References
- 3DCS_V5- Help Manual, http://www.3dcs.com/tolerance-analysis-software-and-spc-systems/3dcs-software/catia-v5-integrated
- ASME, American Society of Mechanical Engineers, Digital Product Definition Practices ASME Y14.41-2003, American Society of Mechanical Engineers, New York, 2003.
- ASME, American Society of Mechanical Engineers, Digital Product Definition Practices ASME Y14.5-2009, American Society of Mechanical Engineers, New York, 2009.
- Barbero, B. R.; Azcona, J. P.; Pérez, J. G.: A tolerance analysis and optimization methodology. The combined use of 3D CAT, a dimensional hierarchization matrix and an optimization algorithm, The International Journal of Advanced Manufacturing Technology, 81(1–4), 2015, 371–385. https://doi.org/10.1007/s00170-015-7068-4
- Ceruti, A., Liverani, A., Bombardi, T.: Augmented vision and interactive monitoring in 3D printing process, International Journal on Interactive Design and Manufacturing, 11(2), 2017, 385–395. https://doi.org/10.1007/s12008-016-0347-y
- Corrado, A.; Polini, W.: Manufacturing signature in Jacobian and torsor models for tolerance analysis of rigid parts, Robotics and Computer-Integrated Manufacturing, 46, 2017, 15–24. https://doi.org/10.1016/j.rcim.2016.11.004
- Corrado, A.; Polini, W.; Moroni, G.: Manufacturing signature and operating conditions in a variational model for tolerance analysis of rigid assemblies, Research in Engineering Design, 2017, 1–16. Article in Press. https://doi.org/10.1007/s00163-017-0250-y
- Davidson, J. K.; Mujezinovic, A.; Shah, J. J.: A new mathematical model for geometric tolerances as applied to round faces, Journal of mechanical design, 124(4), 2002, 609–622. https://doi.org/10.1115/1.1497362
- Desrochers, A.; Ghie, W.; Laperriere, L: Application of a unified Jacobian-Torsor model for tolerance analysis, Journal of Computing and Information Science in Engineering (Transactions of the ASME), 3(1), 2003, 2–14. https://doi.org/10.1115/1.1573235
- Desrochers, A.; Rivière A.: A matrix approach to the representation of tolerance zones and clearances, Int J Adv Manuf Technol, 13, 1997, 630–636. https://doi.org/10.1007/BF01350821
- Di Angelo, L., Di Stefano, P., & Morabito, A. (2017). Product model for Dimensioning, Tolerancing and Inspection. In Advances on Mechanics, Design Engineering and Manufacturing, 2017, 1033–1040, Springer International Publishing. https://doi.org/10.1007/978-3-319-45781-9_103
- Fang, F.Z.; Li, Z.; Arokiam, A.; Gorman, T: Closed Loop PMI Driven Dimensional Quality Lifecycle Management Approach for Smart Manufacturing System, Procedia CIRP, 56, 2016 pp. 614–619. https://doi.org/10.1016/j.procir.2016.10.121
- Frechette, S. P.; Jones, A. T.; Fischer, B. R.: Strategy for testing conformance to geometric dimensioning & tolerancing standards. Procedia CIRP, 10, 2013, 211–215. https://doi.org/10.1016/j.procir.2013.08.033
- Fuentes, F. J.; Trouvé, V.; Cordier, J. J.; Reich, J.: Methodology for dimensional variation analysis of ITER integrated systems, Fusion Engineering and Design, 109, 2013, 315–320.
- Fuentes, F.J.; Trouvé, V.; Blessing, E.; Cordier, J.-J.; Reich, J.: Status of ITER dimensional tolerance studies, Fusion Engineering and Design, 88 (6-8), 2013, 597–601. https://doi.org/10.1016/j.fusengdes.2013.01.061
- Glancy, C. G.; Chase, K. W: A second-order method for assembly tolerance analysis, In Proceedings of the ASME design engineering technical conferences, 1999, 21–44.
- Gupta, S.; Turner, J. U.: Variational solid modeling for tolerance analysis, IEEE Computer Graphics and Applications, 13(3), 1993, 64–74. https://doi.org/10.1109/38.210493
- Hong, Y.S.; Chang, T. C.: A comprehensive review of tolerancing research, Int. J. of Production Research, 40(11), 2002, 2425–2459. https://doi.org/10.1080/00207540210128242
- ISO, International Organization for Standardization, ISO 16792:2006 Technical product documentation - Digital product definition data practices, International Organization for Standardization, Geneva, Switzerland, 2006.
- Lafond, P.; Laperrière, L.: Jacobian-based modeling of dispersions affecting pre-defined functional requirements of mechanical assemblies, In Assembly and Task Planning, Proceedings of ISATP'99, 1999, 20–25.
- Li, G.; Wang, H.; Xiong, Z.: Assembly accuracy study of large optical units in high power laser system, J Mech Eng, 51, 2015, 116–122. https://doi.org/10.3901/JME.2015.11.116
- Mao, J.; Cao, Y.: Tolerance semantics modeling based on mathematical definition, Computer-Aided Design and Applications, 8(6), 2011, 795–808, https://doi.org/10.3722/cadaps.2013.111-127 doi: 10.3722/cadaps.2011.795-808
- Pahl, G.; Beitz, W.; Schulz, H. J.; Jarecki, U.: Pahl/Beitz Konstruktionslehre: Grundlagen erfolgreicher Produktentwicklung. Methoden und Anwendung, Springer-Verlag, 2013.
- Panari, D.; Renzi, C.; Vergnano, A.; Bonazzi, E.; Leali, F: Integrated design method for optimal tolerance stack evaluation for top class automotive chassis, In Advances on Mechanics, Design Engineering and Manufacturing, 2017, 1013–1022, Springer International Publishing, https://doi.org/10.1007/978-3-319-45781-9_101
- Peroni, M.; Vergnano, A.; Leali, F.; Brentegani, A.: (2017). Design Archetype of Gears for Knowledge Based Engineering. In Advances on Mechanics, Design Engineering and Manufacturing, 2017, 1131-1140, Springer International Publishing, https://doi.org/10.1007/978-3-319-45781-9_113
- Polini W.; Marrocu, M.; D'Ambrosio, L.: Tolerance Analysis of Free-Form Surfaces in Composite Material, Journal of Computing and Information Science in Engineering, 7, 2007, 31–43, 2007. doi: 10.1115/1.2424243
- Prisco, U.; Giorleo, G.: Overview of Current CAT Systems, Integrated Computer Aided Engineering, 9(4), 2002, 373-387.
- Pyzdek T.; Keller P. A.: The six sigma handbook, 2014 (McGraw-Hill Education)
- Reich, J.; Chiocchio, S.; Cordier, J.-J.; Gallix, R.; Guerin, O.; Halcrow, T.: Three-dimensional tolerance investigation on main ITER components, Fusion Engineering and Design, 84(7–11), 2014, 1584–1587, https://doi.org/10.1016/j.fusengdes.2009.01.012
- Renzi, C.: A genetic algorithm-based integrated design environment for the preliminary design and optimization of aeronautical piston engine components, The International Journal of Advanced Manufacturing Technology, 86(9–12), 2016, 3365–3381, https://doi.org/10.1007/s00170-016-8433-7
- Renzi, C.; Leali, F.; Di Angelo, L.: A review on decision-making methods in engineering design for the automotive industry, Journal of Engineering Design, 28(2), 2017, 118–143, https://doi.org/10.1080/09544828.2016.1274720
- Ricci, F.; Bedolla, J. S.; Gomez, J. M.; Chiabert, P.: PMI: a PLM Approach for the Management of Geometrical and Dimensional Controls in Modern Industries, Computer-Aided Design and Applications, 11(sup1), 2014, S36–S43. doi: 10.1080/16864360.2014.914407
- Sahani, A.K.; Sharma, A.K.; Bajpai, J.K.: Tolerance Stack up Analysis of a Mechanical Assembly Materials Today: Proceedings, 4(2), 2017, 1459–1468, https://doi.org/10.1016/j.matpr.2017.01.168
- Salomons O.W.; van Houten, F. J. A. M.; Kals, H. J. J.: Current status of CAT Systems, Geometric Design Tolerancing: Theories, Standards and Applications, H.A. ElMaraghy ed., Chapman & Hall, London, 1998, 438–452.
- Shah, J.J.; Ameta, G.; Shen, Z.; Davidson, J.: Navigating the tolerance analysis maze, Computer-Aided Design and Applications, 4(1–6), 2007, 705–718, https://doi.org/10.1080/16864360.2007.10738504
- Shen Z.; Ameta, G.; Shah, J. J.; Davidson, J. K.: A comparative study of tolerance analysis methods, Journal of Computing and Information Science in Engineering, 2005, Vol. 5 / 247, https://doi.org/10.1115/1.1979509
- Siemens’ Tecnomatix Software https://www.plm.automation.siemens.com/it/products/tecnomatix/
- Sigmetrix’ CETOL 6σ Tolerance Analysis Software http://www.sigmetrix.com/products/cetol-tolerance-analysis-software/