–713. doi: 10.1016/j.matpr.2020.12.084
   Google Scholar
• Bharat N, Bose PSC. Wear performance analysis and optimization of process parameters of novel AA7178/nTiO2 using ANN-GRA method. P I Mech Eng E-J Process Mech Eng. 2023; (0). doi: 10.1177/09544089231156074
   Google Scholar
• Kolahchi R, Safari M, Esmailpour M. Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium. Compos Struct. 2016;150:255–265. doi: 10.1016/j.compstruct.2016.05.023
   Web of Science ®Google Scholar
• Kolahchi R, Zhu SP, Keshtegar B, et al. Dynamic buckling optimization of laminated aircraft conical shells with hybrid nanocomposite martial. Aerosp Sci Technol. 2020;98:105656. doi: 10.1016/j.ast.2019.105656
   Web of Science ®Google Scholar
• Keshtegar B, Farrokhian A, Kolahchi R, et al. Dynamic stability response of truncated nanocomposite conical shell with magnetostrictive face sheets utilizing higher order theory of sandwich panels. Eur J Mech A-Solid. 2020;82:104010. doi: 10.1016/j.euromechsol.2020.104010
   Web of Science ®Google Scholar
• Keshtegar B, Motezaker M, Kolahchi R, et al. Wave propagation and vibration responses in porous smart nanocomposite sandwich beam resting on Kerr foundation considering structural damping. Thin Wall Struct. 2020;154:106820. doi: 10.1016/j.tws.2020.106820
   Web of Science ®Google Scholar
• Golabchi H, Kolahchi R, Bidgoli MR. Vibration and instability analysis of pipes reinforced by SiO2 nanoparticles considering agglomeration effects. Comput Concrete. 2018;21:431–440. doi: 10.12989/cac.2018.21.4.431
   Web of Science ®Google Scholar
• Hajmohammad MH, Maleki M, Kolahchi R. Seismic response of underwater concrete pipes conveying fluid covered with nano-fiber reinforced polymer layer. Soil Dyn Earthq Eng. 2018;110:18–27. doi: 10.1016/j.soildyn.2018.04.002
   Web of Science ®Google Scholar
• Al-Furjan MSH, Farrokhian A, Keshtegar B, et al. Dynamic stability control of viscoelastic nanocomposite piezoelectric sandwich beams resting on Kerr foundation based on exponential piezoelasticity theory. Eur J Mech A-Solid. 2021;86:104169. doi: 10.1016/j.euromechsol.2020.104169
   Web of Science ®Google Scholar
• Al-Furjan MSH, Farrokhian A, Mahmoud SR, et al. Dynamic deflection and contact force histories of graphene platelets reinforced conical shell integrated with magnetostrictive layers subjected to low-velocity impact. Thin Wall Struct. 2021;163:107706. doi: 10.1016/j.tws.2021.107706
   Web of Science ®Google Scholar
• Hajmohammad MH, Nouri AH, Kolahchi R. A new numerical approach and visco-refined zigzag theory for blast analysis of auxetic honeycomb plates integrated by multiphase nanocomposite facesheets in hygrothermal environment. Eng Comput. 2019;35(4):1141–1157. doi: 10.1007/s00366-018-0655-x
   Web of Science ®Google Scholar
• Kolahchi R, Kolahdouzan F. A numerical method for magneto-hygro-thermal dynamic stability analysis of defective quadrilateral graphene sheets using higher order nonlocal strain gradient theory with different movable boundary conditions. Appl Math Model. 2021;91:458–475. doi: 10.1016/j.apm.2020.09.060
   Web of Science ®Google Scholar
• Hajmohammad MH, Azizkhani MB, Kolahchi R. Multiphase nanocomposite viscoelastic laminated conical shells subjected to magneto-hygrothermal loads: dynamic buckling analysis. Int J Mech Sci. 2018;137:205–213. doi: 10.1016/j.ijmecsci.2018.01.026
   Web of Science ®Google Scholar
• Motezaker M, Kolahchi R, Rajak DK, et al. Influences of fiber reinforced polymer layer on the dynamic deflection of concrete pipes containing nanoparticle subjected to earthquake load. Polym Compos. 2021;42(8):4073–4081. doi: 10.1002/pc.26118
   Web of Science ®Google Scholar
• Kolahchi R, Keshtegar B, Trung N-T. Trung NT.Optimization of dynamic properties for laminated multiphase nanocomposite sandwich conical shell in thermal and magnetic conditions. J Sandw Struct Mater. 2022;24(1):643–662. doi: 10.1177/10996362211020388
   Web of Science ®Google Scholar
• Hajmohammad MH, Farrokhian A, Kolahchi R. Dynamic analysis in beam element of wave-piercing catamarans undergoing slamming load based on mathematical modelling. Ocean Eng. 2021;234:109269. doi: 10.1016/j.oceaneng.2021.109269
   Web of Science ®Google Scholar
• Al-Furjan MSH, Hajmohammad MH, Shen X, et al. Evaluation of tensile strength and elastic modulus of 7075-T6 aluminum alloy by adding SiC reinforcing particles using vortex casting method. J Alloy Compd. 2021;886:161261. doi: 10.1016/j.jallcom.2021.161261
   Web of Science ®Google Scholar
• Al-Furjan MSH, Xu MX, Farrokhianc A, et al. On wave propagation in piezoelectric-auxetic honeycomb-2D-FGM micro-sandwich beams based on modified couple stress and refined zigzag theories. Wave Random Complex. 2022;(0):1–25. doi: 10.1080/17455030.2022.2030499
   Google Scholar
• Al-Furjan MSH, Yang Y, Farrokhian A, et al. Dynamic instability of nanocomposite piezoelectric-leptadenia pyrotechnica rheological elastomer-porous functionally graded materials micro viscoelastic beams at various strain gradient higher-order theories. Polym Compos. 2022;43(1):282–298. doi: 10.1002/pc.26373
   Web of Science ®Google Scholar
• Al-Furjan MSH, Yin C, Shen X, et al. Energy absorption and vibration of smart auxetic FG porous curved conical panels resting on the frictional viscoelastic torsional substrate. Mech Syst Signal Process. 2022;178:109269. doi: 10.1016/j.ymssp.2022.109269
   Web of Science ®Google Scholar
• Al-Furjan MSH, Shan L, Shen X, et al. Combination of FEM-DQM for nonlinear mechanics of porous GPL-reinforced sandwich nanoplates based on various theories. Thin Wall Struct. 2022;178:109495. doi: 10.1016/j.tws.2022.109495
   Web of Science ®Google Scholar
• Al-Furjan MSH, Shan L, Shen X, et al. A review on fabrication techniques and tensile properties of glass, carbon, and kevlar fiber reinforced rolymer composites. J Mater Res Technol. 2022;19:2930–2959. doi: 10.1016/j.jmrt.2022.06.008
   Google Scholar
• Chu C, Shan L, Al-Furjan MSH, et al. Experimental study for the effect of hole notched in fracture mechanics of GLARE and GFRP composites subjected to quasi-static loading. Theor Appl Fract Mec. 2022;122:103624. doi: 10.1016/j.tafmec.2022.103624
   Web of Science ®Google Scholar
• Al-Furjan MSH, Kolahchi R, Shan L, et al. Slamming impact induced hydrodynamic response in wave-piercing catamaran beam elements with controller. Ocean Eng. 2022;266:112908. doi: 10.1016/j.oceaneng.2022.112908
   Web of Science ®Google Scholar
• Chu C, Al-Furjan MSH, Kolahchi R, et al. A nonlinear Chebyshev-based collocation technique to frequency analysis of thermally pre/post-buckled third-order circular sandwich plates. Commun Nonlinear Sci. 2022;118:107056. doi: 10.1016/j.cnsns.2022.107056
   Web of Science ®Google Scholar
• Al-Furjan MSH, Qi ZH, Shan L, et al. Nano supercapacitors with practical application in aerospace technology: vibration and wave propagation analysis. Aerosp Sci Technol. 2023;133:108082. doi: 10.1016/j.ast.2022.108082
   Web of Science ®Google Scholar
• Wan PH, Al-Furjan MSH, Kolahchi R, et al. Application of DQHFEM for free and forced vibration, energy absorption, and post-buckling analysis of a hybrid nanocomposite viscoelastic rhombic plate assuming CNTs’ waviness and agglomeration. Mech Syst Signal Process. 2023;189:110064. doi: 10.1016/j.ymssp.2022.110064
   Web of Science ®Google Scholar
• Al-Furjan MSH, Fan S, Shan L, et al. Wave propagation analysis of micro air vehicle wings with honeycomb core covered by porous FGM and nanocomposite magnetostrictive layers. Wave Random Complex. 2023;(0):1–21. doi: 10.1080/17455030.2022.2164378
   Google Scholar
• Girish BM, Prakash KR, Satish BM, et al. An investigation into the effects of graphite particles on the damping behavior of ZA-27 alloy composite material. Mater Des. 2011;32(2):1050–1056. doi: 10.1016/j.matdes.2010.07.006
   Web of Science ®Google Scholar
• Chen TJ, Fu MF, Li YD, et al. Microstructural evolution during partial remelting of in situ Sip/ZA27 composite with developed dendrites. Int J Cast Metals Res. 2011;24(5):299–306. doi: 10.1179/1743133611Y.0000000003
   Web of Science ®Google Scholar
• Chen TJ, Li XW, Guo HY, et al. Effects of casting parameters on microstructure and dendrite morphology of ZA27 zinc based alloy. Int J Cast Metals Res. 2015;28(3):140–150. doi: 10.1179/1743133614Y.0000000132
   Web of Science ®Google Scholar
• Çelebi M, Çanakçi A, Özkaya S, et al. The effect of milling time on the mechanical properties of ZA27/Al2O3 nanocomposites. Universal J Mater Sci. 2018;6(5):163–169. doi: 10.13189/ujms.2018.060504
   Google Scholar
• Vencl A, Svoboda P, Klančnik S, et al. Influence of Al2O3 nanoparticles addition in ZA-27 alloy-based nanocomposites and soft computing prediction. Lubricants. 2023;11(1):24. doi: 10.3390/lubricants11010024
   Web of Science ®Google Scholar
• Vencl A, Šljivić V, Pokusová M, et al. Production, microstructure and tribological properties of Zn-Al/Ti metal-metal composites reinforced with alumina nanoparticles. Int J Metalcast. 2021;15(4):1402–1411. doi: 10.1007/s40962-020-00565-5
   Web of Science ®Google Scholar
• Fatile BO, Adewuyi BO, Owoyemi HT. Synthesis and characterization of ZA-27 alloy matrix composites reinforced with zinc oxide nanoparticles. Eng Sci Technol An Int J. 2017;20(3):1147–1154. doi: 10.1016/j.jestch.2017.01.001
   Google Scholar
• Vencl A, Kandeva M, Zadorozhnaya E, et al. Studies on structural, mechanical and erosive wear properties of ZA-27 alloy-based micro-nanocomposites. P I Mech Eng L- J Mater. 2021;235(7):1509–1518. doi: 10.1177/1464420721994870
   Google Scholar
• Vencl A, Stojanović B, Gojković R, et al. Enhancing of ZA-27 alloy wear characteristics by addition of small amount of SiC nanoparticles and its optimisation applying Taguchi method. Tribol Mater. 2022;1(3):96–105. doi: 10.46793/tribomat.2022.014
   Google Scholar
• Hayajneh MT, Almomani MA, Alelaumi SM. Synthesis and characterization of ZA-27/SiC nanocomposites and study of its anticorrosion performance in a 3.5% NaCl medium. Anti-Corros Method Mater. 2020;67(3):321–329. doi: 10.1108/ACMM-05-2019-2122
   Web of Science ®Google Scholar
• Bobić B, Vencl A, Ružić J, et al. Microstructural and basic mechanical characteristics of ZA27 alloy-based nanocomposites synthesized by mechanical milling and compocasting. J Compos Mater. 2020;53(15):2033–2046. doi: 10.1177/0021998318817876
   Web of Science ®Google Scholar
• Vencl A, Bobić I, Bobić B, et al. Erosive wear properties of ZA-27 alloy-based nanocomposites: influence of type, amount, and size of nanoparticle reinforcements. Friction. 2019;7(4):340–350. doi: 10.1007/s40544-018-0222-x
   Web of Science ®Google Scholar
• Yan ZM, Xie JW, Zou CL, et al. Effect of trace amount modified SiC nanoparticles on microstructures and mechanical properties of ZA27 alloy. Phys Status Solidi A. 2023;220(5):2200675. doi: 10.1002/pssa.202200675
   Web of Science ®Google Scholar