References
- Campbell J. Complete casting handbook: metal casting processes, metallurgy, techniques and design. 2nd ed. London: Butterworth-Heinemann; 2015.
- Campbell J. Entrainment defects. Mater Sci Technol. 2006;22(2):127–145. doi: 10.1179/174328406X74248
- Majidi SH, Beckermann C. Modelling of air entrainment during pouring of metal castings. Int J Cast Met Res. 2017;30(5):301–315. doi: 10.1080/13640461.2017.1307624
- Majidi SH, Beckermann C. Effect of pouring conditions and gating System design on air entrainment during mold filling. Inter Metalcast. 2018;13(2):255–272. doi: 10.1007/s40962-018-0272-x
- Majidi SH, Griffin J, Beckermann C. Simulation of air entrainment during mold filling: comparison with water modeling experiments. Metall Mat Trans B. 2018;49(5):2599–2610. doi: 10.1007/s11663-018-1334-4
- Guerra FV, Archer L, Hardin RA, et al. Measurement of air entrainment during pouring of an aluminum alloy. Metall Mat Trans B. 2020;52(1):123–137. doi: 10.1007/s11663-020-01998-3
- Guerra FV, Bedolla-Jacuinde A, Valdes-Vera H, et al. Measurement of air entrainment and its effect on the microstructure and mechanical properties of a A356 aluminum alloy. Int J Metalcast. 2022;17:2109–2127.
- Divandari M, Campbell J. Mechanisms of bubble trail formation in castings. Trans AFS. 2001;109:433–442.
- Divandari M, Campbell J. Bubble damage in a zn-al alloy pressure die casting. Trans Am Foundry Soc. 2003;111:2–9.
- Divandari M. Mechanism of bubble damage in castings, School of metallurgy and materials. Birmingham, UK: University of Birmingham; 1999.
- Erzi E, Tiryakioğlu M. A simple procedure to determine incoming quality of aluminum alloy ingots and its application to A356 alloy ingots. Int J Metalcast. 2020;14(4):999–1004. doi: 10.1007/s40962-020-00414-5
- Dispinar D, Campbell J, A comparison of methods used to assess aluminium melt quality, 136th TMS Annual Meeting, Shape Casting: 2nd International Symposium, Orlando, Florida, USA,(February 2007), 2007, pp. 11–18.
- Riestra M, Bjurenstedt A, Bogdanoff T, et al. Complexities in the assessment of melt quality. Int J Metalcast. 2018;12(3):441–448. doi: 10.1007/s40962-017-0179-y
- Fox S, Campbell J. Visualisation of oxide film defects during solidification of aluminium alloys. Scripta Materialia. 2000;43(10):881–886. doi: 10.1016/S1359-6462(00)00506-6
- Dispinar D, Campbell J. Use of bifilm index as an assessment of liquid metal quality. Int J Cast Met Res. 2006;19(1):5–17. doi: 10.1179/136404606225023300
- Tiryakioǧlu M, Campbell J, Staley JT. The influence of structural integrity on the tensile deformation of cast al–7wt.%Si–0.6wt.%Mg alloys. Scripta Materialia. 2003;49(9):873–878.
- Hwang JY, Doty HW, Kaufman MJ. The effects of mn additions on the microstructure and mechanical properties of al–si–cu casting alloys. Mater Sci Eng A. 2008;488(1–2):496–504. doi: 10.1016/j.msea.2007.12.026
- Bogdanoff T, Lattanzi L, Merlin M, et al. The complex interaction between microstructural features and crack evolution during cyclic testing in heat-treated al–Si–Mg–cu cast alloys. Mater Sci Eng A. 2021;825:141930. doi: 10.1016/j.msea.2021.141930
- Tiryakioğlu M, Staley JT, Campbell J. The effect of structural integrity on the tensile deformation characteristics of A206-T71 alloy castings. Mater Sci Eng A. 2008;487(1–2):383–387. doi: 10.1016/j.msea.2007.11.005
- Tiryakioglu M, Campbell J. Evaluation of structural integrity in cast al-7% Si-Mg alloys via toughness. In: TMS, editor.Mechanisms and mechanics of fracture: symposium in honor of prof. Warrandale, PA, USA: JF Knott; 2002. pp. 111–115.
- Tiryakioğlu M, Alexopoulos ND. The effect of artificial aging on tensile work hardening characteristics of a cast al-7 pct si-0.55 pct mg (A357) alloy. Metall Mater Trans A. 2008;39(11):2772–2780. doi: 10.1007/s11661-008-9611-5
- Courtney TH. Mechanical behavior of materials. Waveland: Press; 2005.
- Gyarmati G, Fegyverneki G, Tokár M, et al. The effects of rotary degassing treatments on the melt quality of an al–Si casting alloy. Int J Metalcast. 2021;15(1):141–151.
- Dybalska A, Eskin D, Patel JB. Evaluation of shearing time sufficient for effective liquid metal processing. JOM. 2017;69(4):720–724. doi: 10.1007/s11837-017-2286-x
- Tiryakioğlu M, Hudak D. On estimating Weibull modulus by the linear regression method. J Mater Sci. 2007;42(24):10173–10179. doi: 10.1007/s10853-007-2060-5
- Tiryakioğlu M, Hudak D. Guidelines for Two-Parameter Weibull analysis for flaw-containing materials. Metall Mat Trans B. 2011;42(6):1130–1135. doi: 10.1007/s11663-011-9556-8
- Tiryakioğlu M, Hudak D, Ökten G. On evaluating Weibull fits to mechanical testing data. Mater Sci Eng A. 2009;527(1–2):397–399. doi: 10.1016/j.msea.2009.08.014
- Yamamoto T, Kato W, Komarov SV, et al. Investigation on the surface vortex formation during mechanical stirring with an axial-flow impeller used in an aluminum process. Metall Mat Trans B. 2019;50(6):2547–2556. doi: 10.1007/s11663-019-01681-2
- Dispinar D, Akhtar S, Nordmark A, et al. Degassing, hydrogen and porosity phenomena in A356. Mater Sci Eng A. 2010;527(16–17):3719–3725. doi: 10.1016/j.msea.2010.01.088
- Gyarmati G, Vincze F, Fegyverneki G, et al. The effect of rotary degassing treatments with different purging gases on the double oxide- and nitride film content of liquid aluminum alloys. Metall Mat Trans B. 2022;53(2):1244–1257. doi: 10.1007/s11663-021-02414-0
- Mostafaei M, Ghobadi M, Eisaabadi B G, et al. Evaluation of the effects of rotary degassing process variables on the quality of A357 aluminum alloy castings. Metall Mat Trans B. 2016;47(6):3469–3475.
- Gyarmati G, Fegyverneki G, Mende T, et al. Characterization of the double oxide film content of liquid aluminum alloys by computed tomography. Mater Charact. 2019;157:109925. doi: 10.1016/j.matchar.2019.109925
- Tiryakioğlu M. The effect of hydrogen on pore formation in aluminum alloy castings: myth versus reality. Metals. 2020;10(3):368. doi: 10.3390/met10030368
- Tiryakioğlu M, Yousefian P, Eason PD. Quantification of entrainment damage in A356 aluminum alloy castings. Metall Mater Trans A. 2018;49(11):5815–5822. doi: 10.1007/s11661-018-4865-z
- Dispinar D, Campbell J. Metal quality studies in secondary remelting of aluminium. Foundry Trade J. 2004;178(3612):78–81.
- Uludağ M, Çetin R, Dispinar D, et al. Characterization of the effect of melt treatments on melt quality in al-7wt %Si-Mg alloys. Metals. 2017;7(5):157. doi: 10.3390/met7050157