Development of sacrificial anode from Al, Mg, and Ti from iron Ore tailings

References

• Dauce PD, de Castro GB, Lima MMF, et al. Characterization and magnetic concentration of an iron ore tailings. J Mater Res Technol. 2019;8(1):1052–1059. doi: 10.1016/j.jmrt.2018.07.015
   Google Scholar
• Adebimpe RA, Fatoye AO. Characterization of tailings from Itakpe iron ore mine, Itakpe, Nigeria. Sustain Geosci Geotour. 2021;4:1–8. doi: 10.18052/www.scipress.com/SGG.4.1
   Google Scholar
• Campos MRS, Blawert C, Scharnagl N, et al. Cathodic protection of mild steel using aluminum-based alloys. Materials. 2022;15(4):1301. doi: 10.3390/ma15041301
   PubMed Web of Science ®Google Scholar
• Panda L, Biswal SK, Venugopal R, et al. Recovery of ultrafine iron ore from iron ore tailings. Trans Indian Inst Met. 2018;71(2):463–468. doi: 10.1007/s12666-017-1177-8
   Web of Science ®Google Scholar
• Carmignano O, Vieira S, Teixeira A, et al. Iron ore tailings: characterization and applications. J Brazilian Chem Soc. 2021;32(10):1895–1911. doi: 10.21577/0103-5053.20210100
   Web of Science ®Google Scholar
• Alemayehu T, Birahane M. Corrosion and its protection- a review paper. Int J Acad Sci Res. 2014;2:1–7. doi: 10.29121/granthaalayah.v2.i2.2014.3067
   Google Scholar
• Roberge PR, Eng P. Corrosion engineering. Princ Pract. 2005;1.
   Google Scholar
• Bushman JB, Engineer PPC. Corrosion and cathodic protection theory. Medina: Bushman & Associates, Inc.; 2014.
   Google Scholar
• Veritas DN. Cathodic protection design. Recommended Practice DNV-RP-B401. 2010.
   Google Scholar
• Natesan M, Selvaraj S, Manickam T, et al. Corrosion behavior of metals and alloys in marine-industrial environment. Sci Technol Adv Mater. 2008;9(4):045002. doi: 10.1088/1468-6996/9/4/045002
   PubMed Web of Science ®Google Scholar
• Petrucci H, William S, Geoffrey H, et al. General chemistry: principles and Modern Applications. Ninth ed. Upper Saddle River, N.J: Pearson Education; 2007. p. 848.
   Google Scholar
• Barbucci A, Cerisola G, Bruzzone G, et al. Activation of aluminum anodes by the presence of intermetallic compounds. Electrochimica Acta. 1997;42(15):2369–2380. doi: 10.1016/S0013-4686(96)00420-3
   Web of Science ®Google Scholar
• Stansbury EE, Buchanan RA. Fundamentals of electrochemical corrosion. ASM International; 2000.
   Google Scholar
• Baxter D, Britton J. Offshore cathodic protection 101: what is it and how does it work? 2013.
   Google Scholar
• Choi YY, Kim SB, Suh CY, et al. Korea Institute of Geoscience and mineral resources (KIGAM). Manufacturing method of ferromolybdenum from molybdenite. U.S. Patent 8,268,034, 2012.
   Google Scholar
• Abedin S, Saleh A. Characterization of some aluminum alloys for application as anodes in alkaline batteries. J Appl Electrochem. 2004;34(3):331–335. doi: 10.1023/b:jach.0000015611.65219.64
   Web of Science ®Google Scholar
• Curioni M, Scenini F. The mechanism of hydrogen evolution during anodic polarization of aluminum. Electrochimica Acta. 2015;180:712–721. doi: 10.1016/j.electacta.2015.08.076
   Web of Science ®Google Scholar
• Laurent C, Scenini F, Monetta T, et al. The contribution of hydrogen evolution processes during corrosion of aluminum and aluminum alloys investigated by potentiodynamic polarization coupled with real-time hydrogen measurement. npj Mater Degrad. 2017;1:6. doi: 10.1038/s41529-017-0011-4
   Google Scholar
• Tian Z, Zhao Z, Dai C, et al. Experimental study on the properties of concrete mixed with iron ore tailings. Adv Mater Sci Eng. 2016;2016:1–9. doi: 10.1155/2016/8606505
   Web of Science ®Google Scholar
• Kuranchie F, Shukla S, Habibi D, et al. Utilization of iron ore tailings as aggregates in concrete. Cogent Eng. 2015;2(1):1083137. doi: 10.1080/23311916.2015.1083137
   Google Scholar
• Jiang P, Chen Y, Song X, et al. Study on compressive properties and dynamic characteristics of polypropylene-fiber-and-cement-modified iron-ore tailing under traffic load. Polymers. 2022;14(10):1995. doi: 10.3390/polym14101995
   PubMed Web of Science ®Google Scholar
• Su Z, Tang Q, Zhao W, et al. Preparation of iron ore tailings-based superhydrophobic coatings. Materials. 2022;15(12):4235. doi: 10.3390/ma15124235
   PubMed Web of Science ®Google Scholar
• Liu Q, Tang Q, Zhao W, et al. Ultrafine grinded and silane grafted iron ore tailings as reinforcing filler of styrene butadiene rubber. Materials. 2022;15(5):1756. doi: 10.3390/ma15051756
   PubMed Web of Science ®Google Scholar
• Semenenko E, Medvedieva O, Biliaiev M, et al. Numerical analysis of aerodynamic regime near tailings storage facility. IOP Conf Series Earth Environ Sci. 2023;1156(1):012006. doi: 10.1088/1755-1315/1156/1/012006
   Google Scholar
• Mori R. A novel aluminum–air secondary battery with long-term stability. RSC Adv. 2014;4(4):1982–1987. doi: 10.1039/c3ra44659j
   Web of Science ®Google Scholar
• Tang C, Li K, Wen N, et al. Recovering iron from iron ore tailings and preparing concrete composite admixtures. Minerals. 2019;9(4):232. doi: 10.3390/min9040232
   Web of Science ®Google Scholar
• Zhu Z, Li B, Zhou M. The influences of iron ore tailings as fine aggregate on the strength of ultrahigh performance concrete. Adv Mater Sci Eng. 2015;2015:1–6. doi: 10.1155/2015/412878
   Web of Science ®Google Scholar
• Kim JG, Joo JH, Koo SJ. Development of high-driving potential and high-efficiency Mg-based sacrificial anodes for cathodic protection. J Mat Sci Lett. 2000;19(6):477–479. doi: 10.1023/A:1006789217304
   Google Scholar
• Sina H, Emamy M, Saremi M, et al. The influence of Ti and Zr on electrochemical properties of aluminum sacrificial anodes. Mater Sci Eng A. 2006;431(1–2):263–276. doi: 10.1016/j.msea.2006.06.011
   Web of Science ®Google Scholar
• Salinas DR, Garcia SG, Bessone JB. Influence of alloying elements and microstructure on aluminum sacrificial anode performance: Case of Al–Zn. J Appl Electrochem. 1999;29(9):1063–1071. doi: 10.1023/A:1003684219989
   Web of Science ®Google Scholar
• Kim JG, Joo JH, Koo SJ. Development of high-driving potential and high-efficiency Mg-based sacrificial anodes for cathodic protection. Journal Of Materials Science Lett. 2000;19(6):477–479. doi: 10.1023/A:1006789217304
   Google Scholar
• Popov BN. Corrosion engineering: principles and solved problems. 1st ed. Elsevier; 2015. doi: 10.1016/C2012-0-03070-0.
   Google Scholar
• Song G, Atrens A. Understanding magnesium corrosion mechanism: a framework for improved alloy performance. Adv Eng Mater. 2004;5:837–858. doi: 10.1002/adem.200310405
   Web of Science ®Google Scholar
• Rodríguez R. Corrosion and cathodic protection problems. Int Conf Ocean Ener. 2010. Available from: https://www.ocean-energy-systems.org/publications/icoe/icoe-2010/document/corrosion-and-cathodic-protection-problems/
   Google Scholar
• Darezereshki E, Darban AK, Abdollahy M, et al. The leachability study of iron-oxides from mine tailings in a hybrid of sulfate-chloride lixiviant. J Environ Chem Eng. 2018;6(4):5167–5176. doi: 10.1016/j.jece.2018.07.040
   Web of Science ®Google Scholar
• Jeon S, Bright S, Park I, et al. A simple and efficient recovery technique for gold ions from ammonium thiosulfate medium by galvanic interactions of zero-valent aluminum and activated carbon: a parametric and mechanistic study of cementation. Hydrometallurgy. 2022;208:105815. doi: 10.1016/j.hydromet.2021.105815
   Web of Science ®Google Scholar
• Saffarzadeh A, Arumugam N, Shimaoka T. Aluminum and aluminum alloys in municipal solid waste incineration (MSWI) bottom ash: a potential source for the production of hydrogen gas. Int J Hydrog Ener. 2016;41(2):820–831. doi: 10.1016/j.ijhydene.2015.11.059
   Web of Science ®Google Scholar
• Bertolini R, Simonetto E, Pezzato L, et al. Mechanical and corrosion resistance properties of AA7075-t6 subzero formed sheets. Int J Adv Manuf Technol. 2021;115(9–10):2801–2824. doi: 10.1007/s00170-021-07333-7
   Web of Science ®Google Scholar
• Sharma M, Tomedi J, Parks J. A microscopic study on the corrosion fatigue of ultrafine grained and conventional al–mg alloy. Corros Sci. 2015;3:180–190. doi: 10.1016/j.corsci.2015.01.020
   Google Scholar
• Capelossi V, Poelman M, Recloux I, et al. Corrosion protection of clad 2024 aluminum alloy anodized in tartaric-sulfuric acid bath and protected with hybrid sol–gel coating. Electrochimica Acta. 2014;124:69–79. doi: 10.1016/j.electacta.2013.09.004
   Web of Science ®Google Scholar
• Zander D, Schnatterer C, Altenbach C, et al. Microstructural impact on intergranular corrosion and the mechanical properties of industrial drawn 6056 aluminum wires. Mater Des. 2015;83:49–59. doi: 10.1016/j.matdes.2015.05.079
   Web of Science ®Google Scholar
• Gao J, Gao S, Wang E, et al. Revealing the effect of aluminum content on the electrochemical performance of magnesium anodes for aqueous batteries. Mater Corros. 2020;71(11):1812–1823. doi: 10.1002/maco.202011692
   Web of Science ®Google Scholar
• Yasakau K, Zheludkevich M, Lamaka S, et al. Role of intermetallic phases in localized corrosion of AA5083. Electrochimica Acta. 2007;52(27):7651–7659. doi: 10.1016/j.electacta.2006.12.072
   Web of Science ®Google Scholar
• Birbilis N, Buchheit R. Investigation and discussion of characteristics for intermetallic phases common to aluminum alloys as a function of solution pH. J Electrochem Soc. 2008;55(3):C117. doi: 10.1149/1.2829897
   Google Scholar