References
- Akil, HM, C Santulli, F Sarasini, J Tirillò, and T. Valente. 2014. “Environmental Effects on the Mechanical Behaviour of Pultruded jute/glass fibre-reinforced Polyester Hybrid Composites.” Composites Science and Technology 94: 62–70. doi:10.1016/j.compscitech.2014.01.017.
- Bahadur, S, D Gong, and J. Anderegg. 1996. “Investigation of the Influence of CaS, CaO and CaF2 Fillers on the Transfer and Wear of Nylon by Microscopy and XPS Analysis.” Wear 197 (1–2): 271–279. doi:10.1016/0043-1648(96)06985-2.
- Bijwe, J, CM Logani, and US. Tewari. 1990. “Influence of Fillers and Fibre Reinforcement on Abrasive Wear Resistance of Some Polymeric Composites.” Wear 138 (1–2): 77–92. doi:10.1016/0043-1648(90)90169-B.
- Clyne, TW, and D. Hull. 2019. An Introduction to Composite Materials. New York, USA: Cambridge university press.
- Debnath, S, R Ranade, SL Wunder, J McCool, K Boberick, and G. Baran. 2004. “Interface Effects on Mechanical Properties of particle-reinforced Composites.” Dental Materials 20 (7): 677–686. doi:10.1016/j.dental.2003.12.001.
- Fleischauer, PD. 1984. “Effects of Crystallite Orientation on Environmental Stability and Lubrication Properties of Sputtered MoS2 Thin Films.” Asle Transactions 27 (1): 82–88. doi:10.1080/05698198408981548.
- Fusaro, RL. 1982. “Effect of Substrate Surface Finish on the Lubrication and Failure Mechanisms of Molybdenum Disulfide Films.” ASLE Transactions 25 (2): 141–156. doi:10.1080/05698198208983076.
- Guglani, L, and TC. Gupta. 2017. “Wear and Mechanical Properties of Nylon 66–Al2O3 Microcomposite.” Journal of Reinforced Plastics and Composites 36 (17): 1254–1262. doi:10.1177/0731684417706107.
- Hasan, MM, Y Zhou, H Mahfuz, and S. Jeelani. 2006. “Effect of SiO2 Nanoparticle on Thermal and Tensile Behavior of Nylon-6.” Materials Science and Engineering: A 429 (1–2): 181–188. doi:10.1016/j.msea.2006.05.124.
- Hemanth, G., B. Suresha, and R. Hemanth. 2019. “The Effect of Hexagonal Boron Nitride on Wear Resistance under Two and Three-Body Abrasion Modes of Polyetherketone Composites.” Surface Topography 7 (4): 045019. doi:10.1088/2051-672X/ab500b.
- Hendre, KN, and BD. Bachchhav. 2019. “Friction and Wear Characteristics of Rubber Resin-Bonded Metallic Brake Pad Materials.” International Journal of Engineering and Advanced Technology 8 (6): 1312–1316. doi:10.35940/ijeat.F8514.088619.
- Hendre, K, and B. Bachchhav 2021. “Tribological Behaviour of non-asbestos Brake Pad Material.” Materials Today: Proceedings, Hyderabad, India 38: 2549–2554. doi:10.1016/j.matpr.2020.07.560
- Jia, Z, C Hao, Y Yan, and Y. Yang. 2015. “Effects of Nanoscale Expanded Graphite on the Wear and Frictional Behaviors of polyimide-based Composites.” Wear 338: 282–287. doi:10.1016/j.wear.2015.06.019.
- Jogi, BF, M Sawant, PK Brahmankar, D Ratna, and MC. Tarhekar. 2014. “Study of Mechanical and Crystalline Behavior of Polyamide 6/hytrel/carbon Nanotubes (CNT) Based Polymer Composites.” Procedia materials science 6: 805–811. doi:10.1016/j.mspro.2014.07.097.
- Luo, J, MH Zhu, YD Wang, JF Zheng, and JL. Mo. 2011. “Study on Rotational Fretting Wear of Bonded MoS2 Solid Lubricant Coating Prepared on Medium Carbon Steel.” Tribology International 44 (11): 1565–1570. doi:10.1016/j.triboint.2010.10.011.
- Mistry, M, and KS. Randhawa 2020. “Investigations of the Influence of Hexagonal Boron Nitride Particulates on Mechanical & Tribological Properties of PA66.” Journal of Physics: Conference Series, IOP Publishing, Coimbatore, India 1706: 012180. doi:10.1088/1742-6596/1706/1/012180.
- Mohanty, S, and SK. Nayak. 2007. “Mechanical, Thermal and Viscoelastic Behavior of Nylon 6/clay Nanocomposites with Cotreated Montmorillonites.” Polymer-Plastics Technology and Engineering 46 (4): 367–376. doi:10.1080/03602550601156029.
- Naranje, V, AR Sankar, S Salunkhe, and BD. Bachchhav 2021. “Experimental Evaluation of Mechanical Properties of Epoxy Based Composite Material Using Taguchi Method.” Advances in Manufacturing Processes, pp. 381–395. Springer, Singapore. doi:10.1007/978-981-15-9117-4_28
- Panda, JN, J Bijwe, and RK. Pandey. 2019. “Role of Micro and nano-particles of hBN as a Secondary Solid Lubricant for Improving tribo-potential of PAEK Composite.” Tribology International 130: 400–412. doi:10.1016/j.triboint.2018.09.028.
- Pardee, RP. 1972. “The Effect of Humidity on low-load Frictional Properties of a Bonded Solid Film Lubricant.” Asle Transactions 15 (2): 130–142. doi:10.1080/05698197208981409.
- Pilipović, A, P Ilinčić, J Petruša, and Z. Domitran. 2020. “Influence of Polymer Composites and Memory Foam on Energy Absorption in Vehicle Application.” Polymers 12 (6): 1222. doi:10.3390/polym12061222.
- Prasad, SV, NT McDevitt, and JS. Zabinski. 1999. “Tribology of Tungsten Disulfide Films in Humid Environments: The Role of a Tailored metal-matrix Composite Substrate.” Wear 230 (1): 24–34. doi:10.1016/S0043-1648(99)00082-4.
- Rajak, DK, DD Pagar, PL Menezes, and E. Linul. 2019. “Fiber-reinforced Polymer Composites: Manufacturing, Properties, and Applications.” Polymers 11 (10): 1667. doi:10.3390/polym11101667.
- Randhawa, KS, and AD. Patel. 2020a. “Influence of Boric Anhydride Reinforcement on Mechanical Properties and Abrasive Wear of Nylon 6.” Materials Research Express 7 (5): 055303. doi:10.1088/2053-1591/ab8ee4.
- Randhawa, KS, and AD. Patel. 2020b. “Enhancing tribo-mechanical Properties & Thermal Stability of PA6 by h-BN Fillers.” e-Polymers 20 (1): 733–745. doi:10.1515/epoly-2020-0069.
- Randhawa, KS, and AD. Patel. 2021a. “A Review on tribo-mechanical Properties of micro-and nanoparticulate-filled Nylon Composites.” Journal of Polymer Engineering 41 (5): 339–355. doi:10.1515/polyeng-2020-0302.
- Randhawa, KS, and AD. Patel. 2021b. “Influence of moisture/water Absorption on Mechanical & Thermal Properties of polyamide6/boric Oxide Composites.” Pigment & Resin Technology. doi:10.1108/PRT-03-2021-0031.
- Randhawa, KS, and AD. Patel. 2021c. “The Effect of Environmental Humidity/Water Absorption on Tribo-Mechanical Performance of Polymers and Polymer Composites – A Review.” Industrial Lubrication and Tribology 73 (9): 1146–1158. doi:10.1108/ILT-02-2021-0045.
- Salomon, GA, AW De Gee, and JH. Zaat. 1964. “Mechano-chemical Factors in MoS2-film Lubrication.” Wear 7 (1): 87–101. doi:10.1016/0043-1648(64)90081-X.
- Singh, K., and S. Sharma. 2019. “Effect of Neodymium Oxide on Microstructure, Hardness and Abrasive Wear Behaviour of Microwave Clads.” Materials Research Express 6 (8): 086599. doi:10.1088/2053-1591/ab2266.
- Singh, R, N Singh, A Amendola, and F. Fraternali. 2017. “On the Wear Properties of Nylon6-SiC-Al2O3 Based Fused Deposition Modelling Feed Stock Filament.” Composites Part B: Engineering 119: 125–131. doi:10.1016/j.compositesb.2017.03.042.
- Soundararajan, R, N Jayasuriya, RG Vishnu, BG Prassad, and C. Pradeep 2019. “Appraisal of Mechanical and Tribological Properties on PA6-TiO2 Composites through Fused Deposition Modelling.” Materials Today: Proceedings, Hyderabad, India 18: 2394–2402. doi:10.1016/j.matpr.2019.07.084
- Stewart, TB, and PD. Fleischauer. 1982. “Chemistry of Sputtered Molybdenum Disulfide Films.” Inorganic Chemistry 21 (6): 2426–2431. doi:10.1021/ic00136a060.
- Unal, H, A Mimaroglu, and M. Alkan. 2004. “Mechanical Properties and Morphology of Nylon‐6 Hybrid Composites.” Polymer International 53 (1): 56–60. doi:10.1002/pi.1246.
- Vyas, A, and KS. Randhawa. 2021. “Influence of h-BN Fillers on Mechanical and Tribological Properties of PP/PA6 Blend.” World Journal of Engineering 662944. doi:10.1108/WJE-12-2020-0635.
- Wang, HD, BS Xu, JJ Liu, and DM. Zhuang. 2007. “Molybdenum Disulfide Coating Deposited by Hybrid Treatment and Its friction-reduction Performance.” Surface & Coatings Technology 201 (15): 6719–6722. doi:10.1016/j.surfcoat.2006.09.086.
- Wang, RM, SR Zheng, and YP. Zheng. 2011. “Polymer Matrix Composites and Technology.” Elsevier 513–544.
- You, YL, DX Li, GJ Si, and X. Deng. 2014. “Investigation of the Influence of Solid Lubricants on the Tribological Properties of Polyamide 6 Nanocomposite.” Wear 311 (1–2): 57–64. doi:10.1016/j.wear.2013.12.018.
- Zhao, LX, LY Zheng, and SG. Zhao. 2006. “Tribological Performance of nano-Al2O3 Reinforced Polyamide 6 Composites.” Materials Letters 60 (21–22): 2590–2593. doi:10.1016/j.matlet.2006.01.042.
- Zheng, LY, KT Lau, LX Zhao, YQ Zhang, and D. Hui. 2009. “Mechanical and Thermal Properties of nano-Al2O3/nylon 6 Composites.” Chemical Engineering Communications 197 (3): 343–351. doi:10.1080/00986440903088892.
- Zhou, J, and JP. Lucas. 1995. “The Effects of a Water Environment on Anomalous Absorption Behavior in graphite/epoxy Composites.” Composites Science and Technology 53 (1): 57–64. doi:10.1016/0266-3538(94)00078-6.