A review on experimental and numerical studies on micro deep drawing considering size effects and key process parameters

References

• Aminzahed, I., M. M. Mashhadi, and M. R. V. Sereshk. 2017. “Influence of Drawn Radius in Micro Deep Drawing Process of Rectangular Work Pieces via Size Dependent Analysis Using Piezoelectric Actuator.” International Journal on Interactive Design and Manufacturing (Ijidem) 11 (4): 893–902. doi:10.1007/s12008-015-0283-2.
   Google Scholar
• Aminzahed, I., M. M. Mashhadi, and M. R. V. Sereshk. 2017. “Investigation of Holder Pressure and Size Effects in Micro Deep Drawing of Rectangular Work Pieces Driven by Piezoelectric Actuator.” Materials Science and Engineering: C 71: 685–689. doi:10.1016/j.msec.2016.10.068.
   PubMed Web of Science ®Google Scholar
• Behrens, G., J. Kovac, B. Koehler, F. Vollertsen, and H. R. Stock. 2012. “Drawability of Thin Magnetron Sputtered Al–Zr Foils in Micro Deep Drawing.” Transactions of Nonferrous Metals Society of China 22: s268–s274. doi:10.1016/S1003-6326(12)61718-X.
   Web of Science ®Google Scholar
• Behrens, G., M. Ruhe, H. Tetzel, and F. Vollertsen. 2015. “Effect of Tool Geometry Variations on the Punch Force in Micro Deep Drawing of Rectangular Components.” Production Engineering 9 (2): 195–201. doi:10.1007/s11740-015-0604-0.
   Google Scholar
• Behrens, G., and F. Vollertsen. 2013. “Influence of Tool Geometry Variation on the Punch Force in Micro Deep Drawing.” In Key Engineering Materials, Vol. 554, 1306–1311. Switzerland: Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/KEM.554-557.1306
   Google Scholar
• Chen, F. K., T. B. Huang, and C. K. Chang. 2003. “Deep Drawing of Square Cups with Magnesium Alloy AZ31 Sheets.” International Journal of Machine Tools and Manufacture 43 (15): 1553–1559. doi:10.1016/S0890-6955(03)00198-6.
   Web of Science ®Google Scholar
• Chen, C-H., R-S. Lee, and J-T. Gau. 2010. “Size Effect and Forming-limit Strain Prediction for Microscale Sheet Metal Forming of Stainless Steel 304.” The Journal of Strain Analysis for Engineering Design 45: 283–299. doi:10.1243/03093247JSA585.
   Web of Science ®Google Scholar
• Chen, F. K., and S. Y. Lin. 2007. “A Formability Index for the Deep Drawing of Stainless Steel Rectangular Cups.” The International Journal of Advanced Manufacturing Technology 34 (9–10): 878. doi:10.1007/s00170-006-0659-3.
   Web of Science ®Google Scholar
• Flosky, H., and F. Vollertsen. 2013. “Wear Behavior of a DLC-coated Blanking and Deep Drawing Tool Combination.” In Key Engineering Materials, Vol. 549, 511–517. Switzerland: Trans Tech Publications.https://doi.org/10.4028/www.scientific.net/KEM.549.511.
   Google Scholar
• Fu, M.W., and W.L. Chan. 2013. “A Review on the State-of-the-art Microforming Technologies.” International Journal of Advanced Manufature Technology 67: 2411–2437. doi:10.1007/s00170-012-4661-7.
   Web of Science ®Google Scholar
• Fu, M.W., J.L. Wang, and A.M. Korsunsky. 2016. “A Review of Geometrical and Microstructural Size Effects in Micro-scale Deformation Processing of Metallic Alloy Components.” International Journal of Machine Tools and Manufacture 109: 94–125. doi:10.1016/j.ijmachtools.2016.07.006.
   Web of Science ®Google Scholar
• Fu, M.W., B. Yang, and W.L. Chan. 2013. “Experimental and Simulation Studies of Micro Blanking and Deep Drawing Compound Process Using Copper Sheet.” Journal of Materials Processing Technology 213: 101–110. doi:10.1016/j.jmatprotec.2012.08.007.
   Web of Science ®Google Scholar
• Gau, Jenn-Terng, Sujith Teegala, Kun-Min Huang, Tun-Jen Hsiao, and Bor-Tsuen Lin. 2013a. “Using Micro Deep Drawing with Ironing Stages to Form Stainless Steel 304 Micro Cups.” Journal of Manufacturing Processes 15 (2): 298–305. doi:10.1016/j.jmapro.2013.01.009.
   Web of Science ®Google Scholar
• Gau, Jenn-Terng, Sujith Teegala, Kun-Min Huang, Tun-Jen Hsiao, and Bor-Tsuen Lin. 2013b. “Using Micro Deep Drawing with Ironing Stages to Form Stainless Steel 304 Micro Cups.” Journal of Manufacturing Processes 15 (2): 298–305. doi:10.1016/j.jmapro.2013.01.009.
   Web of Science ®Google Scholar
• Geiger, M., M. Kleiner, R. Eckstein, N. Tiesler, and U. Engel. 2001. “Microforming.” CIRP Annals 50 (2): 445–462. doi:10.1016/S0007-8506(07)62991-6.
   Web of Science ®Google Scholar
• Gong, F., B. Guo, C. J. Wang, and D B. Shan. 2010. “Effects of Lubrication Conditions on Micro Deep Drawing.” Microsystem Technologies 16 (10): 1741–1747. doi:10.1007/s00542-010-1108-7.
   Web of Science ®Google Scholar
• Gong, F., B. Guo, C. Wang, and D. Shan. 2011. “Micro Deep Drawing of Micro Cups by Using DLC Film Coated Blank Holders and Dies.” Diamond and Related Materials 20 (2): 196–200. doi:10.1016/j.diamond.2010.11.025.
   Web of Science ®Google Scholar
• Gong, F., Z. Yang, Q. Chen, Z. Xie, D. Shu, and J. Yang. 2015. “Influences of Lubrication Conditions and Blank Holder Force on Micro Deep Drawing of C1100 Micro Conical–cylindrical Cup.” Precision Engineering 42: 224–230. doi:10.1016/j.precisioneng.2015.05.004.
   Web of Science ®Google Scholar
• Guo, N., C. Y. Sun, and M. W. Fu. 2017. “Size Effect Affected Deformation Characteristics in Micro Deep Drawing of TWIP Domed-bottom Cups.” Procedia Engineering 207: 2072–2077. doi:10.1016/j.proeng.2017.10.1066.
   Google Scholar
• Guo, N., J. Wang, C. Y. Sun, Y. F. Zhang, and M. W. Fu. 2020. “Analysis of Size Dependent Earing Evolution in Micro Deep Drawing of TWIP Steel by Using Crystal Plasticity Modeling.” International Journal of Mechanical Sciences 165: 105200. doi:10.1016/j.ijmecsci.2019.105200.
   Web of Science ®Google Scholar
• Hu, Z. 2011. “Realisation and Application of Size Dependent FEM-simulation for Deep Drawing of Rectangular Work Pieces.” CIRP Journal of Manufacturing Science and Technology 4 (1): 90–95. doi:10.1016/j.cirpj.2011.05.006.
   Google Scholar
• Hu, Z., A. Schubnov, and F. Vollertsen. 2012. “Tribological Behaviour of DLC-films and Their Application in Micro Deep Drawing.” Journal of Materials Processing Technology 212 (3): 647–652. doi:10.1016/j.jmatprotec.2011.10.012.
   Web of Science ®Google Scholar
• Huang, Y. M., Y. W. Tsai, and C. L. Li. 2008. “Analysis of Forming Limits in Metal Forming Processes.” Journal of Materials Processing Technology 201 (1–3): 385–389. doi:10.1016/j.jmatprotec.2007.11.279.
   Web of Science ®Google Scholar
• Huang, Y. M., Y. S. Wu, and J. Y. Huang. 2014. “The Influence of Ultrasonic Vibration-assisted Micro-deep Drawing Process.” The International Journal of Advanced Manufacturing Technology 71 (5–8): 1455–1461. doi:10.1007/s00170-013-5553-1.
   Web of Science ®Google Scholar
• Irthiea, I. 2019. “Experimental and Numerical Evaluation of Micro Flexible Deep Drawing Technique Using Floating Ring.” Journal of Manufacturing Processes 38: 556–563. doi:10.1016/j.jmapro.2019.01.050.
   Web of Science ®Google Scholar
• Irthiea, I. K., and G. Green. 2017. “Evaluation of Micro Deep Drawing Technique Using Soft Die-simulation and Experiments.” The International Journal of Advanced Manufacturing Technology 89 (5–8): 2363–2374. doi:10.1007/s00170-016-9167-2.
   Web of Science ®Google Scholar
• Irthiea, I., G. Green, S. Hashim, and A. Kriama. 2014. “Experimental and Numerical Investigation on Micro Deep Drawing Process of Stainless Steel 304 Foil Using Flexible Tools.” International Journal of Machine Tools and Manufacture 76: 21–33. doi:10.1016/j.ijmachtools.2013.09.006.
   Web of Science ®Google Scholar
• Jia, F., J. Zhao, L. Luo, H. Xie, and Z. Jiang. 2017. “Experimental and Numerical Study on Micro Deep Drawing with Aluminium-copper Composite Material.” Procedia Engineering 207: 1051–1056. doi:10.1016/j.proeng.2017.10.1129.
   Google Scholar
• Jiang, Z., J. Zhao, H. Lu, D. Wei, K-I. Manabe, X. Zhao, X. Zhang, et al. 2017. “Influences of Temperature and Grain Size on the Material Deformability in Microforming Process.” International Journal Material Forming 10: 753–764. doi:10.1007/s12289-016-1317-4.
   Web of Science ®Google Scholar
• Justinger, H., and G. Hirt. 2007. “Analysis of Size-effects in the Miniaturized Deep Drawing Process.” In Key Engineering Materials, Vol. 344, 791–798. Switzerland: Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/KEM.344.791.
   Google Scholar
• Kamali, H., H. Xie, F. Jia, H. Wu, H. Zhao, H. Zhang, Z. Li, and Z. Jiang. 2019. “Effects of Nano-particle Lubrication on Micro Deep Drawing of Mg-Li Alloy.” The International Journal of Advanced Manufacturing Technology 104 (9–12): 4409–4419. doi:10.1007/s00170-019-04267-z.
   Web of Science ®Google Scholar
• Kamali, H., H. Xie, H. Zhao, F. Jia, H. Wu, and Z. Jiang. 2020. “Frictional Size Effect of Light-weight Mg–Li Alloy in Micro Deep Drawing under Nano-particle Lubrication Condition.” Materials Transactions 61 (2): 239–243. doi:10.2320/matertrans.MT-ML2019002.
   Web of Science ®Google Scholar
• Kuo, CC., BT. Lin, and WT. Wang. 2019. “Optimization of Microridge Punch Design for Deep Drawing Process by Using the Fuzzy Taguchi Method.” International Journal of Advanced Manufature Technology 103: 177–186. doi:10.1007/s00170-019-03515-6.
   Web of Science ®Google Scholar
• Li, W. T., M. W. Fu, J. L. Wang, and B. Meng. 2016. “Grain Size Effect on Multi-stage Micro Deep Drawing of Micro Cup with Domed Bottom.” International Journal of Precision Engineering and Manufacturing 17 (6): 765–773. doi:10.1007/s12541-016-0094-9.
   Web of Science ®Google Scholar
• Li, Y., G. Wang, S. Liu, J. Yang, C. Yang, and K. Zhang. 2017. “Drawability and Size Effects for Micro-arrayed Deep Drawing of Ni-Co/GO Nanocomposite Foils.” Journal of Materials Processing Technology 249: 221–228. doi:10.1016/j.jmatprotec.2017.06.002.
   Web of Science ®Google Scholar
• Lu, G. H. Xu, Z. Y., Wang, R. M., and Wang, Y. 2011. “Experimental Study of Micro Deep Drawing for H62 Brass.” In Key Engineering Materials, Vol. 464, 548–551. Switzerland: Trans Tech Publications.https://doi.org/10.4028/www.scientific.net/KEM.464.548.
   Google Scholar
• Luo, L., Z. Jiang, and D. Wei. 2017. “Influences of Micro-friction on Surface Finish in Micro Deep Drawing of SUS304 Cups.” Wear 374: 36–45. doi:10.1016/j.wear.2016.11.043.
   Web of Science ®Google Scholar
• Luo, L., Z. Jiang, D. Wei, and F. Jia. 2021a. “A Study of Influence of Hydraulic Pressure on Micro-hydromechanical Deep Drawing considering Size Effects and Surface Roughness.” Wear, 203803.
   Google Scholar
• Luo, L., Z. Jiang, D. Wei, K. Manabe, and H. Sato. 2015. “Experimental and Numerical Study of Micro Deep Drawing.” MATEC Web of Conferences, Crowne Plaza Glasgow, Scotland, UK, August 6-9.
   Google Scholar
• Luo, L., Z. Jiang, D. Wei, K. I. Manabe, X. Zhao, D. Wu, and T. Furushima. 2016. “Effects of Surface Roughness on Micro Deep Drawing of Circular Cups with Consideration of Size Effects.” Finite Elements in Analysis and Design 111: 46–55. doi:10.1016/j.finel.2015.11.005.
   Web of Science ®Google Scholar
• Luo, L., Z. Jiang, D. Wei, X. Wang, C. Zhou, and Q. Huang. 2018. “Micro-hydromechanical Deep Drawing of Metal Cups with Hydraulic Pressure Effects.” Frontiers of Mechanical Engineering 13 (1): 66–73. doi:10.1007/s11465-018-0468-z.
   Web of Science ®Google Scholar
• Luo, L., D. Wei, X. Wang, C. Zhou, Q. Huang, J. Xu, Z. Jiang, and Z. Jiang. 2017. “Effects of Hydraulic Pressure on Wrinkling and Earing in Micro Hydro Deep Drawing of SUS304 Circular Cups.” The International Journal of Advanced Manufacturing Technology 90 (1–4): 189–197. doi:10.1007/s00170-016-9380-z.
   Web of Science ®Google Scholar
• Luo, L., D. Wei, G. Zu, and Z. Jiang. 2021b. “Influence of Blank Holder-die Gap on Micro-deep Drawing of SUS304 Cups.” International Journal of Mechanical Sciences 191: 106065. doi:10.1016/j.ijmecsci.2020.106065.
   Web of Science ®Google Scholar
• Mahmood, Z. H. Irthiea, I. K., and Ahmed, A. K. 2020. “Optimization of Initial Blank Shape for Flexible Micro Deep Drawing of Square Parts. Materials Today: Proceedings 20 (4): 555–559. doi:10.1016/j.matpr.2019.09.188.
   Google Scholar
• Manabe, K., T. Shimizu, H. Koyama, M. Yang, and K. Ito. 2008. “Validation of FE Simulation Based on Surface Roughness Model in Micro-deep Drawing.” Journal of Materials Processing Technology 204 (1–3): 89–93. doi:10.1016/j.jmatprotec.2007.10.081.
   Web of Science ®Google Scholar
• Molotnikov, A., R. Lapovok, C. F. Gu, C. H. J. Davies, and Y. Estrin. 2012. “Size Effects in Micro Cup Drawing.” Materials Science and Engineering: A 550: 312–319. doi:10.1016/j.msea.2012.04.079.
   Web of Science ®Google Scholar
• Mousavi, A., M. Schomäcker, and A. Brosius. 2014. “Macro and Micro Structuring of Deep Drawing’s Tools for Lubricant Free Forming.” Procedia Engineering 81: 1890–1895. doi:10.1016/j.proeng.2014.10.252.
   Google Scholar
• Preverjanjem, E. I. Z. E., and H. Kurtaran. 2016. “Modeling the Deep Drawing of an AISI 304 Stainless-steel Rectangular Cup Using the Finite-element Method and an Experimental Validation.” Materiali in tehnologije 50 (6): 961–965. doi:10.17222/mit.2015.278.
   Web of Science ®Google Scholar
• Sato, H., K. Manabe, K. Ito, D. Wei, Z. Jiang, et al. 2015. “Development of Servo-type Micro-hydromechanical Deep-drawing Apparatus and Micro Deep-drawing Experiments of Circular Cups.” Journal of Materials Processing Technology 224: 233–239. doi:10.1016/j.jmatprotec.2015.05.014.
   Web of Science ®Google Scholar
• Sato, H., K. I. Manabe, D. Wei, Z. Jiang, S. Alexandrov. 2016. “Tribological Behavior in Micro-sheet Hydroforming.” Tribology International 97: 302–312. doi:10.1016/j.triboint.2016.01.041.
   Web of Science ®Google Scholar
• Shimizu, T., M. Ogawa, M. Yang, K-I. Manabe. 2014. “Plastic Anisotropy of Ultra-thin Rolled Phosphor Bronze Foils and Its Thickness Strain Evolution in Micro-deep Drawing.” Materials & Design (1980-2015) 56: 604–612. doi:10.1016/j.matdes.2013.11.048.
   Web of Science ®Google Scholar
• Su, H. S., Chen, F. K., and Tu, K. Y. 2011, May. “Micro‐Drawing of Circular Cups with Thin Stainless Steel Sheets.” AIP Conference Proceedings (Vol. 1353, 1, pp. 270–275), American Institute of Physics, 27-29 April 2011, Queen's University, Belfast. doi: 10.1063/1.3589527.
   Google Scholar
• Takalkar, A.S., and M. L. Babu. 2019. “A Review on Effect of Thinning, Wrinkling and Spring-back on Deep Drawing Process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233 ( 4): 1011–1036. doi:10.1177/0954405417752509.
   Web of Science ®Google Scholar
• Vollertsen, F. 2008. “Categories of Size Effects.” Production Engineering Research Development 2: 377–383. doi:10.1007/s11740-008-0127-z.
   Google Scholar
• Vollertsen, F. 2011. “Size Effects in Micro Forming.” In Key Engineering Materials, Vol. 473, 3–12. Switzerland: Trans Tech Publications.https://doi.org/10.4028/www.scientific.net/KEM.473.3
   Google Scholar
• Vollertsen, F., D. Biermann, H. N. Hansen, I. S. Jawahir, and K. Kuzman. 2009. “Size Effects in Manufacturing of Metallic Components.” CIRP Annals 58 (2): 566–587. doi:10.1016/j.cirp.2009.09.002.
   Web of Science ®Google Scholar
• Vollertsen, F., Z. Hu, H. R. Stock, B. Koehler. 2010. “On the Limit Drawing Ratio of Magnetron Sputtered Aluminium–scandium Foils within Micro Deep Drawing.” Production Engineering Research Development 4:451–456. doi:10.1007/s11740-010-0229-2.
   Google Scholar
• Wang, C. J., G. U. O. Bin, and D. B. Shan. 2009. “Effect of Die Cavity Dimension on Micro U Deep Drawing Behaviour with T2 Foil.” Transactions of Nonferrous Metals Society of China 19: s790–s794. doi:10.1016/S1003-6326(10)60153-7.
   Web of Science ®Google Scholar
• Wang, C. J., L. D. Cheng, Y. Liu, H. Zhang, Y. Wang, D. B. Shan, and B. Guo. 2019. “Research on Micro-deep Drawing Process of Conical Part with Ultra-thin Copper Foil Using Multi-layered DLC Film-coated Die.” The International Journal of Advanced Manufacturing Technology 100 (1–4): 569–575. doi:10.1007/s00170-018-2757-4.
   Web of Science ®Google Scholar
• Wang, C., B. Guo, D. Shan, and X. Bai. 2013. “Experimental Research on Micro-deep Drawing Processes of Pure Gold Thin Sheet Using DLC-coated Female Die.” The International Journal of Advanced Manufacturing Technology 67 (9): 2477–2487. doi:10.1007/s00170-012-4665-3.
   Web of Science ®Google Scholar
• Wang, G., Y. Li, S. Liu, J. Yang, and M. Yang. 2018. “Micro Deep Drawing of T2 Copper Foil Using Proportional Decreased Tools.” The International Journal of Advanced Manufacturing Technology 95 (1): 277–285. doi:10.1007/s00170-017-1111-6.
   Web of Science ®Google Scholar
• Wang, C-J., C-J. Wang, B. Guo, and D-B. Shan. 2014. “Effects of Tribological Behavior of DLC Film on Micro-deep Drawing Processes.” Transactions of Nonferrous Metals Society of China 24 (9): 2877–2882. doi:10.1016/S1003-6326(14)63421-X.
   Web of Science ®Google Scholar
• Witulski, N., H. Justinger, and G. Hirt. 2004, June. “Validation of FEM‐simulation for Micro Deep Drawing Process Modeling.” AIP conference proceedings (Vol. 712, 1, pp. 952–957). American Institute of Physics.
   Google Scholar
• Yeh, F. H., Li, C. L., Tsay, and K. N. 2012a. “An Analysis of Forming Limit for Various Arc Radii of Punch in Micro Deep Drawing of the Square Cup.” In Advanced Materials Research, Vol. 433, 660–665 . Switzerland: Trans Tech Publications.https://doi.org/10.4028/www.scientific.net/AMR.433-440.660.
   Google Scholar
• Yeh, F. H., Li, C. L., and Tsay, K. N. 2012b. “An Analysis of Forming Limit in Micro Deep Drawing of the Square Cup for Anisotropic Foil.” In Applied Mechanics and Materials, Vol. 105, 344–347. Switzerland: Trans Tech Publications. https://www.researchgate.net/publication/252916842_An_Analysis_of_Forming_Limit_in_Micro_Deep_Drawing_of_the_Square_Cup_for_Anisotropic_Foil
   Google Scholar
• Zhao, J., T. Wang, F. Jia, Z. Li, C. Zhou, Q. Huang, Z. Jiang. 2021. “Experimental Investigation on Micro Deep Drawing of Stainless Steel Foils with Different Microstructural Characteristics.” Chinese Journal of Mechanical Engineering 34: 1–11. doi:10.1186/s10033-021-00556-5.
   Web of Science ®Google Scholar