82
Views
0
CrossRef citations to date
0
Altmetric
Research Articles

Performance evaluation of post-grouting for bored piles installed in inhomogeneous gravel pebble stratum overlaid by deep and soft soil layers

, , ORCID Icon &
Pages 77-95 | Received 26 Aug 2022, Accepted 10 Feb 2023, Published online: 24 Feb 2023

References

  • American Petroleum Institute, 2007. RP2AWSD-2000: recommended practice for planning, designing and constructing fixed offshore platforms—working stress design. Instituto Mexicanos Del Petroleo.
  • Bruce, D.A., 1986. Enhancing the performance of large diameter piles by grouting. Ground Engineering, 19 (4), 9–15.
  • Cai, J., et al., 2012. Evaluation on bearing capacity improvement of cast-In Situ bored piles using post-grouting technology. Applied Mechanics and Materials, 204, 168–172. http://www.scientific.net/doi:10.4028/AMM.204-208.168
  • Dapp, S.D., Muchard, M., and Brown, D.A., 2006. Experiences with base grouted drilled shafts in the southeastern United States. In Proceedings of the 10th International Conference on Piling and Deep Foundations, Amsterdam, The Netherlands - Peterborough, 1553–1562.
  • DNV-OS-J101, 2007. Design of Offshore wind turbine structures. Revision Proposal.
  • Dai, G.L., et al., 2018a. Calculation of bearing capacity for combined post-grouting bored piles based on settlement control. Chinese Journal of Geotechnical Engineering, 40 (12), 2172–2181. [in Chinese].
  • Dai, G.L., et al., 2018b. The model of grout migration height for pressured grouting at pile tip based on time-dependent behavior of viscosity and its engineering application. Rock and Soil Mechanics, 39 (8), 2941–2950. [in Chinese].
  • Fattah, M.Y. and Salman, F.A., 2004. Reinforcement requirements in bored piles based on finite element analysis. International Conference on Geotechnical Engineering, University of Sharjah, Sharjah, UAE, 202–210.
  • Fang, K., et al., 2014. Prestressing effect evaluation for a grouted shaft: a case study. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 167 (3), 253–261. doi:10.1680/geng.11.00090.
  • Fattah, M.Y. and Al-Soudani, W.H., 2016. Bearing capacity of closed and open ended pipe piles installed in loose sand with emphasis on soil plug. Indian Journal of Geo-Marine Science, 45 (5), 703–724. doi:10.1080/17445302.2015.1030247.
  • Fattah, M.Y., Al-Omari, R.R., and Fadhil, S.H., 2020. Load sharing and behavior of single pile embedded in unsaturated swelling soil. European Journal of Environmental and Civil Engineering, 24 (12), 1967–1992. doi:10.1080/19648189.2018.1495105.
  • Fattah, M.Y., Salim, N.M., and Al-Gharrawi, A.M., 2020. Effect of soil plug removal on the load-carrying capacity of symmetric and non-symmetric pile groups. Ships and Offshore Structures, 15 (9), 911–933. doi:10.1080/17445302.2019.1694298.
  • JGJ 106, 2014. Technical code for testing of building foundation piles (English version). China Architecture & Building Press.
  • JTG 3363, 2019. Specifications for design of foundation of highway bridges and culverts (English version). Industry Standard of the People’s Republic of China, .
  • Liu, J.L., Gao, W.S., and Zhu, J.C., 1998. Bearing capacity and engineering application of post grouting pile. In: China academic report on the new progress and new norms of underground structures in engineering construction, Hangzhou, in Chinese, 62–79.
  • Liu, L.M., Shu, X., and Neng, J.H., 2002. Theoretical progress and engineering practice of pile foundation engineering. Beijing: Chinese building materials industry publication. in Chinese.
  • Li, Y.H., Zhu, X., and Zhou, T.H., 2016. Experimental study of effects of pile tip post grouting on bearing characteristics of large-diameter bored pile. Rock and Soil Mechanics, 37 (S2), 388–396. [in Chinese].
  • Kog, Y.C., 2009. Integrity problem of large-diameter bored piles. Journal of Geotechnical and Geoenvironmental Engineering, 135 (2), 237–245. doi:10.1061/(ASCE)1090-0241(2009)135:2(237).
  • Mullins, G., Dapp, S.D., and Lai, P., 2000. Pressure-grouting drilled shaft tips in sand. Geotechnical Special Publication, 1–17.
  • Mullins, G., Winters, D., and Dapp, S., 2006. Predicting end bearing capacity of post-grouted drilled shaft in cohesionless soils. Journal of Geotechnical and Geoenvironmental Engineering, 132 (4), 478–487. doi:10.1061/(ASCE)1090-0241(2006)132:4(478).
  • Ruiz, M.E., 2005. Study of Axially Loaded Post Grouted Drilled Shafts Using CPT Based Load Transfer Curves. Ph.D. Thesis. University of Puerto Rico.
  • Ruiz, M.E. and Pando, M.A., 2009. Load transfer mechanisms of tip post-grouted drilled shafts in sand. Proceedings of International Foundation Congress and Equipment Expo: Contemporary Topics in Deep Foundation, Orlando, FL23–30.
  • Ruan, W.L., 2014. The Research on Post-grouting Cement to Increase the Load Capacity for Bored Pile. Thesis (PhD). Jilin University. (in Chinese)
  • Shi, P.D., 2004. Special technical problems in deep foundation engineering. Beijing: China Communications Press. in Chinese.
  • Stocker, M., 1983. The influence of post grouting on the load bearing capacity of bored piles. Proceedings of the 8th European Conference on Soil Mechanics and Foundation Engineering, Helsiniki: Balkema, 167–170.
  • Tan, Y., et al., 2017. Post-grouting of long bored piles in clay. Grouting, 2017, 338–347. in Chinese.
  • Thiyyakkandi, S., et al., 2013. Measured and predicted response of a new jetted and grouted precast pile with membranes in cohesionless soils. Journal of Geotechnical and Geoenvironmental Engineering, 139 (8), 1334–1345. doi:10.1061/(ASCE)GT.1943-5606.0000860.
  • Thiyyakkandi, S., et al., 2014. Experimental study, numerical modeling of and axial prediction approach to base grouted drilled shafts in cohesionless soils. Acta Geotechnica, 9 (3), 439–454. doi:10.1007/s11440-013-0246-3.
  • Wang, X. and Yu, Z.Q., 1998. Using base compaction grouting to enhance bearing capacity of bored pile. Building Structure, 11, 6–8. in Chinese.
  • Wan, Z.H., Dai, G.L., and Gong, W.M., 2018a. Calculation and analysis of load transfer in large-diameter grouted pile in extra-thick fine sand layers. Rock and Soil Mechanics, 39 (4), 1386–1394. [in Chinese].
  • Wan, Z.H., Dai, G.L., and Gong, W.M., 2018b. Full-scale load testing of two large-diameter drilled shafts in coral-reef limestone formations. Bulletin of Engineering Geology and the Environment, 77 (3), 1127–1143. doi:10.1007/s10064-017-1206-1.
  • Wan, Z.H., Dai, G.L., and Gong, W.M., 2019. Field study on post-grouting effects of cast-in-place bored piles in extra-thick fine sand layers. Acta Geotechnica, 14 (5), 1357–1377. doi:10.1007/s11440-018-0741-7.
  • Wan, Z.H., 2019. Research on enhancement mechanism of bearing capacity of large-diameter post-grouted piles and design method based on settlement criterion. Ph.D. thesis, Southeast University, China.(in Chinese)
  • Wen, L., et al., 2020. Field tests on axial behavior of grouted steel pipe micropiles in marine soft clay. International Journal of Geomechanics, 20 (6), 06020006. doi:10.1061/(ASCE)GM.1943-5622.0001656.
  • Wu, J.B. and Wang, W.D., 2007. Estimate of the reasonable quantity of grouting and the bearing capacity of post base-grouted bored pile. Building Structure, 37 (5), 114–129. [in Chinese].
  • Xu, G.M., et al., 2008. A hydraulic pressure model on limiting the bearing capacity of the single pile by post grouting. Mechanics in Engineering, 30 (5), 79–81. [in Chinese].
  • Yang, X.Q., 2002. Pile foundation static pressure test study. Beijing: China Railway Publishing House. in Chinese.
  • Zhang, J.M., Wang, N., and Guan, D.Z., 2003. Computation of the ultimate bearing capacity of single-pile by grouting at the bottom. Soil Engineering and Foundation, 17 (2), 34–35.
  • Zhang, Z.M., et al., 2009. Test study on the characteristics of mudcakes and in situ soils around bored piles. Canadian Geotechnical Journal, 46 (3), 241–255. doi:10.1139/T08-119.
  • Zou, J.F., Yang, T., and Deng, D.P., 2019. Field test of the long-term settlement for the post-grouted pile in the deep-thick soft soil. Geomechanics & Engineering, 19 (2), 115–126.
  • JGJ 94, 2008. Technical Code for Building Pile Foundations (English version). Beijing: China Architecture & Building Press.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.