References
- Akers, A., Gassman, M., and Smith, R., 2006. Hydraulic power system analysis. USA: CRC Press.
- Blackburn, J.F., Reethof, G., and Shearer, J.L., 1960. Fluid power control. USA: Technology press of M.I.T. and John Wiley & Sons.
- Costa, G.K. and Sepehri, N., 2015. Hydrostatic transmissions and actuators – operation, modelling and applications. UK: John Wiley & Sons.
- Doddannavar, A. and Barnard, A., 2005. Practical hydraulic systems: operation and troubleshooting for engineers and technicians. Elsevier, US.
- Dorey, R.E., 1988. Modelling of losses in pumps and motors. First Bath International fluid power workshop, September. UK: University of Bath, 71–97.
- Esposito, A., 1980. Fluid power with applications. 4th ed. USA: Prentice Hall.
- Fitzgibbon, A.W., Pilu, M., and Fisher, R.B., 1996. Direct least squares fitting of ellipses. IEEE transactions on pattern analysis and machine intelligence, 21 (5), 476–480. doi:10.1109/34.765658
- Halir, R. and Flusser, J., 1998. Numerically stable direct least squares fitting of ellipses. Proceedings of the 6th International conference in Central Europe on computer graphics and visualization, Pizen, Czech Republic: WSCG, pp 125–132.
- Hall, S.J. and Steward, B.L., 2014. Comparison of steady state flow loss models for axial piston pumps. In: International Fluid Power Exposition (IFPE), Paper 4.1, Las Vegas, US.
- Ivantysyn, J. and Ivantysynova, M., 2000. Hydrostatic pumps and motors, principals, designs, performance, modeling, analysis, control and testing. New Delhi: Academia Books International.
- Jeong, H., 2007. A novel performance model given by the physical dimensions of hydraulic axial piston motors: model derivation. Journal of Mechanical Science and Technology, 21 (1), 83–97. doi:10.1007/BF03161714
- Jung, D.S., Kim, H.E., Jeong, H.S., Kang, B.S, Lee, Y.B., Kim, J.K., Kang, E.S., 2005. Experimental study on the performance estimation efficiency model of a hydraulic axial piston motors. Proceedings of the 6th JFPS International symposium on fluid power, TSUKUBB, 284–290. 2A3–1, Japan Fluid Power System Society - JFPS.
- Kluger, M.A., Fussner, D.R., and Roethler, B., 1996. A performance comparison of various automatic transmission pumping systems. SAE International congress & exposition, Detroit, US, 33–40. doi:10.1016/S0940-2993(96)80089-3
- KohmäScher, T., et al., 2007. Improved loss modeling of hydrostatic units: requirement for precise simulation of mobile working machine drivelines. In: ASME 2007 International mechanical engineering congress and exposition volume 4: design, analysis, control and diagnosis of fluid power systems, ASME, Seattle, WA.
- Manring, N.D., 2005a. Hydraulic control systems. US: John Wiley & Sons.
- Manring, N.D., 2005b. Measuring pump efficiency: uncertainty considerations. Journal Energy Resources Technological, 127 (4), 280–284. doi:10.1115/1.1926311
- Manring, N.D., 2016. Mapping the efficiency for a hydrostatic transmission. Journal of Dynamic Systems, Measurement, and Control, 138, 0310041–0310048. doi:10.1115/1.4032289
- McCandlish, D. and Dorey, R.E., 1984. The mathematical modeling of hydrostatic pumps and motors. Proceedings of the Institution of Mechanical Engineers, 198B (10), 165–174. doi:10.1243/PIME_PROC_1984_198_062_02
- Merritt, H.E., 1967. Hydraulic control systems. US: John Wiley & Sons.
- Sauer-Danfoss, 2010. Series 40 axial piston pumps technical information. US. October. 520L0635 Rev EJ - Sauer-Danfoss, US.
- Stringer, J., 1976. Hydraulic system analysis: an introduction. US: John Wiley & Sons.
- Szpak, Z.L., Chojnacki, W., and Van Den Hengel, A., 2012. Guaranteed ellipse fitting with the Sampson distance. Proceedings of the 12th European conference on computer vision, Part V, 7–13 October. Florence, Italy.
- Tessmann, R.K., 1979. A leakage path model for a hydraulic pump. The B.F.P.R Journal, 12 (1), 5–9.
- Watton, J., 2009. Fundamentals of fluid power control. Cambridge University Press, UK.
- Wilson, W.E., 1946. Rotary-pump theory. ASME Transactions, 68, 371–384.
- Wilson, W.E., 1949. Performance criteria for positive-displacement pumps and fluid motors. ASME Transactions, 71 (2), 115–120.
- Zarotti, G.L. and Nervegna, N., 1981. Pump efficiencies approximation and modelling. 6th International fluid power symposium, Paper C4, Cambridge, UK. 145–164.