A hydraulic hybrid excavator based on multi-chamber cylinders and secondary control – design and experimental validation

References

• Achten, P.A.J. , 2008. A serial hydraulic hybrid drive train for off-road vehicles. Proceedings of the National Conference on Fluid Power , 19 (2), 515–521.
   Google Scholar
• Achten, P.A.J. and Palmberg, J.-O. , 1999. What a difference a hole makes – the commercial value of the INNAS hydraulic transformer. In: The 6th Scandinavian international conference on fluid power, SICFP’99 , 26–28 May. Tampere, Finland.
   Google Scholar
• Andersson, S. , Söderberg, A. , and Björklund, S. , 2007. Friction models for sliding dry, boundary and mixed lubricated contacts So. Tribology International , 40, 580–587. doi:10.1016/j.triboint.2005.11.014.
   Web of Science ®Google Scholar
• Belan, H.C. , et al. , 2015. Digital secondary control architecture for aircraft application. In: The seventh workshop on digital fluid power . Austria: Linz, 21–39.
   Google Scholar
• Bishop, E.D. , 2007. Digital hydraulic system . US20070120662A1. US.
   Google Scholar
• Bishop, E.D. , 2009. Digital hydraulic transformer – approaching theoretical perfection in hydraulic drive efficiency. In: The 11th Scandinavian international conference on fluid power, SICFP’09 . Linköping, USA.
   Google Scholar
• Busquets, E. and Ivantysynova, M. , 2015. Adaptive robust motion control of an excavator hydraulic hybrid swing drive. SAE International Journal of Commercial Vehicles , 8 (2), 2015-01–2853. doi:10.4271/2015-01-2853.
   Web of Science ®Google Scholar
• Dell’ Amico, A. et al. , 2013. Investigation of a digital hydraulic actuation system on an excavator arm. In: The 13th Scandinavian international conference on fluid power, SICFP2013 . Linköping, Sweden, 505–511. doi:10.3384/ecp1392a50.
   Google Scholar
• Filla, R. , 2015. Evaluating the efficiency of wheel loader bucket designs and bucket filling strategies with non-coupled DEM simulations and simple performance indicators. Schriftenreihe der Forschungsvereinigung Bau- und Baustoffmaschinen e.V. FVB , 49, 273–292. doi:10.13140/RG.2.1.1507.1201.
   Google Scholar
• Frank, B. , Skogh, L. , and Alaküla, M. , 2012. On wheel loader fuel efficiency difference due to operator behaviour distribution. In: 2nd commercial vehicle technology symposium (CVT 2012) . Available from: http://www.iea.lth.se/publications/Papers/Frank_2012.pdf.
   Google Scholar
• Hansen, A.H. , 2014. Investigation and optimisation of a discrete fluid power PTO-system for wave energy converters . Aalborg, Denmark: Aalborg University, Institute of Energy Technology.
   Google Scholar
• Hansen, R.H. , Andersen, T.O. , and Perdersen, H.C. , 2011. ‘Analysis of discrete pressure level systems for wave energy converters. In: Proceedings of 2011 international conference on fluid power and mechatronics . 552–558. doi:10.1109/FPM.2011.6045825.
   Google Scholar
• Heemskerk, E. , Bonefeld, R. , and Buschmann, H. , 2015. Control of a semi-binary hydraulic four-chamber cylinder. In: Proceeding of the 14th Scandinavian international conference on fluid power . Tampere, Finland.
   Google Scholar
• Heybroek, K. and Norlin, E. , 2015. Hydraulic multi-chamber cylinders in construction machinery. In: Hydraulikdagarna . Linköping, Sweden.
   Google Scholar
• Heybroek, K. , Vael, G.E.M. , and Palmberg, J.-O. , 2012. Towards resistance-free hydraulics in construction machinery. In: 8th international fluid power conference . Dresden, Germany.
   Google Scholar
• Huova, M. , Laamanen, A. , and Linjama, M. , 2010. Energy efficiency of three-chamber cylinder with digital valve system. International Journal of Fluid Power , 11 (3), 15–22. doi:10.1080/14399776.2010.10781011.
   Google Scholar
• Inderelst, M. et al. , 2011. Energy efficient system layout for work hydraulics of excavators. In: The 12th Scandinavian international conference on fluid power, SICFP’11 . Tampere, Finland.
   Google Scholar
• Linjama, M. , et al. , 2009. Secondary controlled multi-chamber hydraulic cylinder. In: Proceedings of the 11th Scandinavian international conference on fluid power, SICFP’09 . Sweden.
   Google Scholar
• Palmgren, G. and Palmberg, J.-O. , 1988. Secondary controlled hydraulic systems – A new drive concept with future prospects. In: International fluid power exposition, IFPE’88 . Chicago, IL .
   Google Scholar
• Pettersson, K. and Tikkanen, S. , 2009. Secondary control in construction machinery – design and evaluation of an excavator swing drive. In: The 11th Scandinavian international conference on fluid power, SICFP’09 . Linköping.
   Google Scholar
• Sahlman, M. , 2012. Valve controlled multi-chamber cylinder . Tampere: Tampere University of Technology.
   Google Scholar
• Shih, M.-C. , 1984. Untersuchung einer zylinderansteuerung durch hydro-transformator am Konstant Drucknetz . Aachen University.
   Google Scholar
• Wiktor, R. and Heybroek, K. , 2014. Pressurized medium assembly . US20150298730A1. Sweden.
   Google Scholar