Estimating dislocation density from electron backscatter diffraction data for an AZ31/Mg-0.6Gd hybrid alloy fabricated by high-pressure torsion

References

• B.L. Mordike and T. Ebert, Magnesium: Properties — applications — potential. Mater. Sci. Eng. A 302 (2001), pp. 37–45.
   Web of Science ®Google Scholar
• J. Hirsch and T. Al-Samman, Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications. Acta Mater. 61 (2013), pp. 818–843.
   Web of Science ®Google Scholar
• X. Li, X. Liu, S. Wu, K.W.K. Yeung, Y. Zheng, and P.K. Chu, Design of magnesium alloys with controllable degradation for biomedical implants: From bulk to surface. Acta Biomater. 45 (2016), pp. 2–30.
   PubMed Web of Science ®Google Scholar
• B. Elambharathi, S.D. Kumar, V.U. Dhanoop, S. Dinakar, S. Rajumar, S. Sharma, V. Kumar, C. Li, E.M.T. Eldin, and S. Wojciechowski, Novel insights on different treatment of magnesium alloys: A critical review. Heliyon 8 (2022), article number e11712.
   PubMed Web of Science ®Google Scholar
• J. Song, J. Chen, X. Xiong, X. Peng, D. Chen, and F. Pan, Research advances of magnesium and magnesium alloys worldwide in 2021. Journal of Magnesium and Alloys 10 (2022), pp. 863–898.
   Web of Science ®Google Scholar
• N. Hassanzadeh and T.G. Langdon, Invited viewpoint: biodegradable Mg batteries. J. Mater. Sci. 58 (2023), pp. 13721–13743.
   Web of Science ®Google Scholar
• E.A. Ball and P.B. Prangnell, Tensile-compressive yield asymmetries in high strength wrought magnesium alloys. Scr. Metall. Mater. 31 (1994), pp. 111–116.
   Google Scholar
• K. Hantzsche, J. Bohlen, J. Wendt, K.U. Kainer, S.B. Yi, and D. Letzig, Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets. Scr. Mater. 63 (2010), pp. 725–730.
   Web of Science ®Google Scholar
• A. Imandoust, C.D. Barrett, T. Al-Samman, K.A. Inal, and H.E. Kadiri, A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys. J. Mater. Sci. 52 (2017), pp. 1–29.
   Web of Science ®Google Scholar
• H. Azzeddine, A. Hanna, A. Dakhouche, L. Rabahi, N. Scharnagl, M. Dopita, F. Brisset, A.-L. Helbert, and T. Baudin, Impact of rare-earth elements on the corrosion performance of binary magnesium alloys. J. Alloys Compd. 829 (2020), article number 154569.
   Web of Science ®Google Scholar
• H. Azzeddine, A. Hanna, A. Dakhouche, and B. Luthringer-Feyerabend, Corrosion behaviour and cytocompatibility of selected binary magnesium-rare earth alloys. Journal of Magnesium and Alloys 9 (2021), pp. 581–591.
   Web of Science ®Google Scholar
• A.P. Zhilyaev and T.G. Langdon, Using high-pressure torsion for metal processing: Fundamentals and applications. Prog. Mater. Sci. 53 (2008), pp. 893–979.
   Web of Science ®Google Scholar
• K. Edalati, A. Bachmaier, V.A. Beloshenko, Y. Beygelzimer, V.D. Blank, W.J. Botta, K. Bryła, J. Čížek, S. Divinski, N.A. Enikeev, Y. Estrin, G. Faraji, R.B. Figueiredo, M. Fuji, T. Furuta, T. Grosdidier, J. Gubicza, A. Hohenwarter, Z. Horita, J. Huot, Y. Ikoma, M. Janeček, M. Kawasaki, P. Král, S. Kuramoto, T.G. Langdon, D.R. Leiva, V.I. Levitas, A. Mazilkin, M. Mito, H. Miyamoto, T. Nishizaki, R. Pippan, V.V. Popov, E.N. Popova, G. Purcek, O. Renk, Á Révész, X. Sauvage, V. Sklenicka, W. Skrotzki, B.B. Straumal, S. Suwas, L.S. Toth, N. Tsuji, R.Z. Valiev, G. Wilde, M.J. Zehetbauer, and X. Zhu, Nanomaterials by severe plastic deformation: Review of historical developments and recent advances. Materials Research Letters 10 (2022), pp. 163–256.
   Web of Science ®Google Scholar
• O. Ould Mohamed, H. Azzeddine, Y. Huang, T. Baudin, P. Bazarnik, F. Brisset, M. Kawasaki, and T.G. Langdon, Investigation of microstructure and texture evolution in an AZ31/Mg–Gd alloy hybrid metal fabricated by high-pressure torsion. Adv. Eng. Mater. 25 (2023), article number 2201794.
   Web of Science ®Google Scholar
• A. Baczmanski, K. Wierzbanowski, A. Benmarouane, A. Lodini, P. Lipiński, and B. Bacroix, Stored energy and recrystallization process. Mater. Sci. Forum 539-543 (2007), pp. 3335–3340.
   Google Scholar
• E. Schafler, G. Steiner, E. Korznikova, M. Kerber, and M.J. Zehetbauer, Lattice defect investigation of ECAP-Cu by means of X-ray line profile analysis, calorimetry and electrical resistometry. Mater. Sci. Eng. A 410-411 (2005), pp. 169–173.
   Web of Science ®Google Scholar
• A.L. Etter, T. Baudin, M.H. Mathon, W. Swiatnicki, and R. Penelle, Stored energy evolution in both phases of a duplex steel as a function of cold rolling reduction. Scr. Mater. 54 (2006), pp. 683–688.
   Web of Science ®Google Scholar
• H. Azzeddine, Y.I. Bourezg, A.Y. Khereddine, T. Baudin, A.-L. Helbert, F. Brisset, M. Kawasaki, D. Bradai, and T.G. Langdon, An investigation of the stored energy and thermal stability in a Cu–Ni–Si alloy processed by high-pressure torsion. Philos. Mag. 100 (2020), pp. 688–712.
   Web of Science ®Google Scholar
• C. Fressengeas, B. Beausir, C. Kerisit, A.-L. Helbert, T. Baudin, F. Brisset, M.-H. Mathon, R. Besnard, and N. Bozzolo, On the evaluation of dislocation densities in pure tantalum from EBSD orientation data. Matériaux & Techniques 106 (2018), article number 604.
   Web of Science ®Google Scholar
• M.F. Ashby, The deformation of plastically non-homogeneous materials. The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics 21 (1970), pp. 399–424.
   Web of Science ®Google Scholar
• J.F. Nye, Some geometrical relations in dislocated crystals. Acta Metall. 1 (1953), pp. 153–162.
   Google Scholar
• H. Gao, Y. Huang, W.D. Nix, and J.W. Hutchinson, Mechanism-based strain gradient plasticity— I. Theory. J. Mech. Phys. Solids 47 (1999), pp. 1239–1263.
   Web of Science ®Google Scholar
• D.P. Field, P.B. Trivedi, S.I. Wright, and M. Kumar, Analysis of local orientation gradients in deformed single crystals. Ultramicroscopy 103 (2005), pp. 33–39.
   PubMed Web of Science ®Google Scholar
• M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe, Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD. Mater. Sci. Eng. A 527 (2010), pp. 2738–2746.
   Web of Science ®Google Scholar
• M. Kamaya, Assessment of local deformation using EBSD: Quantification of accuracy of measurement and definition of local gradient. Ultramicroscopy 111 (2011), pp. 1189–1199.
   PubMed Web of Science ®Google Scholar
• T.J. Ruggles and D.T. Fullwood, Estimations of bulk geometrically necessary dislocation density using high resolution EBSD. Ultramicroscopy 133 (2013), pp. 8–15.
   PubMed Web of Science ®Google Scholar
• Y. Ateba Betanda, A.-L. Helbert, F. Brisset, M.-H. Mathon, T. Waeckerlé, and T. Baudin, Measurement of stored energy in Fe–48%Ni alloys strongly cold-rolled using three approaches: Neutron diffraction, Dillamore and KAM approaches. Mater. Sci. Eng. A 614 (2014), pp. 193–198.
   Web of Science ®Google Scholar
• R.B. Figueiredo, P.R. Cetlin, and T.G. Langdon, Using finite element modeling to examine the flow processes in quasi-constrained high-pressure torsion. Mater. Sci. Eng. A 528 (2011), pp. 8198–8204.
   Web of Science ®Google Scholar
• R.B. Figueiredo, P.H.R. Pereira, M.T.P. Aguilar, P.R. Cetlin, and T.G. Langdon, Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion. Acta Mater. 60 (2012), pp. 3190–3198.
   Web of Science ®Google Scholar
• K. Edalati, Z. Horita, and T.G. Langdon, The significance of slippage in processing by high-pressure torsion. Scr. Mater. 60 (2009), pp. 9–12.
   Web of Science ®Google Scholar
• F. Wetscher, A. Vorhauer, R. Stock, and R. Pippan, Structural refinement of low alloyed steels during severe plastic deformation. Mater. Sci. Eng. A 387-389 (2004), pp. 809–816.
   Web of Science ®Google Scholar
• Y. Takayama and J.A. Szpunar, Stored energy and Taylor factor relation in an Al-Mg-Mn alloy sheet worked by continuous cyclic bending. Mater. Trans. 45 (2004), pp. 2316–2325.
   Web of Science ®Google Scholar
• S. Wroński, J. Tarasiuk, B. Bacroix, A. Baczmański, and C. Braham, Investigation of plastic deformation heterogeneities in duplex steel by EBSD. Mater. Charact. 73 (2012), pp. 52–60.
   Web of Science ®Google Scholar
• W. Pantleon, Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction. Scr. Mater. 58 (2008), pp. 994–997.
   Web of Science ®Google Scholar
• Y. Mikami, K. Oda, M. Kamaya, and M. Mochizuki, Effect of reference point selection on microscopic stress measurement using EBSD. Mater. Sci. Eng. A 647 (2015), pp. 256–264.
   Web of Science ®Google Scholar
• J.-H. Cho, A.D. Rollett, and K.H. Oh, Determination of a mean orientation in electron backscatter diffraction measurements. Metallurgical and Materials Transactions A 36 (2005), pp. 3427–3438.
   Google Scholar
• O. Ould Mohamed, P. Bazarnik, Y. Huang, H. Azzeddine, T. Baudin, F. Brisset, and T.G. Langdon, A Comparative Study Between AZ31 and Mg-Gd Alloys After High-Pressure Torsion. J. Mater. Eng. Perform. (2023).
   Web of Science ®Google Scholar
• P. Chakravarty, G. Pál, and J.J. Sidor, The dependency of work hardening on dislocation statistics in cold rolled 1050 aluminum alloy. Mater. Charact. 191 (2022), article number 112166.
   Web of Science ®Google Scholar
• P. Lisiecka-Graca, K. Bzowski, J. Majta, and K. Muszka, A dislocation density-based model for the work hardening and softening behaviors upon stress reversal. Archives of Civil and Mechanical Engineering 21 (2021), article number 84.
   Web of Science ®Google Scholar
• D.P. Field, C.C. Merriman, N. Allain-Bonasso, and F. Wagner, Quantification of dislocation structure heterogeneity in deformed polycrystals by EBSD. Modell. Simul. Mater. Sci. Eng. 20 (2012), article number 024007.
   Web of Science ®Google Scholar
• C. Zhu, T. Harrington, V. Livescu, G.T. Gray, and K.S. Vecchio, Determination of geometrically necessary dislocations in large shear strain localization in aluminum. Acta Mater. 118 (2016), pp. 383–394.
   Web of Science ®Google Scholar
• C. Moussa, M. Bernacki, R. Besnard, and N. Bozzolo, Statistical analysis of dislocations and dislocation boundaries from EBSD data. Ultramicroscopy 179 (2017), pp. 63–72.
   PubMed Web of Science ®Google Scholar