The effect of wood species on chainsaw vibrations during bucking operations

References

• Broyde M, Donati P, Bitsch L. 1989. Subjective assessment of the vibration discomfort produced by different hand held machines. J Low Freq Noise Vib Act Control. 8(2):50–61. doi:10.1177/026309238900800204.
   Google Scholar
• Crowe MP. 1983. The chainsaw in Australia. Aust for. 46(1):14–24. doi:10.1080/00049158.1983.10674372.
   Google Scholar
• Dabrowski A. 2015. Kickback risk of portable chainsaws while cutting wood of different properties: laboratory tests and deductions. Int J Occup Saf Ergon. 21(4):512–523. doi:10.1080/10803548.2015.1095547.
   PubMed Web of Science ®Google Scholar
• Davis G. 1978. Noise and vibration hazards in chainsaw operations: a review. Aust for. 41(3):153–159. doi:10.1080/00049158.1978.10674186.
   Google Scholar
• Depoi J, Brandelero C, Werner V, Schlosser JF, Russini A, Vargas F. 2022. Hand-arm vibration in different operating conditions with a chainsaw. Floresta. 52(1):74–82. doi:10.5380/rf.v52i1.77415.
   Google Scholar
• Dimou V, Kantartzis A, Malesios C, Kasampalis E. 2019. Research of exhaust emissions by chainsaws with the use of a portable emission measurement system. Int J for Eng. 30(3):228–239. doi:10.1080/14942119.2019.1622318.
   Web of Science ®Google Scholar
• European Parliament [EP]. 2002. Directive 2002/44/EC of the European Parliament and of the Council of 25 June 2002 on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (vibration). Sixteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC. Off J Eur Communities. 45(L 177):13–19.
   Google Scholar
• Giacomin J, Shayaa MS, Dormegnie E, Richard L. 2004. Frequency weighting for the evaluation of steering wheel rotational vibration. Int J Ind Ergon. 33(6):527–541. doi:10.1016/j.ergon.2003.12.005.
   Web of Science ®Google Scholar
• Goglia V, Gospodaric Z, Kosutic S, Filipovic D. 2003. Hand-transmitted vibration from the steering wheel to drivers of a small four-wheel drive tractor. Appl Ergon. 34(1):45–49. doi:10.1016/S0003-6870(02)00076-5.
   PubMed Web of Science ®Google Scholar
• Griffin MJ, Howarth HVC, Pitts PM, Fischer S, Kaulbars U, Donati PM, Bereton PF 2006. Guide to good practice on hand-arm vibration. Non-binding guide to good practice with a view to implementation of Directive 2002/44/EC on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (vibrations). place unknown: European Commission Directorate General Employment, Social Affairs and Equal Opportunities. http://resource.isvr.soton.ac.uk/HRV/VIBGUIDE/HAV%20Good%20practice%20Guide%20V7.7%20English%20260506.pdf
   Google Scholar
• Groves KW, Lyons RG. 1968. Occupational hazards for chainsaw operators. Aust for. 32(4):205–210. doi:10.1080/00049158.1968.10674125.
   Google Scholar
• Hagen KB. 1990. Biomechanical analysis of spinal load in motor-manual cutting. Int J for Eng. 2(1):39–41. doi:10.1080/08435243.1990.10702622.
   Google Scholar
• Han H, Renzie C. 2005. Effect of ground slope, stump diameter, and species on stump height for feller-buncher and chainsaw felling. Int J for Eng. 16(2):81–88. doi:10.1080/14942119.2005.10702517.
   Google Scholar
• Harstela P. 1990. Work postures and strain of workers in Nordic forest work: a selective review. Int J Ind Ergon. 5(3):219–226. doi:10.1016/0169-8141(90)90058-A.
   Google Scholar
• Hellstrom B, Lange Anderson K. 1972. Vibration injuries in Norwegian forest workers. Br J Ind Med. 29(3):255–263. https://www.jstor.org/stable/27722722
   PubMedGoogle Scholar
• Hooper B, Parker R, Todoroki C. 2017. Exploring chainsaw operator occupational exposure to carbon monoxide in forestry. J Occup Environ Hyg. 14(1):D1–12. doi:10.1080/15459624.2016.1229483.
   PubMed Web of Science ®Google Scholar
• Hutton SG, Paris N, Brubaker R. 1993. The vibration characteristics of chain saws and their influence on vibration white finger disease. Ergonomics. 36(8):911–926. doi:10.1080/00140139308967956.
   PubMed Web of Science ®Google Scholar
• International Organization for Standardization. 1986. ISO 7505: forestry machinery- chain saws- measurement of hand-transmitted vibration. Geneva: International Organization for Standardization.
   Google Scholar
• International Organization for Standardization. 2001. ISO 5349-1: mechanical vibration-measurement and evaluation of human exposure to hand transmitted vibration- Part 1: general requirements. Geneva: International Organization for Standardization.
   Google Scholar
• Kaliniewicz Z, Maleszewski L, Maleszewski Z. 2018. Influence of saw chain type and wood species on the kickback angle of a chainsaw. Tech Sci. 21(4):323–334. doi:10.31648/ts.4176.
   Google Scholar
• Kauppinen T, Vincent R, Liukkonen T, Grzebyk M, Kauppinen A, Welling I, Arezes P, Black N, Bochmann F, Campelo F, et al. 2006. Occupational exposure to inhalable wood dust in the member states of the European Union. Ann Work Expo Health. 50(6):549–561. doi:10.1093/annhyg/mel013.
   Google Scholar
• Ko YH, Ean OL, Ripin ZM. 2011. The design and development of suspended handles for reducing hand-arm vibration in petrol driven grass trimmer. Int J Ind Ergon. 41(5):459–470. doi:10.1016/j.ergon.2011.04.004.
   Web of Science ®Google Scholar
• Koehler SA, Luckasevic TM, Rozin L, Shakir A, Ladham S, Omalu B, Dominick J, Wecht CH. 2004. Death by chainsaw: fatal kickback injuries to the neck. J Forensic Sci. 49(2):345–350. doi:10.1520/JFS2003276.
   PubMed Web of Science ®Google Scholar
• Kovac J, Krilek J, Dado M, Beno P. 2018. Investigating the influence of design factors on noise and vibrations in the case of chainsaws for forestry work. FME Transactions. 46(4):513–519. doi:10.5937/fmet1804513K.
   Web of Science ®Google Scholar
• Kumlin T, Wiikeri M, Sumari P. 1973. Radiological changes in carpal and metacarpal bones and phalanges caused by chain saw vibration. Br J Ind Med. 30(1):71–73. https://www.jstor.org/stable/27722786
   PubMedGoogle Scholar
• Landekic M, Bacic M, Pandur Z, Susnjar M. 2020. Vibration levels of used chainsaws. Forests. 11(2):1–10. doi:10.3390/f11020249.
   Web of Science ®Google Scholar
• Magnusson R, Nilsson C, Andersson K, Andersson B, Gieling R, Wiberg K, Ostman C, Rannug U. 2000. Determination of chemical composition and mutagenicity in particles from chainsaw exhaust. Experimental set-up, stability and results from two different fuels. Environ Technol. 21(7):819–829. doi:10.1080/09593330.2000.9618969.
   Web of Science ®Google Scholar
• Majumdar MSM, Das AK, Shams MI, Chowdhury MQ. 2014. Effect of age and height position on physical and mechanical properties of rubber wood (hevea brasiliensis) of Bangladesh. Bangladesh J Sci Ind Res. 49(2):79–84. doi:10.3329/bjsir.v49i2.22000.
   Google Scholar
• Malinowska-Borowska J, Harazin B, Zielinski G. 2011. The influence of wood hardness and logging operation on coupling forces exerted by lumberjacks during wood harvesting. Int J Ind Ergon. 41(5):546–550. doi:10.1016/j.ergon.2011.06.001.
   Web of Science ®Google Scholar
• Marchi E, Neri F, Cambi M, Laschi A, Foderi C, Sciarra G, Fabiano F. 2017. Analysis of dust exposure during chainsaw forest operations. iForest. 10:341–347. doi:10.3832/ifor2123-009.
   Web of Science ®Google Scholar
• Marence J, Mihelic M, Poje A. 2017. Influence of chain filing, tree species and chain type on cross cutting efficiency and health risk. Forests. 8(12):1–10. doi:10.3390/f8120464.
   Web of Science ®Google Scholar
• Morioka M, Griffin MJ. 2006. Magnitude-dependence of equivalent comfort contours for fore-and-aft, lateral and vertical hand-transmitted vibration. J Sound Vib. 295(3–5):633–648. doi:10.1016/j.jsv.2006.01.029.
   Web of Science ®Google Scholar
• Nagao M, Yamada Y. 2019. Physical effects of hinges shape on chainsaw felling direction in Japanese Cypress. Int J for Eng. 30(3):182–189. doi:10.1080/14942119.2019.1613611.
   Web of Science ®Google Scholar
• Neri F, Foderi C, Laschi A, Fabiano F, Cambi M, Sciarra G, Aprea MC, Cenni A, Marchi E. 2016. Determining exhaust fumes exposure in chainsaw operations. Environ Pollut. 218:1162–1169. doi:10.1016/j.envpol.2016.08.070.
   PubMed Web of Science ®Google Scholar
• Neri F, Laschi A, Foderi C, Fabiano F, Bertuzzi L, Marchi E. 2018. Determining noise and vibration exposure in conifer cross-cutting operations by using Li-Ion batteries and electric chainsaws. Forests. 9(8):1–13. doi:10.3390/f9080501.
   Web of Science ®Google Scholar
• Parker P, Sullman M, Kirk P, Ford D. 1999. Chainsaw size for delimbing. Ergonimics. 42(7):897–903. doi:10.1080/001401399185199.
   PubMed Web of Science ®Google Scholar
• Puntaric D, Kos A, Smit Z, Zecic Z, Sega K, Beljo-Lucic R, Horvat D, Bosnir J. 2005. Wood dust exposure in wood industry and forestry. Coll Antropol. 29(1):207–211.
   PubMedGoogle Scholar
• Rottensteiner C, Stampfer K. 2013. Evaluation of operator vibration exposure to chainsaws equipped with a Kesper safety bar. Scand J for Res. 28(2):193–200. doi:10.1080/02827581.2012.706636.
   Google Scholar
• Rottensteiner C, Tsioras P, Stampfer K. 2012. Wood density Impact on hand-arm vibration. Croat J for Eng. 33(2):303–312.
   Web of Science ®Google Scholar
• Rukat W, Barczewski R, Jakubek B, Wrobel M 2018. The comparison of vibro-acoustic impact of chainsaws with electric and combustion drives. Paper presented at: 17th International Conference Diagnostics of Machines and Vehicles; Sep 25-26; Bydgoszcz, Poland.
   Google Scholar
• Rukat W, Jakubek B, Barczewski R, Wrobel M. 2020. The influence of the direction of wood cutting on the vibration and noise of chainsaws. Tech Gaz. 27(6):1879–1886. doi:10.17559/TV-20190719101429.
   Google Scholar
• Sam B, Kathirvel K. 2006. Vibration characteristics of walking and riding type power tillers. Biosyst Eng. 95(4):517–528. doi:10.1016/j.biosystemseng.2006.08.013.
   Web of Science ®Google Scholar
• Sawastian K, Grzywinski W, Turowski R. 2015. Analysis of postural strain of loggers during timber harvesting in a spruce stand. For Lett. 108:1–6.
   Google Scholar
• Selim AA, Sobh K, Fathy SM. 2012. Hand-arm vibration syndrome clinical and neuro-physiological studies. Aust J Basic Appl Sci. 6(6):292–299.
   Google Scholar
• Sessions J. 2007. Harvesting operations in the tropics. New York (NY): Springer.
   Google Scholar
• Stoyneva Z, Lyapina M, Tzvetkov D, Vodenicharov E. 2003. Current pathophysiological views on vibration-induced Raynaud’s phenomenon. Cardiovasc Res. 57(3):615–624. doi:10.1016/S0008-6363(02)00728-9.
   PubMed Web of Science ®Google Scholar
• Taylor W, Pearson J, Kell RL, Keighley GD. 1971. Vibration syndrome in Forestry Commission chain saw operators. Br J Ind Med. 28(1):83–89. https://www.jstor.org/stable/27722594
   PubMedGoogle Scholar
• Theriault G, Guire LD, Gingras S, Laroche G. 1982. Raynaud’s phenomenon in forestry workers in Quebec. Can Med Assoc J. 126(12):1404–1408. http://www.cmaj.ca/content/126/12/1404
   PubMed Web of Science ®Google Scholar
• Tobita K, Nitami T, Yoshioka T. 2019. Factors associated with injuries related to chainsaw tree felling in Japan. Int J for Eng. 30(3):190–194. doi:10.1080/14942119.2018.1555966.
   Web of Science ®Google Scholar
• Wang J, Long C, McNeel J, Baumgras J. 2004. Productivity and cost of manual felling and cable skidding in central Appalachian hardwood forests. For Prod J. 54(12):45–51.
   Web of Science ®Google Scholar
• Winandy JE. 1994. Wood properties. In: Arntzen C, editor. Encyclopedia of Agricultural Science. (Vol. 4). Orlando: Academic Press; pp. 549–561.
   Google Scholar
• Yamada S, Sakakibara H. 1994. Research into hand-arm vibration syndrome and its prevention in Japan. Nagoya J Med Sci. 57(Suppl):3–17.
   PubMedGoogle Scholar