Investigations on the temperature-dependent tribological behaviour of spark plasma sintered CNT-304 SS self-lubricating nanocomposites

References

• Nam H, Kang N, Moon B, et al. Gas tungsten arc weldability of stainless steel 304 using CoCrFeMnNi filler metals for cryogenic applications. Sci Technol Weld Joining. 2021;27(1):33–42. doi:10.1080/13621718.2021.1996851
   Web of Science ®Google Scholar
• Tawancy, HM. Failure analysis of 304 stainless steel components used in petrochemical industry applications. Metall, Microstru Analys. 2019;8(5):705–712. doi:10.1007/s13632-019-00578-5
   Web of Science ®Google Scholar
• Mishra RR, Panda A, Sahoo AK, et al. Research progress on nano-metal matrix composite (NMMC) fabrication method: a comprehensive review. Mater Today Proc. 2022;56(4):2104–2109. doi:10.1016/j.matpr.2021.11.437
   Google Scholar
• Yu MF, Files BS, Arepalli S, et al. Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties. Phys Rev Lett. 2000;84(24):5552–5555. doi:10.1103/PhysRevLett.84.5552
   PubMed Web of Science ®Google Scholar
• Radhamani AV, Lau HC, Ramakrishna S. CNT-reinforced metal and steel nanocomposites: a comprehensive assessment of progress and future directions. Comp Part A: Appl Sci Manuf. 2018;114:170–187. doi:10.1016/j.compositesa.2018.08.010
   Web of Science ®Google Scholar
• Mansoor, M, Shahid M. Carbon nanotube-reinforced aluminum composite produced by induction melting. J Appl Res Techn. 2016;14(4):215–224. doi:10.1016/j.jart.2016.05.002
   Google Scholar
• Soni SK, Thomas B, Kar VR. A comprehensive review on CNTs and CNT-reinforced composites: syntheses, characteristics and applications, characteristics and applications. Mater Today Commun. 2020;25:101546. doi:10.1016/j.mtcomm.2020.101546
   Web of Science ®Google Scholar
• Li PY, Li XN, Ma K, et al. Improvement of mechanical properties in carbon nanotube/Al–Cu–Mg composites through introducing bioinspired tree-ring structure. Compos Commun. 2023;37:101462. doi:10.1016/j.coco.2022.101462
   Web of Science ®Google Scholar
• Singh K, Virat Khanna S, Singh S, et al. Paradigm of state-of-the-art CNT reinforced copper metal matrix composites: processing, characterizations, and applications. J Mater Res Techn. 2023;24:8572–8605. doi:10.1016/j.jmrt.2023.05.083
   Google Scholar
• Radhamani AV, Lau HC, Ramakrishna S. Structural, mechanical and corrosion properties of CNT-304 stainless steel nanocomposites. Prog Natur Sci: Mater Int. 2019;29(5):595–602. doi:10.1016/j.pnsc.2019.09.007
   Web of Science ®Google Scholar
• Sundaram R, Yamada T, Hata K, et al. Electrical performance of lightweight CNT-Cu composite wires impacted by surface and internal Cu spatial distribution. Sci Rep. 2017;7(1):9267. doi:10.1038/s41598-017-09279-x
   PubMedGoogle Scholar
• Luo Z, Oki A, Carson L, et al. Thermal stability of functionalized carbon nanotubes studied by in situ transmission electron microscopy. Chem Phys Lett. 2011;513(1-3):88–93. doi:10.1016/j.cplett.2011.07.072
   PubMed Web of Science ®Google Scholar
• Buckley DH. Friction behavior of 304 stainless steel of varying hardness lubricated with benzene and some benzyl structures. NASA technical note D-7787, 1974.
   Google Scholar
• Reinert L, Suárez S, Rosenkranz A. Tribo-Mechanisms of carbon nanotubes: friction and wear behavior of CNT-reinforced nickel matrix composites and CNT-coated bulk nickel. Lubricants. 2016;4(2):11. doi:10.3390/lubricants4020011
   Web of Science ®Google Scholar
• Schäfer C, Reinert L, MacLucas T, et al. Influence of surface design on the solid lubricity of carbon nanotubes-coated steel surfaces. Tribol Lett. 2018;66(3):1–15. doi:10.1007/s11249-018-1044-8
   Web of Science ®Google Scholar
• Chen WX, Tu JP, Wang LY, et al. Tribological application of carbon nanotubes in a metal-based composite coating and composites. Carbon N Y. 2003;41(2):215–222. doi:10.1016/S0008-6223(02)00265-8
   Web of Science ®Google Scholar
• Scharf TW, Neira A, Hwang JY, et al. Self-lubricating carbon nanotube reinforced nickel matrix composites. J Appl Phys. 2009;106(1):013508–013508-7. doi:10.1063/1.3158360
   Web of Science ®Google Scholar
• Reinert L, Suárez S, Rosenkranz A. Tribo-Mechanisms of carbon nanotubes: friction and wear behavior of CNT-reinforced nickel matrix composites and CNT-coated bulk nickel. Lubricants. 2016;4(2). doi:10.3390/lubricants4020011
   Google Scholar
• Yust CS. Tribology and wear. Int Met Rev. 1985;30(1):141–154. https://doi.org/10.1179/imtr.1985.30.1.141.
   Google Scholar
• Zhu S, Kong L, Li F, et al. Nial matrix self-lubricating composite at a wide temperature range. J Tribol. 2015;137(2):021301–021306. http://doi.org/10.1115/1.4028921
   Web of Science ®Google Scholar
• Huang W, Liu H, Wang X. Comparisons of tribological properties of Ti(C,N)/SiC in water and seawater. J Tribol. 2015;137(2):021603–021609. doi:10.1115/1.4028981
   Web of Science ®Google Scholar
• Carboga C, Aktas B, Kurt B. Dry sliding wear behavior of boron-doped 205 manganese steels. J Mater Eng Perform. 2020;29(5):3120–3126. doi:10.1007/s11665-020-04796-9
   Web of Science ®Google Scholar
• Amanullah M, Ramasamy J. Nanotechnology can overcome the critical issues of extremely challenging drilling and production environments. Abu Dhabi international petroleum exhibition and conference; 2014. Society of Petroleum Engineers: Abu Dhabi, UAE. p. 16.
   Google Scholar
• Radhamani AV, Lau HC, Kamaraj M, et al. Structural, mechanical and tribological investigations of CNT-316 stainless steel nanocomposites processed via spark plasma sintering. Tribol Int. 2020;152:106524. doi:10.1016/j.triboint.2020.106524
   Web of Science ®Google Scholar
• Yin H, Yang J, Zhang Y, et al. Carbon nanotube (CNT) reinforced 316L stainless steel composites made by laser powder bed fusion: microstructure and wear response. Wear. 2022: 496–497. doi:10.1016/j.wear.2022.204281
   Web of Science ®Google Scholar
• Suarez S, Lasserre F, Mucklich F. Mechanical properties of MWNT/Ni bulk composites: influence of the microstructural refinement on the hardness. Mater Sci Eng A. 2013;587:381–386. doi:10.1016/j.msea.2013.08.058
   Web of Science ®Google Scholar
• Romanov VS, Lomov SV, Verpoest I, et al. Stress magnification due to carbon nanotube agglomeration in composites. Compos Struct. 2015;133:246–256. doi:10.1016/j.compstruct.2015.07.069
   Web of Science ®Google Scholar
• Rashad M, Pan F, Tang A, et al. Synergetic effect of graphene nanoplatelets (GNPs) and multi-walled carbon nanotube (MW-CNTs) on mechanical properties of pure magnesium. J Alloys Compd. 2014;603:111–118. doi:10.1016/j.jallcom.2014.03.038
   Web of Science ®Google Scholar
• Blau PJ. The significance and use of the friction coefficient. Tribol Int. 2001;34(9):585–591. doi:10.1016/S0301-679X(01)00050-0
   Web of Science ®Google Scholar
• Blau P. On the nature of running-in. Tribol Intern - TRIBOL INT. 2005;38:1007–1012. doi:10.1016/j.triboint.2005.07.020
   Web of Science ®Google Scholar
• Popov VL. Contact mechanics and friction: physical principles and applications. 2nd ed. Berlin, Heidelberg: Springer Berlin Heidelberg; 2017.
   Google Scholar
• Li Y, Li BX, Zou WJ. The relationship between nanocrystalline structure and frictional properties of nanodiamond/Ni composite coatings by brush plating. Appl. Mech. Mater. 2011;80–81:683–687. doi:10.4028/www.scientific.net/AMM.80-81.683
   Google Scholar
• Chou CC, Lee SH. Tribological behavior of nanodiamond-dispersed lubricants on carbon steels and aluminum alloy. Wear. 2010;269:757–762. doi:10.1016/j.wear.2010.08.001
   Web of Science ®Google Scholar
• Bhaumik S, Datta S, Pathak SD. Analyses of tribological properties of castor Oil With various carbonaceous micro- and nano-friction modifiers. J Tribol. 2017;139(6):061802–061814. doi:10.1115/1.4036379
   Web of Science ®Google Scholar
• Kwok JKM, Lim SC. High-speed tribological properties of some Al/SiCp composites: II. Wear mechanisms. Wear mechanisms. Compos Sci Technol. 1999;59(1):65–75. doi:10.1016/S0266-3538(98)00067-0
   Web of Science ®Google Scholar
• Zhang L, Jibin P, Liping W, et al. Synergistic effect of hybrid carbon nanotube−graphene oxide as nanoadditive enhancing the frictional properties of ionic liquids in high vacuum. Carbon N Y. 2014;80:734–745. doi:10.1016/j.carbon.2014.09.022
   Google Scholar
• Reinert L, Green I, Gimmler S, et al. Tribological behavior of self-lubricating carbon nanoparticle reinforced metal matrix composites. Wear. 2018;408-409:72–85. doi:10.1016/j.wear.2018.05.003
   Web of Science ®Google Scholar
• Pearson SR, Shipway PH, Abere JO. The effect of temperature on wear and friction of a high strength steel in fretting. Wear. 2013;303(1):622–631. doi:10.1016/j.wear.2013.03.048
   Web of Science ®Google Scholar
• Jin X, Shipway PH, Sun W. The role of temperature and frequency on fretting wear of a like-on-like stainless steel contact. Tribol Lett. 2017;65(3):65–77. doi:10.1007/s11249-017-0858-0
   Web of Science ®Google Scholar