Wear behaviour of alumina-toughened-zirconia composites with different phase arrangement under ball-on-flat tribological tests

References

• Liang Y, Dutta SP. Application trend in advanced ceramic technologies. Technovation. 2001;21:61–65. doi:10.1016/S0166-4972(00)00019-5
   Web of Science ®Google Scholar
• Begand S, Glien W, Oberbach T. ATZ – A new material with a high potential in joint replacement. Key Eng. Mater. 2005;284–286:983–986. doi:10.4028/www.scientific.net/KEM.284-286.983
   Google Scholar
• Duraccio D, Strongone V, Malucelli G, et al. The role of alumina-zirconia loading on the mechanical and biological properties of UHMWPE for biomedical applications. Compos. Part B Eng. 2019;164:800–808. doi:10.1016/j.compositesb.2019.01.097
   Web of Science ®Google Scholar
• Tuan WH, Chen RZ, Wang TC, et al. Mechanical properties of Al2O3/ZrO2 composites. J. Eur. Ceram. Soc. 2002;22:2827–2833. doi:10.1016/S0955-2219(02)00043-2
   Web of Science ®Google Scholar
• Bartolomé JF, Pecharromán Moya JS, Martin A, et al. Percolative mechanism of sliding wear in alumina/zirconia composites. J. Eur. Ceram. Soc. 2006;26:2619–2625. doi:10.1016/j.jeurceramsoc.2005.05.008
   Web of Science ®Google Scholar
• Zhou Z, Wang Z, Yi Y, et al. Tribological characteristics in dry friction environment of zirconia-alumina composites with or without layered structure. Ceram. Int. 2014;40:13139–13144. doi:10.1016/j.ceramint.2014.05.017
   Web of Science ®Google Scholar
• Naglieri V, Palmero P, Montanaro L, et al. Elaboration of alumina-zirconia composites: role of the zirconia content on the microstructure and mechanical properties. Materials (Basel). 2013;6:2090–2102. doi:10.3390/ma6052090
   PubMed Web of Science ®Google Scholar
• Casellas D, Ràfols I, Llanes L, et al. Fracture toughness of zirconia–alumina composites. Int J Refract Met Hard Mater. 1999;17:11–20. doi:10.1016/S0263-4368(98)00064-X
   Web of Science ®Google Scholar
• Strey NF, Scandian C. Tribological transitions during sliding of zirconia against alumina and ZTA in water. Wear. 2017;376:343–351. doi:10.1016/j.wear.2016.12.014
   Web of Science ®Google Scholar
• Maji A, Choubey G. Microstructure and mechanical properties of alumina toughened zirconia (ATZ). Mater. Today Proc. 2018;5:7457–7465. doi:10.1016/j.matpr.2017.11.417
   Google Scholar
• Taya M, Hayashi S, Kobayashi AS, et al. Toughening of a particulate-reinforced ceramic-matrix composite by thermal residual stress. J. Am. Ceram. Soc. 1990;73:1382–1391. doi:10.1111/j.1151-2916.1990.tb05209.x
   Web of Science ®Google Scholar
• Grabowski G, Pędzich Z. Residual stresses in particulate composites with alumina and zirconia matrices. J. Eur. Ceram. Soc. 2007;27:1287–1292. doi:10.1016/j.jeurceramsoc.2006.04.096
   Web of Science ®Google Scholar
• Lin GY, Virkar A. Development of surface compressive stresses in zirconia–alumina composites by an ion-exchange process. J. Am. Ceram. Soc. 2001;84:1321–1326. doi:10.1111/j.1151-2916.2001.tb00836.x
   Web of Science ®Google Scholar
• Danilenko I, Konstantinova T, Volkova G, et al. The role of powder preparation method in enhancing fracture toughness of zirconia ceramics with low alumina amount. J. Ceram. Sci. Technol. 2015;6:191–200.
   Web of Science ®Google Scholar
• Abbas MKG, Ramesh S, Sara Lee KY, et al. Effects of sintering additives on the densification and properties of alumina-toughened zirconia ceramic composites. Ceram. Int. 2020;46:27539–27549. doi:10.1016/j.ceramint.2020.07.246
   Web of Science ®Google Scholar
• Grabowy M, Wilk A, Lach R, et al. Hydrothermal aging of ATZ composites based on zirconia made of powders with different yttria content. Materials (Basel). 2021;14:6418. doi:10.3390/ma14216418
   PubMed Web of Science ®Google Scholar
• Nevarez-Rascon A, Aguilar-Elguezabal A, Orrantia E, et al. On the wide range of mechanical properties of ZTA and ATZ based dental ceramic composites by varying the Al2O3 and ZrO2 content. Int J Refract Met Hard Mater. 2009;27:962–970. doi:10.1016/j.ijrmhm.2009.06.001
   Web of Science ®Google Scholar
• Shekhawat D, Singh A, Patnaik A. Tribo-behaviour of biomaterials for hip arthroplasty. Mater. Today Proc. 2021;44:4809–4815. doi:10.1016/j.matpr.2020.11.420
   Google Scholar
• Grabowy M, Maciewicz K, Łuszcz M, et al. Mechanical properties of ATZ-type composites obtained in the sintering process of zirconia powders with different chemical composition. Ceram. Mater. 2019;71:286–294.
   Google Scholar
• Grabowy M, Wojteczko K, Wojteczko A, et al. The abrasive wear susceptibility of innovative ATZ type composites produced by sintering mix of zirconia powders with different chemical composition. Compos. Theory Pract. 2020;20:11–16.
   Web of Science ®Google Scholar
• ISO 20808. Standard. determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method. Geneva: International Organization for Standardization; 2016.
   Google Scholar
• Chevalier J, Liens A, Reveron H, et al. Forty years after the promise of «ceramic steel?»: zirconia-based composites with a metal-like mechanical behavior. J. Am. Ceram. Soc. 2020;103:1482–1513. doi:10.1111/jace.16903
   Web of Science ®Google Scholar