Study of the tribological performance of pre- and post-heat treatment of AISI D2 steel with AlCrN coating under wet conditions

References

• Aihua, L., D. Jianxin, C. Haibing, C. Yangyang, and Z. Jun. 2012. “Friction and Wear Properties of TiN, TiAln, AlTin and CrAln PVD Nitride Coatings.” International Journal of Refractory Metals & Hard Materials 31: 82–88. doi:10.1016/j.ijrmhm.2011.09.010.
   Web of Science ®Google Scholar
• Banakh, O., PE. Schmid, R. Sanjines, and F. Levy. 2003. “High Temperature Oxidation Resistance of Cr 1-X Al X N Thin Films Deposited by Reactive Magnetron Sputtering.” Surface & Coatings Technology 163: 57–61. doi:10.1016/S0257-8972(02)00589-3.
   Web of Science ®Google Scholar
• Cadena, NL., R. Cue-Sampedro, HR. Siller, AM. Arizmendi-Morquecho, CI. Rivera-Solorio, and S. Di-Nardo. 2013. “Study of PVD AlCrn Coating for Reducing Carbide Cutting Tool Deterioration in the Machining of Titanium Alloys.” Materials 6 (6): 2143–2154. doi:10.3390/ma6062143.
   PubMed Web of Science ®Google Scholar
• Chang, Yin-Yu, and Siddhant Amrutwar. 2019. “Effect of Plasma Nitriding Pretreatment on the Mechanical Properties of AlCrsin-Coated Tool Steels.” Materials 12 (5): 795. doi:10.3390/ma12050795.
   PubMed Web of Science ®Google Scholar
• Cho, IS., A. Amanov, and JD. Kim. 2015. “The Effects of AlCrn Coating, Surface Modification and Their Combination on the Tribological Properties of High Speed Steel Under Dry Conditions.” Tribology International 81: 61–72. doi:10.1016/j.triboint.2014.08.003.
   Web of Science ®Google Scholar
• Chowdhury, MA., and DM. Nuruzzaman. 2013. “Experimental Investigation on Friction and Wear Properties of Different Steel Materials.” Tribology in Industry 35 (1): 42–50. doi:10.4018/ijseims.2013010103.
   Google Scholar
• Endrino, JL., GS. Fox-Rabinovich, and C. Gey. 2006. “Hard AlTin, AlCrn PVD Coatings for Machining of Austenitic Stainless Steel.” Surface & Coatings Technology 200 (24): 6840–6845. doi:10.1016/j.surfcoat.2005.10.030.
   Web of Science ®Google Scholar
• Endrino, JL., GS. Fox-Rabinovich, A. Reiter, SV. Veldhuis, RE. Galindo, JM. Albella, and JF. Marco. 2007. “Oxidation Tuning in AlCrn Coatings.” Surface & Coatings Technology 201 (8): 4505–4511. doi:10.1016/j.surfcoat.2006.09.089.
   Web of Science ®Google Scholar
• Fox-Rabinovich, GS., BD. Beake, JL. Endrino, SC. Veldhuis, R. Parkinson, LS. Shuster, and MS. Migranov. 2006. “Effect of Mechanical Properties Measured at Room and Elevated Temperatures on the Wear Resistance of Cutting Tools with TiAln and AlCrn Coatings.” Surface & Coatings Technology 200 (20): 5738–5742. doi:10.1016/j.surfcoat.2005.08.132.
   Web of Science ®Google Scholar
• Hao, Du, Qi Jianzhong, Yuanxia Lao, and Tianying Xiong. 2012. “Oil Retaining Capability and Sliding Friction Behaviour of Porous Copper with Elongated Cylindrical Pores.” Journal of Materials Processing Technology 212 (8): 1796–1801. doi:10.1016/j.jmatprotec.2012.03.024.
   Web of Science ®Google Scholar
• Hariningsih, H., L. Lutiyatmi, and T. Daryanto. 2022. “Effects of Heat Treatment on Microstructure and Hardness of D2 Tools.” Applied Research and Smart Technology (ARSTech) 3 (1): 31–40. doi:10.23917/arstech.v3i1.761.
   Google Scholar
• Ilaiyavel, S., and A. Venkatesan. 2012. “Experimental Investigation of Wear Characteristics on Manganese Phosphate Coated AISI D2 Steel.” International Journal of Precision Engineering and Manufacturing 13 (4): 581–586. doi:10.1007/s12541-012-0074-7.
   Web of Science ®Google Scholar
• Kalss, W., A. Reiter, V. Derflinger, C. Gey, and JL. Endrino. 2006. “Modern Coatings in High Performance Cutting Applications.” International Journal of Refractory Metals & Hard Materials 24 (5): 399–404. doi:10.1016/j.ijrmhm.2005.11.005.
   Web of Science ®Google Scholar
• Karakaş, M.S. 2020. “Tribocorrosion Behavior of Surface-Modified AISI D2 Steel.” Surface & Coatings Technology 394: 125884. doi:10.1016/j.surfcoat.2020.125884.
   Web of Science ®Google Scholar
• Kawate, M., AK. Hashimoto, and T. Suzuki. 2003. “Oxidation Resistance of Cr 1-X Al X N and Ti 1- X Al X N Films.” Surface & Coatings Technology 165 (2): 163–167. doi:10.1016/S0257-8972(02)00473-5.
   Web of Science ®Google Scholar
• Khawarizmi, R. M., Y. Guo, T. R. Bieler, & P. Kwon. 2022, June. A Machinability Study of Coated Inserts for Turning Ti-6al-4V. In International Manufacturing Science and Engineering Conference (Vol. 85819, p. V002T05A053). American Society of Mechanical Engineers.
   Google Scholar
• Khlifi, K., H. Dhiflaoui, C. Ben Aissa, N. Barhoumi, and A. Ben Cheikh Larbi. 2022. “Friction and Wear Behavior of a Physical Vapor Deposition Coating Studied Using a Micro-Scratch Technique.” Journal of Engineering Materials and Technology 144 (2). doi:10.1115/1.4052239.
   Web of Science ®Google Scholar
• Kumar, J. K., T. B. Rao, and K. R. Krishna. 2022. “The Microstructural Properties and Tribological Performance of Al2o3 and TiN Nanoparticles Reinforced Ti–6al–4V Composite Coating Deposited on AISI304 Steel by TIG Cladding.” Journal of Tribology 145 (1): 011401. doi:10.1115/1.4055488.
   Web of Science ®Google Scholar
• Kuti, R., Á. I. Szabó, and Á. D. Tóth. 2022. “Experimental Investigation of Tribological Properties of Two Fully Formulated Engine Oils with Additional Nanoscale Spherical Zirconia Particles.” Lubricants 10 (10): 246. doi:10.3390/lubricants10100246.
   Web of Science ®Google Scholar
• Liew, WYH., JLL. Jie, LY. Yan, J. Dayou, CS. Sipaut, and MFB. Madlan. 2013. “Frictional and Wear Behaviour of AlCrn, TiN, TiAln Single layer Coatings, and TiAln/AlCrn, AlN/TiN Nano-Multilayer Coatings in Dry Sliding.” Procedia Engineering 68: 512–517. doi:10.1016/j.proeng.2013.12.214.
   Google Scholar
• Lin, Y.J., A. Agrawal, and Y. Fang. 2008. “Wear Progressions and Tool Life Enhancement with AlCrn Coated Inserts in High-Speed Dry and Wet Steel Lathing.” Wear 264 (3–4): 226–234. doi:10.1016/j.wear.2007.03.007.
   Web of Science ®Google Scholar
• Lin, Yueh-Jaw, Ashutosh Agrawal, and Yunmei Fang. 2008. “Wear Progressions and Tool Life Enhancement with AlCrn Coated Inserts in High-Speed Dry and Wet Steel Lathing.” Wear 264 (3): 226–234. doi:10.1016/j.wear.2007.03.007.
   Web of Science ®Google Scholar
• Lin, Y.W., P.C. Chih, and J.H. Huang. 2020. “Effect of Ti Interlayer Thickness on Mechanical Properties and Wear Resistance of TiZrn Coatings on AISI D2 Steel.” Surface & Coatings Technology 394: 125690. doi:10.1016/j.surfcoat.2020.125690.
   Web of Science ®Google Scholar
• Lin, J., JJ. Moore, J. Wang, and WD. Sproul. 2011. “High Temperature Oxidation Behavior of CrN/AlN Super Lattice Films.” Thin Solid Films 519 (8): 2402–2408. doi:10.1016/j.tsf.2010.11.042.
   Web of Science ®Google Scholar
• Li, Y., K. Sun, P. Liu, Y. Liu, and P. Chui. 2014. “Surface Nanocrystallization Induced by Fast Multiple Rotation Rolling on Ti-6al-4V and Its Effect on Microstructure and Properties.” Vacuum 101: 102–106. doi:10.1016/j.vacuum.2013.07.028.
   Web of Science ®Google Scholar
• Li, W., L. Zhang, C. Wu, Z. Cui, and C. Niu. 2022. “Influence of Tool and Workpiece Properties on the Wear of the Counterparts in Contact Sliding.” Journal of Tribology 144 (2). doi:10.1115/1.4050902.
   Web of Science ®Google Scholar
• Matsuno, T., K. Nakagiri, T. Matsuda, T. Tanaka, T. Yasutomi, H. Shoji, and M. Ohata. 2022. “Identification of Ductile Fracture Design Curve for Hardened Quasi-Brittle AISI-D2 Tool Steel to Predict Shearing Tool Failure.” Journal of Materials Processing Technology 307: 117680. doi:10.1016/j.jmatprotec.2022.117680.
   Web of Science ®Google Scholar
• Mo, JL., and MH. Zhu. 2008. “Sliding Tribological Behavior of AlCrn Coating.” Tribology International 41 (12): 1161–1168. doi:10.1016/j.triboint.2008.02.007.
   Web of Science ®Google Scholar
• Omar, S. M. T., and K. P. Plucknett. 2022. “The Influence of DED Process Parameters and Heat-Treatment Cycle on the Microstructure and Hardness of AISI D2 Tool Steel.” Journal of Manufacturing Processes 81: 655–671. doi:10.1016/j.jmapro.2022.06.069.
   Web of Science ®Google Scholar
• Polcar, T., T. Kubart, R. Novák, L. Kopecký, and P. Široký. 2005. “Comparison of Tribological Behaviour of TiN, TiCn and CrN at Elevated Temperatures.” Surface & Coatings Technology 193 (1): 192–199. doi:10.1016/j.surfcoat.2004.07.098.
   Web of Science ®Google Scholar
• Pownraj, C., and A. V. Arasu. 2022. “A Comprehensive Investigation on Wear and Thermo-Physical Properties of Bio-Char/sae20w40 Nanolubricant.” Biomass Conversion and Biorefinery 1–17. doi:10.1007/s13399-021-02157-7.
   Web of Science ®Google Scholar
• Prabakaran, V., S. Ilaiyavel, P. SureshPrabhu, and S.S. Thambu. 2017. Wear Characteristics of AlCrN Coating on AISI 410 Steel by the Ball-Cratering Test Method. doi:10.1108/ILT-05-2016-0107.
   Google Scholar
• Reiter, AE., VH. Derflinger, B. Hanselmann, T. Bachmann, and B. Sartory. 2005. “Investigation of the Properties of Al 1-X Cr X N Coatings Prepared by Cathodic Arc Evaporation.” Surface & Coatings Technology 200 (7): 2114–2122. doi:10.1016/j.surfcoat.2005.01.043.
   Web of Science ®Google Scholar
• Singh, K., R.K. Khatirkar, and S.G. Sapate. 2015. “Microstructure Evolution and Abrasive Wear Behavior of D2 Steel.” Wear 328: 206–216. doi:10.1016/j.wear.2015.02.019.
   Web of Science ®Google Scholar
• Tasneem, H. A., K. P. Ravikumar, and H. V. Ramakrishna. 2022. “Performance and Wear Debris Characteristics of Karanja Biodiesel and Biolubricant as a Substitute in a Compression Ignition Engine.” Fuel 319: 123870. doi:10.1016/j.fuel.2022.123870.
   Web of Science ®Google Scholar
• Vijayasarathi, P., S. Ilaiyavel, and P. Suresh Prabhu. 2017. “Evaluation of Sliding Wear Resistance of Physical Vapor Deposited Coatings by the Ball-Cratering Test Method.” Journal of Engineering Materials and Technology 139 (3): 031009. doi:10.1115/1.4036067.
   Web of Science ®Google Scholar
• Wang, Q., F. Zhou, C. Wang, MF. Yuen, M. Wang, T. Qian, M. Matsumoto, and J. Yan. 2015. “Comparison of Tribological and Electrochemical Properties of TiN, CrN, TiAln and aC: H Coatings in Simulated Body Fluid.” Materials Chemistry and Physics 158: 74–81. doi:10.1016/j.matchemphys.2015.03.039.
   Web of Science ®Google Scholar