Investigation of the effect of height correction of metal-polymer helical gears teeth on contact pressures, wear and durability

References

• Alexandru, A.T. 2015. “Addendum Modification of Spur Gears with Equalized Efficiency at the Points Where the Meshing Stars and Ends.” Meccanica 21 (6): 480–485. doi:10.5755/j01.mech.21.6.12480.
   Google Scholar
• Baglioni, S., F. Cianetti, and L. Landi. 2012. “Influence of the Addendum Modification on Spur Gear Efficiency.” Mechanism and Machine Theory 49: 216–233. doi:10.1016/j.mechmachtheory.2011.10.007.
   Web of Science ®Google Scholar
• Bharat, G., C. Abhishek, and V.V. Gautam. 2012. “Contact Stress Analysis of Spur Gear.” International Journal of Engineering Research and Technology 1: 1–7.
   Google Scholar
• Bodzás, S. 2017. “Computer Aided Designing and Modelling of x-zero Gear Drive.” International Review of Applied Sciences and Engineering 8 (1): 93–97. doi:10.1556/1848.2017.8.1.13.
   Google Scholar
• Bodzás, S. 2019. “Analysis of the Effect of the Addendum Modification Coefficient for Contact Surfaces of Spur Gear.” Journal of Mechanical Engineering 69 (1): 5–16. doi:10.2478/scjme-2019-0001.
   Google Scholar
• Bonori, G., M. Barbieri, and F. Pellicano. 2008. “Optimum Profile Modifications of Spur Gears by Means of Genetic Algorithms.” Journal of Sound and Vibration 313: 603–616. doi:10.1016/j.jsv.2007.12.013.
   Web of Science ®Google Scholar
• Cathelin, J., E. Letzelter, M. Guingand, J-P. De Vaujany, and L. Chazeau. 2013. “Experimental and Numerical Study of a Loaded Cylindrical PA66 Gear.” Journal of Mechanical Design 135 (4): 89–98. doi:10.1115/1.4023634.
   Web of Science ®Google Scholar
• Chernets, M., M. Pashechko, and A. Nevchas. 2001. “Methods of Forecasting and Increasing the Wear Resistance of Tribotechnical Sliding Systems.” In 3 Volumes. Vol.1. Research and Calculation of Sliding Tribosystems, Methods To increase Durability and Wear Resistance, 492.Drogobich: KOLO.
   Google Scholar
• Chernets, M.V., J. Kelbinski, and R.Ja. Jarema. 2011. “Generalized Method for the Evaluation of Cylindrical Involute Gears.” Materials Science 47 (1): 45–51. doi:10.1007/s11003-011-9366-9.
   Web of Science ®Google Scholar
• Chernets, M.V., R.Ya. Yarema, and M. Chernets Yu. 2012. “A Method for the Evaluation of the Influence of Correction and Wear of the Teeth of A Cylindrical Gear on Its Durability and Strength. Part 1. Service Live and Wear.” Materials Science 48 (3): 289–300. doi:10.1007/s11003-012-9505-y.
   Web of Science ®Google Scholar
• Chernets, M.V., R.Ya. Yarema, and M. Chernets Yu. 2013. “A Method for the Evaluation of the Influence of Correction and Wear of the Teeth of A Cylindrical Gear on Its Durability and Strength. Part 2. Contact Strength.” Materials Science 6: 752–756. doi:10.1007/s11003-013-9565-7.
   Google Scholar
• Chernets, M.V., and M. Chernets Ju. 2016. “Evaluation of the Strength, Wear, and Durability of a Corrected Cylindrical Involute Gearing, with Due Regard for the Engagement Conditions.” Journal of Friction and Wear 37 (1): 71–77. doi:10.3103/S1068366616010050.
   Web of Science ®Google Scholar
• Chernets, M., and Ju. Chernets. 2017. “The Simulation of Influence of Engagement Conditions and Technological Teeth Correction on Contact Strength, Wear and Durability of Cylindrical Spur Gear of Electric Locomotive.” Proc. JMechE. Part J: Journal of Engineering Tribology 231 (1): 57–62. doi:10.1177/1350650116645024.
   Web of Science ®Google Scholar
• Chernets, M.V., and M. Chernets Yu. 2017. “A Technique for Calculating Tribotechnical Characteristics of Tractive Cylindrical Gear of VL10 Locomotive.” Journal of Friction and Wear 37 (6): 566–572. doi:10.3103/S1068366616060040.
   Google Scholar
• Chernets, M. 2019. “Method of Calculation of Tribotechnical Characteristics of the metal-polymer Gear, Reinforced with Glass Fiber, Taking into Account the Correction of Tooth.” Eksploatacja i Niezawodnosc – Maintenance and Reliability 21 (4): 546–552. doi:10.17531/ein.2019.4.2.
   Web of Science ®Google Scholar
• Czerniec, M., and A. Kornienko. 2020. “Prediction of the Service Life of Metal-Polymer Gears Made of Glass and Carbon Fibre-Reinforced Polyamide, considering the Impact of Height Correction.” Advances in Science and Technology Research Journal 14 (3): 15–21. doi:10.12913/22998624/124553.
   Web of Science ®Google Scholar
• Fuentes, A., R. Ruiz-Orzaez, and I. Gonzalez-Perez. 2014. “Computerized Design, Simulation of Meshing, and Finite Element Analysis of Two Types of Geometry of Curvilinear Cylindrical Gears.” Computer Methods Apply Mechanical Engineering 272: 321–339. doi:10.1016/j.cma.2013.12.017.
   Web of Science ®Google Scholar
• Gonzalez-Perez, I., V. Roda-Casanova, and A. Fuentes. 2015. “Modified Geometry of Spur Gear Drives of Compensation of Shaft Deflections.” Meccanica 50: 1855–1867. doi:10.1007/s11012-015-0129-9.
   Web of Science ®Google Scholar
• Hooke, C.J., S.N. Kukureka, P. Liao, M. Rao, and Y.K. Chen. 1996. “The Friction and Wear of Polymers in Non-Conformal Contacts.” Wear 200: 83–94. doi:10.1016/S0043-1648(96)07270-5.
   Web of Science ®Google Scholar
• Kahraman, A., P. Bajpai, and N.Е. Anderson. 2005. “Influence of Tooth Profile Deviations on Helical Gear Wear.” Journal of Mechanical Design 127 (4): 656–663. doi:10.1115/1.1899688.
   Web of Science ®Google Scholar
• Keresztes, R., and G. Kalacska. 2008. “Friction of Polymer/Steel Gear Pairs.” Plastics and Rubber 45: 236–242.
   Google Scholar
• Miler, D., A. Loncar, D. Žeželj, and Z. Domitran. 2017. “Influence of Profile Shift on the Spur Gear Pair Optimization.” Mechanism and Machine Theory 117: 189–197. doi:10.1016/j.mechmachtheory.2017.07.001.
   Web of Science ®Google Scholar
• Pasta, A., and G. Mariotti Virzi. 2007. “Finite Element Method Analysis of a Spur Gear with a Corrected Profile.” The Journal of Strain Analysis for Engineering Design 42: 281–292. doi:10.1243/03093247JSA284.
   Web of Science ®Google Scholar
• S.V, Shil’ko, and Starzhinskii V.E. 1993. “Prediction of Wear Resistance of Gearing with Wheels Made of Reinforced Composites.” Journal of Friction and Wear 14 (3): 7–13.
   Google Scholar
• Sajad, H.D, A. Vivek, J.K Mohammad, and M. Arunish. 2015. “Investigation of Bending Stress on a Spur Gear Tooth at Design Stage by Finite Element Modelling.” International Journal on Mechanical Engineering and Robotics 3: 13–18.
   Google Scholar
• Shil’ko, S.V, V.E Starzhinsky, E.M Petrokovets, and D.A. Chernous. 2013. “Two-Level Calculation Method for Tribojoints Made of Disperse-Reinforced Composites: Part 1.” Journal of Friction and Wear 34 (1): 65–69. doi:10.3103/S1068366613010133.
   Web of Science ®Google Scholar
• Sukumaran, J., M. Ando, P. De Baets, V. Rodriguez, L. Szabadi, G. Kalacska, and V. Paepegem. 2012. “Modelling Gear Contact with twin-disc Setup.” Tribology International 49: 1–7. doi:10.1016/j.triboint.2011.12.007.
   Web of Science ®Google Scholar
• Sushil Kumar, T., and J. Upendra Kumar. 2012. “Stress Analysis of Mating Involute Spur Gear Teeth.” International Journal of Engineering Research and Technology 1: 1–12.
   Google Scholar
• Thoan, P.V., G.L. Wen, H.F. Yin, and N.V. Sy. 2014. “Choosing the Optimal Addendum Modification Coefficient of External Involute Spur Gear.” Australian Journal of Mechanical Engineering 13 (3): 145–153. doi:10.1080/14484846.2015.1093209.
   Google Scholar
• Yang, Y., J. Wang, Q. Zhou, Y. Huang, J. Zhu, and W. Yang. 2018. “Mesh Stiffness Modelling considering Actual Tooth Profile Geometry for a Spur Gear Pair.” Mechanics and Industry 19 (306): 1–14. https://ui.adsabs.harvard.edu/link_gateway/2018MeInd.19.306Y/doi:10.1051/meca/2018026.
   Google Scholar
• Yu, W., C.K. Mechefske, and M. Timusk. 2017. “Influence of the Addendum Modification on Spur Gear back-side Mesh Stiffness and Dynamics.” Journal of Sound and Vibration 389: 183–201. doi:10.1016/j.jsv.2016.11.030.
   Web of Science ®Google Scholar
• Zwolak, J., and Martyna М. 2011. “Analiza naprężeń kontaktowych i naprężeń zginających występujących w przekładniach zębatych power shift.” Tribologia 42 (3): 155–165.
   Google Scholar
• Zwolak, J., and M. Wittek. 2011. “Optymalizacja parametrów geometrycznych kół zębatych w aspekcie minimalizacji naprężeń kontaktowych.” Tribologia 45 (6): 283–291.
   Google Scholar