Performance assessment of some selected vegetable oils as lubricants in turning of AISI 1045 steel using a Taguchi-based grey relational analysis approach

References

• Alduroobi AA, Ubaid AM, Tawfiq MA, et al. Wire EDM process optimization for machining AISI 1045 steel by use of Taguchi method, artificial neural network and analysis of variances. Int J Syst Assur Eng Manag. 2020;11:1314–1338. https://doi.org/10.1007/s13198-020-00990-z.
   Web of Science ®Google Scholar
• Panwar V, Sharma DK, Kumar KP, et al. Experimental investigations and optimization of surface roughness in turning of en 36 alloy steel using response surface methodology and genetic algorithm. Mater Today Proc. 2021;46:6474–6481. doi:10.1016/j.matpr.2021.03.642
   Google Scholar
• Kumar V. Mathematical modeling of surface roughness and forces for turning of En-353 [doctoral dissertation]; 2018.
   Google Scholar
• Yang, M. Wear of bainite-transformed AISI 1045 steel in comparison with nitriding and boriding treatments [doctoral dissertation]. University of Windsor (Canada); 2020.
   Google Scholar
• Kazeem RA, Fadare DA, Ikumapayi OM, et al. Development of bio-cutting fluid (Cirtullus lanatus) and its performance assessment on the machining of AISI 1525 steel using Taguchi technique and grey relational analysis. Biointerface Res Appl Chem. 2022;12:5324–5346. https://doi.org/10.33263/BRIAC124.53245346.
   Web of Science ®Google Scholar
• Khanna N, Wadhwa J, Pitroda A, et al. Life cycle assessment of environmentally friendly initiatives for sustainable machining: a short review of current knowledge and a case study. Sustain Mater Technol. 2022: e00413. https://doi.org/10.1016/j.susmat.2022.e00413.
   Google Scholar
• Kazeem RA, Fadare DA, Ikumapayi OM, et al. Analysis of the physicochemical properties of some selected non-edible vegetable oil-based cutting fluids using the design of experiment (DOE) approach. Lubricants. 2022;10(2):16. doi:10.3390/lubricants10020016
   Web of Science ®Google Scholar
• Ni J, Cui Z, Wu C, et al. Evaluation of MQL broaching AISI 1045 steel with sesame oil containing nano-particles under best concentration. J Cleaner Prod. 2021;320:128888. doi:10.1016/j.jclepro.2021.128888
   Web of Science ®Google Scholar
• Byers JP. Metalworking fluids (3rd ed.). Boca Raton: CRC Press; 2017. https://doi.org/10.4324/9781351228213.
   Google Scholar
• Kazeem RA, Fadare DA, Ikumapayi OM, et al. Evaluation of mango kernel seed (Mangifera indica) oil as cutting fluid in turning of AISI 1525 steel using the Taguchi-grey relation analysis approach. Lubricants. 2022c;10(4):52. doi:10.3390/lubricants10040052
   Web of Science ®Google Scholar
• Jamil M, Khan AM, Hegab H, et al. Effects of hybrid Al 2 O 3-CNT nanofluids and cryogenic cooling on machining of Ti–6Al–4 V. Int J Adv Manuf Technol. 2019;102:3895–3909. doi:10.1007/s00170-019-03485-9
   Web of Science ®Google Scholar
• Amin AR, Ali A, Ali HM. Application of nanofluids for machining processes: a comprehensive review. Nanomaterials. 2022;12(23):4214. doi:10.3390/nano12234214
   Web of Science ®Google Scholar
• Singh V, Sharma AK, Sahu RK, et al. State of the art on sustainable manufacturing using mono/hybrid nano-cutting fluids with minimum quantity lubrication. Mater Manuf Processes. 2022;37(6):603–639. doi:10.1080/10426914.2022.2032147
   Web of Science ®Google Scholar
• Huang WT, Wu DH, Lin SP, et al. A combined minimum quantity lubrication and MWCNT cutting fluid approach for SKD 11 end milling. Int J Adv Manuf Technol. 2016;84:1697–1704. https://doi.org/10.1007/s00170-015-7770-2.
   Web of Science ®Google Scholar
• Shokoohi Y, Khosrojerdi E, Shiadhi BR. Machining and ecological effects of a new developed cutting fluid in combination with different cooling techniques on turning operation. J Cleaner Prod. 2015;94:330–339. doi:10.1016/j.jclepro.2015.01.055
   Web of Science ®Google Scholar
• Peña-Parás L, Maldonado-Cortés D, Rodríguez-Villalobos M, et al. Enhancing tool life, and reducing power consumption and surface roughness in milling processes by nanolubricants and laser surface texturing. J Cleaner Prod. 2020;253:119836. doi:10.1016/j.jclepro.2019.119836
   Web of Science ®Google Scholar
• Kazeem RA, Fadare DA, Ikumapayi OM, et al. Advances in the application of vegetable-oil-based cutting fluids to sustainable machining operations—a review. Lubricants. 2022;10(4):69. doi:10.3390/lubricants10040069
   Web of Science ®Google Scholar
• Ikumapayi OM, Kazeem RA, Ogedengbe TS, et al. Performance evaluation of African star seed (Chrysophyllum albidum) oil as a cutting lubricant in milling of ASTM A36 steel. Adv Mater Process Technol. 2023: 1–15. doi:10.1080/2374068X.2023.2192391.
   Google Scholar
• Mahadi MA, Choudhury IA, Azuddin M, et al. Vegetable oil-based lubrication in machining: issues and challenges. In: IOP Conference Series: Materials Science and Engineering; 2019 Jun; IOP Publishing. Vol. 530, No. 1. p. 012003.
   Google Scholar
• Ikumapayi OM, Kazeem RA, Popoola LT, et al. Development and assessment of African star seed (Chrysophyllum albidum) oil-based cutting fluid in turning AA6061 using Taguchi grey relational approach. Int J Interact Des Manuf (IJIDeM). 2022: 1–16. https://doi.org/10.1007/s12008-022-01142-2.
   Google Scholar
• Alaba ES, Kazeem RA, Adebayo AS, et al. Evaluation of palm kernel oil as cutting lubricant in turning AISI 1039 steel using Taguchi-grey relational analysis optimization technique. Adv Ind Manuf Eng. 2023;6:100115. doi:10.1016/j.aime.2023.100115
   Google Scholar
• Arul K, Rajaparthiban J, Mohanavel V, et al. Performance and evaluation of vegetable oil-based fluids as future cutting fluids in turning of duplex stainless steel. In: Journal of Physics: Conference Series; 2021 Sep; IOP Publishing; Vol. 2027, No. 1. p. 012005.
   Google Scholar
• Carvalho DOA, da Silva LRR, Sopchenski L, et al. Performance evaluation of vegetable-based cutting fluids in turning of AISI 1050 steel. Int J Adv Manuf Technol. 2019;103:1603–1619. doi:10.1007/s00170-019-03636-y
   Web of Science ®Google Scholar
• Wickramasinghe KC, Perera GIP, Herath HMCM. Formulation and performance evaluation of a novel coconut oil–based metalworking fluid. Mater Manuf Processes. 2017;32(9):1026–1033. doi:10.1080/10426914.2016.1257858
   Web of Science ®Google Scholar
• Wickramasinghe KC, Herath HMCM, Perera GIP. Empirical investigation of surface quality and temperature during turning AISI 304 steel with vegetable oil based metalworking fluids. In: 2016 Manufacturing & Industrial Engineering Symposium (MIES); 2016 Oct; IEEE. p. 1–4.
   Google Scholar
• Rahim EA, Sasahara H. A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys. Tribol Int. 2011;44(3):309–317. doi:10.1016/j.triboint.2010.10.032
   Web of Science ®Google Scholar
• Ghuge NC, Mahalle AM. Performance evaluation of vegetable oil during turning of AISI4130 in terms of temperature and surface roughness. Int J Eng Sci. 2016;5879(5). doi:10.4010/2016.1427.
   Google Scholar
• Raza SW, Pervaiz S, Deiab I. Tool wear patterns when turning of titanium alloy using sustainable lubrication strategies. Int J Prec Eng Manuf. 2014;15:1979–1985. doi:10.1007/s12541-014-0554-z
   Web of Science ®Google Scholar
• Khunt CP, Makhesana MA, Patel KM, et al. Performance assessment of vegetable oil-based minimum quantity lubrication (MQL) in drilling. Mater Today Proc. 2021;44:341–345. doi:10.1016/j.matpr.2020.09.741
   Google Scholar
• Nasution AR, Fuadi Z, Hasanuddin I, et al. Effect of vegetable oils as cutting fluid on wear of carbide cutting tool insert in a milling process. In IOP Conference Series: Materials Science and Engineering; 2020 Mar; IOP Publishing; Vol. 796, No. 1. p. 012001.
   Google Scholar
• Raju RU, Raju VR, Ramesh R. Curvelet transform for estimation of machining performance. Optik (Stuttg). 2017;131:615–625. doi:10.1016/j.ijleo.2016.11.181
   Web of Science ®Google Scholar
• Fernando WLR, Sarmilan N, Wickramasinghe KC, et al. Experimental investigation of MQL (MQL) of coconut oil based metal working fluid. Mater Today Proc. 2020;23:23–26. doi:10.1016/j.matpr.2019.06.079
   Google Scholar
• Gajrani KK, Reddy RPK, Sankar MR. Experimental comparative study of conventional, micro-textured and coated micro-textured tools during machining of hardened AISI 1040 alloy steel. Int J Mach Mach Mater. 2016;18(5–6):522–539. doi:10.1504/IJMMM.2016.078982
   Google Scholar
• Wang Y, Li C, Zhang Y, et al. Comparative evaluation of the lubricating properties of vegetable-oil-based nanofluids between frictional test and grinding experiment. J Manuf Process. 2017;26:94–104. doi:10.1016/j.jmapro.2017.02.001
   Web of Science ®Google Scholar
• Bai X, Jiang J, Li C, et al. Tribological performance of different concentrations of Al2O3 nanofluids on minimum quantity lubrication milling. Chin J Mech Eng. 2023;36(1):1–12. doi:10.1186/s10033-022-00826-w
   Web of Science ®Google Scholar
• Duan Z, Li C, Zhang Y, Sharma S, et al. Mechanical behavior and semiempirical force model of aerospace aluminum alloy milling using nano biological lubricant. Front Mech Eng. 2023;18(1):4. doi:10.1007/s11465-022-0720-4
   Google Scholar
• Cui X, Li C, Zhang Y, Debnath S, et al. Comparative assessment of force, temperature, and wheel wear in sustainable grinding aerospace alloy using biolubricant. Front Mech Eng. 2023;18(1):3. doi:10.1007/s11465-022-0719-x
   Web of Science ®Google Scholar
• Yang Y, Yang M, Li C, et al. Machinability of ultrasonic vibration-assisted micro-grinding in biological bone using nanolubricant. Front Mech Eng. 2023;18(1):1. doi:10.1007/s11465-022-0717-z
   Web of Science ®Google Scholar
• Atabani AE, Silitonga AS, Ong HC, et al. Non-edible vegetable oils: a critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production. Renewable Sustainable Energy Rev. 2013;18:211–245. doi:10.1016/j.rser.2012.10.013
   Web of Science ®Google Scholar
• Vijaya S, Ma AN, Choo YM. A gate to gate assessment of environmental performance for production of crude palm kernel oil using life cycle assessment approach. Am J Environ Sci. 2009;5(3):267–272. doi:10.3844/ajessp.2009.267.272
   Google Scholar
• Kazeem RA, Fadare DA, Adebayo AS, et al. Cutting fluids usage and impacts in metal workshops in Ibadan, Southwestern Nigeria. International Journal of Sustainable Development and Planning. 2023;18(1):1–16. https://doi.org/10.18280/ijsdp.180101.
   Google Scholar
• Kazeem RA, Fadare DA, Abutu J, et al. Performance evaluation of Jatropha oil-based cutting fluid in turning AISI 1525 steel alloy. CIRP J Manuf Sci Technol. 2020;31:418–430. doi:10.1016/j.cirpj.2020.07.004
   Web of Science ®Google Scholar
• Tosun N. Determination of optimum parameters for multi-performance characteristics in drilling by using grey relational analysis. Int J Adv Manuf Technol. 2006;28:450–455. doi:10.1007/s00170-004-2386-y
   Web of Science ®Google Scholar
• Kuo Y, Yang T, Huang GW. The use of grey relational analysis in solving multiple attribute decision-making problems. Comput Ind Eng. 2008;55(1):80–93. doi:10.1016/j.cie.2007.12.002
   Web of Science ®Google Scholar
• Tzeng CJ, Lin YH, Yang YK, et al. Optimization of turning operations with multiple performance characteristics using the Taguchi method and grey relational analysis. J Mater Process Technol. 2009;209(6):2753–2759. doi:10.1016/j.jmatprotec.2008.06.046
   Web of Science ®Google Scholar
• Tosun N, Cogun C, Tosun G. A study on kerf and material removal rate in wire electrical discharge machining based on Taguchi method. J Mater Process Technol. 2004;152(3):316–322. doi:10.1016/j.jmatprotec.2004.04.373
   Web of Science ®Google Scholar
• Moore DA, Kurtzberg TR, Thompson LL, et al. Long and short routes to success in electronically mediated negotiations: group affiliations and good vibrations. Organ Behav Hum Decis Process. 1999;77(1):22–43. doi:10.1006/obhd.1998.2814
   PubMed Web of Science ®Google Scholar
• Gospodarek J, Rusin M, Kandziora-Ciupa M, et al. The subsequent effects of soil pollution by petroleum products and its bioremediation on the antioxidant response and content of elements in vicia faba plants. Energies. 2021;14(22):7748. doi:10.3390/en14227748
   Web of Science ®Google Scholar
• Madanhire I, Mbohwa C. Mitigating environmental impact of petroleum lubricants. Berlin: Springer; 2016. p. 17–34.
   Google Scholar
• Mia M, Rahman MA, Gupta MK, et al. Advanced cooling-lubrication technologies in metal machining. In: Pramanik Alokesh, editor. Machining and tribology. Elsevier; 2022. p. 67–92.
   Google Scholar
• Ojha A, Tiwary D. Organic pollutants in water and its health risk assessment through consumption. In: Ahamad Arif , Siddiqui Sharf Ilahi , Singh Pardeep, editors. Contamination of water. Academic Press; 2021. p. 237–250.
   Google Scholar
• Raimi MO, Sawyerr OH, Ezekwe CI, et al. Toxicants in Water: Hydrochemical Appraisal of Toxic Metals Concentration and Seasonal Variation in Drinking Water Quality in Oil and Gas Field Area of Rivers State, Nigeria. In: PH Saleh, PAI Hassan, editor. Heavy Metals-New Ins; 2022.
   Google Scholar
• Salih N, Salimon J. A review on eco-friendly green biolubricants from renewable and sustainable plant oil sources. Biointerface Res Appl Chem. 2021;11(5):13303–13327. doi:10.33263/BRIAC115.1330313327
   Web of Science ®Google Scholar
• Shah R, Woydt M, Zhang S. The economic and environmental significance of sustainable lubricants. Lubricants. 2021;9(2):21. doi:10.3390/lubricants9020021
   Web of Science ®Google Scholar