Rheological, permanent deformation and fatigue analysis for calibration of the recovery process of bitumens in the rotary evaporator

References

• Abuhassan, Y., Alin, M., Lqbal, T., Nazzal, M., Asce, M., & Abbas, A. R. (2019). Effect of extraction solvents on rheological properties of recovered asphalt binders. Journal of Transportation Engineering, Part B: Pavements, 145(1). https://doi.org/10.1061/JPEODX.0000096
   Web of Science ®Google Scholar
• Airey, G. D. (2003). State of the art report on ageing test methods for bituminous pavement materials. International Journal of Pavement Engineering, 4(3), 165–176. https://doi.org/10.1080/1029843042000198568
   Google Scholar
• Ali, A. W., Mehta, Y. A., Nolan, A., Purdy, C., & Bennert, T. (2016). Investigation of the impacts of aging and RAP percentages on effectiveness of asphalt binder rejuvenators. Construction and Building Materials, 110, 211–217. https://doi.org/10.1016/j.conbuildmat.2016.02.013
   Web of Science ®Google Scholar
• Almeida, P. O., Boeira, F. D., Specht, L. P., Cervo, T. C., Pereira, D. d. S., Centofante, R., Barboza, V. d. S., & Correia e Silva, C. F. (2018). Avaliação laboratorial do tipo e teor de ligante e da granulometria na deformação permanente de misturas asfálticas. TRANSPORTES, 26(2), 1–15. https://doi.org/10.14295/transportes.v26i2.1407
   Google Scholar
• American Association of State Highway and Transportation Officials (AASHTO M 320-17). (2017). Standard specification for performance-graded asphalt binder.
   Google Scholar
• American Association of State Highway and Transportation Officials (AASHTO M 332-19). (2019). Standard specification for performance-graded asphalt binder using multiple stress creep recovery (MSCR) test.
   Google Scholar
• American Association of State Highway and Transportation Officials (AASHTO T 315-20). (2020). Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR).
   Google Scholar
• American Society for Testing Materials (ASTM D 2172). (2017). Standard test methods for quantitative extraction of asphalt binder from asphalt mixtures.
   Google Scholar
• American Society for Testing Materials (ASTM D 2726). (2019). Standard test method for bulk specific gravity and density of Non-absorptive compacted asphalt mixtures.
   Google Scholar
• American Society for Testing Materials (ASTM D 2872). (2019). Standard test method for effect of heat and Air on a moving film of asphalt (rolling thin-film oven test).
   Google Scholar
• American Society for Testing Materials (ASTM D 5404). (2017). Standard practice for recovery of asphalt from solution using the rotary evaporator.
   Google Scholar
• American Society for Testing Materials (ASTM D 7405). (2020). Standard test method for multiple stress creep and recovery (MSCR) of asphalt binder using a dynamic shear rheometer.
   Google Scholar
• Associação Brasileira de Normas Técnicas (ABNT NBR 6560). (2016). Associação Brasileira de Normas Técnicas, 2016. ABNT NBR 6560 – Ligantes asfálticos – determinação do ponto de amolecimento – método do anel e bola. Associação Brasileira de Normas Técnicas.
   Google Scholar
• Babadopulos, L. F. A., Soares, J. B., Ferreira, J. L. S., & Nascimento, L. A. H. (2018). Fatigue cracking simulation of aged asphalt pavements using a viscoelastic continuum damage model. Road Materials and Pavement Design, 19(3), 546–560. https://doi.org/10.1080/14680629.2018.1418715
   Web of Science ®Google Scholar
• Behnood, A. (2019). Application of rejuvenators to improve the rheological and mechanical properties of asphalt binders and mixtures: A review. Journal of Cleaner Production, 231, 171–182. https://doi.org/10.1016/j.jclepro.2019.05.209
   Web of Science ®Google Scholar
• Behnood, A., & Gharehveran, M. M. (2019). Morphology,: rheology, and physical properties of polymer-modified asphalt binders. European Polymer Journal, 112, 766–791. https://doi.org/10.1016/j.eurpolymj.2018.10.049
   Web of Science ®Google Scholar
• Blanc, J., Hornych, P., Sotoodeh-Nia, Z., Williams, C., Porot, L., Pouget, S., Boysen, R., Planche, J. P., Lo Presti, D., Jimenez, A., & Chailleux, E. (2019). Full-scale validation of bio-recycled asphalt mixtures for road pavements. Journal of Cleaner Production, 227, 1068–1078. https://doi.org/10.1016/j.jclepro.2019.04.273
   Web of Science ®Google Scholar
• Bowers, B. F., Moore, J., Huang, B., He, Q., Shu, X., Jia, X., & Miller, B. C. (2014). Investigation of sequential dissolution of asphalt binder in common solvents by FTIR and binder fractionation. Journal of Materials in Civil Engineering, 27, 8. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001198
   Web of Science ®Google Scholar
• Brondani, C., Menezes Vestena, P., Faccin, C., Lisboa Schuster, S., Pivoto Specht, L., & da Silva Pereira, D. (2022). Moisture susceptibility of asphalt mixtures: 2S2P1D rheological model approach and new index based on dynamic modulus master curve changes. Construction and Building Materials, 331, 127316. https://doi.org/10.1016/j.conbuildmat.2022.127316
   Web of Science ®Google Scholar
• BS EN 12697-3. (2018). Bituminous mixtures. Test methods. Bitumen recovery: Rotary evaporator.
   Google Scholar
• Burr, B. L., Davison, R. R., Glover, C. J., & Bullin, J. A. (1990). Solvent removal from asphalt. Transportation Research Record, (1269), 1–8.
   Google Scholar
• Burr, B. L., Davison, R. R., Jemison, H. B., Glover, C. J., & Bullin, J. A. (1991). Asphalt hardening in extraction solvents. Transportation Research Record, (1323), 1–8.
   Google Scholar
• Cao, W., Mohammad, L. N., & Elseifi, M. (2017). Assessing the effects of RAP. RAS, and warm-mix technologies on fatigue performance of asphalt mixtures and pavements using viscoelastic continuum damage approach. Road Materials and Pavement Design, 18(sup4: Papers from the 92nd Association of Asphalt Paving Technologists' Annual Meeting), 53–371. https://doi.org/10.1080/14680629.2017.1389078.
   Google Scholar
• Cao, W., & Wang, C. (2018). A new comprehensive analysis framework for fatigue characterization of asphalt binder using the linear amplitude sweep test. Construction and Building Materials, 171, 1–12. https://doi.org/10.1016/j.conbuildmat.2018.03.125
   Web of Science ®Google Scholar
• Cao, W., & Wang, C. (2019). Fatigue performance characterization and prediction of asphalt binders using the linear amplitude sweep based viscoelastic continuum damage approach. International Journal of Fatigue, 119, 112–125. https://doi.org/10.1016/j.ijfatigue.2018.09.028
   Web of Science ®Google Scholar
• Cao, W., Wang, Y., & Wang, C. (2019). Fatigue characterization of bio-modified asphalt binders under various laboratory aging conditions. Construction and Building Materials, 208, 686–696. https://doi.org/10.1016/j.conbuildmat.2019.03.069
   Web of Science ®Google Scholar
• Cavalli, M. C., Zaumanis, M., Mazza, E., Partl, M. N., & Poulikakos, L. D. (2019). Aging effect on rheology and cracking behaviour of reclaimed binder with bio-based rejuvenators. Journal of Cleaner Production, 189, 88–97. https://doi.org/10.1016/j.jclepro.2018.03.305
   Web of Science ®Google Scholar
• Di Benedetto, H., Olard, F., Sauzéat, C., & Delaporte, B. (2004). Linear viscoelastic behaviour of bituminous materials: From binders to mixes. Road Materials Pavement Design, 163–202. https://doi.org/10.1080/14680629.2004.9689992
   Google Scholar
• Diefenderfer, S. D. (2014). Developing a laboratory protocol for asphalt binder recovery (Report No. FHWA/VCRIR 15-R7). Virginia Center for Transportation Innovation and Research.
   Google Scholar
• DNER ME 382. (1999). Material asfáltico – Determinação da recuperação elástica de materiais asfálticos modificados por polímero, pelo método do ductilômetro.
   Google Scholar
• DNIT ME 136. (2018). Misturas asfálticas – Determinação da resistência à tração por compressão diametral.
   Google Scholar
• DNIT ME 155. (2010). Material asfáltico – Determinação da penetração – Método de ensaio.
   Google Scholar
• Elwardany, M. D., Rad, F. Y., Castorena, C., & Kim, R. Y. (2016). Evaluation of asphalt mixture laboratory long-term ageing methods for performance testing and prediction. Road Materials and Pavement Design, 18(1). https://doi.org/10.1080/14680629.2016.1266740
   Google Scholar
• Ge, D., You, Z., Chen, S., Liu, C., Gao, J., & Lv, S. (2019). The performance of asphalt binder with trichloroethylene: Improving the efficiency of using reclaimed asphalt pavement. Journal of Cleaner Production, 232, 205–212. https://doi.org/10.1016/j.jclepro.2019.05.164
   Web of Science ®Google Scholar
• Guduru, G., Goli, A. K., Matolia, S., & Kuna, K. K. (2021). Chemical and performance characteristics of rejuvenated bituminous materials with high reclaimed asphalt content. Journal of Materials in Civil Engineering, 33(1), 1. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003540
   Web of Science ®Google Scholar
• Guduru, G., Tavva, T. L., & Kuna, K. (2022). Estimation of reclaimed asphalt pavement (RAP) characteristics using simple indicative tests. Road Materials and Pavement Design, (4), 1–27. https://doi.org/10.1080/14680629.2020.1845785.
   Web of Science ®Google Scholar
• Hospodka, M., Hofko, B., & Blab, R. (2017). Impact of distillation temperature on the solvent residue and viscoelastic properties of asphalt binders. Road Materials and Pavement Design, 19(6), 1275–1287. https://doi.org/10.1080/14680629.2017.1304234
   Web of Science ®Google Scholar
• Hossain, Z., Roy, S., & Rashid, F. (2020). Microscopic examination of rejuvenated binders with high reclaimed asphalts. Construction and Building Materials, 257. https://doi.org/10.1016/j.conbuildmat.2020.119490
   Web of Science ®Google Scholar
• Hossain, Z., Solanki, P., Zaman, M., Adje, D., & Lewis, S. (2012). Test methods for use of recycled asphalt pavement in asphalt mixes, College of Engineering (Report No. FHWA-OK-12-01). University of Oklahoma, OK.
   Google Scholar
• Hu, J., Wu, S., Liu, Q., Hernández, M. I. G., Wang, Z., Nie, G., & Zhang, G. (2018). Effect of ultraviolet radiation in different wavebands on bitumen. Construction and Building Materials, 159, 479–485. https://doi.org/10.1016/j.conbuildmat.2017.10.117
   Web of Science ®Google Scholar
• Im, S., Karki, P., & Zhou, F. (2016). Development of new mix design method for asphalt mixtures containing RAP and rejuvenators. Construction and Building Materials, 115, 727–734. https://doi.org/10.1016/j.conbuildmat.2016.04.081
   Web of Science ®Google Scholar
• Jing, R., Varveri, A., Liu, X., Scarpas, A., & Erkens, S. (2020). Rheological,: fatigue and relaxation properties of aged bitumen. International Journal of Pavement Engineering, 21(8), 1024–1033. https://doi.org/10.1080/10298436.2019.1654609
   Web of Science ®Google Scholar
• Kaloush, K. E., Shane Underwood, B., Salim, R., & Gundla, A. (2019). Evaluation of MSCR testing for adoption in ADOT asphalt binder specifications. SPR, 742. Arizona Department of Transportation.
   Google Scholar
• Lesueur, D. (2009). The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification. Advances in Colloid and Interface Science, 145(1-2). https://doi.org/10.1016/j.cis.2008.08.011
   PubMed Web of Science ®Google Scholar
• Mangiafico, S., Sauzéat, C., Di Benedetto, H., Pouget, S., Olard, F., & Planque, L. (2017). Complex modulus and fatigue performances of bituminous mixtures with reclaimed asphalt pavement and a recycling agent of vegetable origin. Road Materials and Pavement Design, 18(2), 315–330. https://doi.org/10.1080/14680629.2016.1213509
   Web of Science ®Google Scholar
• Manke, N. D., Williams, C. R., Sotoodeh-Nia, Z., Cochran, E. W., Porot, L., Chailleux, E., Pouget, S., Olard, F., Carrion, A. J. D. B., Planche, J., & Lo Presti, D. (2021). Performance of a sustainable asphalt mix incorporating high RAP content and novel bio-derived binder. Road Materials and Pavement Design, 22(4). https://doi.org/10.1080/14680629.2019.1643769
   Web of Science ®Google Scholar
• McDaniel, R. S., Soleymani, H., Anderson, R. M., Turner, P., & Peterson, R. (2000). Recommended use of reclaimed asphalt pavement in the superpave mix design method (Report No. D, 9–12). National Cooperative Highway Research Program.
   Google Scholar
• Mikhailenko, P., Ataeian, P., & Baaj, H. (2020). Extraction and recovery of asphalt binder: A literature review. International Journal of Pavement Research and Technology, 13(1), 20–31. https://doi.org/10.1007/s42947-019-0081-5
   Google Scholar
• Mikhailenko, P., & Baaj, H. (2017). Survey of current asphalt binder extraction and recovery practices [Paper presentation]. 2017 transportation Association of Canada Conference. Canada.
   Google Scholar
• Mikhailenko, P., Webber, G., & Baaj, H. (2021). Evaluation of solvents for asphalt extraction. Road Materials and Pavement Design, 22(5), 1195–1206. https://doi.org/10.1080/14680629.2019.1661277
   Web of Science ®Google Scholar
• Moreno-Navarro, F., Sol-Sánchez, M., García-Travé, G., & Rubio-Gámez, C. (2018). Fatigue cracking in asphalt mixtures: The effects of ageing and temperature. Road Materials and Pavement Design, 19(3), 561–570. https://doi.org/10.1080/14680629.2018.1418717
   Web of Science ®Google Scholar
• Nayak, P., & Sahoo, U. C. (2017). A rheological study on aged binder rejuvenated with pongamia oil and composite castor oil. International Journal of Pavement Engineering, 18(2), 595–607. https://doi.org/10.1080/10298436.2015.1103851
   Google Scholar
• Nie, F., He, D., Guan, J., Xueqiang, L., Hong, Y., Wang, L., Zheng, H., & Zhang, Q. (2018). Oil sand pyrolysis: Evolution of volatiles and contributions from mineral,: bitumen, maltene, and SARA fractions. Fuel, 224, 726–739. https://doi.org/10.1016/j.fuel.2018.03.069
   Web of Science ®Google Scholar
• Norouzi, A., Kim, R., Kim, S. S., & Yanh, J. (2017). Effect of reclaimed asphalt pavement content and binder grade on fatigue-resisting performance of asphalt mixtures in Georgia. Journal of Materials in Civil Engineering, 29(9), 9. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001960
   Web of Science ®Google Scholar
• Norouzi, A., & Kim, R. Y. (2017). Mechanistic evaluation of fatigue cracking in asphalt pavements. International Journal of Pavement Engineering, 18(6), 530–546. https://doi.org/10.1080/10298436.2015.1095909
   Web of Science ®Google Scholar
• Nosler, I., Tanghe, T., & Soenen, H. (2008). Evaluation of binder recovery methods and the influence on the properties of polymer modified bitumen. In 4th Eurasphalt and Eurobitume Congress, Belgium.
   Google Scholar
• Peterson, R. L., Soleymani, H. R., Anderson, R. M., & McDaniel, R. S. (2000). Recovery and testing of RAP binders from recycled asphalt pavements. Association of Asphalt Paving Technologists Proceedings, 69, 72–91.
   Google Scholar
• Pires, D. M., Schuster, S. L., Specht, L. P., da Silva Pereira, D., & Biancardo, S. A. (2022). Study of the permanent deformation of asphalt mixtures in the field: A multiscale approach. Construction and Building Materials, 325, 126763. https://doi.org/10.1016/j.conbuildmat.2022.126763
   Web of Science ®Google Scholar
• Pires, G. M., Lo Presti, D., & Airey, G. D. (2021). A practical approach to estimate the degree of binder activity of reclaimed asphalt materials. Road Materials and Pavement Design, 22(5), 1093–1116. http://doi.org/10.1080/14680629.2019.1663244
   Web of Science ®Google Scholar
• Qian, Y., Guo, F., Leng, Z., Zhang, Y., & Yu, Z. (2020). Simulation of the field aging of asphalt binders in different reclaimed asphalt pavement (RAP) materials in Hong Kong through laboratory tests. Construction and Building Materials, 265. https://doi.org/10.1016/j.conbuildmat.2020.120651
   Web of Science ®Google Scholar
• Rad, F. Y., Elwardany, M. D., Castorena, C., & Kim, R. Y. (2017). Investigation of proper long-term laboratory aging temperature for performance testing of asphalt concrete. Construction and Building Materials, 147, 616–629. https://doi.org/10.1016/j.conbuildmat.2017.04.197
   Web of Science ®Google Scholar
• Rahbar-Rastegar, R., Zhang, R., Sias, J. E., & Dave, E. V. (2019). Evaluation of laboratory ageing procedures on cracking performance of asphalt mixtures. Road Materials and Pavement Design, 20(sup2), S647–S662. https://doi.org/10.1080/14680629.2019.1633782
   Web of Science ®Google Scholar
• Rodezno, C., & Julian, G. (2018). Asphalt binder extraction protocol for determining amount & PG characteristics of binders recovered from asphalt mixtures (Report No. WHRP 0092-16-02). National Center for Asphalt Technology at Auburn University.
   Google Scholar
• Roja, K. L., Masad, E., & Mogawer, W. (2020). Performance and blending evaluation of asphalt mixtures containing reclaimed asphalt pavement. Road Materials and Pavement Design, https://doi.org/10.1080/14680629.2020.1764858
   Google Scholar
• Safaei, F. (2017). Characterization and modeling of asphalt binder fatigue [Doctoral dissertation]. North Carolina State University, North Carolina.
   Google Scholar
• Safaei, F., & Castorena, C. (2016). Temperature effects of linear amplitude sweep testing and analysis. Transportation Research Record: Journal of the Transportation Research Record, 2574(1), 1. https://doi.org/10.3141/2574-01
   Google Scholar
• Safaei, F., Castorena, C., & Kim, Y. R. (2016). Linking asphalt binder fatigue to asphalt mixture fatigue performance using viscoelastic continuum damage modeling. Mechanics of Time-Dependent Materials, 20(3), 299–323. https://doi.org/10.1007/s11043-016-9304-1
   Web of Science ®Google Scholar
• Safi, F. R., Al-Qadi, A. L., Hossain, K., & Ozer, H. (2019). Total recycled asphalt mixes: Characteristics and field performance. Transportation Research Board, 2673(12), 149–162. https://doi.org/10.1177/0361198119849915
   Web of Science ®Google Scholar
• Saleh, N. F., Keshavarzi, B., Rad, F. Y., Mocelin, D., Elwardany, M., Castorena, C., Underwood, B. S., & Kim, Y. R. (2020). Effects of aging on asphalt mixture and pavement performance. Construction and Building Materials, 258, https://doi.org/10.1016/j.conbuildmat.2020.120309
   Web of Science ®Google Scholar
• Sirin, O., Paul, D. K., Kassem, E., & Ohiduzzaman, M. (2017). Effect of ageing on asphalt binders in the state of Qatar: A case study. Road Materials and Pavement Design, 18(sup4), 165–184. https://doi.org/10.1080/14680629.2017.1389094
   Web of Science ®Google Scholar
• Sirin, O., Paul, D. K., Khan, M. S., Kassem, E., & Darabi, M. K. (2019). Effect of aging on viscoelastic properties of asphalt mixtures. Journal of transportation engineering. Part B: Pavements, 145(4). https://doi.org/10.1061/JPEODX.0000137
   Google Scholar
• Soenen, H., Lu, X., & Laukkanen, O. (2016). Oxidation of bitumen: Molecular characterization and influence on rheological properties. Rheologica Acta, 55(4), 315–326. https://doi.org/10.1007/s00397-016-0919-6
   Web of Science ®Google Scholar
• Subhy, A., Pires, G. M., Carrion, A. J. B., Lo Presti, D., & Airey, G. (2019). Binder and mixture fatigue performance of plant-produced road surface course asphalt mixtures with high contents of reclaimed asphalt. Sustainability, 11(13), 3752. https://doi.org/10.3390/su11133752
   Web of Science ®Google Scholar
• Tauste, R., Moreno-Navarro, F., Sol-Sánchez, M., & Rubio-Gámez, M. C. (2018). Understanding the bitumen ageing phenomenon: A review. Construction and Building Materials, 192, 593–609. https://doi.org/10.1016/j.conbuildmat.2018.10.169
   Web of Science ®Google Scholar
• Tran, N., Xie, Z., Julian, G., Taylor, A., Willis, R., Robbins, M., & Buchanan, S. (2017). Effect of a recycling agent on the performance of high-RAP and high-RAS mixtures: Field and lab experiments. Journal of Materials in Civil Engineering, 29(1), 1. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001697
   Web of Science ®Google Scholar
• Wakefield, A., Anderson, R. M., McKay, Z., & Tighe, S. L. (2018). A review of solvent extraction-recovery procedures and their effect on recovered asphalt binder properties. Canadian Technical Asphalt Association Conference.
   Google Scholar
• Walther, A., Buchler, S., & Falchetto, A. C. (2019). Experimental investigation on asphalt mixtures prepared with reclaimed asphalt pavement and rejuvenators based on the BTSV method. Road Materials and Pavement Design, 20(6), 1634–1646. https://doi.org/10.1080/14680629.2019.1594053
   Google Scholar
• Zaumanis, M., Arraigada, S. A., Zayer, W. K., Cavalli, M. C., & Poulikakos, L. D. (2019). Performance-based design of 100% recycled hot-mix asphalt and validation using traffic load simulator. Journal of Cleaner Production, 237, 117679. https://doi.org/10.1016/j.jclepro.2019.117679
   Web of Science ®Google Scholar
• Zaumanis, M., Cavalli, M. C., & Poulikakos, L. D. (2019). How not to design 100% recycled asphalt mixture using performance-based tests. Road Materials and Pavement Design, 21(6), 1634–1646. https://doi.org/10.1080/14680629.2018.1561381
   Web of Science ®Google Scholar
• Zhang, C., Ren, Q., Qian, Z., & Wang, X. (2019). Evaluating the effects of high RAP and content and rejuvenating agents on fatigue performance of fine aggregate matrix through DMA flexural bending test. Materials, 12(9), 1508. https://doi.org/10.3390/ma12091508.
   PubMed Web of Science ®Google Scholar
• Zhang, F., Yu, J., & Wu, S. (2010). Effect of ageing on rheological properties of storage-stable SBS/sulfur-modified asphalts. Journal of Hazardous Materials, 182(1–3), 507–517. https://doi.org/10.1016/j.jhazmat.2010.06.061
   PubMed Web of Science ®Google Scholar
• Zhou, Z., Gu, X., Dong, Q., Ni, F., & Jiang, Y. (2019). Rutting and fatigue cracking performance of SBS-RAP blended binders with a rejuvenator. Construction and Building Materials, 203, 294–303. https://doi.org/10.1016/j.conbuildmat.2019.01.119
   Web of Science ®Google Scholar
• Ziyani, L., Boulangé, L., Nicolai, A., & Mouillet, V. (2017). Bitumen extraction and recovery in road industry: A global methodology in solvent substitution from a comprehensive review. Journal of Cleaner Production, 161, 53–68. https://doi.org/10.1016/j.jclepro.2017.05.022
   Web of Science ®Google Scholar