References
- Forsyth, M.: Shelling and Offsetting Bodies, Proceedings of Third Symposium on Solid Modeling and Applications, 1995, 373-381. doi: 10.1145/218013.218088
- Inui, M.: Fast inverse offset computation using polygon rendering hardware, Computer-Aided Design, 35 (2), 2003, 191–201. https://doi.org/10.1016/S0010-4485(02)00052-0
- Kaneko, J.; Horio, K.: Fast Determination Method of Tool Posture for 5-Axis Control Machining Using Graphics Hardware, Journal of the Japan Society for Precision Engineering, 72(8), 2006, 1012-1017 (in Japanese).
- Kang, J.-K.; Suh, S.-H.: Machinability and set-up orientation for five-axis numerically controlled machining of free surfaces, The International Journal of Advanced Manufacturing Technology, 13 (5), 1997, 311-325. https://doi.org/10.1007/BF01178251
- Makhanov, S.S.: Adaptable geometric patterns for five-axis machining: a survey, The International Journal of Advanced Manufacturing Technology, 47 (9), 1167-1208. https://doi.org/10.1007/s00170-009-2244-z
- Moller, T; Haines E.: Real-time rendering, A K Peters, 1999.
- Morimoto, K.; Inui, M.: A GPU based Algorithm for Determining the Optimal Cutting Direction in Deep Mold Machining, Proc. of IEEE International Symposium on Assembly and Manufacturing, 2007. https://doi.org/10.1109/ISAM.2007.4288473
- Morishige, K.; Takeuchi, Y.: 5-axis control rough cutting of an impeller with efficiency and accuracy, Proc. of 1997 IEEE International Conference on Robotics and Automation, 1997, 1241-1247. https://doi.org/10.1109/ROBOT.1997.614307
- Morishige, K.; Takeuchi, Y.; Kase, K.: Tool Path Generation Using C-Space for 5-Axis Control Machining, J. Manuf. Sci. Eng., 121 (1), 1999, 144-149. https://doi.org/10.1115/1.283056 doi: 10.1115/1.2830567
- Rossignac, J.R.; Requicha, A.A.G.: Offsetting Operations in Solid Modelling, Computer Aided Geometric Design, 3(2), 1986, 129-148. https://doi.org/10.1016/0167-8396(86)90017-8
- Satoh, T.; Chiyokura, H.: Boolean Operations on Sets Using Surface Data, Proceedings of ACM Symposium on Solid Modeling Foundations and CAD/CAM Applications, 1991, 119-126. https://doi.org/10.1145/112515.112536
- Spitz, S.N.; Spyridi, A.J.; Requicha, A.A.G.: Accessibility Analysis for Planning of Dimensional Inspection with Coordinate Measuring Machines, IEEE Trans. Robotics and Automation, 15(4), 1999, 714-727. https://doi.org/10.1109/70.782025
- Takeuchi, Y.; Idemura, T.; Sata, T.: 5-axis Control Machining and Grinding Based on Solid Model, CIRP Annals - Manufacturing Technology, 40(1), 1991, 455-458. https://doi.org/10.1016/S0007-8506(07)62028-9
- Takeuchi, Y.; Watanabe, T.: Generation of 5-Axis Control Collision-Free Tool Path and Postprocessing for NC Data, CIRP Annals - Manufacturing Technology, 41(1), 1992, 539-542. https://doi.org/10.1016/S0007-8506(07)61263-3
- Tseng, Y.J.; Joshi, S.: Determining feasible tool-approach directions for machining Bézier curves and surfaces, Computer-Aided Design, 23(5), 1991, 367-379. https://doi.org/10.1016/0010-4485(91)90030-Z