Parametric investigation of particulate matter emissions in a gasoline direct injection engine using computational fluid dynamics modelling

References

• An, Y., X. Li, S. Teng, K. Wang, Y. Pei, J. Qin, and H. Zhao. 2016a. “Development of a soot particle model with PAHs as precursors through simulations and experiments.” Fuel 179: 246–257. doi:10.1016/j.fuel.2016.03.100.
   Web of Science ®Google Scholar
• An, Y., Y. Pei, J. Qin, H. Zhao, S. Teng, B. Li, and X. Li. 2016b. “Development of a PAH (polycyclic aromatic hydrocarbon) formation model for gasoline surrogates and its application for GDI (gasoline direct injection) engine CFD (computational fluid dynamics) simulation.” Energy 94: 367–379. doi:10.1016/j.energy.2015.11.014.
   Web of Science ®Google Scholar
• An, Y., S. Teng, Y. Pei, J. Qin, X. Li, and H. Zhao. 2016c. “An experimental study of polycyclic aromatic hydrocarbons and soot emissions from a GDI engine fueled with commercial gasoline.” Fuel 164: 160–171. doi:10.1016/j.fuel.2015.10.007.
   Web of Science ®Google Scholar
• Andersson, J., B. Giechaskiel, R. Muñoz-Bueno, E. Sandbach, and P. Dilara. “Particle Measurement Programme (PMP) Light-Duty Inter-Laboratory Correlation Exercise (ILCE_LD) Final Report.” 2007.
   Google Scholar
• Angelberger, C., T. Poinsot, and B. Delhay. SAE Tech. Pap. 1997.
   Google Scholar
• Aubagnac-Karkar, D., J.-B. Michel, O. Colin, P. E. Vervisch-Kljakic, and N. Darabiha. 2015. “Sectional soot model coupled to tabulated chemistry for diesel RANS simulations.” Combustion and Flame 162 (8): 3081–3099. doi:10.1016/j.combustflame.2015.03.005.
   Web of Science ®Google Scholar
• Bai, C., and A. D. Gosman. 1995. SAE International.
   Google Scholar
• Bai, C., and A. D. Gosman. 1996. SAE Technical Papers.
   Google Scholar
• Bonatesta, F., E. Chiappetta, and A. La Rocca. 2014. “Part-load particulate matter from a GDI engine and the connection with combustion characteristics.” Applied Energy 124: 366–376. doi:10.1016/j.apenergy.2014.03.030.
   Web of Science ®Google Scholar
• Bonatesta, F., S. La Rocca, E. Hopkins, and D. Bell. SAE Technical Papers. 2014.
   Google Scholar
• Braisher, M., R. Stone, and P. Price. SAE Technical Papers. 2010.
   Google Scholar
• Brugge, D., J. L. Durant, and C. Rioux. 2007. “Near-highway pollutants in motor vehicle exhaust: A review of epidemiologic evidence of cardiac and pulmonary health risks.” Environmental Health 6 (1): 23. doi:10.1186/1476-069X-6-23.
   PubMed Web of Science ®Google Scholar
• Cho, J, W Si, W Jang, D Jin, C L Myung, and S. Park. 2015. “Impact of intermediate ethanol blends on particulate matter emission from a spark ignition direct injection (SIDI) Engine.” Applied Energy 160: 592–602. doi:10.1016/j.apenergy.2015.08.010.
   Web of Science ®Google Scholar
• Costa, M., L. Marchitto, S. S. Merola, and U. Sorge. 2014. “Study of mixture formation and early flame development in a research GDI (Gasoline Direct Injection) engine through numerical simulation and UV-digital imaging.” Energy 77: 88–96. doi:10.1016/j.energy.2014.04.114.
   Web of Science ®Google Scholar
• Costa, M., U. Sorge, P. Sementa, and B. M. Vaglieco. 2015. “CFD Modeling of a Mixed Mode Boosted GDI Engine and Performance Optimization for the Avoidance of Knocking.” In Simulation and Modeling Methodologies, Technologies and Applications, edited by M. S. Obaidat, T. Ören, J. Kacprzyk, and J. Filipe, 195–215. Cham: Springer.
   Google Scholar
• Demuynck, J., C. Favre, D. Bosteels, H. Hamje, and J. Andersson. “Real-world emissions measurements of a gasoline direct injection vehicle without and with a gasoline particulate filter.” 2017.
   Google Scholar
• Dong, Z., S. Shuai, Z. Wang, and H. Zhao. 2016. SAE Technical Papers
   Google Scholar
• Etheridge, J., S. Mosbach, M. Kraft, H. Wu, and N. Collings. 2011. “Modelling soot formation in a DISI engine.” Proceedings of the Combustion Institute 33 (2): 3159–3167. doi:10.1016/j.proci.2010.07.039.
   Google Scholar
• Friedrich, M. A., H. Lan, J. L. Wegener, J. A. Drallmeier, and B. F. Armaly. 2008. “A separation criterion with experimental validation for shear-driven films in separated flows.” Journal of Fluids Engineering 130 (5): 051301. doi:10.1115/1.2907405.
   Web of Science ®Google Scholar
• Givler, S. D., M. Raju, E. Pomraning, P. K. Senecal, N. Salman, and R. Reese. 2013. SAE Technical Papers.
   Google Scholar
• Gong, Z., L. Feng, and Z. Wang. 2019. “Experimental and numerical study of the effect of injection strategy and intake valve lift on super-knock and engine performance in a boosted GDI engine.” Fuel 249: 309–325. doi:10.1016/j.fuel.2019.03.005.
   Web of Science ®Google Scholar
• Gupta, S.B., B. Bihari, M. Biruduganti, and R. Sekar. 2011. “In-cylinder equivalence ratio measurements in an EGR equipped engine.” Journal of Engineering for Gas Turbines and Power 133 (11): 114504. doi:10.1115/1.4003789
   Web of Science ®Google Scholar
• Han, D., A. M. Ickes, S. V. Bohac, Z. Huang, and D. N. Assanis. 2012. “HC and CO emissions of premixed low-temperature combustion fueled by blends of diesel and gasoline.” Fuel 99: 13–19. doi:10.1016/j.fuel.2012.04.010.
   Web of Science ®Google Scholar
• He, X., M. A. Ratcliff, and B. T. Zigler. 2012. “Effects of gasoline direct injection engine operating parameters on particle number emissions.” Energy & Fuels 26 (4): 2014–2027. doi:10.1021/ef201917p.
   Web of Science ®Google Scholar
• Hedge, M., P. Weber, J. Gingrich, T. Alger, and I.A. Khalek. 2011. “Effect of EGR on particle emissions from a GDI engine.” SAE International Journal of Engines 4 (1): 2011-01–0636. doi:10.4271/2011-01-0636.
   Google Scholar
• Heyder, J. “Deposition of inhaled particles in the human respiratory tract and consequences for regional targeting in respiratory drug delivery.” In Proceedings of the American Thoracic Society, American Thoracic Society, 2004; Vol. 1, pp 315–320.
   Google Scholar
• Heywood, J. 1988. Internal Combustion Engine Fundamentals. New York: McGraw-Hill Education.
   Google Scholar
• Jiao, Q., and R. D. Reitz. 2015. “Modeling soot emissions from wall films in a direct-injection spark-ignition engine.” International Journal of Engine Research 16 (8): 994–1013. doi:10.1177/1468087414562008.
   Web of Science ®Google Scholar
• Kim, J., N. Kim, and K. Min. 2016. SAE Technical Papers.
   Google Scholar
• Kim, T., J. Song, and S. Park. 2015. “Effects of turbulence enhancement on combustion process using a double injection strategy in direct-injection spark-ignition (DISI) gasoline engines.” International Journal of Heat and Fluid Flow 56: 124–136. doi:10.1016/j.ijheatfluidflow.2015.07.013.
   Web of Science ®Google Scholar
• Leach, F., R. Stone, D. Richardson, A. Lewis, S. Akehurst, J. Turner, S. Remmert, et al. 2018. “Particulate emissions from a highly boosted gasoline direct injection engine.” International Journal of Engine Research 19 (3): 347–359. doi:10.1177/1468087417710583.
   Web of Science ®Google Scholar
• Li, L., T. Wang, J. Duan, and K. Sun. 2019. “Impact of butanol isomers and EGR on the combustion characteristics and emissions of a SIDI engine at various injection timings.” Applied Thermal Engineering 151: 417–430. doi:10.1016/j.applthermaleng.2019.01.082.
   Web of Science ®Google Scholar
• Marchal, C. Modélisation de la formation et de l’oxydation des suies dans un moteur automobile, université d’orléans, 2008.
   Google Scholar
• Maricq, M. M., J. J. Szente, and K. Jahr. 2012. “The impact of ethanol fuel blends on pm emissions from a light-duty GDI vehicle.” Aerosol Science and Technology 46 (5): 576–583. doi:10.1080/02786826.2011.648780.
   Web of Science ®Google Scholar
• Olmo, L., and J. Thornton. “SAE Tech. Pa0070.” 2005
   Google Scholar
• Patterson, M. A., and R. D. Reitz. 1998. SAE International.
   Google Scholar
• Peters, A., B. Veronesi, L. Calderón-Garcidueñas, P. Gehr, L. C. Chen, M. Geiser, W. Reed, B. Rothen-Rutishauser, S. Schürch, and H. Schulz. 2006. “Translocation and potential neurological effects of fine and ultrafine particles a critical update.“ Particle and Fibre Toxicology 8 (3): 13. doi:10.1186/1743-8977-3-13.
   Google Scholar
• Price, P., B. Twiney, R. Stone, K. Kar, and H. Walmsley. 2007. SAE Technical Papers.
   Google Scholar
• Qian, Y., Z. Li, L. Yu, X. Wang, and X. Lu. 2019. “Review of the state-of-the-art of particulate matter emissions from modern gasoline fueled engines.” Applied Energy 238: 1269–1298. doi:10.1016/j.apenergy.2019.01.179.
   Web of Science ®Google Scholar
• Qin, J., X. Li, and Y. Pei. 2014. SAE Technical Papers.
   Google Scholar
• Rodi, W. “Influence of Buoyancy and Rotation on Equations for the Turbulent Length Scale.” In Symposium on Turbulent Shear Flows; London, 1979; pp 10.37–10.42.
   Google Scholar
• Rodriguez, JF, and WK. Cheng. 2015. “Effect of operation strategy on first cycle CO, HC, and PM/PN emissions in a GDI engine.” SAE International Journal of Engines 8 (3): 01–0887. doi:10.4271/2015-01-0887.
   Google Scholar
• Rosa, N. G., P. Villedieu, J. Dewitte, and G. Lavergne. “A new droplet-wall interaction model.” In 10th International Conference on Liquid Atomization and Spray Systems (ICLASS-2006); Kyoto, 2006.
   Google Scholar
• Rotondi, R., and G. Bella. 2006. “Gasoline direct injection spray simulation.” International Journal of Thermal Sciences 45 (2): 168–179. doi:10.1016/j.ijthermalsci.2005.06.001.
   Web of Science ®Google Scholar
• Sabathil, D., A. Koenigstein, P. Schaffner, J. Fritzsche, and A. Doehler. SAE Technical Papers. 2011.
   Google Scholar
• Sciortino, D, F. Bonatesta, D. Morrey, C. Yang, E. Hopkins, E. Hopkins, C. Yang, et al. 2017. “A combined experimental and computational fluid dynamics investigation of particulate matter emissions from a wall-guided gasoline direct injection engine.” Energies 10 (9): 1408. doi:10.3390/en10091408.
   Web of Science ®Google Scholar
• Szybist, J. P., A. D. Youngquist, T. L. Barone, J. M. Storey, W. R. Moore, M. Foster, K. Confer, et al. 2011. “Ethanol blends and engine operating strategy effects on light-duty spark-ignition engine particle emissions.” Energy & Fuels 25 (11): 4977–4985. doi:10.1021/ef201127y.
   Web of Science ®Google Scholar
• Tan, J. Y., F. Bonatesta, H. K. Ng, and S. Gan. 2016. “Developments in computational fluid dynamics modelling of gasoline direct injection engine combustion and soot emission with chemical kinetic modelling.” Applied Thermal Engineering 107: 936–959. doi:10.1016/j.applthermaleng.2016.07.024.
   Web of Science ®Google Scholar
• Tan, J. Y., F. Bonatesta, H. K. Ng, and S. Gan. 2020. “Numerical investigation of particulate matter processes in gasoline direct injection engines through integrated computational fluid dynamics–chemical kinetic modeling.” Energy & Fuels 34 (4): 4909–4924. doi:10.1021/acs.energyfuels.9b03945.
   Web of Science ®Google Scholar
• Wang, B., S. Mosbach, S. Schmutzhard, S. Shuai, Y. Huang, and M. Kraft. 2016. “Modelling soot formation from wall films in a gasoline direct injection engine using a detailed population balance model.” Applied Energy 163: 154–166. doi:10.1016/j.apenergy.2015.11.011.
   Web of Science ®Google Scholar
• Yakhot, V., S. A. Orszag, S. Thangam, T. B. Gatski, and C. G. Speziale. 1992. “Development of turbulence models for shear flows by a double expansion technique.” Physics of Fluids A: Fluid Dynamics 4 (7): 1510–1520. doi:10.1063/1.858424.
   Web of Science ®Google Scholar
• Zhao, F, M C Lai, and D Harrington. 1999. “Automotive spark-ignited direct-injection gasoline engines.” Progress in Energy and Combustion Science 25 (5): 437–562. doi:10.1016/S0360-1285(99)00004-0.
   Web of Science ®Google Scholar