Development of a framework for sustainability assessment of the machining process through machining parameter optimisation technique

References

• Abas, M., L. Sayd, R. Akhtar, Q. S. Khalid, A. M. Khan, and C. I. Pruncu. 2020. “Optimization of Machining Parameters of Aluminum Alloy 6026-T9 Under MQL-Assisted Turning Process.” Journal of Materials Research and Technology 9 (5): 10916–10940. https://doi.org/10.1016/j.jmrt.2020.07.071.
   Google Scholar
• Abbas, A. T., M. K. Gupta, M. S. Soliman, M. Mia, H. Hegab, M. Luqman, and D. Y. Pimenov. 2019. “Sustainability Assessment Associated with Surface Roughness and Power Consumption Characteristics in Nanofluid MQL-Assisted Turning of AISI 1045 Steel.” The International Journal of Advanced Manufacturing Technology 105 (1–4): 1311–1327. https://doi.org/10.1007/s00170-019-04325-6.
   Web of Science ®Google Scholar
• Abubakr, M., A. T. Abbas, I. Tomaz, M. S. Soliman, M. Luqman, and H. Hegab. 2020. “Sustainable and Smart Manufacturing: An Integrated Approach.” Sustainability 12 (6): 2280. https://doi.org/10.3390/su12062280.
   Web of Science ®Google Scholar
• Abubakr, M., M. A. Hassan, G. M. Krolczyk, N. Khanna, and H. Hegab. 2021. “Sensors Selection for Tool Failure Detection During Machining Processes: A Simple Accurate Classification Model.” CIRP Journal of Manufacturing Science and Technology 32:108–119. https://doi.org/10.1016/j.cirpj.2020.12.002.
   Web of Science ®Google Scholar
• Akcali, S., and A. Cahantimur. 2022. “The Pentagon Model of Urban Social Sustainability: An Assessment of Sociospatial Aspects, Comparing Two Neighborhoods.” Sustainability 14 (9): 4990. https://doi.org/10.3390/su14094990.
   Web of Science ®Google Scholar
• Al-Naggar, Y. M., N. Jamil, M. F. Hassan, and A. R. Yusoff. 2021. “Condition Monitoring Based on IoT for Predictive Maintenance of CNC Machines.” Procedia CIRP 102:314–318. https://doi.org/10.1016/j.procir.2021.09.054.
   Google Scholar
• Alshibi, A., A. Nasreldin, and S. Pervaiz. 2023. “Sustainable Vegetable Oil-Based Minimum Quantity Lubrication Assisted Machining of AZ91 Magnesium Alloy: A Grey Relational Analysis-Based Study.” Lubricants 11 (2): 79. https://doi.org/10.3390/lubricants11020079.
   Web of Science ®Google Scholar
• Asgari, A., H. Delavar, and M. Sedighi. 2023. “Microstructure and Surface Integrity of Machined AZ91 Magnesium Alloy.” Journal of Materials Research and Technology 22:735–746. https://doi.org/10.1016/j.jmrt.2022.11.164.
   Google Scholar
• Ashima, R., A. Haleem, M. Javaid, and S. Rab. 2022. “Understanding the Role and Capabilities of Internet of Things-Enabled Additive Manufacturing Through Its Application Areas.” Advanced Industrial and Engineering Polymer Research 5 (3): 137–142. https://doi.org/10.1016/j.aiepr.2021.12.001.
   Google Scholar
• Aydemir, A. E., T. Taskaya Temizel, and A. Temizel. 2022. “A Machine Learning Ensembling Approach to Predicting Transfer Values.” SN Computer Science 3 (3): 201. https://doi.org/10.1007/s42979-022-01095-z.
   Google Scholar
• Azapagic, A. 2004. “Developing a Framework for Sustainable Development Indicators for the Mining and Minerals Industry.” Journal of Cleaner Production 12 (6): 639–662. https://doi.org/10.1016/S0959-6526(03)00075-1.
   Web of Science ®Google Scholar
• Bag, R., A. Panda, and A. Kumar Sahoo. 2022. “A Concise Review on Environmental Sustainable Machining Conditions of Hard Part Materials.” Materials Today: Proceedings 62:3724–3728. https://doi.org/10.1016/j.matpr.2022.04.433.
   Google Scholar
• Barni, A., C. Capuzzimati, A. Fontana, M. Pirotta, S. Hänninen, M. Räikkönen, and T. Uusitalo. 2022. “Design of a Lifecycle-Oriented Environmental and Economic Indicators Framework for the Mechanical Manufacturing Industry.” Sustainability 14 (5): 2602. https://doi.org/10.3390/su14052602.
   Web of Science ®Google Scholar
• Batterham, R. J. 2006. “Sustainability—The Next Chapter.” Chemical Engineering Science 61 (13): 4188–4193. https://doi.org/10.1016/j.ces.2005.10.016.
   Web of Science ®Google Scholar
• Bhakar, V., A. K. Digalwar, and K. S. Sangwan. 2018. “Sustainability Assessment Framework for Manufacturing Sector – a Conceptual Model.” Procedia CIRP 69:248–253. https://doi.org/10.1016/j.procir.2017.11.101.
   Google Scholar
• Bhanot, N., P. V. Rao, and S. G. Deshmukh. 2016. “An Assessment of Sustainability for Turning Process in an Automobile Firm.” Procedia CIRP 48:538–543. https://doi.org/10.1016/j.procir.2016.03.024.
   Google Scholar
• Bhuiyan, M. S. H., I. A. Choudhury, and M. Dahari. 2014. “Monitoring the Tool Wear, Surface Roughness and Chip Formation Occurrences Using Multiple Sensors in Turning.” Journal of Manufacturing Systems 33 (4): 476–487. https://doi.org/10.1016/j.jmsy.2014.04.005.
   Web of Science ®Google Scholar
• Bhuvanesh Kumar, M., J. Antony, E. Cudney, S. L. Furterer, J. A. Garza-Reyes, and S. M. Senthil. 2023. “Decision-Making Through Fuzzy TOPSIS and COPRAS Approaches for Lean Tools Selection: A Case Study of Automotive Accessories Manufacturing Industry.” International Journal of Management Science and Engineering Management 18 (1): 26–35. https://doi.org/10.1080/17509653.2022.2064356.
   Web of Science ®Google Scholar
• Bonilla Hernández, A. E., T. Lu, T. Beno, C. Fredriksson, and I. S. Jawahir. 2019. “Process Sustainability Evaluation for Manufacturing of a Component with the 6R Application.” Procedia Manufacturing 33:546–553. https://doi.org/10.1016/j.promfg.2019.04.068.
   Google Scholar
• Butola, R., V. Sharma, S. Kanwar, L. Tyagi, M. Singari, and M. Tyagi. 2020. “Optimizing the Machining Variables in CNC Turning of Aluminum Based Hybrid Metal Matrix Composites.” SN Applied Sciences 2 (8): 1356. https://doi.org/10.1007/s42452-020-3155-8.
   Web of Science ®Google Scholar
• Cai, W., K. Lai, C. Liu, F. Wei, M. Ma, S. Jia, Z. Jiang, and L. Lv. 2019. “Promoting Sustainability of Manufacturing Industry Through the Lean Energy-Saving and Emission-Reduction Strategy.” Science of the Total Environment 665:23–32. https://doi.org/10.1016/j.scitotenv.2019.02.069.
   PubMed Web of Science ®Google Scholar
• Cai, W., L. Wang, L. Li, J. Xie, S. Jia, X. Zhang, Z. Jiang, and K. Lai. 2022. “A Review on Methods of Energy Performance Improvement Towards Sustainable Manufacturing from Perspectives of Energy Monitoring, Evaluation, Optimization and Benchmarking.” Renewable and Sustainable Energy Reviews 159:112227. https://doi.org/10.1016/j.rser.2022.112227.
   Web of Science ®Google Scholar
• Camposeco-Negrete, C. 2021. “Analysis and Optimization of Sustainable Machining of AISI O1 Tool Steel by the Wire-EDM Process.” Advances in Manufacturing 9 (2): 304–317. https://doi.org/10.1007/s40436-021-00353-2.
   Web of Science ®Google Scholar
• Cardoso, L. G., D. S. Madeira, T. E. P. A. Ricomini, R. A. Miranda, T. G. Brito, and E. J. Paiva. 2021. “Optimization of Machining Parameters Using Response Surface Methodology with Desirability Function in Turning Duplex Stainless Steel UNS S32760.” The International Journal of Advanced Manufacturing Technology 117 (5–6): 1633–1644. https://doi.org/10.1007/s00170-021-07690-3.
   Web of Science ®Google Scholar
• Chate, G. R., M. P. G C, H. M. Harsha, S. U. Urankar, S. A. Sanadi, A. P. Jadhav, S. Hiremath, and A. S. Deshpande. 2021. “Sustainable Machining: Modelling and Optimization Using Taguchi, MOORA and DEAR Methods.” Materials Today: Proceedings 46:8941–8947. https://doi.org/10.1016/j.matpr.2021.05.365.
   Google Scholar
• Cheng, Y., X. Gai, R. Guan, Y. Jin, M. Lu, and Y. Ding. 2023. “Tool Wear Intelligent Monitoring Techniques in Cutting: A Review.” Journal of Mechanical Science and Technology 37 (1): 289–303. https://doi.org/10.1007/s12206-022-1229-9.
   Web of Science ®Google Scholar
• Chou, C.-J., C.-W. Chen, and C. Conley. 2015. “An Approach to Assessing Sustainable Product-Service Systems.” Journal of Cleaner Production 86:277–284. https://doi.org/10.1016/j.jclepro.2014.08.059.
   Web of Science ®Google Scholar
• Daniel, S. A. A., S. V. Ananth, A. Parthiban, and S. Sivaganesan. 2020. “Optimization of Machining Parameters in Electro Chemical Machining of Al5059/SiC/MoS2 Composites Using Taguchi Method.” Materials Today: Proceedings 21:738–743. https://doi.org/10.1016/j.matpr.2019.06.750.
   Google Scholar
• Daniyan, I. A., I. Tlhabadira, O. O. Daramola, and K. Mpofu. 2019. “Design and Optimization of Machining Parameters for Effective AISI P20 Removal Rate During Milling Operation.” Procedia CIRP 84:861–867. https://doi.org/10.1016/j.procir.2019.04.301.
   Google Scholar
• Delijaicov, S., G. C. Alves, É. C. Bordinassi, and E. J. D. Silva. 2023. “Optimization of Machining Parameters Applied in Hard Turning of Large Components for Cooling Lubrication Methods.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237 (2): 580–588. https://doi.org/10.1177/09544089221116414.
   Web of Science ®Google Scholar
• Department of Electrical Engineering, Jamia Millia Islamia, New Delhi, India, 110001, Singh, J., din, Z., & Department of Electrical Engineering, Jamia Millia Islamia, New Delhi, India, 110001. 2022. “Energy Efficient Data Aggregation and Density-Based Spatial Clustering of Applications with Noise for Activity Monitoring in Wireless Sensor Networks.” Engineered Science https://doi.org/10.30919/es8d694.
   Google Scholar
• Diao, Y., L. Yan, and K. Gao. 2022. “A Strategy Assisted Machine Learning to Process Multi-Objective Optimization for Improving Mechanical Properties of Carbon Steels.” Journal of Materials Science & Technology 109:86–93. https://doi.org/10.1016/j.jmst.2021.09.004.
   Web of Science ®Google Scholar
• Dixit, N., V. Sharma, and P. Kumar. 2022. “Experimental Investigations into Ultrasonic Assisted Magnetic Abrasive Flow Machining Process.” Materials and Manufacturing Processes 38 (10): 1291–1306. https://doi.org/10.1080/10426914.2022.2146712.
   Web of Science ®Google Scholar
• Dubravská, M., M. Marchevská, P. Vašaničová, and R. Kotulič. 2020. “Corporate Social Responsibility and Environmental Management Linkage: An Empirical Analysis of the Slovak Republic.” Sustainability 12 (13): 5431. https://doi.org/10.3390/su12135431.
   Web of Science ®Google Scholar
• EEA indicators—European Environment Agency. (n.d.). [Page]. Accessed January 8, 2023, from https://www.eea.europa.eu/data-and-maps/indicators/about/eea-indicators.
   Google Scholar
• Eheliyagoda, D., J. Li, Y. Geng, and X. Zeng. 2022. “The Role of China’s Aluminum Recycling on Sustainable Resource and Emission Pathways.” Resources Policy 76:102552. https://doi.org/10.1016/j.resourpol.2022.102552.
   Web of Science ®Google Scholar
• El-Kenawy, E.-S. M., S. Mirjalili, N. Khodadadi, A. A. Abdelhamid, M. M. Eid, M. El-Said, and A. Ibrahim. 2023. “Feature Selection in Wind Speed Forecasting Systems Based on Meta-Heuristic Optimization.” PLOS ONE 18 (2): e0278491. https://doi.org/10.1371/journal.pone.0278491.
   PubMed Web of Science ®Google Scholar
• Errigo, A., J.-K. Choi, and K. Kissock. 2022. “Techno-Economic-Environmental Impacts of Industrial Energy Assessment: Sustainable Industrial Motor Systems of Small and Medium-Sized Enterprises.” Sustainable Energy Technologies and Assessments 49:101694. https://doi.org/10.1016/j.seta.2021.101694.
   Web of Science ®Google Scholar
• Estoque, R. C., M. Ooba, X. T. Seposo, T. Togawa, Y. Hijioka, K. Takahashi, and S. Nakamura. 2020. “Heat Health Risk Assessment in Philippine Cities Using Remotely Sensed Data and Social-Ecological Indicators.” Nature Communications 11 (1): 1581. https://doi.org/10.1038/s41467-020-15218-8.
   PubMed Web of Science ®Google Scholar
• Feng, C., H. Guo, J. Zhang, Y. Huang, and S. Huang. 2022. “A Systematic Method of Optimization of Machining Parameters Considering Energy Consumption, Machining Time, and Surface Roughness with Experimental Analysis.” The International Journal of Advanced Manufacturing Technology 119 (11–12): 7383–7401. https://doi.org/10.1007/s00170-022-08772-6.
   Web of Science ®Google Scholar
• Gasparatos, A., and A. Scolobig. 2012. “Choosing the Most Appropriate Sustainability Assessment Tool.” Ecological Economics 80:1–7. https://doi.org/10.1016/j.ecolecon.2012.05.005.
   Web of Science ®Google Scholar
• General Motors Metrics for Sustainable Manufacturing—LABORATORY FOR SUSTAINABLE BUSINESS. (n.d.). Accessed January 8, 2023, from https://www.readkong.com/page/general-motors-1822704.
   Google Scholar
• Gerten, D., V. Heck, J. Jägermeyr, and B. Bodirsky, I. Fetzer, M. Jalava, M. Kummu, W. Lucht, J. Rockström, S. Schaphoff, & H. Schellnhuber, (Ed.), 2019. Model Output For: “Feeding ten Billion People is Possible within Four Terrestrial Planetary boundaries” (P. 2 Files) [Application/octet-Stream, application/octet-Stream]. GFZ Data Services. https://doi.org/10.5880/PIK.2019.021
   Google Scholar
• Givehchi, M., A. Haghighi, and L. Wang. 2017. “Cloud-DPP for Distributed Process Planning of Mill-Turn Machining Operations.” Robotics and Computer-Integrated Manufacturing 47:76–84. https://doi.org/10.1016/j.rcim.2016.11.007.
   Web of Science ®Google Scholar
• GRI - Standards. (n.d.). Accessed January 8, 2023, from https://www.globalreporting.org/standards/.
   Google Scholar
• Gunasekaran, A., and A. Spalanzani. 2012. “Sustainability of Manufacturing and Services: Investigations for Research and Applications.” International Journal of Production Economics 140 (1): 35–47. https://doi.org/10.1016/j.ijpe.2011.05.011.
   Web of Science ®Google Scholar
• Gupta, M. K., Q. Song, Z. Liu, M. Sarikaya, M. Jamil, M. Mia, A. K. Singla, A. M. Khan, N. Khanna, and D. Y. Pimenov. 2021. “Environment and Economic Burden of Sustainable Cooling/Lubrication Methods in Machining of Inconel-800.” Journal of Cleaner Production 287:125074. https://doi.org/10.1016/j.jclepro.2020.125074.
   Web of Science ®Google Scholar
• Hallstedt, S. I. 2017. “Sustainability Criteria and Sustainability Compliance Index for Decision Support in Product Development.” Journal of Cleaner Production 140:251–266. https://doi.org/10.1016/j.jclepro.2015.06.068.
   Web of Science ®Google Scholar
• Hapuwatte, B., K. D. Seevers, F. Badurdeen, and I. S. Jawahir. 2016. “Total Life Cycle Sustainability Analysis of Additively Manufactured Products.” Procedia CIRP 48:376–381. https://doi.org/10.1016/j.procir.2016.03.016.
   Google Scholar
• Haq, M. A. U., S. Hussain, M. A. Ali, M. U. Farooq, N. A. Mufti, C. I. Pruncu, and A. Wasim. 2021. “Evaluating the Effects of Nano-Fluids Based MQL Milling of IN718 Associated to Sustainable Productions.” Journal of Cleaner Production 310:127463. https://doi.org/10.1016/j.jclepro.2021.127463.
   Web of Science ®Google Scholar
• He, B., and K.-J. Bai. 2021. “Digital Twin-Based Sustainable Intelligent Manufacturing: A Review.” Advances in Manufacturing 9 (1): 1–21. https://doi.org/10.1007/s40436-020-00302-5.
   Web of Science ®Google Scholar
• Hegab, H. A., B. Darras, and H. A. Kishawy. 2018. “Towards Sustainability Assessment of Machining Processes.” Journal of Cleaner Production 170:694–703. https://doi.org/10.1016/j.jclepro.2017.09.197.
   Web of Science ®Google Scholar
• Herrmann, C., M. Hauschild, T. Gutowski, and R. Lifset. 2014. “Life Cycle Engineering and Sustainable Manufacturing: Life Cycle Engineering and Sustainable Manufacturing.” Journal of Industrial Ecology 18 (4): 471–477. https://doi.org/10.1111/jiec.12177.
   Web of Science ®Google Scholar
• Horvath, R., G. Matyasi, and A. Dregelyi-Kiss. 2014. “Optimization of Machining Parameters for Fine Turning Operations Based on the Response Surface Method.” ANZIAM Journal 54:250. https://doi.org/10.21914/anziamj.v55i0.7865.
   Google Scholar
• Hu, L., R. Tang, W. Cai, Y. Feng, and X. Ma. 2019. “Optimisation of Cutting Parameters for Improving Energy Efficiency in Machining Process.” Robotics and Computer-Integrated Manufacturing 59:406–416. https://doi.org/10.1016/j.rcim.2019.04.015.
   Web of Science ®Google Scholar
• Hu, L., R. Tang, K. He, and S. Jia. 2015. “Estimating Machining-Related Energy Consumption of Parts at the Design Phase Based on Feature Technology.” International Journal of Production Research 53 (23): 7016–7033. https://doi.org/10.1080/00207543.2014.944281.
   Web of Science ®Google Scholar
• Huang, D. 2022. SVR Modeling and Parameter Optimization for Financial Time Series Forecasting. 2022 IEEE Conference on Telecommunications, Optics and Computer Science (TOCS), 1126–1130. https://doi.org/10.1109/TOCS56154.2022.10016054
   Google Scholar
• Imad, M., C. Hopkins, A. Hosseini, N. Z. Yussefian, and H. A. Kishawy. 2022. “Intelligent Machining: A Review of Trends, Achievements and Current Progress.” International Journal of Computer Integrated Manufacturing 35 (4–5): 359–387. https://doi.org/10.1080/0951192X.2021.1891573.
   Web of Science ®Google Scholar
• Ingarao, G., G. Ambrogio, F. Gagliardi, and R. Di Lorenzo. 2012. “A Sustainability Point of View on Sheet Metal Forming Operations: Material Wasting and Energy Consumption in Incremental Forming and Stamping Processes.” Journal of Cleaner Production 29-30:255–268. https://doi.org/10.1016/j.jclepro.2012.01.012.
   Web of Science ®Google Scholar
• Ishfaq, K., M. Rehman, and Y. Wang. 2023. “Toward the Targeted Material Removal with Optimized Surface Finish During EDM for the Repair Applications in Dies and Molds.” Arabian Journal for Science and Engineering 48 (3): 2653–2669. https://doi.org/10.1007/s13369-022-07006-x.
   Google Scholar
• Jamil, M., W. Zhao, N. He, M. K. Gupta, M. Sarikaya, A. M. Khan, S. Siengchin, and D. Y. Pimenov. 2021. “Sustainable Milling of Ti–6Al–4V: A Trade-Off Between Energy Efficiency, Carbon Emissions and Machining Characteristics Under MQL and Cryogenic Environment.” Journal of Cleaner Production 281:125374. https://doi.org/10.1016/j.jclepro.2020.125374.
   Web of Science ®Google Scholar
• Jamwal, A., R. Agrawal, M. Sharma, and A. Giallanza. 2021. “Industry 4.0 Technologies for Manufacturing Sustainability: A Systematic Review and Future Research Directions.” Applied Sciences 11 (12): 5725. https://doi.org/10.3390/app11125725.
   Google Scholar
• Jayal, A. D., F. Badurdeen, O. W. Dillon, and I. S. Jawahir. 2010. “Sustainable Manufacturing: Modeling and Optimization Challenges at the Product, Process and System Levels.” CIRP Journal of Manufacturing Science and Technology 2 (3): 144–152. https://doi.org/10.1016/j.cirpj.2010.03.006.
   Google Scholar
• Jie, H., I. Khan, M. Alharthi, M. W. Zafar, and A. Saeed. 2023. “Sustainable Energy Policy, Socio-Economic Development, and Ecological Footprint: The Economic Significance of Natural Resources, Population Growth, and Industrial Development.” Utilities Policy 81:101490. https://doi.org/10.1016/j.jup.2023.101490.
   Web of Science ®Google Scholar
• Kalateh, M. R., A. Kianifar, and M. Sardarabadi. 2022. “A Three-Dimensional Numerical Study of the Effects of Various Twisted Tapes on Heat Transfer Characteristics and Flow Field in a Tube: Experimental Validation and Multi-Objective Optimization via Response Surface Methodology.” Sustainable Energy Technologies and Assessments 50:101798. https://doi.org/10.1016/j.seta.2021.101798.
   Web of Science ®Google Scholar
• Kam, M., A. İ̇pekçi, and K. Argun. 2022. “Experimental Investigation and Optimization of Machining Parameters of Deep Cryogenically Treated and Tempered Steels in Electrical Discharge Machining Process.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236 (5): 1927–1935. https://doi.org/10.1177/09544089221078133.
   Web of Science ®Google Scholar
• Kandavalli, S. R., A. M. Khan, A. Iqbal, M. Jamil, S. Abbas, R. A. Laghari, and Q. Cheok. 2023. “Application of Sophisticated Sensors to Advance the Monitoring of Machining Processes: Analysis and Holistic Review.” The International Journal of Advanced Manufacturing Technology 125 (3–4): 989–1014. https://doi.org/10.1007/s00170-022-10771-6.
   Web of Science ®Google Scholar
• Kang, T. 2020. “BIM-Based Human Machine Interface (HMI) Framework for Energy Management.” Sustainability 12 (21): 8861. https://doi.org/10.3390/su12218861.
   Web of Science ®Google Scholar
• Kechagias, J. D., K.-E. Aslani, N. A. Fountas, N. M. Vaxevanidis, and D. E. Manolakos. 2020. “A Comparative Investigation of Taguchi and Full Factorial Design for Machinability Prediction in Turning of a Titanium Alloy.” Measurement 151:107213. https://doi.org/10.1016/j.measurement.2019.107213.
   Web of Science ®Google Scholar
• Khan, A. M., M. K. Gupta, H. Hegab, M. Jamil, M. Mia, N. He, Q. Song, Z. Liu, and C. I. Pruncu. 2020. “Energy-Based Cost Integrated Modelling and Sustainability Assessment of Al-GnP Hybrid Nanofluid Assisted Turning of AISI52100 Steel.” Journal of Cleaner Production 257:120502. https://doi.org/10.1016/j.jclepro.2020.120502.
   Web of Science ®Google Scholar
• Kim, D. B., S.-J. Shin, G. Shao, and A. Brodsky. 2015. “A Decision-Guidance Framework for Sustainability Performance Analysis of Manufacturing Processes.” The International Journal of Advanced Manufacturing Technology 78 (9–12): 1455–1471. https://doi.org/10.1007/s00170-014-6711-9.
   Web of Science ®Google Scholar
• Kim, S., G.-H. Kim, and Y.-D. Lee. 2013. “Sustainability Life Cycle Cost Analysis of Roof Waterproofing Methods Considering LCCO2.” Sustainability 6 (1): 158–174. https://doi.org/10.3390/su6010158.
   Web of Science ®Google Scholar
• Kittali, P., V. Kalwa, D. Athith, K. P. Prashanth, and B. K. Venkatesh. 2022. “Optimization of Machining Parameters in Turning Operation to Minimize the Surface Roughness Using Taguchi Technique for EN1A Alloy Steel.” Materials Today: Proceedings 54:463–467. https://doi.org/10.1016/j.matpr.2021.10.323.
   Google Scholar
• Kosarac, A., C. Mladjenovic, M. Zeljkovic, S. Tabakovic, and M. Knezev. 2022. “Neural-Network-Based Approaches for Optimization of Machining Parameters Using Small Dataset.” Materials 15 (3): 700. https://doi.org/10.3390/ma15030700.
   PubMed Web of Science ®Google Scholar
• Kouahla, I., M. A. Yallese, S. Belhadi, K. Safi, and M. Nouioua. 2022. “Tool Vibration, Surface Roughness, Cutting Power, and Productivity Assessment Using RSM and GRA Approach During Machining of Inconel 718 with PVD-Coated Carbide Tool.” The International Journal of Advanced Manufacturing Technology 122 (3–4): 1835–1856. https://doi.org/10.1007/s00170-022-09988-2.
   Web of Science ®Google Scholar
• Kravchenko, M., D. C. Pigosso, and T. C. McAloone. 2019. “Towards the Ex-Ante Sustainability Screening of Circular Economy Initiatives in Manufacturing Companies: Consolidation of Leading Sustainability-Related Performance Indicators.” Journal of Cleaner Production 241:118318. https://doi.org/10.1016/j.jclepro.2019.118318.
   Web of Science ®Google Scholar
• Kumar Debta, M., R. Mishra, and M. Masanta. 2020. “Experimental Investigation on the Machining Performance of AZ91D (90% Mg) Alloy by Wire-Cut EDM.” Materials Today: Proceedings 33:5557–5560. https://doi.org/10.1016/j.matpr.2020.03.540.
   Google Scholar
• Kumar, P., A. Chaudhary, A. Kuradiya, R. Mordia, and M. Bhandari. 2022. “Implementation of Sustainable Manufacturing in Production Systems: A Systematic Review of Past Decades Data.” Applied Ecology and Environmental Sciences 10 (7): 488–497. https://doi.org/10.12691/aees-10-7-7.
   Google Scholar
• Kumar Parida, A., and K. Maity. 2019. “Modeling of Machining Parameters Affecting Flank Wear and Surface Roughness in Hot Turning of Monel-400 Using Response Surface Methodology (RSM).” Measurement 137:375–381. https://doi.org/10.1016/j.measurement.2019.01.070.
   Web of Science ®Google Scholar
• Kuntoğlu, M., E. Salur, M. K. Gupta, M. Sarıkaya, and D. Y. Pimenov. 2021. “A State-Of-The-Art Review on Sensors and Signal Processing Systems in Mechanical Machining Processes.” The International Journal of Advanced Manufacturing Technology 116 (9–10): 2711–2735. https://doi.org/10.1007/s00170-021-07425-4.
   Web of Science ®Google Scholar
• Labuschagne, C., A. C. Brent, and R. P. G. van Erck. 2005. “Assessing the Sustainability Performances of Industries.” Journal of Cleaner Production 13 (4): 373–385. https://doi.org/10.1016/j.jclepro.2003.10.007.
   Web of Science ®Google Scholar
• Lakshmana Kumar, S., M. Subburaj, A. Kulandaivel, P. Manoj Kumar, A. Thanikasalam, and R. Kumar. 2022. “Multiple response optimisation of machining parameters in turning nimonic C263 using TOPSIS approach.” Materials Today: Proceedings 59:1414–1419. https://doi.org/10.1016/j.matpr.2021.12.106.
   Google Scholar
• Lee, W. J., H. Wu, H. Yun, H. Kim, M. B. G. Jun, and J. W. Sutherland. 2019. “Predictive Maintenance of Machine Tool Systems Using Artificial Intelligence Techniques Applied to Machine Condition Data.” Procedia CIRP 80:506–511. https://doi.org/10.1016/j.procir.2018.12.019.
   Google Scholar
• Lee, Y., A. Resiga, S. Yi, and C. Wern. 2020. “The Optimization of Machining Parameters for Milling Operations by Using the Nelder–Mead Simplex Method.” Journal of Manufacturing and Materials Processing 4 (3): 66. https://doi.org/10.3390/jmmp4030066.
   Google Scholar
• Li, R., C. He, W. Xu, and X. Wang. 2023. “Modeling and Optimizing the Specific Cutting Energy of Medium Density Fiberboard During the Helical Up-Milling Process.” Wood Material Science & Engineering 18 (2): 464–471. https://doi.org/10.1080/17480272.2022.2049867.
   Web of Science ®Google Scholar
• Li, Z., Y. Wang, K. Wang, and J. Li. 2019. “HDPS-BPSO Based Predictive Maintenance Scheduling for Backlash Error Compensation in a Machining Center.” In Advanced Manufacturing and Automation VIII, edited by K. Wang, Y. Wang, J. O. Strandhagen, and T. Yu, Vol. 484, 71–77. Springer Singapore. https://doi.org/10.1007/978-981-13-2375-1_11.
   Google Scholar
• Linke, B. S., G. J. Corman, D. A. Dornfeld, and S. Tönissen. 2013. “Sustainability Indicators for Discrete Manufacturing Processes Applied to Grinding Technology.” Journal of Manufacturing Systems 32 (4): 556–563. https://doi.org/10.1016/j.jmsy.2013.05.005.
   Web of Science ®Google Scholar
• Lu, T., G. Rotella, S. C. Feng, F. Badurdeen, O. W. Dillon, K. Rouch, and I. S. Jawahir. 2012. “Metrics-Based Sustainability Assessment of a Drilling Process.” In Sustainable Manufacturing, edited by G. Seliger, 59–64. Berlin Heidelberg: Springer. https://doi.org/10.1007/978-3-642-27290-5_8.
   Google Scholar
• Mahesh, K., J. T. Philip, S. N. Joshi, and B. Kuriachen. 2021. “Machinability of Inconel 718: A Critical Review on the Impact of Cutting Temperatures.” Materials and Manufacturing Processes 36 (7): 753–791. https://doi.org/10.1080/10426914.2020.1843671.
   Web of Science ®Google Scholar
• Mahfoud, S., A. Derouich, A. Iqbal, and N. El Ouanjli. 2022. “ANT-colony optimisation-direct torque control for a doubly fed induction motor: An experimental validation.” Energy Reports 8:81–98. https://doi.org/10.1016/j.egyr.2021.11.239.
   Web of Science ®Google Scholar
• Maneiah, D., M. Shunmugasundaram, A. Raji Reddy, and Z. Begum. 2020. “Optimization of Machining Parameters for Surface Roughness During Abrasive Water Jet Machining of Aluminium/Magnesium Hybrid Metal Matrix Composites.” Materials Today: Proceedings 27:1293–1298. https://doi.org/10.1016/j.matpr.2020.02.264.
   Google Scholar
• Mani, M., J. Madan, J. H. Lee, K. W. Lyons, and S. K. Gupta. 2014. “Sustainability Characterisation for Manufacturing Processes.” International Journal of Production Research 52 (20): 5895–5912. https://doi.org/10.1080/00207543.2014.886788.
   Web of Science ®Google Scholar
• Marakini, V., S. P. Pai, U. K. Bhat, D. T. Singh, and B. P. Achar. 2022. “High Speed Machining for Enhancing the AZ91 Magnesium Alloy Surface Characteristics Influence and Optimisation of Machining Parameters.” Defence Science Journal 72 (1): 105–113. https://doi.org/10.14429/dsj.72.17049.
   Web of Science ®Google Scholar
• Mawson, V. J., and B. R. Hughes. 2020. “Thermal Modelling of Manufacturing Processes and HVAC Systems.” Energy 204:117984. https://doi.org/10.1016/j.energy.2020.117984.
   Web of Science ®Google Scholar
• McAfee, M., M. Kariminejad, A. Weinert, S. Huq, J. D. Stigter, and D. Tormey. 2022. “State Estimators in Soft Sensing and Sensor Fusion for Sustainable Manufacturing.” Sustainability 14 (6): 3635. https://doi.org/10.3390/su14063635.
   Web of Science ®Google Scholar
• Memić, B., A. Hasković Džubur, and E. Avdagić-Golub. 2022. “Green IoT: Sustainability environment and technologies.” Science, Engineering and Technology 2 (1): 24–29. https://doi.org/10.54327/set2022/v2.i1.25.
   Google Scholar
• Mercy, J. L., P. Sivashankari, M. Sangeetha, K. R. Kavitha, and S. Prakash. 2022. “Genetic Optimization of Machining Parameters Affecting Thrust Force During Drilling of Pineapple Fiber Composite Plates – an Experimental Approach.” Journal of Natural Fibers 19 (5): 1729–1740. https://doi.org/10.1080/15440478.2020.1788484.
   Web of Science ®Google Scholar
• Mies, A., and S. Gold. 2021. “Mapping the Social Dimension of the Circular Economy.” Journal of Cleaner Production 321:128960. https://doi.org/10.1016/j.jclepro.2021.128960.
   Web of Science ®Google Scholar
• Mittal, V. K., and K. S. Sangwan. 2014. “Prioritizing Barriers to Green Manufacturing: Environmental, Social and Economic Perspectives.” Procedia CIRP 17:559–564. https://doi.org/10.1016/j.procir.2014.01.075.
   Google Scholar
• Mohsin, M., A. K. Rasheed, H. Sun, J. Zhang, R. Iram, N. Iqbal, and Q. Abbas. 2019. “Developing Low Carbon Economies: An Aggregated Composite Index Based on Carbon Emissions.” Sustainable Energy Technologies and Assessments 35:365–374. https://doi.org/10.1016/j.seta.2019.08.003.
   Web of Science ®Google Scholar
• Morkunas, M., and E. Rudienė. 2020. “The Impact of Social Servicescape Factors on Customers’ Satisfaction and Repurchase Intentions in Mid-Range Restaurants in Baltic States.” Journal of Open Innovation: Technology, Market, and Complexity 6 (3): 77. https://doi.org/10.3390/joitmc6030077.
   Google Scholar
• Nagalingam, A. P., B. L. Toh, and S. H. Yeo. 2023. “Surface Polishing of Laser Powder Bed Fused Inconel 625 Surfaces Using Multi-Jet Hydrodynamic Cavitation Abrasive Finishing: An Emerging Class of Cleaner Surface Enhancement Process.” International Journal of Precision Engineering and Manufacturing-Green Technology 10 (3): 637–657. https://doi.org/10.1007/s40684-022-00471-7.
   Web of Science ®Google Scholar
• Nara, E. O. B., M. B. da Costa, I. C. Baierle, J. L. Schaefer, G. B. Benitez, L. M. A. L. Do Santos, and L. B. Benitez. 2021. “Expected Impact of Industry 4.0 Technologies on Sustainable Development: A Study in the Context of Brazil’s Plastic Industry.” Sustainable Production and Consumption 25:102–122. https://doi.org/10.1016/j.spc.2020.07.018.
   Web of Science ®Google Scholar
• Nguyen, A.-T., V.-H. Nguyen, T.-T. Le, N.-T. Nguyen, and S. Ramesh. 2022. “Multiobjective Optimization of Surface Roughness and Tool Wear in High-Speed Milling of AA6061 by Machine Learning and NSGA-II.” Advances in Materials Science and Engineering 2022:1–21. https://doi.org/10.1155/2022/5406570.
   Web of Science ®Google Scholar
• Nor, F. M., F. A. Jafar, A. Jamri, W. N. I. Wan Md Hatta, and M. H. Abu Bakar 2020. “PLC Based Automated Coolant Supply System for Machining AISI 304L in CNC Milling”. In Intelligent Manufacturing and Mechatronics, Eds., 569–579. Springer Singapore. https://doi.org/10.1007/978-981-13-9539-0_54
   Google Scholar
• Obaideen, K., N. Shehata, E. T. Sayed, M. A. Abdelkareem, M. S. Mahmoud, and A. G. Olabi. 2022. “The role of wastewater treatment in achieving sustainable development goals (SDGs) and sustainability guideline.” Energy Nexus 7:100112. https://doi.org/10.1016/j.nexus.2022.100112.
   Google Scholar
• Oláh, J., N. Aburumman, J. Popp, M. A. Khan, H. Haddad, and N. Kitukutha. 2020. “Impact of Industry 4.0 on Environmental Sustainability.” Sustainability 12 (11): 4674. https://doi.org/10.3390/su12114674.
   Web of Science ®Google Scholar
• Olinto, A. C. 2014. “Vector Space Theory of Sustainability Assessment of Industrial Processes.” Clean Technologies and Environmental Policy 16 (8): 1815–1820. https://doi.org/10.1007/s10098-014-0729-4.
   Web of Science ®Google Scholar
• Ortega Del Rosario, M. D. L. Á., K. Beermann, and M. Chen Austin. 2023. “Environmentally Responsive Materials for Building Envelopes: A Review on Manufacturing and Biomimicry-Based Approaches.” Biomimetics 8 (1): 52. https://doi.org/10.3390/biomimetics8010052.
   PubMed Web of Science ®Google Scholar
• Padilla-Rivera, A., S. Russo-Garrido, and N. Merveille. 2020. “Addressing the Social Aspects of a Circular Economy: A Systematic Literature Review.” Sustainability 12 (19): 7912. https://doi.org/10.3390/su12197912.
   Web of Science ®Google Scholar
• Pata, U. K. 2021. “Linking Renewable Energy, Globalization, Agriculture, CO2 Emissions and Ecological Footprint in BRIC Countries: A Sustainability Perspective.” Renewable Energy 173:197–208. https://doi.org/10.1016/j.renene.2021.03.125.
   Web of Science ®Google Scholar
• Pathapalli, V. R., V. R. Basam, S. K. Gudimetta, and M. R. Koppula. 2019. “Optimization of Machining Parameters Using WASPAS and MOORA.” World Journal of Engineering 17 (2): 237–246. https://doi.org/10.1108/WJE-07-2019-0202.
   Web of Science ®Google Scholar
• Paturi, U. M. R., A. Yash, S. Teja Palakurthy, and N. S. Reddy. 2022. “Modeling and Optimization of Machining Parameters for Minimizing Surface Roughness and Tool Wear During AISI 52100 Steel Dry Turning.” Materials Today: Proceedings 50:1164–1172. https://doi.org/10.1016/j.matpr.2021.08.047.
   Google Scholar
• Pawanr, S., G. Kant Garg, and S. Routroy. 2019. “Multi-Objective Optimization of Machining Parameters to Minimize Surface Roughness and Power Consumption Using TOPSIS.” Procedia CIRP 86:116–120. https://doi.org/10.1016/j.procir.2020.01.036.
   Google Scholar
• Payal, H., E. Fekadu, A. Bhattacharya, S. Priyadarshini, and A. Mishra. 2023. “Optimization of Machining Parameters in EDM of Inconel 625 Using Taguchi Approach.” Materials Today: Proceedings 80:S1422–1428. https://doi.org/10.1016/j.matpr.2023.01.223.
   Google Scholar
• Pérez-Fernández, L., M. A. Sebastián, and C. González-Gaya. 2022. “Methodology to Optimize Quality Costs in Manufacturing Based on Multi-Criteria Analysis and Lean Strategies.” Applied Sciences 12 (7): 3295. https://doi.org/10.3390/app12073295.
   Google Scholar
• Peter, A. P., K. S. Khoo, K. W. Chew, T. C. Ling, S.-H. Ho, J.-S. Chang, and P. L. Show. 2021. “Microalgae for Biofuels, Wastewater Treatment and Environmental Monitoring.” Environmental Chemistry Letters 19 (4): 2891–2904. https://doi.org/10.1007/s10311-021-01219-6.
   Web of Science ®Google Scholar
• Pimenov, D. Y., M. Mia, M. K. Gupta, Á. R. Machado, G. Pintaude, D. R. Unune, N. Khanna, et al. 2022. “Resource Saving by Optimization and Machining Environments for Sustainable Manufacturing: A Review and Future Prospects.” Renewable and Sustainable Energy Reviews 166:112660. https://doi.org/10.1016/j.rser.2022.112660.
   Web of Science ®Google Scholar
• Pinto, L. 2020. “Green Supply Chain Practices and Company Performance in Portuguese Manufacturing Sector.” Business Strategy and the Environment 29 (5): 1832–1849. https://doi.org/10.1002/bse.2471.
   Web of Science ®Google Scholar
• Pinzon Amorocho, J. A., and T. Hartmann. 2022. “A Multi-Criteria Decision-Making Framework for Residential Building Renovation Using Pairwise Comparison and TOPSIS Methods.” Journal of Building Engineering 53:104596. https://doi.org/10.1016/j.jobe.2022.104596.
   Web of Science ®Google Scholar
• Qiao, K., K. Yu, B. Qu, J. Liang, H. Song, and C. Yue. 2022. “An Evolutionary Multitasking Optimization Framework for Constrained Multiobjective Optimization Problems.” IEEE Transactions on Evolutionary Computation 26 (2): 263–277. https://doi.org/10.1109/TEVC.2022.3145582.
   Web of Science ®Google Scholar
• Radha Krishnan, B., and M. Ramesh. 2020. “Optimization of Machining Process Parameters in CNC Turning Process of IS2062 E250 Steel Using Coated Carbide Cutting Tool.” Materials Today: Proceedings 21:346–350. https://doi.org/10.1016/j.matpr.2019.05.460.
   Google Scholar
• Rahmani, R., J. Karimi, P. R. Resende, J. C. C. Abrantes, and S. I. Lopes. 2023. “Overview of Selective Laser Melting for Industry 5.0: Toward Customizable, Sustainable, and Human-Centric Technologies.” Machines 11 (5): 522. https://doi.org/10.3390/machines11050522.
   Web of Science ®Google Scholar
• Rajak, S., and S. Vinodh. 2015. “Application of Fuzzy Logic for Social Sustainability Performance Evaluation: A Case Study of an Indian Automotive Component Manufacturing Organization.” Journal of Cleaner Production 108:1184–1192. https://doi.org/10.1016/j.jclepro.2015.05.070.
   Web of Science ®Google Scholar
• Rajemi, M. F., P. T. Mativenga, and A. Aramcharoen. 2010. “Sustainable Machining: Selection of Optimum Turning Conditions Based on Minimum Energy Considerations.” Journal of Cleaner Production 18 (10–11): 1059–1065. https://doi.org/10.1016/j.jclepro.2010.01.025.
   Web of Science ®Google Scholar
• Ram Prasad, A. V. S., K. Ramji, M. Kolli, and G. Vamsi Krishna. 2019. “Multi-Response Optimization of Machining Process Parameters for Wire Electrical Discharge Machining of Lead-Induced Ti-6Al-4V Alloy Using AHP–TOPSIS Method.” Journal of Advanced Manufacturing Systems 18 (2): 213–236. https://doi.org/10.1142/S0219686719500112.
   Web of Science ®Google Scholar
• “Report of the World Commission on Environment and Development.” n.d.-a. Accessed March 14, 2023 from https://digitallibrary.un.org/record/139811?ln=en.
   Google Scholar
• Roinioti, A., and C. Koroneos. 2019. “Integrated Life Cycle Sustainability Assessment of the Greek Interconnected Electricity System.” Sustainable Energy Technologies and Assessments 32:29–46. https://doi.org/10.1016/j.seta.2019.01.003.
   Web of Science ®Google Scholar
• Roslan, M. F., M. A. Hannan, P. J. Ker, M. Mannan, K. M. Muttaqi, and T. I. Mahlia. 2022. “Microgrid Control Methods Toward Achieving Sustainable Energy Management: A Bibliometric Analysis for Future Directions.” Journal of Cleaner Production 348:131340. https://doi.org/10.1016/j.jclepro.2022.131340.
   Web of Science ®Google Scholar
• Saad, M. H., M. A. Nazzal, and B. M. Darras. 2019. “A General Framework for Sustainability Assessment of Manufacturing Processes.” Ecological Indicators 97:211–224. https://doi.org/10.1016/j.ecolind.2018.09.062.
   Web of Science ®Google Scholar
• Sahoo, A. K., S. K. Sahoo, S. Pattanayak, and M. K. Moharana. 2023. “Ultrasonic Vibration Assisted Turning of Inconel 825: An Experimental Analysis.” Materials and Manufacturing Processes 38 (12): 1600–1614. https://doi.org/10.1080/10426914.2023.2165675.
   Web of Science ®Google Scholar
• Salvado, M., S. Azevedo, J. Matias, and L. Ferreira. 2015. “Proposal of a Sustainability Index for the Automotive Industry.” Sustainability 7 (2): 2113–2144. https://doi.org/10.3390/su7022113.
   Web of Science ®Google Scholar
• Sangwan, K. S., and V. K. Mittal. 2015. “A Bibliometric Analysis of Green Manufacturing and Similar Frameworks.” Management of Environmental Quality: An International Journal 26 (4): 566–587. https://doi.org/10.1108/MEQ-02-2014-0020.
   Google Scholar
• Sanjeevi, R., G. A. Kumar, and B. R. Krishnan. 2021. “Optimization of Machining Parameters in Plane Surface Grinding Process by Response Surface Methodology.” Materials Today: Proceedings 37:85–87. https://doi.org/10.1016/j.matpr.2020.04.075.
   Google Scholar
• Sartal, A., R. Bellas, A. M. Mejías, and A. García-Collado. 2020. “The Sustainable Manufacturing Concept, Evolution and Opportunities within Industry 4.0: A Literature Review.” Advances in Mechanical Engineering 12 (5): 168781402092523. https://doi.org/10.1177/1687814020925232.
   Web of Science ®Google Scholar
• Saxena, P., P. Stavropoulos, J. Kechagias, and K. Salonitis. 2020. “Sustainability Assessment for Manufacturing Operations.” Energies 13 (11): 2730. https://doi.org/10.3390/en13112730.
   Web of Science ®Google Scholar
• Schaltegger, S., M. Bennett, and R. Burritt (Eds.). (2006). Sustainability Accounting and Reporting. Springer.
   Google Scholar
• Schmidt, W.-P. 2006. “Life Cycle Tools within Ford of Europe’s Product Sustainability Index. Case Study Ford S-MAX & Ford Galaxy (8 Pp).” The International Journal of Life Cycle Assessment 11 (5): 315–322. https://doi.org/10.1065/lca2006.08.267.
   Web of Science ®Google Scholar
• Senthilkumar, K. M., R. Thirumalai, T. A. Selvam, A. Natarajan, and T. Ganesan. 2021. “Multi Objective Optimization in Machining of Inconel 718 Using Taguchi Method.” Materials Today: Proceedings 37:3466–3470. https://doi.org/10.1016/j.matpr.2020.09.333.
   Google Scholar
• Shah, D. R., N. Pancholi, H. Gajera, and B. Patel. 2022. “Investigation of Cutting Temperature, Cutting Force and Surface Roughness Using Multi-Objective Optimization for Turning of Ti-6Al-4 V (ELI).” Materials Today: Proceedings 50:1379–1388. https://doi.org/10.1016/j.matpr.2021.08.285.
   Google Scholar
• Shandilya, P., A. K. Rouniyar, and D. Saikiran. 2020. “Multi-Objective Parametric Optimization on Machining of Inconel-825 Using Wire Electrical Discharge Machining.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234 (20): 4056–4068. https://doi.org/10.1177/0954406220917706.
   Web of Science ®Google Scholar
• Sharma, R. C., V. Dabra, G. Singh, R. Kumar, R. P. Singh, and S. Sharma. 2022. “Multi-Response Optimization While Machining of Stainless Steel 316L Using Intelligent Approach of Grey Theory and Grey-TLBO.” World Journal of Engineering 19 (3): 329–339. https://doi.org/10.1108/WJE-06-2020-0226.
   Web of Science ®Google Scholar
• Sharma, S., U. K. Vates, and A. Bansal. 2021. “Optimization of Machining Characteristics for EDM of Different Nickel-Based Alloys by Embodying of Fuzzy, Grey Relational and Taguchi Technique.” World Journal of Engineering 18 (1): 23–36. https://doi.org/10.1108/WJE-07-2020-0262.
   Web of Science ®Google Scholar
• Simpson, A., and A. Tamayo. 2020. “Real Effects of Financial Reporting and Disclosure on Innovation.” Accounting and Business Research 50 (5): 401–421. https://doi.org/10.1080/00014788.2020.1770926.
   Web of Science ®Google Scholar
• Singh, A. K., A. Kumar, V. Sharma, and P. Kala. 2020. “Sustainable Techniques in Grinding: State of the Art Review.” Journal of Cleaner Production 269:121876. https://doi.org/10.1016/j.jclepro.2020.121876.
   Web of Science ®Google Scholar
• Singh, R. K., H. R. Murty, S. K. Gupta, and A. K. Dikshit. 2009. “An Overview of Sustainability Assessment Methodologies.” Ecological Indicators 9 (2): 189–212. https://doi.org/10.1016/j.ecolind.2008.05.011.
   Web of Science ®Google Scholar
• Singh Sivam, S. P. S., R. Rajendran, and N. Harshavardhana. 2022. “An Investigation of Hybrid Models FEA Coupled with AHP-ELECTRE, RSM-GA, and ANN-GA into the Process Parameter Optimization of High-Quality Deep-Drawn Cylindrical Copper Cups.” Mechanics Based Design of Structures and Machines 1–25. https://doi.org/10.1080/15397734.2022.2120497.
   Web of Science ®Google Scholar
• Sivarupan, T., N. Balasubramani, P. Saxena, D. Nagarajan, M. El Mansori, K. Salonitis, M. Jolly, and M. S. Dargusch. 2021. “A Review on the Progress and Challenges of Binder Jet 3D Printing of Sand Moulds for Advanced Casting.” Additive Manufacturing 40:101889. https://doi.org/10.1016/j.addma.2021.101889.
   Web of Science ®Google Scholar
• Somasundaram, M., J. Pradeep Kumar, and M. Mathan. 2020. “Investigation on Surface Integrity, Machining and Form Tolerance Characteristics Using TOPSIS Approach for Electrical Discharge Machining of Biocompatible Material.” Materials Today: Proceedings 22:1853–1860. https://doi.org/10.1016/j.matpr.2020.03.020.
   Google Scholar
• Soori, M., and B. Arezoo. 2023. “Minimization of Surface Roughness and Residual Stress in Abrasive Water Jet Cutting of Titanium Alloy Ti6Al4V.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 095440892311579. https://doi.org/10.1177/09544089231157972.
   Web of Science ®Google Scholar
• Spiering, T., S. Kohlitz, H. Sundmaeker, and C. Herrmann. 2015. “Energy Efficiency Benchmarking for Injection Moulding Processes.” Robotics and Computer-Integrated Manufacturing 36:45–59. https://doi.org/10.1016/j.rcim.2014.12.010.
   Web of Science ®Google Scholar
• Sproesser, G., S. Schenker, A. Pittner, R. Borndörfer, M. Rethmeier, Y.-J. Chang, and M. Finkbeiner. 2016. “Sustainable Welding Process Selection Based on Weight Space Partitions.” Procedia CIRP 40:127–132. https://doi.org/10.1016/j.procir.2016.01.077.
   Google Scholar
• Tracking Industrial Energy Efficiency and CO2 Emissions – Analysis—IEA. (n.d.-b.). Accessed March 15, 2023, from https://www.iea.org/reports/tracking-industrial-energy-efficiency-and-co2-emissions
   Google Scholar
• Transforming our World: The 2030 Agenda for Sustainable Development .:. Sustainable Development Knowledge Platform. (n.d.). Accessed March 14, 2023, from https://sustainabledevelopment.un.org/post2015/transformingourworld/publication
   Google Scholar
• Vats, P., T. Singh, V. Dubey, and A. Kumar Sharma. 2022. “Optimization of Machining Parameters in Turning of AISI 1040 Steel Using Hybrid MCDM Technique.” Materials Today: Proceedings 50:1758–1765. https://doi.org/10.1016/j.matpr.2021.09.188.
   Google Scholar
• Verl, A., A. Valente, S. Melkote, C. Brecher, E. Ozturk, and L. T. Tunc. 2019. “Robots in Machining.” CIRP Annals 68 (2): 799–822. https://doi.org/10.1016/j.cirp.2019.05.009.
   Web of Science ®Google Scholar
• Vishnu, V. S., K. G. Varghese, and B. Gurumoorthy. 2023. “A Data-Driven Digital Twin Framework for Key Performance Indicators in CNC Machining Processes.” International Journal of Computer Integrated Manufacturing 1–19. https://doi.org/10.1080/0951192X.2023.2177741.
   Web of Science ®Google Scholar
• Welford, R., Ed. 2016. Corporate Environmental Management 1: Systems and Strategies. 0 ed. Routledge. https://doi.org/10.4324/9781315825120.
   Google Scholar
• Wong, C. 2014. “Sustainable Development Indicators.” In Encyclopedia of Quality of Life and Well-Being Research, edited by A. C. Michalos, 6504–6507. Springer Netherlands. https://doi.org/10.1007/978-94-007-0753-5_2948.
   Google Scholar
• Wu, T.-Y., and C.-C. Lin. 2021. “Optimization of Machining Parameters in Milling Process of Inconel 718 under Surface Roughness Constraints.” Applied Sciences 11 (5): 2137. https://doi.org/10.3390/app11052137.
   Google Scholar
• Wu, Y.-F., S. M. S. Kazmi, M. J. Munir, Y. Zhou, and F. Xing. 2020. “Effect of Compression Casting Method on the Compressive Strength, Elastic Modulus and Microstructure of Rubber Concrete.” Journal of Cleaner Production 264:121746. https://doi.org/10.1016/j.jclepro.2020.121746.
   Web of Science ®Google Scholar
• Xiao, G., Y. He, Y. Huang, Y. Liu, W. Dai, and L. Quan. 2019. “Integration of Heterogeneous System Information in Machining-Detection Logistics for Titanium Alloy Blade with Adaptive Belt Grinding.” International Journal of Computer Integrated Manufacturing 32 (9): 900–917. https://doi.org/10.1080/0951192X.2019.1644479.
   Web of Science ®Google Scholar
• Xie, S., Z. He, C. Wang, C. Liu, and X. Ke. 2023. “A Generic Evolutionary Ensemble Learning Framework for Surface Roughness Prediction in Manufacturing.” International Journal of Computer Integrated Manufacturing 36 (11): 1572–1594. https://doi.org/10.1080/0951192X.2023.2204486.
   Web of Science ®Google Scholar
• Yadegaridehkordi, E., M. Hourmand, M. Nilashi, E. Alsolami, S. Samad, M. Mahmoud, A. A. Alarood, A. Zainol, H. D. Majeed, and L. Shuib. 2020. “Assessment of Sustainability Indicators for Green Building Manufacturing Using Fuzzy Multi-Criteria Decision Making Approach.” Journal of Cleaner Production 277:122905. https://doi.org/10.1016/j.jclepro.2020.122905.
   Web of Science ®Google Scholar
• Yaka, H. 2021. “MEASUREMENT OF SURFACE QUALITY AND OPTIMIZATION OF CUTTING PARAMETERS IN SLOT MILLING OF GFRP COMPOSITE MATERIALS WITH DIFFERENT FIBER RATIOS PRODUCED BY PULTRUSION METHOD.” Surface Review and Letters 28 (10): 2150095. https://doi.org/10.1142/S0218625X21500955.
   Web of Science ®Google Scholar
• Yale Center For Environmental Law And Policy-YCELP-Yale University, Center For International Earth Science Information Network-CIESIN-Columbia University, & World Economic Forum-WEF. 2006. Pilot 2006 Environmental Performance Index (EPI) [ Data set]. Palisades, NY:NASA Socioeconomic Data and Applications Center (SEDAC). https://doi.org/10.7927/H44M92GX
   Google Scholar
• Yan, X., S. Dong, X. Li, Z. Zhao, S. Dong, and L. An. 2021. “Optimization of Machining Parameters for Milling Zirconia Ceramics by Polycrystalline Diamond Tool.” Materials 15 (1): 208. https://doi.org/10.3390/ma15010208.
   PubMed Web of Science ®Google Scholar
• Ye, W., W. Shen, Z. Qian, and J. Zheng. 2022. “Robust Longitudinal Motion Control of Underground Mining Electric Vehicles Based on Fuzzy Parameter Tuning Sliding Mode Controller.” Computers & Electrical Engineering 98:107683. https://doi.org/10.1016/j.compeleceng.2022.107683.
   Web of Science ®Google Scholar
• Zamfirache, I. A., R.-E. Precup, R.-C. Roman, and E. M. Petriu. 2022. “Reinforcement Learning-Based Control Using Q-Learning and Gravitational Search Algorithm with Experimental Validation on a Nonlinear Servo System.” Information Sciences 583:99–120. https://doi.org/10.1016/j.ins.2021.10.070.
   Web of Science ®Google Scholar
• Zarrouk, T., M. Nouari, J.-E. Salhi, H. Makich, M. Salhi, S. Atlati, and N. Salhi. 2022. “Optimization of the Milling Process for Aluminum Honeycomb Structures.” The International Journal of Advanced Manufacturing Technology 119 (7–8): 4733–4744. https://doi.org/10.1007/s00170-021-08495-0.
   Web of Science ®Google Scholar
• Zhou, G., Q. Lu, Z. Xiao, C. Zhou, and C. Tian. 2019. “Cutting Parameter Optimization for Machining Operations Considering Carbon Emissions.” Journal of Cleaner Production 208:937–950. https://doi.org/10.1016/j.jclepro.2018.10.191.
   Web of Science ®Google Scholar