Comparative performance of jet and spray impingement cooling in steel strip run-out table: experimental results

References

• Aamir, M, L Qiang, Z Xun, W Hong, and M. Zubair. 2014. “Ultra Fast Spray Cooling and Critical Droplet Diameter Estimation from Cooling Rate.” Journal of Power and Energy Engineering 02: 259–270. doi:10.4236/jpee.2014.24037.
   Google Scholar
• Afzal, Asif, Imran Mokashi, Sher Afghan Khan, Nur Azam Abdullah, and Azami Muhammad Hanafi Bin. 2021. “Optimization and Analysis of Maximum Temperature in a Battery Pack Affected by Low to High Prandtl Number Coolants Using Response Surface Methodology and Particle Swarm Optimization Algorithm.” Numerical Heat Transfer, Part A: Applications 79 (5): 406–435. doi:10.1080/10407782.2020.1845560.
   Web of Science ®Google Scholar
• Afzal, Asif, C. Ahamed Saleel, Irfan Anjum Badruddin, T.M. Yunus Khan, Sarfaraz Kamangar, Zulquernain Mallick, Olusegun David Samuel, and Manzoore Elahi. M Soudagar. 2020. “Human Thermal Comfort in Passenger Vehicles Using an Organic Phase Change Material– An Experimental Investigation, Neural Network Modelling, and Optimization.” Building and Environment 180: 107012. doi:10.1016/j.buildenv.2020.107012.
   Web of Science ®Google Scholar
• Amon, C. H., J. Murthy, S. C. Yao, S. Narumanchi, C. F. Wu, and CC. Hsieh. 2001. “MEMS-enabled Thermal Management of High-heat-flux Devices EDIFICE: Embedded Droplet Impingement for Integrated Cooling of Electronics.” Experimental Thermal and Fluid Science 25: 231–242. doi:10.1016/S0894-1777(01)00071-1.
   Web of Science ®Google Scholar
• Bement, TR. 1989. “Taguchi Techniques for Quality Engineering.” Technometrics 31: 253–255. doi:10.1080/00401706.1989.10488519.
   Google Scholar
• Bergman, T. L., F. P. Incropera, D. P. DeWitt, and AS Lavine. 2011. “Fundamentals of Heat and Mass Transfer.”
   Google Scholar
• Bhattacharya, P, AN Samanta, and S. Chakraborty. 2009. “Spray Evaporative Cooling to Achieve Ultra Fast Cooling in Runout Table.” International Journal of Thermal Sciences 48 (9): 1741–1747. doi:10.1016/j.ijthermalsci.2009.01.015.
   Web of Science ®Google Scholar
• Chandrashekar, A., B. V. Chaluvaraju, Asif Afzal, Denis A. Vinnik, Abdul Razak Kaladgi, Sagr Alamri, C. Ahamed Saleel, and Vineet Tirth. 2021. “Mechanical and Corrosion Studies of Friction Stir Welded Nano Al2O3 Reinforced Al-Mg Matrix Composites: RSM-ANN Modelling Approach.” Symmetry 13: 537. doi:10.3390/sym13040537.
   Google Scholar
• Choi, KJ, and SC. Yao. 1987. “Mechanisms of Film Boiling Heat Transfer of Normally Impacting Spray.” International Journal of Heat and Mass Transfer 30: 311–318. doi:10.1016/0017-9310(87)90119-0.
   Web of Science ®Google Scholar
• Fénot, M, J-J Vullierme, and E. Dorignac. 2005. “A Heat Transfer Measurement of Jet Impingement with High Injection Temperature.” Comptes Rendus Mécanique 333: 778–782. doi:10.1016/j.crme.2005.08.002.
   Web of Science ®Google Scholar
• Hardin, RA, K Liu, C Beckermann, and A. Kapoor. 2003. “A Transient Simulation and Dynamic Spray Cooling Control Model for Continuous Steel Casting.” Metallurgical and Materials Transactions B 34: 297–306. doi:10.1007/s11663-003-0075-0.
   Web of Science ®Google Scholar
• Hosain, ML, RB Fdhila, and A. Daneryd. 2014. “Multi-jet Impingement Cooling of a Hot Flat Steel Plate.” Energy Procedia 61: 1835–1839. doi:10.1016/j.egypro.2014.12.224.
   Google Scholar
• J-x, Li, Li Y-z, B-Y Cai, and Li E-h. 2019. “Experimental Investigation on Heat Transfer Mechanism of Air-Blast-Spray-Cooling System with a Two-Phase Ejector Loop for Aeronautical Application.” Energies 12: 3963. doi:10.3390/en12203963.
   Google Scholar
• Jha, JM, S V. Ravikumar, I Sarkar, SK Pal, and S. Chakraborty. 2016. “Jet Impingement Cooling of a Hot Moving Steel Plate: An Experimental Study.” Experimental Heat Transfer 29 (5): 615–631. doi:10.1080/08916152.2015.1046019.
   Web of Science ®Google Scholar
• Kareemullah, Mohammed, K. Fazlur Rehman Asif Afzal, K C Vishwanath, Hurmathulla Khan, M. Soudagar Manzoore Elahi, and Abdul Razak Kaladgi. 2021. “Preparation and Physicochemical Properties Evaluation of Epoxidized Neem Oil-based Bio- Lubricant.” Australian Journal of Mechanical Engineering. doi:10.1080/14484846.2021.1920141.
   Web of Science ®Google Scholar
• Karwa, N, SR Kale, and PMV. Subbarao. 2007. “Experimental Study of Non-boiling Heat Transfer from a Horizontal Surface by Water Sprays.” Experimental Thermal and Fluid Science 32: 571–579. doi:10.1016/j.expthermflusci.2007.06.007.
   Web of Science ®Google Scholar
• Kim, J. 2007. “Spray Cooling Heat Transfer: The State of the Art.” International Journal of Heat and Fluid Flow 28: 753–767. doi:10.1016/j.ijheatfluidflow.2006.09.003.
   Web of Science ®Google Scholar
• Liu, R, L Zhang, and X. Zhang. 2019. “Applications of Spray Cooling Technology in Aerospace Field.” IOP Conference Series: Materials Science and Engineering 470: 012020. doi:10.1088/1757-899X/470/1/012020.
   Google Scholar
• Lucas, A, P Simon, G Bourdon, J-C Herman, P Riche, J Neutjens, Harlet, P. 2004. “Metallurgical Aspects of Ultra Fast Cooling in Front of the Down-Coiler.” Steel Research International 75: 139–146. doi:10.1002/srin.200405939.
   Web of Science ®Google Scholar
• Marzec, K, and A. Kucaba-Pietal. 2014. “Heat Transfer Characteristic of an Impingement Cooling System with Different Nozzle Geometry.” Journal of Physics: Conference Series 530: 012038. doi:10.1088/1742-6596/530/1/012038.
   Google Scholar
• Mohapatra, SS, S V. Ravikumar, R Ranjan, SK Pal, S Brat Singh, and S. Chakraborty. 2014. “Ultra Fast Cooling and Its Effect on the Mechanical Properties of Steel.” Journal of Heat Transfer 136: 1–9. doi:10.1115/1.4025638.
   Web of Science ®Google Scholar
• Nayak, SK, PC Mishra, and SKS. Parashar. 2016. “Influence of Spray Characteristics on Heat Flux in Dual Phase Spray Impingement Cooling of Hot Surface.” Alexandria Engineering Journal 55: 1995–2004. doi:10.1016/j.aej.2016.07.015.
   Web of Science ®Google Scholar
• Nayak, SK, PC Mishra, M Ukamanal, and R. Chaini. 2018. “Experimental Result on Heat Transfer during Quenching of Hot Steel Plate by Spray Impingement.” Heat Transfer Engineering 39: 739–749. doi:10.1080/01457632.2017.1341193.
   Web of Science ®Google Scholar
• Pais, MR, LC Chow, and ET. Mahefkey. 1993. “Multiple Jet Impingement Cooling.” Journal of Thermophysics and Heat Transfer 7: 435–440. doi:10.2514/3.437.
   Web of Science ®Google Scholar
• Samuel, Olusegun David, M. Adekojo Waheed, A. Taheri-Garavand, Tikendra Nath Verma, Olawale U. Dairoe, Bukola O Bolaji, and Asif Afzal. 2021. “Prandtl Number of Optimum Biodiesel from Food Industrial Waste Oil and Diesel Fuel Blend for Diesel Engine.” Fuel 285: 119049. doi:10.1016/j.fuel.2020.119049.
   Web of Science ®Google Scholar
• Selvam, RP, L Lin, and R. Ponnappan. 2006. “Direct Simulation of Spray Cooling: Effect of Vapor Bubble Growth and Liquid Droplet Impact on Heat Transfer.” International Journal of Heat and Mass Transfer 49: 4265–4278. doi:10.1016/j.ijheatmasstransfer.2006.05.009.
   Web of Science ®Google Scholar
• Somasundaram, S, and AAO. Tay. 2013. “Comparative Study of Intermittent Spray Cooling in Single and Two Phase Regimes.” International Journal of Thermal Sciences 74: 174–182. doi:10.1016/j.ijthermalsci.2013.06.008.
   Web of Science ®Google Scholar
• Sriromreun, P, and P. Sriromreun. 2018. “Experimental and Numerical Studies of Heat Transfer Characteristics for Impinging Jet on Dimple Surfaces.” Chemical Engineering Transactions 70: 1273–1278. doi:10.3303/CET1870213.
   Google Scholar
• Suebsomran, A, and S. Butdee. 2013. “The Study of Cooling Process on Runout Table by Simulation Method.” ISRN Industrial Engineering 2013: 1–7. doi:10.1155/2013/820592.
   Google Scholar
• Sussman, M, P Smereka, and S. Osher. 1994. “A Level Set Approach for Computing Solutions to Incompressible Two-Phase Flow.” Journal of Computational Physics 114: 146–159. doi:10.1006/jcph.1994.1155.
   Web of Science ®Google Scholar
• Wang, X, and J. Zhang. 2018. “Influence of Heat Treatment on the Weld Structure and Performance of Magnesium Alloy.” Chemical Engineering Transactions 66: 367–372. doi:10.3303/CET1866062.
   Google Scholar
• Yang, J, LC Chow, and MR. Pais. 1996. “Nucleate Boiling Heat Transfer in Spray Cooling.” Journal of Heat Transfer 118: 668–671. doi:10.1115/1.2822684.
   Web of Science ®Google Scholar
• Yang, H, L Rong, X Liu, L Liu, M Fan, and N. Pei. 2020. “Experimental Research on Spray Evaporative Cooling System Applied to Air-cooled Chiller Condenser.” Energy Reports 6: 906–913. doi:10.1016/j.egyr.2020.04.001.
   Web of Science ®Google Scholar
• Zhang, Z, P-X Jiang, Y-T Hu, and J. Li. 2013. “Experimental Investigation of Continual- and Intermittent-Spray Cooling.” Experimental Heat Transfer 26: 453–469. doi:10.1080/08916152.2012.719063.
   Web of Science ®Google Scholar
• Zhang, Y, Z Wen, Z Zhao, C Bi, Y Guo, and J. Huang. 2019. “Laboratory Experimental Setup and Research on Heat Transfer Characteristics during Secondary Cooling in Continuous Casting.” Metals (Basel) 9: 61. doi:10.3390/met9010061.
   Web of Science ®Google Scholar
• Zhao, Y, X Huang, B Yu, X Yuan, and X. Liu. 2017. “Effect of Coiling Temperature on Microstructure, Properties and Resistance to Fish-Scaling of Hot Rolled Enamel Steel.” Materials (Basel) 10: 1012. doi:10.3390/ma10091012.
   PubMed Web of Science ®Google Scholar