A study on mechanical and tribological properties of aluminium 6061-SiC-B₄C-GO hybrid nanocomposites with a novel optimized mix selection approach

References

• Ajay Kumar P, Rohatgi P, Weiss D. 50 years of foundry-produced metal matrix composites and future opportunities. Int J Metalcast. 2020;14(2):291–317. doi: 10.1007/s40962-019-00375-4
   Web of Science ®Google Scholar
• Hullur MK, Goudar DM, Venkateshwaralu K, et al. Sliding wear behaviour of in situ TiB2 reinforced hypoeutectic Al-Si alloy composites. Int J Metalcast. 2022;17(2):1–2. doi: 10.1007/s40962-022-00847-0
   Web of Science ®Google Scholar
• Jiao L, Wang B, Zhao Y, et al. Microstructure and mechanical properties of in situ AlB2/A356 composites under T6 treatment. Int J Metalcast. 2022;17(2):1–3. doi: 10.1007/s40962-022-00828-3
   Web of Science ®Google Scholar
• Kumar NS, Shashank TN, Dheeraj NU, et al. Coatings on reinforcements in aluminum metal matrix composites. Int J Metalcast. 2022;1–6.
   Web of Science ®Google Scholar
• Kumaresan G, Kumar BA. Investigations on mechanical and wear properties of al matrix composites reinforced with hybrid SiC and Al2O3 micro-particles. Int J Metalcast. 2022;17(2):1–8. doi: 10.1007/s40962-022-00817-6
   Web of Science ®Google Scholar
• Alipour M, Keshavamurthy R, Koppad PG, et al. Investigation of microstructure and mechanical properties of cast al–10Zn–3.5 mg–2.5 Cu nanocomposite reinforced with graphene nano sheets produced by ultrasonic assisted stir casting. Int J Metalcast. 2022;17(2):1–2. doi: 10.1007/s40962-022-00826-5
   Web of Science ®Google Scholar
• Gautam G, Kumar N, Mohan A, et al. A comparative assessment on microstructure, mechanical and tribological behaviour of light aluminium–trialuminide composites. Int J Metalcast. 2022;17(2):1–6. doi: 10.1007/s40962-022-00810-z
   Web of Science ®Google Scholar
• Abebe Emiru A, Sinha DK, Kumar A, et al. Fabrication and characterization of hybrid aluminium (Al6061) metal matrix composite reinforced with SiC, B4C and MoS2 via stir casting. Int J Metalcast. 2022;17(2):1–2. doi: 10.1007/s40962-022-00800-1
   Web of Science ®Google Scholar
• Gavisiddesha P, Thotappa C, Algur V, et al. Optimization of Wire cut electric Discharge machining characteristics of hybrid aluminium composites (Al6061/Gr/SiCp) using Taguchi Method. InSustainable Machining Strategies for Better Performance: Select Proceedings of SMSBP 2020. 2022; 49–60. Springer Singapore.
   Google Scholar
• Yadav AK, Kumar V, Mohan S. Microstructure and mechanical properties of an in situ al 356-Mg2Si-TiB2 hybrid composite prepared by stir and cooling slope casting. Int J Metalcast. 2022;17(2):1–3. doi: 10.1007/s40962-022-00804-x
   Web of Science ®Google Scholar
• Gnanavelbabu A, Surendran KS, Kumar S. Process optimization and studies on mechanical characteristics of AA2014/Al 2 O 3 nanocomposites fabricated through ultrasonication assisted stir–squeeze casting. Int J Metalcast. 2021;16(2):1–24. doi: 10.1007/s40962-021-00634-3
   Web of Science ®Google Scholar
• Chandrasekar P, Nagaraju D. The effect of electroless ni–p-coated Al2O3 on mechanical and tribological properties of scrap al alloy MMCs. Int J Metalcast. 2023;17(1):356–372. doi: 10.1007/s40962-022-00779-9
   Web of Science ®Google Scholar
• Ramadoss N, Pazhanivel K, Ganeshkumar A, et al. Microstructural, mechanical and corrosion behaviour of B4C/BN-reinforced Al7075 matrix hybrid composites. Int J Metalcast. 2023;17(1):499–514. doi: 10.1007/s40962-022-00791-z
   Web of Science ®Google Scholar
• Farajollahi R, Jamshidi Aval H, Jamaati R. Development and characterization of in-situ AA2024-Al3NiCu composites. Int J Metalcast. 2023;17(1):109–123. doi: 10.1007/s40962-021-00752-y
   Web of Science ®Google Scholar
• Khalkho JS, Chevuri SV, Dagarapu BK. Evaluation of microstructure and mechanical properties of TiO2 reinforced aluminium composites developed through multi-step stir casting. Int J Metalcast. 2023;17(1):272–283. doi: 10.1007/s40962-022-00760-6
   Web of Science ®Google Scholar
• Demirtaş H, Yildiz R, Çevik E. Mechanical and wear properties of high rate NiAl particle-reinforced al composites produced by pressure infiltration method. Int J Metalcast. 2021;15(4):1–8. doi: 10.1007/s40962-020-00564-6
   Web of Science ®Google Scholar
• Biswas P, Mishra S, Sahu M, et al. Simulation based optimization of Geometrical factors and process parameters for a continuous Caster to fabricate aluminum based MMC. Int J Metalcast. 2022;16(4):1758–1776. doi: 10.1007/s40962-021-00705-5
   Web of Science ®Google Scholar
• Manoj M, Jinu GR, Kumar JS, et al. Effect of TiB 2 particles on the morphological, mechanical and corrosion behaviour of Al7075 metal matrix composite produced using stir casting process. Int J Metalcast. 2021;16(3):1–6. doi: 10.1007/s40962-021-00696-3
   Web of Science ®Google Scholar
• Sivarupan T, Balasubramani N, Saxena P, et al. A review on the progress and challenges of binder jet 3D printing of sand moulds for advanced casting. Additive Manuf. 2021;40:101–889. doi: 10.1016/j.addma.2021.101889
   Web of Science ®Google Scholar
• Sathishkumar P, Deepakaravind V, Gopal P, et al. Analysis the mechanical properties and material characterization on magnesium metal matrix nano composites through stir casting process. Materials Today: Proceedings. 2021; 46: 7436–41.
   Google Scholar
• Kocaman M, Çuvalcı H, Çanakçı A. The effect of novel advanced method on the properties of novolac hybrid nanocomposites reinforced with carbon nanotube and glass fiber. J Appl Polym Sci. 2023;140(36):e54366. doi: 10.1002/app.54366
   Web of Science ®Google Scholar
• Sharma S, Singh J, Gupta MK, et al. Investigation on mechanical, tribological and microstructural properties of al–mg–si–T6/SiC/muscovite-hybrid metal-matrix composites for high strength applications. J Mater Res Technol. 2021;12:1564–1581. doi: 10.1016/j.jmrt.2021.03.095
   Google Scholar
• Sachin D, Uday KN, Rajamurugan G, et al. Effect of SiC reinforcement on the mechanical and tribological behaviour of Al6061 metal matrix composites. Materials Today: Proceedings. 2021; 46: 7082–9.
   Google Scholar
• Ikubanni PP, Oki M, Adeleke AA, et al. Tribological and physical properties of hybrid reinforced aluminium matrix composites. Materials Today: Proceedings. 2021; 46: 5909–13.
   Google Scholar
• Bhoi NK, Singh H, Pratap S, et al. Aluminum yttrium oxide metal matrix composite synthesized by microwave hybrid sintering: processing, microstructure and mechanical response. J Inorg Organomet Polym Mater. 2022;32(4):1–5. doi: 10.1007/s10904-021-02195-8
   Web of Science ®Google Scholar
• Bhoi NK, Singh H, Pratap S, et al. Zinc oxide nanorods effect in micro structural and mechanical characteristics of aluminium composite material. Mater Sci Eng B. 2022;278:115–641. doi: 10.1016/j.mseb.2022.115641
   Web of Science ®Google Scholar
• Dasari BL, Morshed M, Nouri JM, et al. Mechanical properties of graphene oxide reinforced aluminium matrix composites. Composites. 2018;145:136–144. doi: 10.1016/j.compositesb.2018.03.022
   Google Scholar
• Çelebi M, Çanakçı A, Güler O, et al. Investigation of microstructure, hardness and wear properties of hybrid nanocomposites with Al2024 matrix and low contents of B4C and h-BN nanoparticles produced by mechanical milling assisted hot pressing. JOM. 2022;74(11):4449–4461. doi: 10.1007/s11837-022-05441-7
   Web of Science ®Google Scholar
• Yalçın ED, Canakçı A, Cuvalcı H, et al. The effect of boron nitride (h-BN) and silicon carbide (SiC) on the microstructure and wear behavior of ZA40/SiC/h-BN hybrid composites processed by hot pressing. Kovove Mater. 2023;61(4):257–266. doi: 10.31577/km.2023.4.257
   Web of Science ®Google Scholar
• Stojanović B, Gajević S, Kostić N, et al. Optimization of parameters that affect wear of A356/Al2O3 nanocomposites using RSM, ANN, GA and PSO methods. Ind Lubr Tribol. 2022;74(3):350–359. doi: 10.1108/ILT-07-2021-0262
   Web of Science ®Google Scholar
• Sharma OP, Meena A Study of mechanical properties and wear behavior of aluminum 6061 matrix composites reinforced with hematite and titania. Materials Today: Proceedings. 2021; 44: 5028–36.
   Google Scholar
• Satishkumar P, Rakesh AI, Meenakshi R, et al. Characterization, mechanical and wear properties of Al6061/Sicp/fly ashp composites by stir casting technique. Materials Today: Proceedings. 2021; 37: 2687–94.
   Google Scholar
• Anand T, Dhanesh C, Ranganathan L Study of tribological properties of Al6061 hybrid nano composites. Materials Today: Proceedings. (2023).
   Google Scholar
• Madhukar P, Selvaraj N, Rao CS, et al. Fabrication and characterization two step stir casting with ultrasonic assisted novel AA7150-hBN nanocomposites. J Alloys Compd. 2020;815:152–464. doi: 10.1016/j.jallcom.2019.152464
   Web of Science ®Google Scholar
• Budapanahalli SH, Mallur SB, Patil AY, et al. A tribological study on the effect of reinforcing SiC and Al2O3 in Al7075: applications for spur gears. Metals. 2022;12(6):1028. doi: 10.3390/met12061028
   Web of Science ®Google Scholar
• Nallusamy S, Narayanan MR, Saravanan S. Investigation on structural steel and silicon carbide aluminum metal matrix composite spur gears using PTC Creo and ANSYS 16.0. In: InMaterials science forum. Vol. 937. Trans Tech Publications Ltd; 2018. pp. 33–41.
   Google Scholar
• Kumar A, Patnaik A, Bhat IK. Dry sliding wear behavior of Titanium metal powder filled aluminum alloy composites for gear application. Appl Mech Mater. 2018;877:118–136. doi: 10.4028/www.scientific.net/AMM.877.118
   Google Scholar
• Dwivedi SP, Sharma S, Li C, et al. Effect of nano-TiO2 particles addition on dissimilar AA2024 and AA2014 based composite developed by friction stir process technique. J Mater Res Technol. 2023;26:1872–1881. doi: 10.1016/j.jmrt.2023.07.234
   Google Scholar
• Kumar A, Maithani R, Kumar A, et al. An all-aluminium vehicle’s design and feasibility analysis. Materials Today: Proceedings. 2022; 64:1244–9.
   Google Scholar
• Strąk A, Małek M, Chlanda A, et al. The impact of temperature and mechanical load on corrosion resistance of anodized aluminum EN AW-6063 (T6 temper) alloy for potential architectonic application. J Buil Eng. 2022;50:104128. doi: 10.1016/j.jobe.2022.104128
   Web of Science ®Google Scholar
• Bedeković G, Trbović R. Electrostatic separation of aluminium from residue of electric cables recycling process. Waste Manage. 2020;108:21–27. doi: 10.1016/j.wasman.2020.04.033
   PubMed Web of Science ®Google Scholar
• Verma MK, Shakya S, Kumar P, et al. Trends in packaging material for food products: historical background, current scenario, and future prospects. J Food Sci Technol. 2021;58(11):1–4. doi: 10.1007/s13197-021-04964-2
   Web of Science ®Google Scholar
• Segaetsho MO, Msomi V, Moni V Corrosion behaviour of friction stir welded dissimilar joints produced from AA5083 and other alloys of aluminium: a critical review. Materials Today: Proceedings. 2022; 56:1696–701.
   Google Scholar
• Abbas F, Ali HM, Shaban M, et al. Towards convective heat transfer optimization in aluminum tube automotive radiators: potential assessment of novel Fe2O3-TiO2/water hybrid nanofluid. J Taiwan Inst Chem Eng. 2021;124:424–436. doi: 10.1016/j.jtice.2021.02.002
   Web of Science ®Google Scholar
• Umair M, Khan RM. Fibers for sports textiles. Fibers For Technical Textiles. 2020;93–115.
   Google Scholar
• Sehgal AK, Juneja C, Singh J, et al. Comparative analysis and review of materials properties used in aerospace industries: an overview. Materials Today: Proceedings. 2022; 48:1609–13.
   Google Scholar
• Timbs K, Khatamifar M, Antunes E, et al. Experimental study on the heat dissipation performance of straight and oblique fin heat sinks made of thermal conductive composite polymers. Therm Sci Eng Prog. 2021;22:100848. doi: 10.1016/j.tsep.2021.100848
   Google Scholar
• Walke S, Kale VM, Patil PP, et al. Effects of alloying element on the mechanical behavior of mg-MMCs: a review. Materials Today: Proceedings. 2023.
   Google Scholar
• Thevega T, Jayasinghe JA, Robert D, et al. Fire compliance of construction materials for building claddings: a critical review. Constr Build Mater. 2022;361:129582. doi: 10.1016/j.conbuildmat.2022.129582
   Web of Science ®Google Scholar
• Lu Y, Zhang T, Qiu S, et al. Carbon emissions reduction potentiality for railroad transportation based on life cycle assessment. High-Speed Railway. 2023;1(3):195–203. doi: 10.1016/j.hspr.2023.08.004
   Google Scholar
• Rawat MK, Kukreja N, Gupta SK Effect of reinforcing micro sized aluminium oxide particles on mechanical properties of polymer based composite. Materials Today: Proceedings. 2020; 26:1306–9.
   Google Scholar
• Trowell KA, Goroshin S, Frost DL, et al. Aluminum and its role as a recyclable, sustainable carrier of renewable energy. Appl Energy. 2020;275:115112. doi: 10.1016/j.apenergy.2020.115112
   Web of Science ®Google Scholar
• Pan X, Wong CW, Li C. Circular economy practices in the waste electrical and electronic equipment (WEEE) industry: a systematic review and future research agendas. J Clean Prod. 2022;365:132671. doi: 10.1016/j.jclepro.2022.132671
   Web of Science ®Google Scholar
• Sai GN Identification of Optimal Processing Parameters In Cnc Turning Of Aa6061 Using Taguchi Technique (Doctoral dissertation, Andhra University).
   Google Scholar
• Boccaccini AR, Karapappas P, Marijuan JM, et al. TiO 2 coatings on silicon carbide and carbon fibre substrates by electrophoretic deposition. J Mater Sci. 2004;39(3):851–859. doi: 10.1023/B:JMSC.0000012914.47793.3e
   Web of Science ®Google Scholar
• Khan MS, Ul Hassan CA, Shah MA, et al. Software cost and effort estimation using a new optimization algorithm inspired by strawberry plant. In2018 24th International Conference on Automation and Computing (ICAC). 2018; 1–6. IEEE.
   Google Scholar
• Siraj A, Chantsalnyam T, Tayara H, et al. Recsno: prediction of protein s-nitrosylation sites using a recurrent neural network. IEEE Access. 2021;9:6674–6682. doi: 10.1109/ACCESS.2021.3049142
   Web of Science ®Google Scholar
• Tavangar R, Moghadam HA, Khavandi A, et al. Comparison of dry sliding behavior and wear mechanism of low metallic and copper-free brake pads. Tribol Int. 2020;151:106416. doi: 10.1016/j.triboint.2020.106416
   Web of Science ®Google Scholar
• Sharif M, Amin J, Raza M, et al. An integrated design of particle swarm optimization (PSO) with fusion of features for detection of brain tumor. Pattern Recognit Lett. 2020;129:150–157. doi: 10.1016/j.patrec.2019.11.017
   Web of Science ®Google Scholar
• Mirjalili S. Studies in computational intelligence. Evolutionary Algorithms And Neural Networks Springer. 2019.
   Google Scholar
• Dong J, Wu L, Liu X, et al. Estimation of daily dew point temperature by using bat algorithm optimization based extreme learning machine. Appl Therm Eng. 2020;165:114–569. doi: 10.1016/j.applthermaleng.2019.114569
   Web of Science ®Google Scholar
• Rivera G, Coello CA, Cruz-Reyes L, et al. Preference incorporation into many-objective optimization: an ant colony algorithm based on interval outranking. Swarm Evol Comput. 2022;69:101–024. doi: 10.1016/j.swevo.2021.101024
   Web of Science ®Google Scholar
• Odili JB, Nasser AB, Noraziah A, et al. African buffalo optimization algorithm based t-way test suite generation strategy for electronic-payment transactions. InProceedings Of International Conference On Emerging Technologies And Intelligent Systems: ICETIS. 2021;1(2022):160–174. Springer International Publishing.
   Google Scholar