Impact of multiple recycling on the dimensional stability of wood–plastic composite made by the injection moulding process

References

• Acheampong JB, de Angelis M, Krause A, Meincken M. 2021. The effect of raw material selection on physical and mechanical properties of wood plastic composites made from recycled LDPE and wood from invasive trees in South Africa. Wood Mater Sci Eng. 16(2):118–123. doi:10.1080/17480272.2019.1635207.
   Web of Science ®Google Scholar
• Azad R, Shahrajabian H. 2019. Experimental study of warpage and shrinkage in injection molding of HDPE/rPET/wood composites with multiobjective optimization. Mater Manuf Process. 34(3):274–282. doi:10.1080/10426914.2018.1512123.
   Web of Science ®Google Scholar
• Benoit N, González-Núñez R, Rodrigue D. 2017. High density polyethylene degradation followed by closedloop recycling. Prog Rubber Plast Recycl Technol. 33(1):17–37. doi:10.1177/147776061703300102.
   Web of Science ®Google Scholar
• Čermák R, Obadal M, Ponížil P, Polášková M, Stoklasa K, Lengálová A. 2005. Injection-moulded α- and β-polypropylenes: I. Structure vs. processing parameters. Eur Polym J. 41(8):1838–1845. doi:10.1016/j.eurpolymj.2005.02.020.
   Web of Science ®Google Scholar
• Chen T, Baird DG. 2020. The influence of mehcanical recycling on the mechanical and thermal properties of thermotropic liquid crystalline polymer and glass fiber reinforced polyproplyene. Annual Technical Conference - ANTEC, Conference Proceedings 2(June); p. 562–566.
   Google Scholar
• Chen WC, Nguyen MH, Chiu WH, Chen TN, Tai PH. 2016. The effect of recycling on wood-fiber thermoplastic composites. Int J Adv Manuf Technol. 83(9–12):1873–1886. doi:10.1007/s00170-015-7683-0.
   Web of Science ®Google Scholar
• Chiu HT, Huang JK, Kuo MT, Huang JH. 2018. Characterisation of PC/ABS blend during 20 reprocessing cycles and subsequent functionality recovery by virgin additives. J Polym Res. 25(124):1–8. doi:10.1007/s10965-018-1522-6.
   Google Scholar
• Derakhshandeh M, Hatzikiriakos SG. 2012. Flow-induced crystallization of high-density polyethylene: the effects of shear and uniaxial extension. Rheol Acta. 51(4):315–327. doi:10.1007/s00397-011-0605-7.
   Web of Science ®Google Scholar
• Hamad K, Kaseem M, Deri F. 2013. Recycling of waste from polymer materials: an overview of the recent works. Polym Degrad Stab. 98(12):2801–2812. doi:10.1016/j.polymdegradstab.2013.09.025.
   Web of Science ®Google Scholar
• Hamarat I, Kuram E, Ozcelik B. 2018. Investigation the mechanical, rheological, and morphological properties of acrylonitrile butadiene styrene blends with different recycling number content. Proc Inst Mech Eng Part E J Process Mech Eng. 232(4):449–458. doi:10.1177/0954408917717994.
   Web of Science ®Google Scholar
• Janeschitz-Kriegl H, Ratajski E. 2005. Kinetics of polymer crystallization under processing conditions: transformation of dormant nuclei by the action of flow. Polymer (Guildf). 46(11):3856–3870. doi:10.1016/j.polymer.2005.02.096.
   Web of Science ®Google Scholar
• Jin H, Gonzalez-Gutierrez J, Oblak P, Zupančič B, Emri I. 2012. The effect of extensive mechanical recycling on the properties of low density polyethylene. Polym Degrad Stab. 97(11):2262–2272. doi:10.1016/j.polymdegradstab.2012.07.039.
   Web of Science ®Google Scholar
• Kajaks J, Kalnins K, Naburgs R. 2018. Wood plastic composites (WPC) based on high-density polyethylene and birch wood plywood production residues. Int Wood Prod J. 9(1):15–21. doi:10.1080/20426445.2017.1410997.
   Web of Science ®Google Scholar
• Khanjanzadeh H, Tabarsa T, Shakeri A, Omidvar A. 2011. Effect of organoclay platelets on the mechanical properties of wood-plastic composites formulated with virgin and recycled polypropylene. Wood Mater Sci Eng. 6(4):207–212. doi:10.1080/17480272.2011.606915.
   Google Scholar
• Kitayama S, Miyakawa H, Takano M, Aiba S. 2017. Multi-objective optimization of injection molding process parameters for short cycle time and warpage reduction using conformal cooling channel. Int J Adv Manuf Technol. 88(5–8):1735–1744. doi:10.1007/s00170-016-8904-x.
   Web of Science ®Google Scholar
• Kuka E, Cirule D, Kajaks J, Andersone I, Andersons B. 2016. Wood plastic composites made with thermally modified birch wood residues. Int Wood Prod J. 7(4):225–230. doi:10.1080/20426445.2016.1214439.
   Web of Science ®Google Scholar
• Le MC, Belhabib S, Nicolazo C, Vachot P, Mousseau P, Sarda A, Deterre R. 2011. Pressure influence on crystallization kinetics during injection molding. J Mater Process Technol. 211(11):1757–1763. doi:10.1016/j.jmatprotec.2011.05.017.
   Web of Science ®Google Scholar
• Lellinger D, Floudas G, Alig I. 2003. Shear induced crystallization in poly(ϵ-caprolactone): effect of shear rate. Polymer (Guildf). 44(19):5759–5769. doi:10.1016/S0032-3861(03)00633-5.
   Web of Science ®Google Scholar
• Li X, Wei Q, et al. 2019. Numerical simulation on crystallization-induced warpage of injection-molded PP/EPDM part. J Polym Res. 26(228):1–11. doi:10.1007/s10965-019-1869-3.
   Google Scholar
• Montanes N, Quiles-Carrillo L, Ferrandiz S, Fenollar O, Boronat T. 2019. Effects of lignocellulosic fillers from waste thyme on melt flow behavior and processability of wood plastic composites (WPC) with biobased poly(ethylene) by injection molding. J Polym Environ. 27(4):747–756. doi:10.1007/s10924-019-01388-0.
   Web of Science ®Google Scholar
• Mukras SMS. 2020. Experimental-based optimization of injection molding process parameters for short product cycle time. Adv Polym Technol. 2020:1–15. doi:10.1155/2020/1309209.
   Web of Science ®Google Scholar
• Oblak P, Gonzalez-Gutierrez J, Zupančič B, Aulova A, Emri I. 2016. Processability and rheological properties of extensively recycled high density polyethylene (HDPE). 33rd Danubia Adria Symp Adv Exp Mech. 114:194–195.
   Google Scholar
• Taghavi SK, Shahrajabian H, Hosseini HM. 2018. Detailed comparison of compatibilizers MAPE and SEBS-g-MA on the mechanical/thermal properties, and morphology in ternary blend of recycled PET/HDPE/MAPE and recycled PET/HDPE/SEBS-g-MA. J Elastomers Plast. 50(1):13–35. doi:10.1177/0095244317698738.
   Web of Science ®Google Scholar
• Twite-Kabamba E, Rodrigue D. 2010. Rheological and molecular investigations of polyethylene degradation in a batch mixer. Int Polym Process. 25(4):297–303. doi:10.3139/217.2365.
   Web of Science ®Google Scholar
• Vidakis N, Petousis M, Tzounis L, Grammatikos SA, Porfyrakis E, Maniadi A, Mountakis N. 2021. Sustainable additive manufacturing: mechanical response of polyethylene terephthalate glycol over multiple recycling processes. Materials (Basel). 14(5):1–16. doi:10.3390/ma14051162.
   Web of Science ®Google Scholar
• Zhuo G, Zhang X, Liu Y, Wang M. 2019. Effect of multiple recycling on properties of poplar fiber reinforced high density polyethylene wood-plastic composites. Mater Res Express. 6(12):125514. doi:10.1088/2053-1591/ab5742.
   Web of Science ®Google Scholar