Mechanical recycling of carbon fibre reinforced polymers. Part 1: influence of cutting speed on recycled particles and composites properties

References

• Alghadi, A. M., S. Tirkes, and U. Tayfun. 2020. “Mechanical, Thermo-Mechanical and Morphological Characterization of ABS Based Composites Loaded with Perlite Mineral.” Materials Research Express 7:015301. https://doi.org/10.1088/2053-1591/ab551b.
   Google Scholar
• Alonso, A., M. Lázaro, D. Lázaro, and D. Alvear. 2023. “Thermal Characterization of Acrylonitrile Butadiene Styrene-ABS Obtained with Different Manufacturing Processes.” Journal of Thermal Analysis and Calorimetry 148:10557–10572. https://doi.org/10.1007/s10973-023-12258-2.
   Web of Science ®Google Scholar
• Arif, Z. U., M. Yasir Khalid, W. Ahmed, H. Arshad, and S. Ullah. 2022. “Recycling of the Glass/Carbon Fibre Reinforced Polymer Composites: A Step Towards the Circular Economy.” Polymer-Plastics Technology & Materials 61 (7): 761–788. https://doi.org/10.1080/25740881.2021.2015781.
   Web of Science ®Google Scholar
• Boğa, C. 2021. “Investigation of Mechanical and Fracture Behavior of Pure and Carbon Fiber Reinforced ABS Samples Processed by Fused Filament Fabrication Process.” Rapid Prototyping Journal 27 (6): 1220–1229. https://doi.org/10.1108/RPJ-11-2020-0296.
   Web of Science ®Google Scholar
• Burelo, M., A. Martínez, J. David Hernández-Varela, T. Stringer, M. Ramírez-Melgarejo, A. Y. Yau, G. Luna-Bárcenas, and C. D. Treviño-Quintanilla. 2024. “Recent Developments in Synthesis, Properties, Applications and Recycling of Bio-Based Elastomers.” Molecules 29 (2): 387. https://doi.org/10.3390/molecules29020387.
   PubMed Web of Science ®Google Scholar
• Caltagirone, P. E., R. S. Ginder, S. Ozcan, K. Li, A. M. Gay, J. Stonecash, K. X. Steirer, et al. 2021. “Substitution of Virgin Carbon Fiber with Low-Cost Recycled Fiber in Automotive Grade Injection Molding Polyamide 66 for Equivalent Composite Mechanical Performance with Improved Sustainability.” Composites Part B: Engineering 221:109007. https://doi.org/10.1016/j.compositesb.2021.109007.
   Web of Science ®Google Scholar
• Franco-Urquiza, E. A., J. F. May-Crespo, C. A. Escalante Velázquez, R. Pérez Mora, and P. González García. 2020. “Thermal Degradation Kinetics of ZnO/Polyester Nanocomposites.” Polymers 12:1753. https://doi.org/10.3390/POLYM12081753.
   PubMed Web of Science ®Google Scholar
• Franco-Urquiza, E. A., and A. V. Rentería-Rodríguez. 2023. “Effect of Nanoparticles on the Mechanical Properties of Kenaf Fiber-Reinforced Bio-Based Epoxy Resin.” Textile Research Journal 91 (11–12): 1313–1325. https://doi.org/10.1177/0040517520980459.
   Web of Science ®Google Scholar
• Franco-Urquiza, E. A. 2021. “Clay-Based Polymer Nanocomposites: Essential Work of Fracture.” Polymers 13 (15): 2399. https://doi.org/10.3390/polym13152399.
   PubMed Web of Science ®Google Scholar
• Franco-Urquiza, E. A., J. Cailloux, O. Santana, M. Lluisa Maspoch, and J. Cesar Velazquez Infante. 2015. “The Influence of the Clay Particles on the Mechanical Properties and Fracture Behavior of Pla/o-MMT Composite Films.” Advances in Polymer Technology 34:21470. https://doi.org/10.1002/ADV.21470.
   Web of Science ®Google Scholar
• ISO. 2019. “ISO 527-1:2019 Plastics – Determination of Tensile Properties – Part 1: General Principles.”
   Google Scholar
• Kazi, M., M. Billah, A. R. L. Fernando, N. L. Martinez, S. Chacon, R. B. Wicker, and D. Espalin. 2019. “Thermal Analysis of Thermoplastic Materials Filled with Chopped Fiber for Large Area 3D Printing.” Solid Freeform Fabrication Symposium: 892–898. https://doi.org/10.26153/TSW/17325.
   Google Scholar
• Khalid, M. Y., A. Al Rashid, Z. Ullah Arif, W. Ahmed, H. Arshad, and A. Ali Zaidi. 2021. “Natural Fiber Reinforced Composites: Sustainable Materials for Emerging Applications.” Results in Engineering 11:100263. https://doi.org/10.1016/j.rineng.2021.100263.
   Google Scholar
• Khalid, M. Y., Z. Ullah Arif, W. Ahmed, and H. Arshad. 2022. “Recent Trends in Recycling and Reusing Techniques of Different Plastic Polymers and Their Composite Materials.” Sustainable Materials and Technologies 31:e00382. https://doi.org/10.1016/j.susmat.2021.e00382.
   Web of Science ®Google Scholar
• Khalid, M. Y., Z. Ullah Arif, M. Hossain, and R. Umer. 2023. “Recycling of Wind Turbine Blades Through Modern Recycling Technologies: A Road to Zero Waste.” Renewable Energy Focus 44:373–389. https://doi.org/10.1016/j.ref.2023.02.001.
   Google Scholar
• Kim, K.-W., D.-K. Kim, W. Han, and B.-J. Kim. 2022. “Comparison of the Characteristics of Recycled Carbon Fibers/Polymer Composites by Different Recycling Techniques.” Molecules 27 (17): 5663. https://doi.org/10.3390/molecules27175663.
   PubMed Web of Science ®Google Scholar
• Kornilitsina, E. V., E. A. Lebedeva, D. K. Trukhinov, S. A. Astaf’eva, and M. Balashoyu. 2023. “The Influence of Functional Additives on the Mechanical Properties of ABS Plastic.” Polymer Science, Series D 16 (3): 572–575. https://doi.org/10.1134/S1995421223030140.
   Google Scholar
• Manuel, B., J. David Hernández-Varela, D. I. Medina, and C. D. Treviño-Quintanilla. 2023. “Recent Developments in Bio-Based Polyethylene: Degradation Studies, Waste Management and Recycling.” Heliyon 9 (11): e21374. https://doi.org/10.1016/j.heliyon.2023.e21374.
   PubMed Web of Science ®Google Scholar
• Maspoch, M. L., E. Franco‐Urquiza, J. Gamez‐Perez, O. O. Santana, and M. Sánchez‐Soto. 2009. “Fracture Behaviour of Poly[ethylene–(Vinyl Alcohol)]/organo‐Clay Composites.” Polymer International 58 (6): 648–655. https://doi.org/10.1002/pi.2574.
   Web of Science ®Google Scholar
• Moreno-Núñez, B. A., C. Gustavo Abarca-Vidal, C. D. Treviño-Quintanilla, U. Sánchez-Santana, E. Cuan-Urquizo, and E. Uribe-Lam. 2023. “Experimental Analysis of Fiber Reinforcement Rings’ Effect on Tensile and Flexural Properties of OnyxTM–Kevlar® Composites Manufactured by Continuous Fiber Reinforcement.” Polymers 15:1252. https://doi.org/10.3390/POLYM15051252.
   PubMed Web of Science ®Google Scholar
• Rani, M., P. Choudhary, V. Krishnan, and S. Zafar. 2021. “A Review on Recycling and Reuse Methods for Carbon Fiber/Glass Fiber Composites Waste from Wind Turbine Blades.” Composites Part B: Engineering 215:108768. https://doi.org/10.1016/j.compositesb.2021.108768.
   Web of Science ®Google Scholar
• Rodríguez-González, J. A., V. Renteria-Rodríguez, C. Rubio-González, and E. A. Franco-Urquiza. 2024. “Spray-Coating of Graphene Nanoplatelets on Sisal Fibers and Its Influence on Electromechanical Behavior of Biocomposite Laminates.” Journal of Reinforced Plastics and Composites 43 (1–2): 3–15. https://doi.org/10.1177/07316844231152911.
   Web of Science ®Google Scholar
• Valino, A. D., J. R. C. Dizon, A. H. Espera, Q. Chen, J. Messman, and R. C. Advincula. 2019. “Advances in 3D Printing of Thermoplastic Polymer Composites and Nanocomposites.” Progress in Polymer Science 98:101162. https://doi.org/10.1016/j.progpolymsci.2019.101162.
   Web of Science ®Google Scholar
• van de Werken, M. S. R. Nekoda, M. R. Taha, and M. Tehrani. 2019. “Investigating the Effects of Fiber Surface Treatment and Alignment on Mechanical Properties of Recycled Carbon Fiber Composites.” Composites Part A: Applied Science and Manufacturing 119:38–47. https://doi.org/10.1016/j.compositesa.2019.01.012.
   Web of Science ®Google Scholar
• Wei, H., W. Nagatsuka, H. Lee, I. Ohsawa, K. Sumimoto, Y. Wan, and J. Takahashi. 2018. “Mechanical Properties of Carbon Fiber Paper Reinforced Thermoplastics Using Mixed Discontinuous Recycled Carbon Fibers.” Advanced Composite Materials 27 (1): 19–34. https://doi.org/10.1080/09243046.2017.1334274.
   Web of Science ®Google Scholar
• Witik, R. A., R. Teuscher, V. Michaud, C. Ludwig, and J. A. E. Månson. 2013. “Carbon Fibre Reinforced Composite Waste: An Environmental Assessment of Recycling, Energy Recovery and Landfilling.” Composites Part A: Applied Science and Manufacturing 49:89–99. https://doi.org/10.1016/j.compositesa.2013.02.009.
   Web of Science ®Google Scholar
• Zhang, J., V. S. Chevali, H. Wang, and C.-H. Wang. 2020. “Current Status of Carbon Fibre and Carbon Fibre Composites Recycling.” Composites Part B: Engineering 193:108053. https://doi.org/10.1016/j.compositesb.2020.108053.
   Web of Science ®Google Scholar