Tribo-mechanical performance of brake composite material: a comprehensive review

References

• Menapace C, Leonardi M, Matějka V, et al. Dry sliding behavior and friction layer formation in copper-free barite containing friction materials. Wear. 2018;398–399:191–200.
   Web of Science ®Google Scholar
• Raj JS, Christy TV, Gnanaraj SD, et al. Influence of calcium sulfate whiskers on the tribological characteristics of automotive brake friction materials. Eng Sci Techn Int J. 2020;23(2):445–451.
   Google Scholar
• Blau PJ, McLaughlin JC. Effects of water films and sliding speed on the frictional behavior of truck disc brake materials. Tribol Int. 2003;36(10):709–715.
   Web of Science ®Google Scholar
• Chang YH, Soo Joo B, Lee SM, et al. Size effect of tire rubber particles on tribological properties of brake friction materials. Wear. 2018;394:80–86.
   Web of Science ®Google Scholar
• Sugözü B. Tribological properties of brake friction materials containing fly ash. Indust Lubric Tribol. 2018.
   Google Scholar
• Marin E, Daimon E, Boschetto F, et al. Diagnostic spectroscopic tools for worn brake pad materials: a case study. Wear. 2019;432:202969.
   Web of Science ®Google Scholar
• Szymański P, Czarnecka-Komorowska D, Gawdzińska K, et al. A review of composite materials used in brake disc pad manufacturing process. Compos Theor Pract. 2020;20.
   Web of Science ®Google Scholar
• Kumar VV, Senthil Kumaran S, Dhanalakshmi S, et al. Tribological performance evaluation of fused mullite-reinforced hybrid composite brake pad for defence application. J. Brazil Soc Mech Sci Eng. 2019;41(4):1–10.
   Web of Science ®Google Scholar
• Dai E, Li G, Lu G, et al. Tribological behavior and wear mechanism of Cu/CF/phenolic resin sandwich composites under current. J Ind Text. 2020: 1528083720966697.
   Web of Science ®Google Scholar
• Padhan M, Marathe U, Bijwe J. Surface topography modification, film transfer and wear mechanism for fibre reinforced polymer composites – an overview. Surf Topogr: Metrol Prop. 2020.
   Web of Science ®Google Scholar
• Allen LP, Baez J, Stern MEC, et al. Trends and the economic effect of asbestos bans and decline in asbestos consumption and production worldwide. Int J Environ Res Public Health. 2018;15(3):531.
   PubMed Web of Science ®Google Scholar
• Orna, Mary Virginia. Carotenoids, cochineal, and copper: food coloring through the ages. In Chemistry’s role in food production and sustainability: past and present, American Chemical Society, 2019, p. 85–109.
   Google Scholar
• Gweon JH, Soo Joo B, Jang H. The effect of short glass fiber dispersion on the friction and vibration of brake friction materials. Wear. 2016;362-363:61–67.
   Web of Science ®Google Scholar
• Mahale V, Bijwe J, Sinha S. Efforts towards green friction materials. Tribol Int. 2019;136:196–206.
   Web of Science ®Google Scholar
• Saindane UV, Soni S, Menghani JV. Recent research status on modern friction materials-an overview. IOP Conf Ser Mater Sci Eng; 2020. 810(1): 012067. IOP Publishing,
   Google Scholar
• He X, Yang K, Ji X, et al. Research on vehicle stability control strategy based on integrated-electro-hydraulic brake system. No. 2017-01-1565. SAE Technical Paper, 2017.
   Google Scholar
• Anselma PG, Patil SP, Belingardi G. Rapid optimal design of a light vehicle hydraulic brake system. No. 2019-01-0831. SAE Technical Paper, 2019.
   Google Scholar
• Sharma RC, Dhingra M, Pathak RK. Networking-human area network. Int J Eng Res Techn. 2015;04(1):206–213.
   Google Scholar
• Qiang ZHU, Yi LU, Bin GUO, et al. Model of output pressure for Air brake system in passenger car. Chinese Hydr Pneum. 2015;02:27.
   Google Scholar
• Chopra V. Design and FE analysis of a permanent-magnet synchronizer brake. No. 2017-01-2455. SAE Technical Paper, 2017.
   Google Scholar
• Anantha Krishna GL, Sathish Kumar KM. Investigation on eddy current braking systems – a review. In Applied mechanics and materials, vol. 592; Trans Tech Publications; 2014. p. 1089–1093.
   Google Scholar
• Wahlström J, Leonardi M, Tu M, et al. A study of the effect of brake pad scorching on tribology and airborne particle emissions. Atmosphere (Basel). 2020;11(5 ):488.
   Web of Science ®Google Scholar
• Walia MS. Towards enhanced mechanical braking systems for trains. Göteborg: Chalmers University of Technology; 2017.
   Google Scholar
• Chowdary VL, Nageswara Rao NA. Design & analysis of a disc brake using Fea. IJCER Online.
   Google Scholar
• Bhane AB, Salodkar SM, Ramani HB. Braking system approaching towards the betterment and it’s consequences. Int Res J Advan Sci Hub. 2020;2:64–70.
   Google Scholar
• Belhocine A, Abu Bakar AR, Bouchetara M. Thermal and structural analysis of disc brake assembly during single stop braking event. Aust J. Mech Eng. 2016;14(1):26–38.
   Web of Science ®Google Scholar
• Bandiera M, Mauri A, Bestetti M, et al. Corrosion phenomena in braking systems. In CORROSION 2020. OnePetro, 2020.
   Google Scholar
• Vontorová J, Mohyla P. Use of GDOES method for evaluation of the quality and thickness of hot dip galvanised coating. Trans IMF. 2018;96(6):313–318.
   Web of Science ®Google Scholar
• Shen X, Lu L, Zeng D. Fatigue failure analysis of high strength bolts used for high-speed railway vehicle braking discs. Eng Fail Anal. 2020;115:104661.
   Web of Science ®Google Scholar
• Towoju OA. Braking pattern impact on brake fade in an automobile brake system. 2019.
   Google Scholar
• Radhakrishnan C, Yokeswaran K, Vengadeshprasadh M, et al. Design and analysis of disc brake with titanium alloy. Int J Innov Sci Eng Techn. 2015;2(5):1044–1050.
   Google Scholar
• Borawski A. Conventional and unconventional materials used in the production of brake pads–review. Sci Eng Compos Mater. 2020;27(1):374–396.
   Web of Science ®Google Scholar
• Bashir M, Qayoum A, Saleem SS. Influence of lignocellulosic banana fiber on the thermal stability of brake pad material. Mater Res Express. 2019;6(11):115551.
   Web of Science ®Google Scholar
• Manoharan S, Vijay R, Singaravelu DL, et al. Experimental investigation on the tribo-thermal properties of brake friction materials containing various forms of graphite: a comparative study. Arab J Sci Eng. 2019;44(2):1459–1473.
   Web of Science ®Google Scholar
• Kumar VV, Senthil Kumaran S. Friction material composite: types of brake friction material formulations and effects of various ingredients on brake performance – a review. Mater Res Express. 2019;6(8):0082005.
   Web of Science ®Google Scholar
• Ahmadijokani F, Shojaei A, Dordanihaghighi S, et al. Effects of hybrid carbon-aramid fiber on performance of non-asbestos organic brake friction composites. Wear. 2020;452-453:203280.
   Web of Science ®Google Scholar
• Yelle DJ, Ralph J. Characterizing phenol–formaldehyde adhesive cure chemistry within the wood cell wall. Int J Adhes Adhes. 2016;70:26–36.
   Web of Science ®Google Scholar
• Cheng Y, Sui G, Liu H, et al. Preparation of highly phenol substituted bio-oil-phenol-formaldehyde adhesives with enhanced bonding performance using furfural as crosslinking agent. J Appl Polym Sci. 2019;136(4):46995.
   Web of Science ®Google Scholar
• Wei C, Zeng M, Xiong X, et al. Friction properties of sisal fiber/nano-silica reinforced phenol formaldehyde composites. Polym Compos. 2015;36(3):433–438.
   Web of Science ®Google Scholar
• Singh T, Patnaik A. Performance assessment of lapinus–aramid based brake pad hybrid phenolic composites in friction braking. Arch Civ Mech Eng. 2015;15(1):151–161.
   Web of Science ®Google Scholar
• Österle W, Dmitriev AI. The role of solid lubricants for brake friction materials. Lubricants. 2016;4(1 ):5.
   Google Scholar
• Cumberlidge P. Lubrication of propulsion systems and gearboxes. Encyclop Marit Offshore En. 2017: 1–8.
   Google Scholar
• Masotti D, Ferreira N, Neis P, et al. Evaluation of creep groan phenomena of brake Pad materials using different abrasive particles. No. 2014-01-2518. SAE Technical Paper, 2014.
   Google Scholar
• Singh T, Kumar N, Grewal JS, et al. Natural fiber reinforced non-asbestos brake friction composites: influence of ramie fiber on physico-mechanical and tribological properties. Mater Res Express. 2019;6(11):115701.
   Web of Science ®Google Scholar
• Maulana IT, Surojo E, Muhayat N, et al. Frictional characteristics of friction brake material using Cantala fibers as reinforcement. Tribol Online. 2018;13(4):188–194.
   Web of Science ®Google Scholar
• Prabhu TR, Varma VK, Vedantam S. Tribological and mechanical behavior of multilayer Cu/SiC + Gr hybrid composites for brake friction material applications. Wear. 2014;317(1-2):201–212.
   Web of Science ®Google Scholar
• Ali MKA, Xianjun H. M50 matrix sintered with nanoscale solid lubricants shows enhanced self-lubricating properties under dry sliding at different temperatures. Tribol Lett. 2019;67(3):1–16.
   Web of Science ®Google Scholar
• Shinde D, Bulsara M, Mistry KN. Tribological performance of non-asbestos brake friction material in contact with brake disc of varying topography. Ind Lubr Tribol. 2020.
   Web of Science ®Google Scholar
• Vijay R, Singaravelu DL. Tribological characterization of different mesh-sized natural barite-based copper-free brake friction composites. In Tribology of polymer composites. Elsevier, 2021, p. 279–300.
   Google Scholar
• Gawande SH, Banait AS, Balashowry K. Study on wear analysis of substitute automotive brake pad materials. Aust J Mech Eng. 2020: 1–10.
   Web of Science ®Google Scholar
• Vijay R, Manoharan S, Nagarajan S. Influence of premixed dual metal sulfides on the tribological performance of copper-free brake friction materials. Ind Lubr Tribol. 2020.
   Google Scholar
• Idris UD, Aigbodion VS, Abubakar IJ, et al. Eco-friendly asbestos free brake-pad: using banana peels. J King Saud Univ Eng Sci. 2015;27(2):185–192.
   Google Scholar
• Krishnan GS, Kumar S, Suresh G, et al. Role of metal composite alloys in non-asbestos brake friction materials – a solution for copper replacement. Mater Today Proc. 2020.
   PubMedGoogle Scholar
• Wang D, Yin J, Zhu Z, et al. Preparation of high friction brake shoe material and its tribological behaviors during emergency braking in ultra-deep coal mine hoist. Wear. 2020;458-459:203391.
   Web of Science ®Google Scholar
• Kim S-H, Shim W, Kwon S-U, et al. The impact of composition in Non-steel and low-steel type friction materials on airborne brake wear particulate emission. Tribol Lett. 2020;68(4):1–13.
   Web of Science ®Google Scholar
• Tomar BS, Ali S, Ellis K, et al. A comparative study on-dynamometer performance evaluation of fly ash containing non ferrous organic and low-metallic disc brake pads for passenger vehicles and thereby promoting a very cheap inorganic filler available in abundance. No. 2020-01-1613. SAE Technical Paper, 2020.
   Google Scholar
• Durowaye S, Sekunowo O, Lawal G. Physical and mechanical characterisation of asbestos-free particulate ceramic matrix composites. Eskişehir Techn Univ J Sci Techn A Appl Sci Eng; 21(4):562–574.
   Google Scholar
• Wang X, Bao J, Liu J, et al. Preparation and optimization of a soft magnetic brake friction material based on permalloy additive. Ind Lubr Tribol. 2021.
   Web of Science ®Google Scholar
• Van Rensselar J. Stop it!. Tribol Lubr Tech. 2014;70(6):46.
   Google Scholar
• Gadow R, Weichand P, Jiménez M. Process technology, applications and thermal resistivity of basalt fiber reinforced SiOC composites. Ceramics. 2019;2(2 ):298–307.
   Google Scholar
• Valiei M. Improving tribological and mechanical properties of copper-based friction materials for brake pad applications, 2020.
   Google Scholar
• Österle W, Deutsch C, Gradt T, et al. Tribological screening tests for the selection of raw materials for automotive brake pad formulations. Tribol Int. 2014;73:148–155.
   Web of Science ®Google Scholar
• Grigoratos T, Martini G. Brake wear particle emissions: a review. Environ Sci Poll Res. 2015;22(4):2491–2504.
   PubMed Web of Science ®Google Scholar
• Sweet GA, Brochu M, Hexemer RL, et al. Consolidation of aluminum-based metal matrix composites via spark plasma sintering. Mater Sci Eng A. 2015;648:123–133.
   Web of Science ®Google Scholar
• Vigithra R, Hariharan S, Tamilselvan M, et al. Comparative study and analysis of brake shoe lining using composite material by Ansys14. Young. 2018;185(185 ):186.
   Google Scholar
• Wang F, Liu Y. Mechanical and tribological properties of ceramic-matrix friction materials with steel fiber and mullite fiber. Mater Des. 2014;57:449–455.
   Web of Science ®Google Scholar
• Kinnunen H, Hebbink G, Peters H, et al. An investigation into the effect of fine lactose particles on the fluidization behaviour and aerosolization performance of carrier-based dry powder inhaler formulations. Aaps Pharmscitech. 2014;15(4):898–909.
   PubMed Web of Science ®Google Scholar
• Neis PD, Ferreira NF, Da Silva FP. Comparison between methods for measuring wear in brake friction materials. Wear. 2014;319(1-2):191–199.
   Web of Science ®Google Scholar
• Singh T, Patnaik A, Chauhan R. Optimization of tribological properties of cement kiln dust-filled brake pad using grey relation analysis. Mater Des. 2016;89:1335–1342.
   Web of Science ®Google Scholar
• Fan S, Yang C, He L, et al. Progress of ceramic matrix composites brake materials for aircraft application. Rev. Adv. Mater. Sci. 2016;44:313–325.
   Web of Science ®Google Scholar
• Yevtushenko AA, Grzes P, Adamowicz A. The temperature mode of the carbon-carbon multi-disc brake in the view of the interrelations of its operating characteristics. Mater (Basel). 2020;13(8):1878.
   PubMed Web of Science ®Google Scholar
• Cai Y, Fan S, Yin X, et al. Microstructures and mechanical properties of three-dimensional ceramic filler modified carbon/carbon composites. Ceram Int. 2014;40(1):399–408.
   Web of Science ®Google Scholar
• Singh T, Tiwari A, Patnaik A, et al. Influence of wollastonite shape and amount on tribo-performance of non-asbestos organic brake friction composites. Wear. 2017;386-387:157–164.
   Web of Science ®Google Scholar
• Manoharan S, Sai Krishnan G, Ganesh Babu L, et al. Synergistic effect of red mud-iron sulfide particles on fade-recovery characteristics of non-asbestos organic brake friction composites. Mater Res Express. 2019;6(10):105311.
   Web of Science ®Google Scholar
• Liew KW, Nirmal U. Frictional performance evaluation of newly designed brake pad materials. Mater Des. 2013;48:25–33.
   Web of Science ®Google Scholar
• Singh T, Patnaik A, Chauhan R. Performance assessment of phenolic-based Non-asbestos organic brake friction composite materials with different abrasives. Acta Polytechnica Hungarica. 2020;17(5).
   Web of Science ®Google Scholar
• Thiyagarajan V, Kalaichelvan K, Vijay R, et al. Influence of thermal conductivity and thermal stability on the fade and recovery characteristics of non-asbestos semi-metallic disc brake pad. J Brazil Soc Mechan Sci Eng. 2016;38(4):1207–1219.
   Web of Science ®Google Scholar
• Vijay R, Singaravelu DL, Jayaganthan R. Development and characterization of stainless steel fiber-based copper-free brake liner formulation: a positive solution for steel fiber replacement. Friction. 2019: 1–25.
   Web of Science ®Google Scholar
• Mahale V, Bijwe J, Sinha S. A step towards replacing copper in brake-pads by using stainless steel swarf. Wear. 2019;424-425:133–142.
   Web of Science ®Google Scholar
• Sathickbasha K, Selvakumar AS, Sai Balaji MA, et al. Tribo performance of brake friction composite with stainless steel fiber. In Advances in materials and metallurgy, Singapore: Springer; 2019. p. 159–169.
   Google Scholar
• SUGÖZÜ B, Behcet D. Friction and wear of automotive brake lining materials containing steel wool.
   Google Scholar
• Sinha A, Ischia G, Menapace C, et al. Experimental characterization protocols for wear products from disc brake materials. Atmosphere (Basel). 2020;11(10):1102.
   Web of Science ®Google Scholar
• Yanar H, Purcek G, Ayar HH. Effect of steel fiber addition on the mechanical and tribological behavior of the composite brake pad materials. IOP Conf Ser Mater Sci Eng; 2020.
   Google Scholar
• Lessing J, Morin SA, Keplinger C, et al. Stretchable conductive composites based on metal wools for use as electrical vias in soft devices. Adv Funct Mater. 2015;25(9):1418–1425.
   Web of Science ®Google Scholar
• Straffelini G, Ciudin R, Ciotti A, et al. Present knowledge and perspectives on the role of copper in brake materials and related environmental issues: A critical assessment. Environ Pollut. 2015;207:211–219.
   PubMed Web of Science ®Google Scholar
• Wei L, Choy YS, Cheung CS, et al. Tribology performance, airborne particle emissions and brake squeal noise of copper-free friction materials. Wear. 2020;448-449:203215.
   Web of Science ®Google Scholar
• Ahmed KA, Rasool Mohideen S, Balaji MAS, et al. Tribological performance of brass powder with different copper and zinc content in the brake pad. Tribol Indus. 2020;42(2).
   Google Scholar
• Peng T, Yan Q, Li G, et al. The influence of Cu/Fe ratio on the tribological behavior of brake friction materials. Tribol Lett. 2018;66(1):1–12.
   Web of Science ®Google Scholar
• Kumar KN, Suman KNS. Review of brake friction materials for future development. J Mech Mech Eng. 2017;3:1–29.
   Google Scholar
• Chen B, Yang J, Zhang Q, et al. Tribological properties of copper-based composites with copper coated NbSe2 and CNT. Mater Des. 2015;75:24–31.
   Web of Science ®Google Scholar
• Zhang P, Zhang L, Fu K, et al. Fade behaviour of copper-based brake pad during cyclic emergency braking at high speed and overload condition. Wear. 2019;428-429:10–23.
   Web of Science ®Google Scholar
• Su L, Gao F, Han X, et al. Effect of copper powder third body on tribological property of copper-based friction materials. Tribol Int. 2015;90:420–425.
   Web of Science ®Google Scholar
• Zanon M, Rampin I, Martinez AM, et al. “Development of iron-based alloys for copper-free organic brake pads.” In European congress and exhibition on powder metallurgy. European PM conference proceedings, pp. 1-6. The European Powder Metallurgy Association, 2016.
   Google Scholar
• Su L, Gao F, Han X, et al. Tribological behavior of copper–graphite powder third body on copper-based friction materials. Tribol Lett. 2015;60(2):1–12.
   Web of Science ®Google Scholar
• Wang Y-F, Yang S-Y, Yue Y, et al. Conductive copper-based metal-organic framework nanowire arrays grown on graphene fibers for flexible all-solid-state supercapacitors. J Alloys Compd. 2020;835:155238.
   Web of Science ®Google Scholar
• Patel M, Pardhi B, Chopara S, et al. Lightweight composite materials for automotive-a review. Carbon N Y. 2018;1(2500):151.
   Google Scholar
• Venkatesh S, Murugapoopathiraja K. Scoping review of brake friction material for automotive. Mater Today Proc. 2019;16:927–933.
   Google Scholar
• Li Z, Ma J, Ma H, et al. Properties and applications of basalt fiber and its composites. IOP Conf Ser Earth Environ Sci; 2018, 186(2):012052. IOP Publishing.
   Google Scholar
• Shoaib M, Jamshaid H, Alshareef M, et al. Exploring the potential of alternate inorganic fibers for automotive composites. Polymers (Basel). 2022;14(22):4946.
   PubMed Web of Science ®Google Scholar
• Jamshaid H. Basalt fiber and its applications. J Text Eng Fash Techn. 2017;1(6):254–255.
   Google Scholar
• Parameswaranpillai J, Jacob J, Vijayan S, et al. 5 – Tribological behavior of natural fiber-reinforced polymeric composites, In: George, SC, Haponiuk, JT., Sabu, T, Reghunath R., Sarath P. S., editors. Elsevier series on tribology and surface engineering, tribology of polymers, polymer composites, and polymer nanocomposites, Elsevier; 2023, p. 153–171. ISBN 9780323907484.
   Google Scholar
• Alavudeen A, Thiruchitrambalam M, Athijayamani A. Clutch plate using woven hybrid composite materials. Mater Res Innovations. 2011;15(4):229–234.
   Web of Science ®Google Scholar
• Xin X, Xu CG, Qing LF. Friction properties of sisal fibre reinforced resin brake composites. Wear. 2007;262(5-6):736–741.
   Web of Science ®Google Scholar
• Ilanko AK, Vijayaraghavan S. Wear behavior of asbestos-free eco-friendly composites for automobile brake materials. Friction. 2016;4(2):144–152.
   Web of Science ®Google Scholar
• Reddy PV, Saikumar Reddy RV, Rajendra Prasad P, et al. Evaluation of mechanical and wear performances of natural fiber reinforced epoxy composites. J Nat Fibres. 2022;19(6):2218–2231.
   Web of Science ®Google Scholar
• Chaudhary V, Kumar Bajpai P, Maheshwari S. An investigation on wear and dynamic mechanical behavior of jute/hemp/flax reinforced composites and its hybrids for tribological applications. Fibers and Polymers. 2018;19:403–415.
   Web of Science ®Google Scholar
• Krishnan GS, Ganesh Babu L, Kumaran P, et al. Investigation of Caryota urens fibers on physical, chemical, mechanical and tribological properties for brake pad applications. Mater Res Express. 2020;7(1):0015310.
   Web of Science ®Google Scholar
• Krishnan GS, Jayakumari LS, Babu LG, et al. Investigation on the physical, mechanical and tribological properties of areca sheath fibers for brake pad applications. Mater Res Express. 2019;6(8):0085109.
   Web of Science ®Google Scholar
• Rajeshkumar G. A New study on tribological performance of phoenix Sp. fiber-reinforced epoxy composites. J Nat Fibres. 2021;18(12):2208–2219.
   Web of Science ®Google Scholar
• Rajeshkumar G. Effect of sodium hydroxide treatment on dry sliding wear behavior of Phoenix sp. fiber reinforced polymer composites. J Ind Text. 2022;51(2_suppl):2819S–2834S.
   Web of Science ®Google Scholar
• Akpan EI, Wetzel B, Friedrich K. A fully biobased tribology material based on acrylic resin and short wood fibres. Tribol Int. 2018;120:381–390.
   Web of Science ®Google Scholar
• Satikbaša K, Selvakumar AS, Sal B, et al. Effect of steel family fibers on friction and stiction behavior of brake pads. FME Trans. 2019;47(4):856–864.
   Web of Science ®Google Scholar
• Wang J, Lin M, Xu Z, et al. Microstructure and mechanical properties of C/C–SiC composites fabricated by a rapid processing method. J Eur Ceram Soc. 2009;29(14):3091–3097.
   Web of Science ®Google Scholar
• Panaitescu I, Koch T, Archodoulaki V-M. Accelerated aging of a glass fiber/polyurethane composite for automotive applications. Polym Test. 2019;74:245–256.
   Web of Science ®Google Scholar
• Zhang X, Li K-Z, Li H-J, et al. Tribological and mechanical properties of glass fiber reinforced paper-based composite friction material. Tribol Int. 2014;69:156–167.
   Web of Science ®Google Scholar
• Atiqah A, Jawaid M, Sapuan SM, et al. Thermal properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites. Compos Struct. 2018;202:954–958.
   Web of Science ®Google Scholar
• Ou Y, Zhu D. Tensile behavior of glass fiber reinforced composite at different strain rates and temperatures. Constr Build Mater. 2015;96:648–656.
   Web of Science ®Google Scholar
• Baklouti M, Cristol A-L, Desplanques Y, et al. Impact of the glass fibers addition on tribological behavior and braking performances of organic matrix composites for brake lining. Wear. 2015;330:507–514.
   Web of Science ®Google Scholar
• Manjunath M, Renukappa NM, Suresha B. Influence of micro and nanofillers on mechanical properties of pultruded unidirectional glass fiber reinforced epoxy composite systems. J Compos Mater. 2016;50(8):1109–1121.
   Web of Science ®Google Scholar
• Maruthi BH, Guruprasad HL, Kumar Y. Transient thermal and structural analysis of rotor disc of disk brake. Ind J. Sci Res. 2014;5(2):81.
   Google Scholar
• Panin SV, Kornienko LA, Huang Q, et al. Effect of adhesion on mechanical and tribological properties of glass fiber composites, based on ultra-high molecular weight polyethylene powders with various initial particle sizes. Materials (Basel). 2020;13(7):1602.
   PubMed Web of Science ®Google Scholar
• Tang C, Dang A, Li T, et al. Influence of fiber content on C/C-SiC brake materials fabricated by compression molding and hot sintering. Tribol Int. 2019;136:404–411.
   Web of Science ®Google Scholar
• Zhang P, Zhang L, Wu P, et al. Effect of carbon fiber on the braking performance of copper-based brake pad under continuous high-energy braking conditions. Wear. 2020;458-459:203408.
   Web of Science ®Google Scholar
• Gadow R, Jiménez M. Carbon fiber-reinforced carbon composites for aircraft brakes. Am Ceram Soc Bull. 2019;98:28–34.
   Web of Science ®Google Scholar
• Wu S, Liu Y, Ge Y, et al. Structural transformation of carbon/carbon composites for aircraft brake pairs in the braking process. Tribol Int. 2016;102:497–506.
   Web of Science ®Google Scholar
• Byeong-Choon G, In-Sik C. Microstructural analysis and wear performance of carbon-fiber-reinforced SiC composite for brake pads. Materials (Basel). 2017;10(7):701.
   PubMed Web of Science ®Google Scholar
• Fan S, Sun H, Ma X, et al. Microstructure and properties of a new structure-function integrated C/C-SiC brake material. J Alloys Compd. 2018;769:239–249.
   Web of Science ®Google Scholar
• Fei J, Wang H-K, Huang J-F, et al. Effects of carbon fiber length on the tribological properties of paper-based friction materials. Tribol Int. 2014;72:179–186.
   Web of Science ®Google Scholar
• Hao M, Luo R, Hou Z, et al. Effect of fiber-types on the braking performances of carbon/carbon composites. Wear. 2014;319(1-2):145–149.
   Web of Science ®Google Scholar
• Braier HA. Petroleum. Metals in oil. Anal Chem 1967;39(5):175–176.
   PubMed Web of Science ®Google Scholar
• Daud MAM, Bayanuddin NF, Selamat MZ, et al. Effect of coconut shell powder in brake friction materials. Adv. Mater. Mech. Eng. Res. 2021: 1–2.
   Google Scholar
• Komori T, Miyake S, Senoo Y. Brake-friction material. U.S. Patent 4,954,536, 1990. Issued September 4.
   Google Scholar
• Bashar D-A, Madakson PB, Manji J. Material selection and production of a cold-worked composite brake pad. World J Eng Pure Appl Sci. 2012;2(3):92.
   Google Scholar
• Egeonu D, Oluah C, Okolo P. Production of eco-friendly brake pad using raw materials sourced locally in Nsukka. Int J Energy Technol Policy. 2015;5:47–54.
   Google Scholar
• Juan RS, Kurniawan C, Marbun J, et al. Mechanical properties of brake pad composite made from candlenut shell and coconut shell. J Phys Conf Ser; 2020;1428(1):0012018, IOP Publishing.
   Google Scholar
• Juan J, Simamora R, Kurniawan C, et al. Mechanical properties of brake pad composite made from candlenut shell and coconut shell. J Phys Conf Ser, 2020; 1428(1):0012018. IOP Publishing.
   Google Scholar
• Laher FJ, Kelleher CF. Molded brake lining. U.S. Patent 2,534,607, issued December 19, 1950.
   Google Scholar
• Fisher JS. Friction article and method of producing same. U.S. Patent 2,072,070, issued February 23, 1937.
   Google Scholar
• Nash GW. “Brake dressing compound and process of making same. U.S. Patent 1,639,611, issued August 16, 1927.
   Google Scholar
• Yamashita Y, Nakagawa M, Ibuki M, et al. Friction material for making brake pads. U.S. Patent 5,266,395, issued November 30, 1993.
   Google Scholar
• Kimura K, Goto Y, Torii N, et al. Friction material for dampers and process for producing the same. U.S. Patent 5,830,566, issued November 3, 1998.
   Google Scholar
• Langer, W. Sustainability of aggregates in construction. In: Sustainability of construction materials, Woodhead Publishing; 2016. p. 181–207.
   Google Scholar
• Longley JW, Gardner R. Some compositional effects in the static and dynamic properties of commercial vehicle disk brakes. ImechE. 1988;C453/88:31–38.
   Google Scholar
• Kaufman ER, Gregory RB, Shaines A. Friction lining material. U.S. Patent 4,388,423, issued June 14, 1983.
   Google Scholar
• Kaufman ER, Benson GR, Shaines A. Process for molding a brake lining friction product. U.S. Patent 4,432,922, issued February 21, 1984.
   Google Scholar
• Rhee SK, Kwolek JP. Sponge iron friction material. U.S. Patent 3,835,118, issued September 10, 1974.
   Google Scholar
• Bijwe J. Composites as friction materials: recent developments in non-asbestos fiber reinforced friction materials? a review. Polym Compos. 1997;18(3):378–396.
   Web of Science ®Google Scholar
• Satapathy BK, Bijwe J. Analysis of simultaneous influence of operating variables on abrasive wear of phenolic composites. Wear. 2002;253(7-8):787–794.
   Web of Science ®Google Scholar
• Cai P, Wang Y, Wang T, et al. Improving tribological behaviors of friction material by mullite. Tribol Int. 2016;93:282–288.
   Web of Science ®Google Scholar
• Ji Z, Luo W, Zhou K, et al. Effects of the shapes and dimensions of mullite whisker on the friction and wear behaviors of resin-based friction materials. Wear. 2018;406-407:118–125.
   Web of Science ®Google Scholar
• Bian G, Wu H. Friction and surface fracture of a silicon carbide ceramic brake disc tested against a steel pad. J Eur Ceram Soc. 2015;35(14):3797–3807.
   Web of Science ®Google Scholar
• Sadagopan P, Natarajan HK, Kumar P. Study of silicon carbide-reinforced aluminum matrix composite brake rotor for motorcycle application. Int J. Adv Manufact Techn. 2018;94(1):1461–1475.
   Web of Science ®Google Scholar
• Zhao X, Ouyang J, Yang H, et al. Effect of basalt fibers for reinforcing resin-based brake composites. Minerals. 2020;10(6 ):490.
   Web of Science ®Google Scholar
• Satapathy BK, Bijwe J. Wear data analysis of friction materials to investigate the simultaneous influence of operating parameters and compositions. Wear. 2004;256(7-8):797–804.
   Web of Science ®Google Scholar
• Horth F-J. Stabilizing friction levels. U.S. Patent 5,972,090, issued October 26, 1999.
   Google Scholar
• Filip P, Weiss Z, Rafaja D. On friction layer formation in polymer matrix composite materials for brake applications. Wear. 2002;252(3-4):189–198.
   Web of Science ®Google Scholar
• Bowden FP, Greenwood JH, Imai M. Lubrication at high temperature of refractory solids. Proc R Soc Lond A Math Phys Sci. 1968;304(1477):157–169.
   Google Scholar
• Vijay R, Singaravelu DL, Filip P. Influence of molybdenum disulfide particle size on friction and wear characteristics of non-asbestos-based copper-free brake friction composites. Surf Rev Lett. 2020;27(01):1950085.
   Google Scholar
• Jang H, Lee JS, Fash JW. Compositional effects of the brake friction material on creep groan phenomena. Wear. 2001;251(1-12):1477–1483.
   Google Scholar
• Lee WK, Rhee TH, Kim HS, et al. Effects of antimony trisulfide (Sb2S3) on sliding friction of automotive brake friction materials. Met Mater Int. 2013;19(5):1101–1107.
   Web of Science ®Google Scholar
• Vasconcellos MAZ, Hinrichs R, Da Cunha JBM, et al. Mössbauer spectroscopy characterization of automotive brake disc and polymer matrix composite (PMC) pad surfaces. Wear. 2010;268(5-6):715–720.
   Web of Science ®Google Scholar
• Fedorchenko IM. Antifriction and friction cermet materials. Powder Metall Met Ceram. 2002;41(9):489–497.
   Web of Science ®Google Scholar
• Keller EC. Friction elements. U.S. Patent 3,477,983, issued November 11, 1969.
   Google Scholar
• Antonyraj J, Vijay R. Influence of WS2/SnS2 on the tribological performance of copper-free brake pads. Ind Lubr Tribol. 2019.
   Google Scholar
• Laguna-Camacho JR, Juárez-Morales G, Calderón-Ramón C, et al. A study of the wear mechanisms of disk and shoe brake pads. Eng Fail Anal. 2015;56:348–359.
   Web of Science ®Google Scholar
• Razo DAS, Decrock J, Opsommer A, et al. Promaxon® D in NAO Non steel disc Pad formulations: the importance in the third body layer and its effect on brake noise. SAE Int J Mater Manufact. 2016;9(1):158–170.
   Google Scholar
• Sellami A, Kchaou M, Elleuch R, et al. Study of the interaction between microstructure, mechanical and tribo-performance of a commercial brake lining material. Mater Des. 2014;59:84–93.
   Web of Science ®Google Scholar
• Rodrigues ACP, Österle W, Gradt T, et al. Impact of copper nanoparticles on tribofilm formation determined by pin-on-disc tests with powder supply: addition of artificial third body consisting of Fe3O4, Cu and graphite. Tribol Int. 2017;110:103–112.
   Web of Science ®Google Scholar
• Rajendran R, Ravikumar N, Tamilarasan TR. Sliding wear and friction studies of disc/Pad materials. No. 2018-01-0840. SAE Technical Paper, 2018.
   Google Scholar
• Acquafredda P. XRF technique. Phys Sci Rev. 2019;4(8).
   Web of Science ®Google Scholar
• Ying LIU. Low power total reflection X-ray fluorescence spectrometry: a review, 2015.
   Google Scholar
• Paulette L, Man T, Weindorf DC, et al. Rapid assessment of soil and contaminant variability via portable X-ray fluorescence spectroscopy: Copşa Mică, Romania. Geoderma. 2015;243-244:130–140.
   Web of Science ®Google Scholar
• Trojek T, Trojková D. Uncertainty of quantitative X-ray fluorescence micro-analysis of metallic artifacts caused by their curved shapes. Materials (Basel). 2023;16(3):1133.
   PubMed Web of Science ®Google Scholar
• Hulskotte JHJ, Roskam GD, Van Der Gon HD. Elemental composition of current automotive braking materials and derived air emission factors. Atmos Environ 2014;99:436–445.
   Web of Science ®Google Scholar
• Verma PC, Menapace L, Bonfanti A, et al. Braking pad-disc system: wear mechanisms and formation of wear fragments. Wear. 2015;322-323:251–258.
   Web of Science ®Google Scholar
• Verma PC, Ciudin R, Bonfanti A, et al. Role of the friction layer in the high-temperature pin-on-disc study of a brake material. Wear. 2016;346-347:56–65.
   Web of Science ®Google Scholar
• Alemani M, Gialanella S, Straffelini G, et al. Dry sliding of a low steel friction material against cast iron at different loads: characterization of the friction layer and wear debris. Wear. 2017;376-377:1450–1459.
   Web of Science ®Google Scholar
• Nogueira APG, Leonardi M, Straffelini G, et al. Sliding behavior and particle emissions of Cu-free friction materials with different contents of phenolic resin. Tribol Trans. 2020;63(4):770–779.
   Web of Science ®Google Scholar
• Sathishkumar TP. Tribological behaviors of glass fiber with fillers reinforced hybrid polymer composites. Synth Tribol Appl Hybrid Mater. 2018: 12.
   Google Scholar
• Lyu Y, Leonardi M, Wahlström J, et al. Friction, wear and airborne particle emission from Cu-free brake materials. Tribol Int. 2020;141:105959.
   Web of Science ®Google Scholar
• Malachova K, Kukutschova J, Rybkova Z, et al. Toxicity and mutagenicity of low-metallic automotive brake pad materials. Ecotoxicol Environ Saf 2016;131:37–44.
   PubMed Web of Science ®Google Scholar
• Xu PG, Harjo S, Ojima M, et al. High stereographic resolution texture and residual stress evaluation using time-of-flight neutron diffraction. J Appl Crystallogr. 2018;51(3):746–760.
   PubMedGoogle Scholar
• Ivankina TI, Yu Zel I, Lokajicek T, et al. “Elastic anisotropy of layered rocks: texture-based theoretical predictions (effective media modeling) versus ultrasonic measurements of gneiss.” In 52nd US rock mechanics/geomechanics symposium. American Rock Mechanics Association, 2018.
   Google Scholar
• Deng G, Guo P, Ren W, et al. The magnetic structures and transitions of a potential multiferroic orthoferrite ErFeO3. J Appl Phys. 2015;117(16):164105.
   Web of Science ®Google Scholar
• Menapace C, Leonardi M, Secchi M, et al. Thermal behavior of a phenolic resin for brake pad manufacturing. J Therm Anal Calorim. 2019;137(3):759–766.
   Web of Science ®Google Scholar
• Perricone G, Matějka V, Alemani M, et al. A concept for reducing PM10 emissions for car brakes by 50%. Wear. 2018;396:135–145.
   Web of Science ®Google Scholar
• Menapace C, Mancini A, Federici M, et al. Characterization of airborne wear debris produced by brake pads pressed against HVOF-coated discs. Friction. 2019: 1–12.
   Web of Science ®Google Scholar
• Deepika K, Bhaskar RC, Ramana RD. Fabrication and performance evaluation of a composite material for wear resistance application. Int J Eng Sci Innov Techn (IJESIT). 2013;2(6):1–6.
   Google Scholar
• Rajan BS, Balaji MAS, Sathickbasha K, et al. Influence of binder on thermomechanical and tribological performance in brake Pad. Tribol Ind. 2018;40(4).
   Google Scholar
• Chung JO, Go SR, Kim JH, et al. Effect of MoS2 on transfer film formation and friction coefficients in NAO friction material. Ind Lubric Tribol. 2019.
   Web of Science ®Google Scholar
• Noh HJ, Jang H. Friction instability induced by iron and iron oxides on friction material surface. Wear. 2018;400-401:93–99.
   Web of Science ®Google Scholar
• Yin Y, Bao J, Yang L. Wear performance and its online monitoring of the semimetal brake lining for automobiles. Indus Lubric Tribol. 2014.
   Web of Science ®Google Scholar
• Cai P, Wang Y, Wang T, et al. Effect of resins on thermal, mechanical and tribological properties of friction materials. Tribol Int. 2015;87:1–10.
   Web of Science ®Google Scholar
• Straffelini G, Maines L. The relationship between wear of semimetallic friction materials and pearlitic cast iron in dry sliding. Wear. 2013;307(1-2):75–80.
   Web of Science ®Google Scholar
• Federici M, Gialanella S, Leonardi M, et al. A preliminary investigation on the use of the pin-on-disc test to simulate off-brake friction and wear characteristics of friction materials. Wear. 2018;410-411:202–209.
   Web of Science ®Google Scholar
• Dmitriev AI, Österle W. Modelling the sliding behaviour of tribofilms forming during automotive braking: impact of loading parameters and property range of constituents. Tribol Lett. 2014;53(1):337–351.
   Web of Science ®Google Scholar
• Neis PD, Ferreira NF, Fekete G, et al. Towards a better understanding of the structures existing on the surface of brake pads. Tribol Int. 2017;105:135–147.
   Web of Science ®Google Scholar
• Österle W, Dmitriev AI. Functionality of conventional brake friction materials – perceptions from findings observed at different length scales. Wear. 2011;271(9-10):2198–2207.
   Web of Science ®Google Scholar
• Nogueira APG, Bagolan P, Leonardi M, et al. The role of scorching treatment on the wear and emission behavior of friction materials with and without copper. Wear. 2020;460-461:203480.
   Web of Science ®Google Scholar
• Verma PC, Alemani M, Gialanella S, et al. Wear debris from brake system materials: A multi-analytical characterization approach. Tribol Int. 2016;94:249–259.
   Web of Science ®Google Scholar
• Joo BS, Jara DC, Seo HJ, et al. Influences of the average molecular weight of phenolic resin and potassium titanate morphology on particulate emissions from brake linings. Wear. 2020;450:203243.
   Web of Science ®Google Scholar
• Cai R, Zhang J, Nie X, et al. Wear mechanism evolution on brake discs for reduced wear and particulate emissions. Wear. 2020;452-453:203283.
   Web of Science ®Google Scholar
• Perricone G, Wahlström J, Olofsson U. Towards a test stand for standardized measurements of the brake emissions. Proc Instit Mech Eng Part D J Automob Eng. 2016;230(11):1521–1528.
   Web of Science ®Google Scholar
• Kukutschová J. Wear performance and wear debris of semimetallic automotive brake materials, and Peter Filip. Wear performance and wear debris of semimetallic automotive brake materials. Wear. 2010;268(1-2):86–93.
   Web of Science ®Google Scholar
• Asadi Asadabad M, Eskandari MJ. Transmission electron microscopy as best technique for characterization in nanotechnology. Synth React Inorg, Met-Org, Nano-Met Chem. 2015;45(3):323–326.
   Web of Science ®Google Scholar
• Anjum DH. Characterization of nanomaterials with transmission electron microscopy. IOP Conf Ser Mater Sci Eng; 2016;146(1):012001. IOP Publishing.
   Google Scholar
• Karakizis PN, Pantelis DI, Fourlaris G, et al. Effect of SiC and TiC nanoparticle reinforcement on the microstructure, microhardness, and tensile performance of AA6082-T6 friction stir welds. Int J. Advan Manufact Techn. 2018;95(9):3823–3837.
   Web of Science ®Google Scholar
• Serafini A, Lutterotti L, Gross S, et al. Characterization of nanograined powder samples using the Rietveld method applied to electron diffraction ring patterns. Cambridge University Press; 2017: S63–S68.
   Google Scholar
• Kumar VV, Senthil Kumaran S, Dhanalakshmi S. A case study focusing on investigating the tribological performance of Cu-Sn sintered brake pad of off-high road vehicles. J Compos Mater. 2020;54(27):4299–4310.
   Web of Science ®Google Scholar
• Menapace C, Leonardi M, Perricone G, et al. Pin-on-disc study of brake friction materials with ball-milled nanostructured components. Mater Des. 2017;115:287–298.
   Web of Science ®Google Scholar
• Dawczyk JU. The effect of organic friction modifiers on ZDDP tribofilm, 2018.
   Google Scholar
• Ghazaly NM, El-Sharkawy M, Ahmed I. A review of automotive brake squeal mechanisms. J Mechan Des Vib. 2014;1(1):5–9.
   Google Scholar
• Alemani M, Wahlström J, Olofsson U. On the influence of car brake system parameters on particulate matter emissions. Wear. 2018;396-397:67–74.
   Web of Science ®Google Scholar
• Österle W, Prietzel C, Dmitriev AI. Investigation of surface film nanostructure and assessment of its impact on friction force stabilization during automotive braking. Int J Mater Res. 2010;101(5):669–675.
   Web of Science ®Google Scholar
• Öktem H, Uygur I, Akıncıoğlu G, et al. Experimental study on the performance characteristics of non-asbestos brake pads using a novel friction testing machine. Exp Tech. 2021: 1–10.
   Web of Science ®Google Scholar
• Gutierrez-Ayesta C, Sánchez MD. Characterization by transmission electron microscopy of palladium nanoparticles obtained by thermal reduction. Microsc Microanal. 2020;26(S1):27–28.
   Google Scholar
• Rajeshkumar S, Sivapriya D. Fungus-mediated nanoparticles: characterization and biomedical advances. In Nanoparticles in medicine, Singapore: Springer; 2020. p. 185–199.
   Google Scholar
• Ren X, Zhang X, Xu R, et al. Analyzing energy materials by cryogenic electron microscopy. Adv Mater. 2020;32(24):1908293.
   Web of Science ®Google Scholar
• Campano C, Lopez-Exposito P, Gonzalez-Aguilera L, et al. In-depth characterization of the aggregation state of cellulose nanocrystals through analysis of transmission electron microscopy images. Carbohydr Polym. 2021;254:117271.
   PubMed Web of Science ®Google Scholar
• Che Q, Zhang G, Zhang L, et al. Switching brake materials to extremely wear-resistant self-lubrication materials via tuning interface nanostructures. ACS Appl Mater Interfac. 2018;10(22):19173–19181.
   PubMed Web of Science ®Google Scholar
• Federici M, Alemani M, Menapace C, et al. A critical comparison of dynamometer data with pin-on-disc data for the same two friction material pairs – a case study. Wear. 2019;424-425:40–47.
   Web of Science ®Google Scholar
• Garg BD, Cadle SH, Mulawa PA, et al. Brake wear particulate matter emissions. Environ Sci Technol 2000;34(21):4463–4469.
   Web of Science ®Google Scholar
• Westerlund K–G, Johansson C. Emission of metals and particulate matter due to wear of brake linings in Stockholm. WIT Trans Ecol Environ. 2002;53.
   Google Scholar
• Abu-Allaban M, Gillies JA, Gertler AW, et al. Tailpipe, resuspended road dust, and brake-wear emission factors from on-road vehicles. Atmos Environ 2003;37(37 ):5283–5293.
   Web of Science ®Google Scholar
• Sanders PG, Xu N, Dalka TM, et al. Airborne brake wear debris: size distributions, composition, and a comparison of dynamometer and vehicle tests. Environ Sci Technol 2003;37(18):4060–4069.
   PubMed Web of Science ®Google Scholar
• Querol X, Alastuey A, Ruiz CR, et al. Speciation and origin of PM10 and PM2.5 in selected European cities. Atmos Environ 2004;38(38 ):6547–6555.
   Web of Science ®Google Scholar
• Chan DSEA, Stachowiak GW. Review of automotive brake friction materials. Proc Instit Mechan Eng Part D J Automob Eng. 2004;218(9):953–966.
   Web of Science ®Google Scholar
• Mosleh M, Blau PJ, Dumitrescu D. Characteristics and morphology of wear particles from laboratory testing of disk brake materials. Wear. 2004;256(11-12):1128–1134.
   Web of Science ®Google Scholar
• Hulskotte JHJ, Denier van der Gon HAC, Visschedijk AJH, et al. Brake wear from vehicles as an important source of diffuse copper pollution. Water Sci Technol. 2007;56(1 ):223–231.
   PubMed Web of Science ®Google Scholar
• Barlow TJ, Boulter PG, Mccrae I, et al. Non-exhaust particulate matter emissions from road traffic: summary report. Published project report PPR231, 2007.
   Google Scholar
• Rhee S, Sharma D, Singh SR, et al. An investigation of the role of wear and friction film influencing the friction coefficient of brakes: Mechanism of brake fade. No. 2020-01-1630. SAE Technical Paper, 2020.
   Google Scholar
• Thorpe A, Harrison RM. Sources and properties of non-exhaust particulate matter from road traffic: a review. Sci Total Environ. 2008;400(1-3):270–282.
   PubMed Web of Science ®Google Scholar
• Gietl JK, Lawrence R, Thorpe AJ, et al. Identification of brake wear particles and derivation of a quantitative tracer for brake dust at a major road. Atmos Environ 2010;44(2):141–146.
   Web of Science ®Google Scholar
• Mohammadnejad A, Bahrami A, Goli M, et al. Wear induced failure of automotive disc brakes – a case study. Materials (Basel). 2019;12(24):4214.
   PubMed Web of Science ®Google Scholar
• Kukutschová J, Moravec P, Tomášek V, et al. On airborne nano/micro-sized wear particles released from low-metallic automotive brakes. Environ Pollut. 2011;159(4):998–1006.
   PubMed Web of Science ®Google Scholar
• Pant P, Harrison RM. Estimation of the contribution of road traffic emissions to particulate matter concentrations from field measurements: a review. Atmos Environ 2013;77:78–97.
   Web of Science ®Google Scholar
• Ciudin R, Verma PC, Gialanella S, et al. Wit transactions on ecology and the environment. WIT Trans Ecol Environ. 2014;1:1423–1434.
   Google Scholar
• Hussain S, Abdul Hamid MK, Mat Lazim AR, et al. Brake wear particle size and shape analysis of non-asbestos organic (NAO) and semi metallic brake Pad. Jurnal Teknologi. 2014;71(2).
   Google Scholar
• Wahid SM. Automotive brake wear: a review. Envron Sci Poll Res. 2018;25(1):174–180.
   PubMed Web of Science ®Google Scholar
• Zhao J, Lewinski N, Riediker M. Physico-chemical characterization and oxidative reactivity evaluation of aged brake wear particles. Aerosol Sci Technol. 2015;49(2):65–74.
   Web of Science ®Google Scholar
• Hagino H, Oyama M, Sasaki S. Laboratory testing of airborne brake wear particle emissions using a dynamometer system under urban city driving cycles. Atmos. Environ. 2016;131:269–278.
   Web of Science ®Google Scholar
• Nosko O, Olofsson U. Quantification of ultrafine airborne particulate matter generated by the wear of car brake materials. Wear. 2017;374-375:92–96.
   Web of Science ®Google Scholar
• Niemann H, Winner H, Asbach C, et al. Influence of disc temperature on ultrafine, fine, and coarse particle emissions of passenger Car disc brakes with organic and inorganic Pad binder materials. Atmosphere (Basel). 2020;11(10 ):1060.
   Web of Science ®Google Scholar
• Alves C, Evtyugina M, Vicente A, et al. Organic profiles of brake wear particles. Atmos Res. 2021: 105557.
   Web of Science ®Google Scholar
• Wahlström J. Special issue editorial: study of brake wear particle emissions, 2020: 1359.
   Google Scholar
• Tavangar R, Moghadam HA, Khavandi A, et al. Comparison of dry sliding behavior and wear mechanism of low metallic and copper-free brake pads. Tribol Int. 2020;151:106416.
   Web of Science ®Google Scholar
• Sarkar C, Hirani H. Frictional characteristics of brake pads using inertia brake dynamometer. Int J Curren Eng Techn. 2015;5(2):981–989.
   Google Scholar
• Iijima A, Sato K, Yano K, et al. Particle size and composition distribution analysis of automotive brake abrasion dusts for the evaluation of antimony sources of airborne particulate matter. Atmos Environ 2007;41(23):4908–4919.
   Web of Science ®Google Scholar
• Sriwiboon M, Tiempan N, Kaewlob K, et al. Non-Asbestos organic (NAO) disc Pad wear behavior: divergence of thickness loss and weight loss. No. 2018-01-1866. SAE Technical Paper, 2018.
   Google Scholar
• Zaquen N, Tegels D, Kerssemakers A, et al. Establishing a correlation between friction performance and tribolayer formation using engineered mineral fibers. J Tribol. 2021;143(10):101701.
   Web of Science ®Google Scholar
• Kumar S, Ghosh SK. Particle emission of organic brake pad material: a review. Proc Instit Mech Eng, Part D: J Automob Eng. 2020;234(5):1213–1223.
   Web of Science ®Google Scholar
• Matějka V, Metinöz I, Wahlström J, et al. On the running-in of brake pads and discs for dyno bench tests. Tribol Int. 2017;115:424–431.
   Web of Science ®Google Scholar
• Mathissen M, Grigoratos T, Lahde T, et al. Brake wear particle emissions of a passenger car measured on a chassis dynamometer. Atmosphere (Basel). 2019;10(9 ):556.
   Web of Science ®Google Scholar
• Xiao Y, Zhang Z, Yao P, et al. Mechanical and tribological behaviors of copper metal matrix composites for brake pads used in high-speed trains. Tribol Int. 2018;119:585–592.
   Web of Science ®Google Scholar
• Saikrishnan G, Jayakumari LS, Vijay R. Influence of iron–aluminum alloy on the tribological performance of non-asbestos brake friction materials – a solution for copper replacement. Ind Lubric Tribol. 2019.
   Web of Science ®Google Scholar
• Perricone G, Matĕjka V, Alemani M, et al. A test stand study on the volatile emissions of a passenger car brake assembly. Atmosphere (Basel). 2019;10(5):263.
   Web of Science ®Google Scholar
• Gramstat S, Waninger R, Lugovyy D, et al. Investigation possibilities of brake particle emissions on a brake dynamometer. In 8th international Munich chassis symposium. Wiesbaden: Springer Vieweg; 2017, pp. 629–653.
   Google Scholar
• Mamakos A, Kolbeck K, Arndt M, et al. Particle emissions and disc temperature profiles from a commercial brake system tested on a dynamometer under real-world cycles. Atmosphere (Basel). 2021;12(3):377.
   Web of Science ®Google Scholar
• Makrahy M, Ghazaly N, Moaaz A. Effect of compressibility of brake friction materials on vibration occurrence. Int J Transp Veh Eng. 2017;11:1782–1785.
   Google Scholar
• Chai J, Zhou Z, Ye C, et al. Design and development of a novel sliding friction and wear tester with complex working conditions. Sci Rep. 2021;11(1 ):6903.
   PubMed Web of Science ®Google Scholar
• Hagen Z, Farwick FH, Mathissen M, et al. Study of brake wear particle emissions: impact of braking and cruising conditions. Environ Sci Technol 2019;53(9):5143–5150.
   PubMed Web of Science ®Google Scholar
• Wahlström J. A comparison of measured and simulated friction, wear, and particle emission of disc brakes. Tribol Int. 2015;92:503–511.
   Web of Science ®Google Scholar
• Wahlström J. A factorial design to numerically study the effects of brake pad properties on friction and wear emissions. Adv Tribol. 2016.
   Google Scholar
• Wahlström J, Olofsson U. A field study of airborne particle emissions from automotive disc brakes. Proc the Inst Mechan Eng Part D J Automob Eng. 2015;229(6):747–757.
   Web of Science ®Google Scholar
• Shupert LA, Ebbs SD, Lawrence J, et al. Dissolution of copper and iron from automotive brake pad wear debris enhances growth and accumulation by the invasive macrophyte Salvinia molesta Mitchell. Chemosphere. 2013;92(1):45–51.
   PubMed Web of Science ®Google Scholar
• Sanderson P, Su SS, Chang ITH, et al. Characterisation of iron-rich atmospheric submicrometre particles in the roadside environment. Atmos Environ 2016;140:167–175.
   Web of Science ®Google Scholar
• Krenkel W, Heidenreich B, Renz R. C/C-SiC composites for advanced friction systems. Adv Eng Mater. 2002;4(7):427–436.
   Web of Science ®Google Scholar