Study on interface characteristics of n-heptane spray in sub/supercritical conditions

References

• Ai, Y., H. Wu, V. Markov, J. Zhao, and X. Li. 2023. Impact of fuel properties on the transition of liquid-gas interface dynamics under supercritical pressure. Combustion and Flame 257:2. doi:10.1016/j.combustflame.2023.113005.
   Web of Science ®Google Scholar
• Babayev, R., A. Andersson, A. S. Dalmau, H. G. Im, and B. Johansson. 2022. Computational comparison of the conventional diesel and hydrogen direct-injection compression-ignition combustion engines. Fuel 307:121909. doi:10.1016/j.fuel.2021.121909.
   Web of Science ®Google Scholar
• Balog, R., J. Langer, S. Gohlke, M. Stano, H. Abdoul-Carime, and E. Illenberger. 2004. Low energy electron driven reactions in free and bound molecules: From unimolecular processes in the gas phase to complex reactions in a condensed environment. International Journal of Mass Spectrometry 233 (1–3):267–91. doi:10.1016/j.ijms.2003.12.030.
   Web of Science ®Google Scholar
• Ba, J., W. Wei, L. Zhao. Numerical simulation of trans-/near-/supercritical injection characteristics based on real fluid properties. Energy, 2023, 278: 127767.
   Web of Science ®Google Scholar
• Deng, L., and M. Xie. 2016. Molecular dynamics simulation of liquid-vapor interface in sub/supercritical surroundings. Journal of Engineering Thermophysics 37 (8):1802–07.
   Google Scholar
• Dong, T., B. Liu, F. Zhang, Y. Wang, B. Wang, and P. Liu. 2017. Control oriented modeling and analysis of gas exchange and combustion processes for LTC diesel engine. Applied Thermal Engineering 110:1305–14. doi:10.1016/j.applthermaleng.2016.09.001.
   Web of Science ®Google Scholar
• Falgout, Z., M. Rahm, Z. Wang, and M. Linne. 2015. Evidence for supercritical mixing layers in the ECN spray a. Proceedings of the Combustion Institute 35 (2):1579–86. doi:10.1016/j.proci.2014.06.109.
   Google Scholar
• Fan, X., G. Yu, J. Li. 2022. Investigation of vaporized kerosene injection in a supersonic model combustor. Journal of Propulsion & Power. doi:10.2514/1.15427.
   Google Scholar
• Fathi, M., O. Jahanian, and M. Shahbakhti. 2017. Modeling and controller design architecture for cycle-by-cycle combustion control of homogeneous charge compression ignition (HCCI) engines–a comprehensive review. Energy Conversion and Management 139:1–19. doi:10.1016/j.enconman.2017.02.038.
   Web of Science ®Google Scholar
• Gao, W., Y. Lin, X. Hui, C. Zhang, and Q. Xu. 2019. Injection characteristics of near critical and supercritical kerosene into quiescent atmospheric environment. Fuel 235:775–81. doi:10.1016/j.fuel.2018.08.048.
   Web of Science ®Google Scholar
• Gong, Y., K. H. Luo, X. Ma, S. Shuai, and H. Xu. 2021. Atomic-level insights into transition mechanism of dominant mixing modes of multi-component fuel droplets: From evaporation to diffusion. Fuel 304:121464. doi:10.1016/j.fuel.2021.121464.
   Web of Science ®Google Scholar
• Gong, Y., G. Xiao, X. Ma, K. H. Luo, S. Shuai, and H. Xu. 2021. Phase transitions of multi-component fuel droplets under sub-and supercritical conditions. Fuel 287:119516. doi:10.1016/j.fuel.2020.119516.
   Web of Science ®Google Scholar
• Huang, H., C. Jia, C. Shi. 2019. Experimental on spray characteristics of diesel/PODE3-4. Transactions of Csice 2:105–13.
   Google Scholar
• Hu, Z., and X. Zhang. 2019. Study on laminar combustion characteristic of low calorific value gas blended with hydrogen in a constant volume combustion bomb. International Journal of Hydrogen Energy 44 (1):487–493. doi:10.1016/j.ijhydene.2018.02.055.
   Web of Science ®Google Scholar
• Jeon, J., J. T. Lee, Y. S. Lim, S. I. Kwon, Y. H. Park, J. Cha, K. Lee, and S. Park. 2013. Flame temperature distributions of biodiesel fuel in a single-cylinder diesel engine. Fuel Processing Technology 110:227–34. doi:10.1016/j.fuproc.2012.12.019.
   Web of Science ®Google Scholar
• Li, L., D. Shanxi, and D. Xing. 2005. Image segmentation binarization algorithm based on Otsu method. Microcomputer Information 21 (8X):76–77.
   Google Scholar
• Li, R., C. Tang, X. Wu. 2021, May 28. The invention relates to a device and method for judging spray gas-liquid interface in high-temperature and high-pressure conditions based on schlieren technology. China: CN112858305A.
   Google Scholar
• Liu, F., Y. Gao, Z. Zhang, X. He, H. Wu, C. Zhang, F. Zeng, and X. Hou. 2018. Study of the spray characteristics of a diesel surrogate for diesel engines under sub/supercritical states injected into atmospheric environment. Fuel 230:308–18. doi:10.1016/j.fuel.2018.05.050.
   Web of Science ®Google Scholar
• Liu, Y., Y. Pei, Z. Peng, J. Qin, Y. Zhang, Y. Ren, and M. Zhang. 2017. Spray development and droplet characteristics of high temperature single-hole gasoline spray. Fuel 191:97–105. doi:10.1016/j.fuel.2016.11.068.
   Web of Science ®Google Scholar
• Li, Y., H. Wang, and W. Chen. 2010. Fuel droplet evaporation in sub-critical and super-critical pressure environments. Journal of Combustion Science and Technology 16 (4):287–94.
   Google Scholar
• Li, L., M. Xie, W. Wei, M. Jia, and H. Liu. 2018. Numerical investigation on cryogenic liquid jet under transcritical and supercritical conditions. Cryogenics 89:16–28. doi:10.1016/j.cryogenics.2017.10.021.
   Web of Science ®Google Scholar
• Lu, X., D. Han, and Z. Huang. 2011. Fuel design and management for the control of advanced compression-ignition combustion modes. Progress in Energy and Combustion Science 37 (6):741–783. doi:10.1016/j.pecs.2011.03.003.
   Web of Science ®Google Scholar
• Mingrui, W. 2009. Fuel spray initial crushing and secondary atomization mechanism research. Journal of Internal Combustion Engine .
   Google Scholar
• Olabi, A. G., D. Maizak, and T. Wilberforce. 2020. Review of the regulations and techniques to eliminate toxic emissions from diesel engine cars. Science of the Total Environment 748:141249. doi:10.1016/j.scitotenv.2020.141249.
   PubMed Web of Science ®Google Scholar
• Qian, Y., Z. Wu, J. Guo, Z. Li, C. Jiang, and X. Lu. 2019. Experimental studies on the key parameters controlling the combustion and emission in premixed charge compression ignition concept based on diesel surrogates. Applied Energy 235:233–46. doi:10.1016/j.apenergy.2018.10.104.
   Web of Science ®Google Scholar
• Qin, L., L. L. Dong, W. H. Xu. 2015. Method for conversion calibration between CCD image gray value and illumination. Chinese Journal of Scientific Instrument 36 (3):639–44.
   Google Scholar
• Settles, G. S. 2001. Schlieren and shadowgraph techniques: Visualizing phenomena in transparent media. Berlin, Heidelberg: Springer Science & Business Media.
   Google Scholar
• Shin, B., D. Kim, M. Son, and J. Koo. 2017. Effects of supercritical environment on hydrocarbon-fuel injection. Journal of Thermal Science 26 (2):183–91. doi:10.1007/s11630-017-0928-5.
   Web of Science ®Google Scholar
• Shu, J., J. Fu, D. Zhao, J. Liu, Y. Ma, B. Deng, D. Zeng, J. Liu, and Y. Zhang. 2019. Numerical investigation on the effects of valve timing on in-cylinder flow, combustion and emission performance of a diesel ignition natural gas engine through computational fluid dynamics. Energy Conversion and Management 198:111786. doi:10.1016/j.enconman.2019.111786.
   Web of Science ®Google Scholar
• Sönmez, H. İ., F. Okumu, C. Kaya, Z. Aydin, A. Safa, and G. Kökkülünk. 2022. Waste to energy conversion: Pyrolytic oil and biodiesel as a renewable fuel blends on diesel engine combustion, performance, and emissions. International Journal of Green Energy 19 (12):1333–44. doi:10.1080/15435075.2021.1996367.
   Web of Science ®Google Scholar
• Sovani, S. D., E. Chou, P. E. Sojka, J. P. Gore, W. A. Eckerle, and J. D. Crofts. 2001. High pressure effervescent atomization: Effect of ambient pressure on spray cone angle. Fuel 80 (3):427–35. doi:10.1016/S0016-2361(00)00105-8.
   Web of Science ®Google Scholar
• Wang, J., Y. Fang, Z. Huang. 2007. Experimental study of the jet characteristics of high-pressure injected natural gas using high speed photograph method. Transactions of Csice 6:500–04.
   Google Scholar
• Wang, Z., Y. Qian, and R. Li. 2023a. Li R.Study of fuel spray characteristics using a high-pressure common rail diesel injection system by the method of schlieren. International Journal of Engine Research 24 (8):3445–3459. doi:10.1177/14680874231151815.
   Google Scholar
• Wang, Z., Y. Qian, and R. Li. 2023b. Study of fuel spray characteristics using a high-pressure common rail diesel injection system by the method of schlieren. International Journal of Engine Research 24 (8):3445–59. doi:10.1177/14680874231151815.
   Google Scholar
• Wanstall, C. T., J. A. Bittle, and A. K. Agrawal. 2022. Transient mixing behavior of a supercritical fluid injected into supercritical and subcritical environments. Physics of Fluids 34 (2). doi:10.1063/5.0072291.
   Web of Science ®Google Scholar
• Wei, S., L. Sun, L. Wu, Z. Yu, and Z. Zhang. 2022. Study of combustion characteristics of diesel, kerosene (RP-3) and kerosene-ethanol blends in a compression ignition engine. Fuel 317:123468. doi:10.1016/j.fuel.2022.123468.
   Web of Science ®Google Scholar
• Xia, J., Z. Huang, L. Xu, D. Ju, and X. Lu. 2019. Experimental study on spray and atomization characteristics under subcritical, transcritical and supercritical conditions of marine diesel engine. Energy Conversion and Management 195:958–71. doi:10.1016/j.enconman.2019.05.080.
   Web of Science ®Google Scholar
• Xia, W., Z. Lidan, Z. Xiao. 2016. A method for measuring penetration distance of oil injector spray. Mechanical Engineering & Automation 198 (5):147–49.
   Google Scholar
• Xiao, G., K. H. Luo, X. Ma, and S. Shuai. 2018. Liquid fuel evaporation under supercritical conditions. Communications in Computational Physics 23 (4):1241–62. doi:10.4208/cicp.OA-2016-0252.
   Web of Science ®Google Scholar
• Xiao, G., K. H. Luo, X. Ma, and S. Shuai. 2019. A molecular dynamics study of fuel droplet evaporation in sub-and supercritical conditions. Proceedings of the Combustion Institute 37 (3):3219–27. doi:10.1016/j.proci.2018.09.020.
   Web of Science ®Google Scholar
• Xie, S., Y. Fu, P. Yi, T. Li, and R. Chen. 2022. Evaluation of trans-critical transition of single-and multi-component sprays under diesel engine-like conditions. Applied Thermal Engineering 202:117830. doi:10.1016/j.applthermaleng.2021.117830.
   Web of Science ®Google Scholar
• Yu, K., and J. Yin. 2021. Heat transfer analysis of submerged combustion vaporizer under subcritical pressure and comparison with supercritical pressure. Cryogenics 120:103372. doi:10.1016/j.cryogenics.2021.103372.
   Web of Science ®Google Scholar
• Zhihao, M. A., J. Yi, C. Zhanyao. 2018. Phenomenological study on the fuel injecting into sub-and super-critical environments. Journal of Xi’an Jiaotong University 52 (9): 7. doi:10.7652/xjtuxb201809017.
   Google Scholar