Numerical thermal performance assessment of phase change process in a PCM/foam-fins enclosure under various thermal conditions

References

• Bianco, N., S. Busiello, M. Iasiello, and G. M. Mauro. 2021. Finned heat sinks with phase change materials and metal foams: Pareto optimization to address cost and operation time. Applied Thermal Engineering 197:117436. doi:10.1016/j.applthermaleng.2021.117436.
   Web of Science ®Google Scholar
• Chen, C., Y. Diao, Y. Zhao, Z. Wang, Y. Han, Z. Wang, Y. Liu, D. Fang, and T. Zhu. 2023. Thermal performance of cold thermal energy storage system with fin and fin–foam structures. Applied Thermal Engineering 228:120459. doi:10.1016/j.applthermaleng.2023.120459.
   Web of Science ®Google Scholar
• Cui, W., T. Si, X. Li, X. Li, L. Lu, T. Ma, and Q. Wang. 2022. Heat transfer analysis of phase change material composited with metal foam-fin hybrid structure in inclination container by numerical simulation and artificial neural network. Energy Reports 8:10203–18. doi:10.1016/j.egyr.2022.07.178.
   Web of Science ®Google Scholar
• Du, Z., G. Liu, X. Huang, T. Xiao, X. Yang, and Y.-L. He. 2023. Numerical studies on a fin-foam composite structure towards improving melting phase change. International Journal of Heat and Mass Transfer 208:124076. doi:10.1016/j.ijheatmasstransfer.2023.124076.
   Web of Science ®Google Scholar
• Eleiwi, M. A., N. D. Mokhlif, and H. F. Saleh. 2023. Improving the performance of the thermal energy storage of the solar water heater by using porous medium and phase change material. Energy Sources Part A: Recovery, Utilization, and Environmental Effects 45 (1):2013–26. doi:10.1080/15567036.2023.2185316.
   Web of Science ®Google Scholar
• Erfani Farsi Eidgah, E., M. M. Ghafurian, A. Tavakoli, A. Mortazavi, and A. Kianifar. 2023. Solar-thermal conversion and thermal energy storage of different phase change materials. Journal of Thermal Analysis and Calorimetry 148:8051–60. doi:10.1007/s10973-023-12276-0.
   Web of Science ®Google Scholar
• Gao, Y., F. Liu, J. Wang, W. Ye, and X. Meng. 2021. Influence of the copper foam shape on thermal performance of phase-change material. Journal of Energy Storage 36:102416. doi:10.1016/j.est.2021.102416.
   Web of Science ®Google Scholar
• Hassani Soukht Abandani, M., and D. Domiri Ganji. 2021. Melting effect in triplex-tube thermal energy storage system using multiple PCMs-porous metal foam combination. Journal of Energy Storage 43:103154. doi:10.1016/j.est.2021.103154.
   Web of Science ®Google Scholar
• Heyhat, M. M., S. Mousavi, and M. Siavashi. 2020. Battery thermal management with thermal energy storage composites of PCM, metal foam, fin and nanoparticle. Journal of Energy Storage 28:101235. doi:10.1016/j.est.2020.101235.
   Web of Science ®Google Scholar
• He, F., J. Zou, X. Meng, W. Gao, and L. Ai. 2022. Effect of copper foam fin (CFF) shapes on thermal performance improvement of the latent heat storage units. Journal of Energy Storage 45:103520. doi:10.1016/j.est.2021.103520.
   Web of Science ®Google Scholar
• Khedher, N. B., J. M. Mahdi, H. Majdi, W. K. Al-Azzawi, S. Dhahbi, and P. Talebizadehsardari. 2022. A hybrid solidification enhancement in a latent-heat storage system with nanoparticles, porous foam, and fin-aided foam strips. Journal of Energy Storage 56:106070. doi:10.1016/j.est.2022.106070.
   Web of Science ®Google Scholar
• Kim, Y. J., K. Kim, Lee E. J, E. C. Kang, and E. J. Lee. 2023. Numerical study on soundproof photovoltaic–thermal air path design based on ISO 9806 experimental validation. Journal of Thermal Analysis and Calorimetry 148 (19):10269–83. doi:10.1007/s10973-023-12410-y.
   Web of Science ®Google Scholar
• Liu, W., and Y. Huang. 2023. Numerical instantiation of complex open-cell metal foam microstructure and evaluation of its thermal performance on the melting of composite phase change material. Journal of Energy Storage 72:108252. doi:10.1016/j.est.2023.108252.
   Web of Science ®Google Scholar
• Meng, X., L. Meng, J. Zou, and F. He. 2021. Influence of the Copper Foam Fin (CFF) shapes on thermal performance of Phase-Change Material (PCM) in an enclosed cavity. Case Studies in Thermal Engineering 23:100810. doi:10.1016/j.csite.2020.100810.
   Web of Science ®Google Scholar
• Meng, X., L. Yan, and F. He. 2020. Filling copper foam partly on thermal behavior of phase-change material in a rectangular enclosure. Journal of Energy Storage 32:101867. doi:10.1016/j.est.2020.101867.
   Web of Science ®Google Scholar
• Mirshekar, A., M. R. Goodarzi, D. Mohebbi-Kalhori, and M. H. Shafiei Mayam. 2023. Experimental study of heat transfer enhancement using metal foam partially filled with phase change material in a heat sink. Journal of Energy Storage 60:106496. doi:10.1016/j.est.2022.106496.
   Web of Science ®Google Scholar
• NematpourKeshteli, A., M. Iasiello, G. Langella, and N. Bianco. 2023. Increasing melting and solidification performances of a phase change material-based flat plate solar collector equipped with metal foams, nanoparticles, and wavy wall-Y-shaped surface. Energy Conversion and Management 291:117268. doi:10.1016/j.enconman.2023.117268.
   Web of Science ®Google Scholar
• Öztop, H. F., and E. B. Sezgin. 2023. Effects of streamlined container design on control melting time of Phase Change Materials. Energy Sources Part A: Recovery, Utilization, and Environmental Effects 45 (3):8584–600. doi:10.1080/15567036.2023.2227152.
   Web of Science ®Google Scholar
• Rahmanian-Koushkaki, H., S. Rahmanian, M. Moein-Jahromi, and K. Sopian. 2022. Performance evaluation of concentrated photovoltaics with phase change materials embedded metal foam-based heat sink using gradient strategy. International Journal of Energy Research 46 (9):12290–315. n/a. doi:10.1002/er.7996.
   Web of Science ®Google Scholar
• Rahmanian, S., M. Moein-Jahromi, H. Rahmanian-Koushkaki, and K. Sopian. 2021. Performance investigation of inclined CPV system with composites of PCM, metal foam and nanoparticles. Solar Energy 230:883–901. doi:10.1016/j.solener.2021.10.088.
   Web of Science ®Google Scholar
• Shank, K., and S. Tiari. 2023. Computational thermal analysis of a latent heat storage unit augmented with porous fins. Case Studies in Thermal Engineering 49:103383. doi:10.1016/J.CSITE.2023.103383.
   Web of Science ®Google Scholar
• Shu, G., T. Xiao, J. Guo, P. Wei, X. Yang, and Y.-L. He. 2023. Effect of charging/discharging temperatures upon melting and solidification of PCM-metal foam composite in a heat storage tube. International Journal of Heat and Mass Transfer 201:123555. doi:10.1016/j.ijheatmasstransfer.2022.123555.
   Web of Science ®Google Scholar
• Wang, H., Q. Ying, E. Lichtfouse, Z. Hu, and Y. Diao. 2023. Effect of filling configurations on melting heat transfer characteristic of phase change materials partially filled with metal foam. Journal of Energy Storage 69:107858. doi:10.1016/j.est.2023.107858.
   Web of Science ®Google Scholar
• Xiao, T., Z. Du, L. Lu, Y. Li, X. Huang, X. Yang, and Y.-L. He. 2023. Melting of phase change materials inside metal foams with uniform/graded porosity: Pore-scale simulation. Applied Thermal Engineering 232:121082. doi:10.1016/j.applthermaleng.2023.121082.
   Web of Science ®Google Scholar
• Yang, X., F. Xu, X. Wang, J. Guo, and M.-J. Li. 2023. Solidification in a shell-and-tube thermal energy storage unit filled with longitude fins and metal foam: A numerical study. Energy and Built Environment 4 (1):64–73. doi:10.1016/j.enbenv.2021.08.002.
   Google Scholar
• Zhao, C., M. Opolot, M. Liu, F. Bruno, S. Mancin, and K. Hooman. 2020. Numerical study of melting performance enhancement for PCM in an annular enclosure with internal-external fins and metal foams. International Journal of Heat and Mass Transfer 150:119348. doi:10.1016/j.ijheatmasstransfer.2020.119348.
   Web of Science ®Google Scholar
• Zhao, C., M. Opolot, M. Liu, F. Bruno, S. Mancin, and K. Hooman. 2021. Phase change behaviour study of PCM tanks partially filled with graphite foam. Applied Thermal Engineering 196:117313. doi:10.1016/j.applthermaleng.2021.117313.
   Web of Science ®Google Scholar
• Zou, J., and X. Meng. 2023. Investigating the effect of distribution form of copper foam fins on the thermal performance improvement of latent thermal energy storage units. International Communications in Heat and Mass Transfer 141:106571. doi:10.1016/j.icheatmasstransfer.2022.106571.
   Web of Science ®Google Scholar