40
Views
0
CrossRef citations to date
0
Altmetric
Research article

Studying the impact of monitoring strategy on disinfection performance evaluation with computational fluid dynamics

&
Pages 285-294 | Received 03 May 2023, Accepted 08 Nov 2023, Published online: 24 Nov 2023

References

  • Angeloudis, A., T. Stoesser, and R. A. Falconer. 2014. “Predicting the Disinfection Efficiency Range in Chlorine Contact Tanks Through a CFD-Based Approach.” Water Research 60:118–129. https://doi.org/10.1016/j.watres.2014.04.037.
  • Angeloudis, A., T. Stoesser, R. A. Falconer, and D. Kim. 2015. “Flow, Transport and Disinfection Performance in Small-And Full-Scale Contact Tanks.” Journal of Hydro-Environment Research 9 (1): 15–27. https://doi.org/10.1016/j.jher.2014.07.001.
  • ANSYS Fluent. 2016. “ANSYS Fluent 12.0 user’s guide.” Accessed July 22, 2022. http://www.afs.enea.it/project/neptunius/docs/fluent/html/ug/main_pre.htm.
  • Aral, M. M., and E. Demirel. 2017. “Novel Slot-Baffle Design to Improve Mixing Efficiency and Reduce Cost of Disinfection in Drinking Water Treatment.” Journal of Environmental Engineering 143 (9): 06017006. https://doi.org/10.1061/(ASCE)EE.1943-7870.0001266.
  • Bruno, P., G. Di Bella, and M. De Marchis. 2020. “Perforated Baffles for the Optimization of Disinfection Treatment.” Water 12 (12): 3462. https://doi.org/10.3390/w12123462.
  • Bruno, P., G. Di Bella, and M. De Marchis. 2021. “Effect of the Contact Tank Geometry on Disinfection Efficiency.” Journal of Water Process Engineering 41:102035. https://doi.org/10.1016/j.jwpe.2021.102035.
  • Carlston, J. S., and S. K. Venayagamoorthy. 2015. “Impact of Modified Inlets on Residence Times in Baffled Tanks.” Journal‐American Water Works Association 107 (6): 292–300. https://doi.org/10.5942/jawwa.2015.107.0078.
  • Colorado Department of Public Health and Environment Water Quality Control Division. 2021. Technical Guidance Manual on Computational Fluid Dynamics Modeling of Chlorine Contact Basins, Safe Drinking Water Program. March.
  • Crittenden, J. C., R. R. Trussell, D. W. Hand, K. J. Howe, and G. Tchobanoglous. 2012. Mwh’s Water Treatment: Principles and Design. Hoboken, New Jersey, USA: John Wiley & Sons.
  • Crozes, G., J. Hagstrom, M. Clark, J. Ducoste, and C. Burns. 1999. Improving Clearwell Design for CT Compliance. Denver Colorado, USA: AWWA Research Foundation.
  • Demirel, E., and M. M. Aral. 2016. “Unified Analysis of Multi-Chamber Contact Tanks and Mixing Efficiency Based on Vorticity Field. Part I: Hydrodynamic Analysis.” Water 8 (11): 495. https://doi.org/10.3390/w8110495.
  • Goodarzi, D., S. Abolfathi, and S. Borzooei. 2020. “Modelling Solute Transport in Water Disinfection Systems: Effects of Temperature Gradient on the Hydraulic and Disinfection Efficiency of Serpentine Chlorine Contact Tanks.” Journal of Water Process Engineering 37:101411. https://doi.org/10.1016/j.jwpe.2020.101411.
  • Gualtieri, C., and G. P. Doria. 2007. “Residence time distribution and dispersion in a contact tank.” Proceedings of the Congress-International Association for Hydraulic Research 32 (2): 486.
  • Hofman, J. A. M. H., L. Shao, B. A. Wols, W. S. J. Uijttewaal, and G. IJpelaar 2007. “Design of UV Reactors by CFD: Model Development and Experimental Validation.” In European COMSOL Conference (pp. 866–870). Grenoble, France: COMSOL.
  • Huang, T., C. J. Brouckaert, M. Docrat, and M. Pryor. 2002. “A computational fluid dynamic and experimental study of an ozone contactor.” Water Science and Technology 46 (9): 87–93. https://doi.org/10.2166/wst.2002.0212.
  • Huang, T., C. J. Brouckaert, M. Pryor, and C. A. Buckley. 2004. “Application of Computational Fluid Dynamics Modeling to an Ozone Contactor.” Water SA 30 (1): 51–56. https://doi.org/10.4314/wsa.v30i1.5026.
  • Kattnig, J. J., and S. K. Venayagamoorthy. 2015. “A Hybrid Approach for Increasing Baffling Factors in Contact Tanks.” Journal‐American Water Works Association 107 (12): 702–711. https://doi.org/10.5942/jawwa.2015.107.0164.
  • Khan, L. A., E. A. Wicklein, and E. C. Teixeira. 2006. “Validation of a Three-Dimensional Computational Fluid Dynamics Model of a Contact Tank.” Journal of Hydraulic Engineering 132 (7): 741–746. https://doi.org/10.1061/(ASCE)0733-9429(2006)132:7(741).
  • Kim, D., M. Elovitz, P. J. Roberts, and J. H. Kim. 2010. “Using 3D LIF to Investigate and Improve Performance of a Multichamber Ozone Contactor.” Journal‐American Water Works Association 102 (10): 61–70. https://doi.org/10.1002/j.1551-8833.2010.tb10207.x.
  • Kim, D., D. I. Kim, J. H. Kim, and T. Stoesser. 2010. “Large Eddy Simulation of Flow and Tracer Transport in Multichamber Ozone Contactors.” Journal of Environmental Engineering 136 (1): 22–31. https://doi.org/10.1061/(ASCE)EE.1943-7870.0000118.
  • Launder, B. E. 1978. Heat and Mass Transport. Chap. 6 in Turbulence, edited by P. Bradshaw. Berlin: Springer.
  • Nasyrlayev, N., and E. Demirel. 2022. “Design Optimization of the Porous Baffle in a Disinfection Contact Tank for High Efficiency.” Urban Water Journal 19 (7): 758–768. https://doi.org/10.1080/1573062X.2022.2086884.
  • Nasyrlayev, N., M. A. Kizilaslan, A. T. Kurumus, E. Demirel, and M. M. Aral. 2020. “A Perforated Baffle Design to Improve Mixing in Contact Tanks.” Water 12 (4): 1022. https://doi.org/10.3390/w12041022.
  • Ouedraogo, F., J. Zhang, P. Cornejo-Warner, A. E. Tejada-Martínez, Q. Zhang, and J. R. Mihelcic. 2016. “Impact of Sludge Layer Geometry on Hydraulic Performance of the Waste Stabilization Pond in Bolivia.” Water Research 99: 253–262. https://doi.org/10.1016/j.watres.2016.05.011.
  • Teefy, S. 1996. Tracer Studies in Water Treatment Facilities: A Protocol and Case Studies. American Water Works Association.
  • USEPA. 1991. Guidance Manual for Compliance with the Filtration and Disinfection Requirements for Public Water Systems Using Surface Water Sources. Washington, DC: USEPA.
  • USEPA. (2003). Disinfection Profiling and Benchmarking Guidance Manual. EPA 816-R-03-004. Washington, DC: USEPA.
  • Van der Walt, J. J., and J. Haarhoff. 2000. Is a Reservoir Really That Simple? A CFD Investigation into the Internal Hydraulics of Reservoirs. In Proceedings of WISA 2000 Conference, Sun City, South Africa.
  • Wicklein, E., D. J. Batstone, J. Ducoste, J. Laurent, A. Griborio, J. Wicks, S. Saunders, R. Samstag, O. Potier, and I. Nopens. 2016. “Good Modelling Practice in Applying Computational Fluid Dynamics for WWTP Modelling.” Water Science and Technology 73 (5): 969–982. https://doi.org/10.2166/wst.2015.565.
  • Wilcox, D. C.1994. Turbulence modeling for CFD. La Ca˜nada Flintridge, CA: DCW Industries.
  • Zhang, J., P. M. Huck, G. D. Stubley, and W. B. Anderson. 2008. “Application of a multiphase CFD modelling approach to improve ozone residual monitoring and tracer testing strategies for full-scale drinking water ozone disinfection processes.” Journal of Water Supply: Research and Technology—AQUA 57 (2): 79–92. https://doi.org/10.2166/aqua.2008.038.
  • Zhang, J., A. E. Tejada-Martínez, and Q. Zhang. 2014. “Developments in Computational Fluid Dynamics-Based Modeling for Disinfection Technologies Over the Last Two Decades: A Review.” Environmental Modelling & Software 58:71–85. https://doi.org/10.1016/j.envsoft.2014.04.003.
  • Zhang, J., A. E. Tejada-Martínez, Q. Zhang, and H. Lei. 2014. “Evaluating Hydraulic and Disinfection Efficiencies of a Full-Scale Ozone Contactor Using a RANS-Based Modeling Framework.” Water Research 52:155–167. https://doi.org/10.1016/j.watres.2013.12.037.
  • Zhang, J., X. Xu, A. Tejada‐Martinez, Q. Zhang, and E. Wicklein. 2019. “Evaluating Reactor Hydraulics in a Cost‐Effective and Environment‐Friendly Way: Numerical Tracer Study.” AWWA Water Science 1 (6): e1163. https://doi.org/10.1002/aws2.1163.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.