134
Views
1
CrossRef citations to date
0
Altmetric
Research Articles

Model for calculation of thermal stresses in concrete pavement slabs with refined non-linear deformation constraints

&
Pages 820-837 | Received 08 Mar 2023, Accepted 22 Jun 2023, Published online: 04 Jul 2023

References

  • Benayoune, A., Samad, A. A., Trikha, D., Ali, A. A., & Ellinna, S. (2008). Flexural behaviour of pre-cast concrete sandwich composite panel–experimental and theoretical investigations. Construction and Building Materials, 22(4), 580–592. https://doi.org/10.1016/j.conbuildmat.2006.11.023
  • Bradbury, R. D. (1938). Reinforced concrete pavements. Wire Reinforcement Institute.
  • Byrum, C. R. (2012). Falling weight deflectometer joint load tests used for direct calculation of pavement joint stiffness. Transportation Research Record: Journal of the Transportation Research Board, 2306(1), 95–104. https://doi.org/10.3141/2306-11
  • Choinska, M., Khelidj, A., Chatzigeorgiou, G., & Pijaudier-Cabot, G. (2007). Effects and interactions of temperature and stress-level related damage on permeability of concrete. Cement and Concrete Research, 37(1), 79–88. https://doi.org/10.1016/j.cemconres.2006.09.015
  • Han, L. Z., Chen, L. L., & Tian, B. (2014). Influence of paving condition on longitudinal cracking of Portland cement concrete pavemented. Advanced Materials ResearchTrans Tech Publ, 857, 204–211. https://doi.org/10.4028/www.scientific.net/AMR.857.204.
  • Huang, Y., & Wang, S. (1974). Finite-element analysis of rigid pavements with partial subgrade contact. Transportation Research Record, 485, 39–54.
  • Koay, Y. C., Xie, Y. M., & Setunge, S. (2010). Investigation of various methods for minimising uneven displacements in pedestrian concrete pavements. Road Materials and Pavement Design, 11(2), 479–488. https://doi.org/10.1080/14680629.2010.9690285
  • Liang, R. Y., & Niu, Y.-Z. (1998). Temperature and curling stress in concrete pavements: Analytical solutions. Journal of Transportation Engineering, 124(1), 91–100. https://doi.org/10.1061/(ASCE)0733-947X(1998)124:1(91)
  • Ling, J., Wei, F., Zhao, H., Tian, Y., & Han, B. (2019). Analysis of airfield composite pavement responses using full-scale accelerated pavement testing and finite element method. Construction and Building Materials, 212, 596–606. https://doi.org/10.1016/j.conbuildmat.2019.03.336
  • Mackiewicz, P. (2014). Thermal stress analysis of jointed plane in concrete pavements. Applied Thermal Engineering, 73(1), 1169–1176. https://doi.org/10.1016/j.applthermaleng.2014.09.006
  • Mackiewicz, P. (2015). Finite-element analysis of stress concentration around dowel bars in jointed plain concrete pavement. Journal of Transportation Engineering, 141(6), 06015001. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000768
  • Mackiewicz, P., & Szydło, A. (2020). Thermal stress analysis in concrete pavements. Journal of Transportation Engineering, Part B: Pavements, 146(3), 06020002. https://doi.org/10.1061/JPEODX.0000192
  • Masad, E., Taha, R., & Muhunthan, B. (1996). Finite-element analysis of temperature effects on plain-jointed concrete pavements. Journal of Transportation Engineering, 122(5), 388–398. https://doi.org/10.1061/(ASCE)0733-947X(1996)122:5(388)
  • Mastali, M., Naghibdehi, M. G., Naghipour, M., & Rabiee, S. (2015). Experimental assessment of functionally graded reinforced concrete (FGRC) slabs under drop weight and projectile impacts. Construction and Building Materials, 95, 296–311. https://doi.org/10.1016/j.conbuildmat.2015.07.153
  • Mora-Ruacho, J., Gettu, R., & Aguado, A. (2009). Influence of shrinkage-reducing admixtures on the reduction of plastic shrinkage cracking in concrete. Cement and Concrete Research, 39(3), 141–146. https://doi.org/10.1016/j.cemconres.2008.11.011
  • Nishizawa, T., Koyanagawa, M., Takeuchi, Y., Kubo, K., & Yoshimoto, T. (2017). Thermal stress calculation method for concrete pavement based on temperature prediction and finite element method analysis. Transportation Research Record: Journal of the Transportation Research Board, 2640(1), 104–114. https://doi.org/10.3141/2640-12
  • Park, H. W., Shim, C. S., Lim, J. S., Joe, N. H., & Jeong, J. H. (2017). Development of three-dimensional finite element model for structural analysis of airport concrete pavements. International Journal of Highway Engineering, 19(6), 67–74. https://doi.org/10.7855/IJHE.2017.19.6.067
  • Riad, M., Shoukry, S., William, G., & Rao-Hejamadi, D. (2008). Curling of concrete slabs on grade: Experimental versus theoretical analysis. Structure and Infrastructure Engineering, 4(1), 57–72. https://doi.org/10.1080/15732470600822066
  • Sen, S., & Khazanovich, L. (2021). Reconsidering the strength of concrete pavements. International Journal of Pavement Engineering, 1–11. https://doi.org/10.1080/10298436.2021.2020270.
  • Shi, X., Mukhopadhyay, A., Zollinger, D., & Huang, K. (2021). Performance evaluation of jointed plain concrete pavement made with Portland cement concrete containing reclaimed asphalt pavement. Road Materials and Pavement Design, 22(1), 59–81. https://doi.org/10.1080/14680629.2019.1616604
  • Shoukry, S., William, G., & Riad, M. (2007). Effect of thermal stresses on mid-slab cracking in dowel jointed concrete pavements. Structure and Infrastructure Engineering, 3(1), 43–51. https://doi.org/10.1080/15732470500253214
  • Shoukry, S. N., Fahmy, M., Prucz, J., & William, G. (2007). Validation of 3dfe analysis of rigid pavement dynamic response to moving traffic and nonlinear temperature gradient effects. International Journal of Geomechanics, 7(1), 16–24. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:1(16)
  • Shoukry, S. N., William, G., & Riad, M. (2003). Nonlinear temperature gradient effects in dowel jointed concrete slabs. International Journal of Pavement Engineering, 4(3), 131–142. https://doi.org/10.1080/10298430310001632629
  • Tan, Z., & Yao, Z. (2001). Thermal stress in two-layer concrete slab due to restraint of interface. Journal of Traffic and Transportation Engineering, 1(1), 25–28.
  • Tan, Z., Yao, Z., & Liu, B. (2003). Thermal stress analysis of two-layered concrete slabs. China Journal of Highway and Transport, 16(2), 10–12.
  • Tan, Z., Zhou, Y., Liu, S., & Shen, J. (2010). Mechanistic model of double-layered concrete pavement structures with unequal planar dimensions. Engineering Mechanics, 27(03), 132–137.
  • Tasri, A., & Susilawati, A. (2019). Effect of material of post-cooling pipes on temperature and thermal stress in mass concrete. Structures, 20, 204–212. https://doi.org/10.1016/j.istruc.2019.03.015.
  • Wei, Y., Gao, X., Wang, F., & Zhong, Y. (2019). Nonlinear strain distribution in a field-instrumented concrete pavement slab in response to environmental effects. Road Materials and Pavement Design, 20(2), 367–380. https://doi.org/10.1080/14680629.2017.1395353
  • Wei, Y., & Hansen, W. (2013). Tensile creep behavior of concrete subject to constant restraint at very early ages. Journal of Materials in Civil Engineering, 25(9), 1277–1284. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000671
  • Westergaard, H. M. (1926). Stresses in concrete pavements computed by theoretical analysis. Public Roads, 7, 25–35.
  • Westergaard, H. M. (1927). Analysis of stresses in concrete pavements due to variations of temperatureed. Proceedings of the 6th Annual. Meeting Highway Research Board, 6, 201–215.
  • William, G. W., & Shoukry, S. N. (2001). 3D finite element analysis of temperature-induced stresses in dowel jointed concrete pavements. International Journal of Geomechanics, 1(3), 291–307. https://doi.org/10.1061/(ASCE)1532-3641(2001)1:3(291)
  • Xin, J., Jiang, X., Chen, Z., Zuo, L., Zhang, G., Wang, Z., Qi, C., Zhang, L., & Liu, Y. (2022). Early age thermal cracking resistance of basalt fiber-reinforced concrete for mass concrete structures under restraint condition. Structures, 45, 1189–1198. https://doi.org/10.1016/j.istruc.2022.09.101.
  • Xu, Y., Xu, Q., Chen, S., & Li, X. (2017). Self-restraint thermal stress in early-age concrete samples and its evaluation. Construction and Building Materials, 134, 104–115. https://doi.org/10.1016/j.conbuildmat.2016.12.066
  • Yin, W., Lu, H., Yuan, J., & Huang, B. (2022). Mechanical characteristics of dowel bar-concrete interaction: Based on substructure experiment. International Journal of Pavement Engineering, 23(7), 2392–2404. https://doi.org/10.1080/10298436.2020.1857380
  • Zenkour, A. M., & Sobhy, M. (2011). Thermal buckling of functionally graded plates resting on elastic foundations using the trigonometric theory. Journal of Thermal Stresses, 34(11), 1119–1138. https://doi.org/10.1080/01495739.2011.606017
  • Zhang, J., Fwa, T., Tan, K., & Shi, X. (2003). Model for nonlinear thermal effect on pavement warping stresses. Journal of Transportation Engineering, 129(6), 695–702. https://doi.org/10.1061/(ASCE)0733-947X(2003)129:6(695)
  • Zhang, J., Hou, D., & Gao, Y. (2013). Calculation of shrinkage stress in early-age concrete pavements. Ii: Calculation of shrinkage stress. Journal of Transportation Engineering, 139 (10), 971–980. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000582
  • Zhang, J., Zhang, G., Wang, Y., & Yuan, J. (2022). Mechanical behavior of doweled joints in concrete pavements: A review. Journal of Transportation Engineering, Part B: Pavements, 148(4), 03122002. https://doi.org/10.1061/JPEODX.0000399
  • Zokaei-Ashtiani, A., Tirado, C., Carrasco, C., & Nazarian, S. (2016). Impact of different approaches to modelling rigid pavement base layers on slab curling stresses. International Journal of Pavement Engineering, 17(10), 861–869. https://doi.org/10.1080/10298436.2015.1019505

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.