Low plasticity burnishing surface treatment: impact on surface integrity parameters of turned cylindrical Ti- 6Al-4V specimen

References

• a, Hassan, H.F. Al-Jalil, and A.A. Ebied. 1998. “Burnishing Force and Number of Ball Passes for the Optimum Surface Finish of Brass Components.” Journal of Materials Processing Technology 83 (1–3): 176–179. doi:10.1016/S0924-0136(98)00058-2.
   Web of Science ®Google Scholar
• Abrão, B. Denkena, J. Köhler, B. Breidenstein, and T. Mörke. “The Influence of Deep Rolling on the Surface Integrity of AISI 1060 High Carbon Steel.” in 2nd CIRP Conference on Surface Integrity (CSI), 2014.
   Google Scholar
• Akkurt, A. 2011. “Comparison of Roller Burnishing and Other Methods of Finishing Treatment of the Surface of Openings in Parts from Tool Steel D3 for Cold Forming.” Metal Science and Heat Treatment 53 (3–4) (July): 145–150. doi:10.1007/s11041-011-9358-2).
   Web of Science ®Google Scholar
• Balland, P, L Tabourot, F Degre, and V. Moreau. 2013. “Mechanics of the Burnishing Process.” Precision Engineering 37 (1): 129–134. doi:10.1016/j.precisioneng.2012.07.008.
   Web of Science ®Google Scholar
• Bozdana, AT. 2005. “On the Mechanical Surface Enhancement Techniques in Aerospace Industry a Review of Technology.” Aircraft Engineering and Aerospace Technology 77 (4): 279–292. doi:10.1108/00022660510606349.
   Web of Science ®Google Scholar
• DeFisher, Randall Scott, II. 2014. “Investigation of Spherical Bearings for Use in the UltraForm Finishing Polishing Process.” Rochester Institute of Technology. https://scholarworks.rit.edu/theses/8498/
   Google Scholar
• Gharbi, F., S. Sghaier, K.J. Al-Fadhalah, T. Benameur, et al. 2011. “Effect of Ball Burnishing Process on the Surface Quality and Microstructure Properties of AISI 1010 Steel Plates.” Journal of Materials Engineering and Performance 20 (6): 903–910. doi:10.1007/s11665-010-9701-6.
   Web of Science ®Google Scholar
• Hamadache, H., Z. Zemouri, L. Laouar, and S. Dominiak. 2014. “Improvement of Surface Conditions of 36 Cr Ni Mo 6 Steel by Ball Burnishing Process.” Journal of Mechanical Science and Technology 28 (4): 1491–1498. doi:10.1007/s12206-014-0135-1.
   Web of Science ®Google Scholar
• Han, Kunpeng, L. Tan, C. Yao, D. Zhang, and Z. Zhou. 2022. “Studies on the Surface Characteristics of Ti60 Alloy Induced by Turning Combined with Ball Burnishing.” Journal of Manufacturing Processes 76 (76): 349–364. doi:10.1016/j.jmapro.2022.02.019.
   Google Scholar
• Harish, D. Shivalingappa, P. Vishnu, and s. Kumaran. “Impact of Ball Burnishing Process Parameters on Surface Integrity of an Aluminium 2024 Alloy.” in IOP Conference Series: Materials Science and Engineering, Mangalore, 2018.
   Google Scholar
• Harish, shivalingappa.D, N. Raghavendra, and N. Raghavendra. 2021. “The Impact of Low Plasticity Burnishing Process Parameters on Residual Stress and Percentage of Cold Working Distribution in Ti-6Al-4V Alloy.” Journal of Failure Analysis and Prevention 21 (2): 410–418. doi:10.1007/s11668-021-01113-x.
   Web of Science ®Google Scholar
• Harish, and D. Shivalingappa. “The Influence of Ball and Roller Burnishing Process Parameters on Surface Integrity of Al 2024 Alloy.” in Materials Today: Proceedings, Hyderabad, 2020.
   Google Scholar
• Hua, Z. Liu, J. Jiang, J. Jiang, and J. Jiang. 2019. “Residual Stress Regenerated on Low Plasticity Burnished Inconel 718 Surface after Initial Turning Process.” Journal of Manufacturing Science and Engineering 141 (12): 11. doi:10.1115/1.4045060.
   Web of Science ®Google Scholar
• Jawahir, IS, Z Pu, S Yang, et al. “Cryogenic Processing of Materials for Enhanced Product Life, Performance and Sustainability.” In: 15th International Conference on Advances in Materials and Processing Technologies, Wollongong, Australia, 2012.
   Google Scholar
• Lim, S. Castagne, C. C. Wong, and C. Cher Wong. 2016. “Effect of Deep Cold Rolling on Residual Stress Distributions between the Treated and Untreated Regions on Ti–6Al–4V Alloy.” Journal of Manufacturing Science and Engineering 138 (11): 8. doi:10.1115/1.4033524.
   Web of Science ®Google Scholar
• Liu, Q. Dai, V. Ji, V. Ji, V. Ji, and V. Ji. 2020. “Analytical Modeling and Experimental Verification of Surface Roughness in the ultrasonic-assisted Ball Burnishing of Shaft Targets.” The International Journal of Advanced Manufacturing Technology 107 (7–8): 3593–3613. doi:10.1007/s00170-020-05261-6.
   Web of Science ®Google Scholar
• Livatyali, E. Has, M. Türköz, and M. Türköz. 2020. “Prediction of Residual Stresses in Ball Burnishing TI6AL4V Thin Sheets.” The International Journal of Advanced Manufacturing Technology 110 (3): 1083–1093. doi:10.1007/s00170-020-05837-2.
   Web of Science ®Google Scholar
• Manouchehrifar, and K. Alasvand. 2012. “Simulation and Research on Deep Rolling Process Parameters.” International Journal Advanced Design and Manufacturing Technology 5 (5): 7.
   Google Scholar
• Mohammadi, F., R. Sedaghati, and A. Bonakdar. 2014. “Finite Element Analysis and Design Optimization of Low Plasticity Burnishing Process.” The International Journal of Advanced Manufacturing Technology 70 (5–8): 1337–1354. doi:10.1007/s00170-013-5406-y.
   Web of Science ®Google Scholar
• Mounira, Bourebia, H. Hamadache, L. Lakhdar, Z. Mentouri, D. Kamila, H. Tarek, and T. Ahlem. 2021. “Effect of Ball Burnishing Process on Mechanical Properties and Impact Behavior of S355JR Steel.” The International Journal of Advanced Manufacturing Technology 116 (3): 1373–1384. doi:10.1007/s00170-021-07454-z.
   Web of Science ®Google Scholar
• Nemat, M., and A.C. Lyons. 2000. “An Investigation of the Surface Topography of Ball Burnished Mild Steel and Aluminium.” International Journal of Advanced Manufacturing Technology (16): 469–473.
   Google Scholar
• Paul, S. Prevéy. “Overview Of Low Plasticity Burnishing For Mitigation Of Fatigue Damage Mechanisms.” in Proceedings of ICSP 9, Paris, Marne la Vallee, France, 2005.
   Google Scholar
• Prevéy, M. Shepard, and P. Smith. “The Effect of Low Plasticity Burnishing (LPB) on the HCF Performance and FOD Resistance of Ti-6Al-4V.” in 6th National Turbine Engine High Cycle Fatigue (HCF) Conference, Jacksonville, FL, 2001.
   Google Scholar
• Prevéy, PS, RA Ravindranath, M Shepard, and T Gabb. “Case Studies of Fatigue Life Improvement Using Low Plasticity Burnishing in Gas Turbine Engine Applications.” Proceedings of ASME Turbo Expo, 16–19 June 2003, Atlanta, Georgia, USA, 2003.
   Google Scholar
• Randjelovic, B. Tadic, P. M. Todorovic, C. Tsiafis, C. Tsiafis, C. Tsiafis, C. Tsiafis, and C. Tsiafis. 2015. “Modelling of the Ball Burnishing Process with a high-stiffness Tool.” The International Journal of Advanced Manufacturing Technology 81 (81): 1509–1518. doi:10.1007/s00170-015-7319-4.
   Google Scholar
• Sova, A., C. Courbon, F. Valiorgue, J. Rech, and P. Bertrand. 2017. “Effect of Turning and Ball Burnishing on the Microstructure and Residual Stress Distribution in Stainless Steel Cold Spray Deposits.” Journal of Thermal Spray Technology 26 (8): 1922–1934. doi:10.1007/s11666-017-0655-1.
   Web of Science ®Google Scholar
• Yuan, Y. Sun, C. Li, W. Liu, and W. Liu. 2017. “Experimental Investigation into the Effect of Low Plasticity Burnishing Parameters on the Surface Integrity of TA2.” The International Journal of Advanced Manufacturing Technology 88 (1–4): 1089–1099. doi:10.1007/s00170-016-8838-3.
   Web of Science ®Google Scholar
• Zhang, J. C. Outeiro, and T. Mabrouki. “On the Selection of Johnson-Cook Constitutive Model Parameters for Ti-6Al-4V Using Three Types of Numerical Models of Orthogonal Cutting.” in 15th CIRP Conference on Modelling of Machining Operations, 2015.
   Google Scholar
• Zhang, T, N Bugtai, and ID Marinescu. 2015. “Burnishing of Aerospace Alloy: A Theoretical- Experimental Approach.” Journal of Manufacturing Systems 37: 472–478. doi:10.1016/j.jmsy.2014.11.004.
   Web of Science ®Google Scholar
• Zhuang, Q. Liu, p. K. Sharp, p. K. Sharp, A. Paradowska, and A. Paradowska. 2014. “Deep Surface Rolling for Fatigue Life Enhancement of Laser Clad Aircraft Aluminium Alloy.” Applied Surface Science 320: 558–562. doi:10.1016/j.apsusc.2014.09.139.
   Web of Science ®Google Scholar