Localised surface modification of high-strength aluminium–alumina metal matrix composite coatings using cold spraying and friction stir processing

References

• Mishra RS, Ma ZY, Charit I. Friction stir processing: a novel technique for fabrication of surface composite. Mater Sci Eng A. 2003;341(1–2):307–310. doi:10.1016/S0921-5093(02)00199-5.
   Web of Science ®Google Scholar
• Yang K, Li W, Niu P, et al. Cold sprayed AA2024/Al2O3 metal matrix composites improved by friction stir processing: microstructure characterization, mechanical performance and strengthening mechanisms. J Alloys Compd; 2018(736):115–123.
   Google Scholar
• Nolting AE, Larose S, Cao X, et al. Localized strength restoration of aluminum 5083 with ceramic particles via friction stir processing. Proceedings of the NATO-STO AVT-267 work. future addit. manuf. mil. hardw.; 2018; p. 1–18.
   Google Scholar
• Liu FC, Ma ZY. Achieving exceptionally high superplasticity at high strain rates in a micrograined Al-Mg-Sc alloy produced by friction stir processing. Scr Mater. 2008;59:882–885. doi:10.1016/j.scriptamat.2008.06.035
   Web of Science ®Google Scholar
• Champagne V, Helfritch D. Critical assessment 11: structural repairs by cold spray. Mater Sci Technol. 2015;31(6):627–634. doi:10.1179/1743284714Y.0000000723
   Web of Science ®Google Scholar
• Sun W, Chu X, Lan H, et al. Current implementation status of cold spray technology: a short review. J Therm Spray Tech. 2022;31(4):848–865. doi:10.1007/s11666-022-01382-4
   PubMed Web of Science ®Google Scholar
• Lee YTR, Ashrafizadeh H, Fisher G, et al. Effect of type of reinforcing particles on the deposition efficiency and wear resistance of low-pressure cold-sprayed metal matrix composite coatings. Surf Coat Technol. 2017;324:190–200. doi:10.1016/j.surfcoat.2017.05.057
   Web of Science ®Google Scholar
• Munday G, Hogan J, McDonald A. On the microstructure-dependency of mechanical properties and failure of low-pressure cold-sprayed tungsten carbide-nickel metal matrix composite coatings. Surf Coat Technol. 2020;396:125947. doi:10.1016/j.surfcoat.2020.125947
   Web of Science ®Google Scholar
• Hodder KJ, Izadi H, McDonald AG, et al. Fabrication of aluminum-alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing. Mater Sci Eng A. 2012;556:114–121. doi:10.1016/j.msea.2012.06.066
   Web of Science ®Google Scholar
• Peat T, Galloway A, Toumpis A, et al. The erosion performance of cold spray deposited metal matrix composite coatings with subsequent friction stir processing. Appl Surf Sci. 2017;396:1635–1648. doi:10.1016/j.apsusc.2016.10.156
   Web of Science ®Google Scholar
• Charit I, Mishra RS. High strain rate superplasticity in a commercial 2024 Al alloy via friction stir processing. Mater Sci Eng A. 2003;359:290–296. doi:10.1016/S0921-5093(03)00367-8
   Web of Science ®Google Scholar
• Rao D, Huber K, Heerens J, et al. Asymmetric mechanical properties and tensile behaviour prediction of aluminium alloy 5083 friction stir welding joints. Mater Sci Eng A. 2013;565:44–50. doi:10.1016/j.msea.2012.12.014
   Web of Science ®Google Scholar
• Peat T, Galloway A, Toumpis A, et al. Enhanced erosion performance of cold spray co-deposited AISI316 MMCs modified by friction stir processing. Mater Des. 2017;120:22–35. doi:10.1016/j.matdes.2017.01.099
   Web of Science ®Google Scholar
• Huang C, Li W, Zhang Z, et al. Modification of a cold sprayed SiCp/Al5056 composite coating by friction stir processing. Surf Coat Technol. 2016;296:69–75. doi:10.1016/j.surfcoat.2016.04.016
   Web of Science ®Google Scholar
• Li W, Feng Y, Planche MP, et al. Microstructural evolution and mechanical properties enhancement of a cold-sprayed Cu[sbnd]Zn alloy coating with friction stir processing. Mater Charact. 2017;125:76–82. doi:10.1016/j.matchar.2017.01.027
   Web of Science ®Google Scholar
• Travitzky N. Processing of ceramic–metal composites. Adv Appl Ceram. 2012;111(5-6):286–300. doi:10.1179/1743676111Y.0000000073
   Web of Science ®Google Scholar
• Shao C, Lo C, Bhagavathula K, et al. High strength particulate aluminum matrix composite design: synergistic strengthening strategy. Compos Commun. 2021;25:100697. doi:10.1016/j.coco.2021.100697
   Web of Science ®Google Scholar
• Kocks UF, Mecking H. Physics and phenomenology of strain hardening: the FCC case U.F. Prog Mater Sci. 2002;48:171–273. doi:10.1016/S0079-6425(02)00003-8
   Web of Science ®Google Scholar
• ASTM International. G65-16: standard test method for measuring abrasion using the dry sand / rubber wheel. ASTM Stand. 2013;04(Reapproved 2010):1–12. doi:10.1520/G0065-04R10.2
   Google Scholar
• ASTM International. ASTM b611 standard test method for determining the high stress abrasion resistance of hard. ASTM B611. 2017;13(Reapproved 2018):1–6. doi:10.1520/B0611-13.2
   Google Scholar
• ASTM E8. ASTM e8/E8M standard test methods for tension testing of metallic materials 1. Annu B ASTM Stand. 2010;4(C):1–27. doi:10.1520/E0008
   Google Scholar
• Irissou E, Legoux JG, Arsenault B, et al. Investigation of Al-Al 2O 3 cold spray coating formation and properties. J Therm Spray Technol. 2007;16:661–668. doi:10.1007/s11666-007-9086-8
   Web of Science ®Google Scholar
• Spencer K, Fabijanic DM, Zhang MX. The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys. Surf Coat Technol. 2009;204:336–344. doi:10.1016/j.surfcoat.2009.07.032
   Web of Science ®Google Scholar
• Xie X, Chen C, Chen Z, et al. Achieving simultaneously improved tensile strength and ductility of a nano-TiB2/AlSi10Mg composite produced by cold spray additive manufacturing. Compos B Eng. 2020;202:108404-1–108404-11. doi:10.1016/j.compositesb.2020.108404.
   Web of Science ®Google Scholar