References
- Milak PC, Minatto FD, Noni D, et al. Wear performance of alumina-based ceramics - a review of the influence of microstructure on erosive wear. Ceramica. 2015;61:88–103. doi:10.1590/0366-69132015613571871.
- Landek D, Ćurković L, Gabelica I, et al. Optimization of sintering process of alumina ceramics using response surface methodology. Sustainability. 2021;13:6739, doi:10.3390/su13126739.
- Ćurković L, Fudurić Jelača M, Kurajica S. Corrosion behavior of alumina ceramics in aqueous HCl and H2SO4 solutions. Corros Sci. 2008;50:872–878. doi:10.1016/j.corsci.2007.10.008.
- Grilec K, Ćurković L, Kumić I, et al. Erosion mechanisms of aluminium nitride ceramics at different impact angles. Mater Werkst. 2011;42:712–717. doi:10.1002/mawe.201100773.
- Guimaraes FFAT, Silva KL, Trombini V, et al. Correlation between microstructure and mechanical properties of Al2O3/ZrO2 nanocomposites. Ceram Int. 2009;35(2):741–745. doi:10.1016/j.ceramint.2008.02.002.
- Žmak I, Ćorić D, Mandić V, et al. Hardness and indentation fracture toughness of slip cast alumina and alumina-zirconia ceramics. Materials. 2020;13:1–17.
- Wakily H, Mehrali M, Metselaar HSC. Preparation of homogeneous dense composite of zirconia and alumina (ZTA) using colloidal filtration. World Acad Sci Eng Technol. 2010;46:140–145.
- Sun L, Sneller A, Kwon P. Fabrication of alumina/zirconia functionally graded material: from optimization of processing parameters to phenomenological constitutive models. Mater Sci Eng A. 2008;488:31–38. doi:10.1016/j.msea.2007.10.044.
- Zhang Y, Sun MJ, Zhang D. Designing functionally graded materials with superior load-bearing properties. Acta Biomater. 2012;8:1101–1108. doi:10.1016/j.actbio.2011.11.033.
- Pulgarin HLC, Garrido LB, Albano MP. Comparison of different zirconia powders for slip casting of alumina–zirconia ceramics. Adv Appl Ceram. 2013;112:39–45. doi:10.1179/1743676112Y.0000000051.
- Montedo ORK, Milak PC, Faller CA, et al. Effect of LZSA glass-ceramic addition on the erosive wear of pressureless sintered alumina. REM Int Eng J. 2020;73:179–188. doi:10.1590/0370-44672019730024.
- Desale GR, Gandhi BK, Jain SC. Effect of erodent properties on erosion wear of ductile type materials. Wear. 2006;261:914–921. doi:10.1016/j.wear.2006.01.035.
- Kosel TH. Solid particle erosion. In: ASM handbook: friction, lubrication, and wear technology. vol. 18, Materials Park (OH): ASM International; 1992. p. 199–211.
- Bhushan B. Introduction to tribology. New York: John Wiley and Sons; 2002.
- Ragav P, Panakarajupally RP, Mirza F, et al. Solid particle erosion behavior of melt-infiltrated SiC/SiC ceramic matrix composites (CMCs) in a simulated turbine engine environment. Composites Part B. 2021;216:108860, doi:10.1016/j.compositesb.2021.108860.
- Chinn RE. Ceramography: preparation and analysis of ceramic microstructures. ASM International; 2002.
- Ćurković L, Kumić I, Grilec K. Solid particle erosion behaviour of high purity alumina ceramics. Ceram Inter. 2011;37:29–35. doi:10.1016/j.ceramint.2010.08.029.
- Fang M, Liu F, Min X, et al. Effect of temperature on solid particle impact erosion wear mechanism of 5mol% Yttria Stabilized Zirconia ceramics. Ceram Int. 2015;41(5):6807–6811. doi:10.1016/j.ceramint.2015.01.128.
- Tang H, Fang M, Min X, et al. Mechanical properties and solid particle erosion behavior of LaMgAl11O19-Al2O3 ceramic at room and elevated temperatures. J Am Ceram Soc. 2016;99(6):2138–2146. doi:10.1111/jace.14205.
- Hsu SM, Shen M. Wear prediction of ceramics. Wear. 2004;256:867–878. doi:10.1016/j.wear.2003.11.002.
- Wiederhorn SM, Hockey BJ. Effect of material parameters on the erosion resistance of brittle materials. J Mater Sci. 1983;18:766–780. doi:10.1007/BF00745575.
- Zhang Y, Cheng YB, Lathabai S. Erosion of alumina ceramics by air and water-suspended garnet particles. Wear. 2000;240:40–51. doi:10.1016/S0043-1648(00)00335-5.
- Gopi KR, Nagarajan R, Rao SS, et al. Erosion model on alumina ceramics: a retrospection, validation and refinement. Wear. 2008;264:211–218. doi:10.1016/j.wear.2007.03.002.
- Meng HC, Ludema KC. Wear models and predictive equations: their form and content. Wear. 1995;181–183:443–457.
- Oka YI, Ohnogi H, Honogi T, et al. The impinging angle dependence of erosion damage caused by solid particle impact. Wear. 1997;203–204:573–579.
- Hossen MM, Chowdhury FUZ, Gafur MA, et al. Effect of zirconia substitution on structural and mechanical properties of ZTA composites. J Mech Civ Eng. 2014;11:01–07.
- Naglieri V, Palmero P, Montanaro L, et al. Elaboration of alumina-zirconia composites: role of the zirconia content on the microstructure and mechanical properties. Materials. 2013;6:2090–2102. doi:10.3390/ma6052090.
- Moraes MCCSB, Elias CN, Filho JD, et al. Mechanical properties of alumina-zirconia composites for ceramic abutments. Mater Res. 2004;7:643–649. doi:10.1590/S1516-14392004000400021.
- Latella BA, O'Connor BH. Effect of porosity on the erosive wear of liquid-phase-sintered alumina ceramics. J Am Ceram Soc. 1999;82:2145–2149. doi:10.1111/j.1151-2916.1999.tb02054.x.