Analysis of barriers of sustainable 4D printing using Grey TOPSIS approach

References

• Ahmed, A., S. Arya, V. Gupta, H. Furukawa, and A. Khosla. 2021. “4D Printing: Fundamentals, Materials, Applications and Challenges.” Polymer, Elsevier Ltd 228 (May): 123926. https://doi.org/10.1016/j.polymer.2021.123926.
   Google Scholar
• Ameta, K. L., V. S. Solanki, S. Haque, V. Singh, A. P. Devi, and R. S. Chundawat. 2022. “Critical Appraisal and Systematic Review of 3D & 4D Printing in Sustainable and Environment-Friendly Smart Manufacturing Technologies.” Sustainable Materials and Technologies e00481. https://doi.org/10.1016/j.susmat.2022.e00481.
   Web of Science ®Google Scholar
• Azhar, F. E., and E. Pei 2019, “Investigating the Communication of 4D Printing Among Product Designers and Manufacturing Engineers.” https://bura.brunel.ac.uk/bitstream/2438/18701/1/FullText.pdf.
   Google Scholar
• Azhar, F. E., and E. Pei. 2022. “A Conceptual Framework to Improve the Symbol Implementation of 4D Printing Communication Between Designers and Engineers.” Designs 6 (1): 3. https://doi.org/10.3390/designs6010003.
   Google Scholar
• Badi, I., M. B. Bouraima, and M. L. Jibril. 2022. “Risk Assessment in Construction Projects Using the Grey Theory.” Journal of Engineering Management and Systems Engineering 1 (2): 58–66. https://doi.org/10.56578/jemse010203.
   Google Scholar
• Bai, C., and J. Sarkis. 2018. “Integrating Sustainability into Supplier Selection: A Grey-Based Topsis Analysis.” Technological and Economic Development of Economy 24 (6): 2202–2224. https://doi.org/10.3846/tede.2018.5582.
   Web of Science ®Google Scholar
• Carlson, M., and Y. Li. 2020. “Development and Kinetic Evaluation of a Low-Cost Temperature-Sensitive Shape Memory Polymer for 4-Dimensional Printing.” The International Journal of Advanced Manufacturing Technology 106 (9–10): 4263–4279. https://doi.org/10.1007/s00170-020-04927-5.
   Web of Science ®Google Scholar
• Choi, J., O. C. Kwon, W. Jo, H. J. Lee, and M. W. Moon. 2015. “4D Printing Technology: A Review.” 3D Printing and Additive Manufacturing 2 (4): 159–167. https://doi.org/10.1089/3dp.2015.0039.
   Google Scholar
• Demoly, F., M. L. Dunn, K. L. Wood, H. J. Qi, and J. C. André. 2021. “The Status, Barriers, Challenges, and Future in Design for 4D Printing.” Materials & Design 212:110193. https://doi.org/10.1016/j.matdes.2021.110193.
   Web of Science ®Google Scholar
• Deng, J.-L. 1989. “Introduction to Grey System.” Journal of Grey System 1 (1): 1–24.
   Google Scholar
• Dey, S., and S. Chakraborty. 2016. “A Study on the Machinability of Some Metal Alloys Using Grey Topsis Method.” Decision Science Letters 5 (1): 31–41. https://doi.org/10.5267/j.dsl.2015.9.002.
   Google Scholar
• Feng, Y., Z. Zhang, G. Tian, A. M. Fathollahi-Fard, N. Hao, Z. Li, W. Wang, and J. Tan. 2019. “A Novel Hybrid Fuzzy Grey TOPSIS Method: Supplier Evaluation of a Collaborative Manufacturing Enterprise.” Applied Sciences (Switzerland) 9 (18): 3770. https://doi.org/10.3390/app9183770.
   Web of Science ®Google Scholar
• González-Henríquez, C. M., M. A. Sarabia-Vallejos, and J. Rodriguez-Hernandez. 2019. “Polymers for Additive Manufacturing and 4D-Printing: Materials, Methodologies, and Biomedical Applications.” Progress in Polymer Science 94:57–116. https://doi.org/10.1016/j.progpolymsci.2019.03.001.
   Web of Science ®Google Scholar
• Jian, B., F. Demoly, Y. Zhang, H. J. Qi, J. C. André, and S. Gomes. 2022. “Origami-Based Design for 4D Printing of 3D Support-Free Hollow Structures.” Engineering, Chinese Academy of Engineering 12:70–82. https://doi.org/10.1016/j.eng.2021.06.028.
   Google Scholar
• Ju-Long, D. 1982. “Control Problems of Grey Systems.” Systems & Control Letters. Elsevier 1 (5): 288–294. https://doi.org/10.1016/S0167-6911(82)80025-X.
   Web of Science ®Google Scholar
• Kumar, S. B., J. Jeevamalar, P. Ramu, G. Suresh, and K. Senthilnathan. 2021. “Evaluation in 4D Printing - a Review.” Materials Today: Proceedings. Elsevier Ltd 45:1433–1437. https://doi.org/10.1016/j.matpr.2020.07.335.
   Google Scholar
• Laverne, F., R. Marquardt, F. Segonds, I. Koutiri, and N. Perry. 2019. “Improving Resources Consumption of Additive Manufacturing Use During Early Design Stages: A Case Study.” International Journal of Sustainable Engineering, Taylor & Francis 12 (6): 365–375. https://doi.org/10.1080/19397038.2019.1620897.
   Google Scholar
• Liu, Y., and T. W. Chou. 2020. “Additive Manufacturing of Multidirectional Preforms and Composites: From Three-Dimensional to Four-Dimensional.” Materials Today Advances, Elsevier Ltd 5:100045. https://doi.org/10.1016/j.mtadv.2019.100045.
   Google Scholar
• Malaga, A., and S. Vinodh. 2021. “Benchmarking Smart Manufacturing Drivers Using Grey TOPSIS and COPRAS-G Approaches.” Benchmarking. Emerald Publishing Limited 28 (10): 2916–2951. https://doi.org/10.1108/BIJ-12-2020-0620.
   Web of Science ®Google Scholar
• Mallakpour, S., F. Tabesh, and C. M. Hussain. 2021. “3D and 4D Printing: From Innovation to Evolution.” Advances in Colloid and Interface Science 294 (June): 102482. https://doi.org/10.1016/j.cis.2021.102482.
   PubMedGoogle Scholar
• Maraveas, C., I. S. Bayer, and T. Bartzanas. 2022. “4D Printing: Perspectives for the Production of Sustainable Plastics for Agriculture.” Biotechnology Advances. Elsevier Inc 54 (May 2021): 107785. https://doi.org/10.1016/j.biotechadv.2021.107785.
   PubMedGoogle Scholar
• Nugroho, W. T., Y. Dong, A. Pramanik, J. Leng, and S. Ramakrishna. 2021. “Smart Polyurethane Composites for 3D or 4D Printing: General-Purpose Use, Sustainability and Shape Memory Effect.” Composites Part B: Engineering, Elsevier Ltd 223 (March): 109104. https://doi.org/10.1016/j.compositesb.2021.109104.
   Google Scholar
• Prakash, S., S. Kumar, G. Soni, V. Jain, S. Dev, and C. Chandra. 2022. “Evaluating Approaches Using the Grey-TOPSIS for Sustainable Supply Chain Collaboration Under Risk and Uncertainty.” Benchmarking Emerald Publishing Limited. Vol. ahead-of-p. No. ahead-of-print available at: https://doi.org/10.1108/BIJ-05-2022-0319.
   Web of Science ®Google Scholar
• Saritha, D., and D. Boyina. 2021. “A Concise Review on 4D Printing Technology.” Materials Today: Proceedings. Elsevier Ltd 46:692–695. https://doi.org/10.1016/j.matpr.2020.12.016.
   Google Scholar
• Trenfield, S. J., A. Awad, C. M. Madla, G. B. Hatton, J. Firth, A. Goyanes, S. Gaisford, et al. 2019. “Shaping the Future: Recent Advances of 3D Printing in Drug Delivery and Healthcare.” Expert Opinion on Drug Delivery Taylor & Francis 16 (10): 1081–1094. https://doi.org/10.1080/17425247.2019.1660318.
   PubMed Web of Science ®Google Scholar
• Wankhede, V. A., and S. Vinodh. 2021. “Application of Total Interpretive Structural Modeling for Analyzing Factors of Additive Manufacturing and Industry 4.0 Integration.” Rapid Prototyping Journal 27 (8): 1591–1608. https://doi.org/10.1108/RPJ-02-2021-0028.
   Web of Science ®Google Scholar