References
- Bataineh, K. M., and N. Fayez. 2011. Analysis of thermal performance of building attached sunspace. Energy and Buildings 43 (8):1863–68. doi:10.1016/j.enbuild.2011.03.030.
- Brown, S., and I. Beausoleil-Morrison. 2021. Characterizing the performance of a passive solar house with hydronic floor energy capture system – Heating season experiments. Energy and Buildings 252:111404. doi:10.1016/j.enbuild.2021.111404.
- Chandel, S. S., and A. Sarkar. 2015. Performance assessment of a passive solar building for thermal comfort and energy saving in a hilly terrain of India. Energy and Buildings 86:873–85. doi:10.1016/j.enbuild.2014.10.035.
- Elaouzy, Y., and A. El Fadar. 2022. Energy, economic and environmental benefits of integrating passive design strategies into buildings: A review. Renewable and Sustainable Energy Reviews 167:112828. doi:10.1016/j.rser.2022.112828.
- Gainza-Barrencua, J., M. Odriozola-Maritorena, X. Barrutieta, I. Gomez-Arriaran, and R. Hernández Minguillón. 2022. Use of sunspaces to obtain energy savings by preheating the intake air of the ventilation system: Analysis of its main characteristics in the different Spanish climate zones. Journal of Building Engineering 62:105331. doi:10.1016/j.jobe.2022.105331.
- GB 50019-2003 Code for design of heating ventilation and air conditioning, 2003.
- GB 50176-2016. Code for thermal design of civil building [S], 2017.
- Hwang, R.-L., and W.-A. Chen. 2022. Creating glazed facades performance map based on energy and thermal comfort perspective for office building design strategies in Asian hot-humid climate zone. Applied Energy 311:118689. doi:10.1016/j.apenergy.2022.118689.
- JGJ/T 267-2012. 2012. Technical code for passive solar buildings [S].
- Jian, Y., and Y. Jiang. 2002. Comparison of indoor temperatures between simulation results and field measurements. Housing Science 7:3–5.
- Jiang, Y. 2006. Building environmental system simulation and analysis—DeST, China Architecture and Building Press. US.
- Lotfabadi, P. 2015. Analyzing passive solar strategies in the case of high-rise building. Renewable and Sustainable Energy Reviews 52:1340–53. doi:10.1016/j.rser.2015.07.189.
- Monge-Barrio, A., and A. Sánchez-Ostiz. 2015. Energy efficiency and thermal behaviour of attached sunspaces, in the residential architecture in Spain. Summer Conditions. Energy & Buildings 108:244–56. doi:10.1016/j.enbuild.2015.09.037.
- Perez, R., P. Ineichen, R. Seals, J. Michalsky, and R. Stewart. 1990. Modeling daylight availability and irradiance components from direct and global irradiance. Solar Energy 44 (5):271–89. doi:10.1016/0038-092X(90)90055-H.
- Peterkin, N. 2009. Rewards for passive solar design in the building code of Australia. Renewable Energy 34 (2):440–43. doi:10.1016/j.renene.2008.05.017.
- Rabah, K. 2005. Development of energy-efficient passive solar building design in Nicosia Cyprus. Renewable Energy 30 (6):937–56. doi:10.1016/j.renene.2004.09.003.
- Shuangxi, Y. 2011. Study on thermal load characteristics on passive solar house with attached sunspace [D]. US: Xi’an University of Architecture and Technology. (in Chinese).
- Uludaş, M. Ç., E. Tunçbilek, Ç. Yıldız, M. Arıcı, D. Li, and M. Krajčík. 2022. PCM-enhanced sunspace for energy efficiency and CO2 mitigation in a house in Mediterranean climate. Journal of Building Engineering 57:104856. doi:10.1016/j.jobe.2022.104856.
- Wang, L., L. Guo, J. Ren, and X. Kong. 2022. Using of heat thermal storage of PCM and solar energy for distributed clean building heating: A multi-level scale-up research. Applied Energy 321:119345. doi:10.1016/j.apenergy.2022.119345.
- Xu, X., Y. Zhang, K. Lin, H. Di, and R. Yang. 2005. Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings. Energy and Buildings 37 (10):1084–91. doi:10.1016/j.enbuild.2004.12.016.
- Yin, S. 2013. Study on thermal load characteristics on passive solar house with attached sunspace [D]. Xi’an University of Architecture and Technology.
- Zhang, J., Y. Chen, Y. Wang, Q. Meng, Q. Sun, D. Sun, and Y. Li. 2023. A multistory, ultra-strong lignocellulose-based structural material for passive solar heating. Industrial Crops and Products 202:116961. doi:10.1016/j.indcrop.2023.116961.
- Zhang, L., Z. Dong, F. Liu, H. Li, X. Zhang, K. Wang, C. Chen, and C. Tian. 2023. Passive solar sunspace in a Tibetan Buddhist house in Gannan cold areas: Sensitivity analysis. Journal of Building Engineering 67:105960. doi:10.1016/j.jobe.2023.105960.
- Zhang, X., X. Xie, D. Yan, and Y. Jiang. 2004. Building environment design simulation software DeST (3): Validation of dynamic simulation results of building thermal progress. HV&AC 34 (9):37–50.
- Zhang, Y., G. Sang, P. Li, M. Du, T. Guo, X. Cui, L. Zhang, and W. Han. 2022. Study on the influence of thermo-physical parameters of phase change material panel on the indoor thermal environment of passive solar buildings in Tibet. Journal of Energy Storage 52:105019. doi:10.1016/j.est.2022.105019.
- Zhao, J., H. Li, and D. Liu. 2022. Local thermal comfort-based optimal design of attached sunspace with breathing window for farmhouses in North China. Building and Environment 219:109251. doi:10.1016/j.buildenv.2022.109251.
- Zhu, J., and B. Chen. 2015. Experimental study on thermal response of passive solar house with color changed. Renewable Energy 73:55–61. doi:10.1016/j.renene.2014.05.062.