Characterization of Grewia bicolor fibre and its use in the development of composites

References

• Almeshaal M, Palanisamy S, Murugesan TM, Palaniappan M, Santulli C. 2022. Physico-chemical characterization of Grewia Monticola Sond (GMS) fibers for prospective application in biocomposites. J Nat Fibres. 19(17):15276–15290. doi:10.1080/15440478.2022.2123076.
   Web of Science ®Google Scholar
• Alsubari S, Zuhri MYM, Sapuan SM, Ishak MR, Ilyas RA, Asyraf MRM. 2021. Potential of natural fiber reinforced polymer composites in sandwich structures: a review on Its mechanical properties. Polymers (Basel). 13:423. doi:10.3390/polym13030423.
   PubMed Web of Science ®Google Scholar
• Amiri A, Triplett Z, Moreira A, Brezinka N, Alcock M, Ulven CA. 2017. Standard density measurement method development for flax fiber. Ind Crops Prod. 96:196–202. doi:10.1016/j.indcrop.2016.11.060.
   Web of Science ®Google Scholar
• Asim M, Abdan K, Jawaid M, Nasir M, Dashtizadeh Z, Ishak M, Hoque ME. 2015. A review on pineapple leaves fibre and its composites. Int J Polym Sci. 2015:950567. doi:10.1155/2015/950567.
   Web of Science ®Google Scholar
• Bajakke PA, Malik VR, Jambagi SC, Deshpande AS. 2020. Corrosion behavior of novel AA1050/ZnO surface composite: a potential material for ship hull. Mater Lett. 281:128602. doi:10.1016/j.matlet.2020.128602.
   Web of Science ®Google Scholar
• Baley C, Busnel F, Grohens Y, Sire O. 2006. Influence of chemical treatments on surface properties and adhesion of flax fibre–polyester resin. Comp Part A: Appl Sci Manufact. 37:1626–1637. doi:10.1016/j.compositesa.2005.10.014.
   Web of Science ®Google Scholar
• Baley C, Lamy B. 2000. Propriétés mécaniques des fibres de lin utilisées comme renforts de matériaux composites. Rev Compos Matér Avancés. 10:7–24.
   Google Scholar
• Béakou A, Ntenga R, Lepetit J, Atéba JA, Ayina LO. 2008. Physico-chemical and microstructural characterization of ‘rhectophyllum camerunense’ plant fiber. Comp Part A: Appl Sci Manufact. 39:67–74. doi:10.1016/j.compositesa.2007.09.002.
   Web of Science ®Google Scholar
• Betené ADO, Betené EF, Ngali EFP, Noah PMA, Ndiwé B, Soppie AG, Atangana A, Moukené R. 2022. Influence of sampling area and extraction method on the thermal, physical and mechanical properties of Cameroonian Ananas comosus leaf fibers. Heliyon. 8(8):e10127. doi:10.1016/j.heliyon.2022.e10127.
   PubMed Web of Science ®Google Scholar
• Betene ADO, Betene FE, Martoïa F, Dumont PJ, Atangana A, Noah PMA. 2020. Physico-Chemical and thermal characterization of some lignocellulosic fibres: ananas comosus (AC), neuropeltis acuminatas (NA) and rhecktophyllum camerunense (RC). J. Miner Mater Charact Eng. 8:205–222.
   Google Scholar
• Bilba K, Arsene M, Ouensanga A. 2007. Study of banana and coconut fibersBotanical composition, thermal degradation and textural observations. Bioresour Technol. 98:58–68. doi:10.1016/j.biortech.2005.11.030.
   PubMed Web of Science ®Google Scholar
• Charlet K, Baley C, Morvan C, Jernot JP, Gomina M, Bréard J. 2007. Characteristics of Hermès flax fibres as a function of their location in the stem and properties of the derived unidirectional composites. Compos Part A: Appl Sci Manufact. 38:1912–1921. doi:10.1016/j.compositesa.2007.03.006.
   Web of Science ®Google Scholar
• Costa-Neves L, da Silva JS, De Lima L, Jordão S. 2014. Multi-storey, multi-bay buildings with composite steel-deck floors under human-induced loads: the human comfort issue. Comput Struct. 136:34–46. doi:10.1016/j.compstruc.2014.01.027.
   Web of Science ®Google Scholar
• Cotugno S, Larobina D, Mensitieri G, Musto P, Ragosta G. 2001. A novel spectroscopic approach to investigate transport processes in polymers: the case of water–epoxy system. Polymer. 42:6431–6438. doi:10.1016/S0032-3861(01)00096-9.
   Web of Science ®Google Scholar
• Das M, Sahu S, Parhi D. 2020. Composite materials and their damage detection using AI techniques for aerospace application: a brief review. Materials Today: Proceedings. 44:955–960. doi:10.1016/j.matpr.2020.11.005.
   Google Scholar
• De Rosa IM, Kenny JM, Puglia D, Santulli C, Sarasini F. 2010. Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites. Compos Sci Technol. 70:116–122. doi:10.1016/j.compscitech.2009.09.013.
   Web of Science ®Google Scholar
• Dubille M. 2008. Sediment transport and abrasion in bedrock rivers: from measurements to models on an Himalayan example [PhD Thesis], University of Grenoble I-Joseph Fourier, France, 393 p.
   Google Scholar
• Edeerozey AM, Akil HM, Azhar A, Ariffin MZ. 2007. Chemical modification of kenaf fibers. Mater Lett. 61:2023–2025. doi:10.1016/j.matlet.2006.08.006.
   Web of Science ®Google Scholar
• Essabir H, Boujmal R, Bensalah MO, Rodrigue D, Bouhfid R, Qaiss Aek. 2016. Mechanical and thermal properties of hybrid composites: oil-palm fiber/clay reinforced high density polyethylene. Mech Mater. 98:36–43. doi:10.1016/j.mechmat.2016.04.008.
   Web of Science ®Google Scholar
• Faruk O, Bledzki AK, Fink H-P, Sain M. 2012. Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci. 37:1552–1596. doi:10.1016/j.progpolymsci.2012.04.003.
   Web of Science ®Google Scholar
• Fogorasi M, Barbu I. 2017. The potential of natural fibres for automotive sector - review. IOP Conf Ser: Mater Sci Eng. 252:012044. doi:10.1088/1757-899X/252/1/012044.
   Google Scholar
• George M, Chae M, Bressler DC. 2016. Composite materials with bast fibres: structural, technical, and environmental properties. Prog Mater Sci. 83:1–23. doi:10.1016/j.pmatsci.2016.04.002.
   Web of Science ®Google Scholar
• Granqvist CG, Arvizu MA, Pehlivan İB, Qu H-Y, Wen R-T, Niklasson GA. 2018. Electrochromic materials and devices for energy efficiency and human comfort in buildings: a critical review. Electrochim Acta. 259:1170–1182. doi:10.1016/j.electacta.2017.11.169.
   Web of Science ®Google Scholar
• Hamza S, Saad H, Charrier B, Ayed N, Charrier-El Bouhtoury F. 2013. Physico-chemical characterization of Tunisian plant fibers and its utilization as reinforcement for plaster based composites. Ind Crops Prod. 49:357–365. doi:10.1016/j.indcrop.2013.04.052.
   Web of Science ®Google Scholar
• Jaspers MWJM, Bashir AK, Zwaving JH, Malingre TM. 1986. Investigation of Grewia bicolor juss. J Ethnopharmacol. 17:205–211. doi:10.1016/0378-8741(86)90109-1.
   PubMed Web of Science ®Google Scholar
• Jayaramudu J, Guduri BR, Rajulu AV. 2010. Characterization of new natural cellulosic fabric Grewia tilifolia. Carbohydr Polym. 79(4):847–851. doi:10.1016/j.carbpol.2009.10.046.
   Web of Science ®Google Scholar
• Koniuszewska AG, Kaczmar JW. 2016. Application of polymer based composite materials in transportation. Prog Rubber, Plast Recyc Techn. 32:1–24. doi:10.1177/147776061603200101.
   Web of Science ®Google Scholar
• Kossoumna Liba’a N. 2008. De la mobilité à la sédentarisation: gestion des ressources naturelles et des territoires par les éleveurs Mbororo au Nord du Cameroun [PhD Thesis). UPV.
   Google Scholar
• Kushwaha S, Bagha AK. 2020. Application of composite materials for vibroacoustic – a review. Mater Today Proc. 26:1567–1571. doi:10.1016/j.matpr.2020.02.321.
   Google Scholar
• Li Y, Mai Y-W, Ye L. 2000. Sisal fibre and its composites: a review of recent developments. Compos Sci Technol. 60:2037–2055. doi:10.1016/S0266-3538(00)00101-9.
   Web of Science ®Google Scholar
• Lu Y, Liu X, Lü K, Li Y, Liu F, Liu P. 2021. Properties and fracture surface features of plaster mold reinforced with short polypropylene fibers for investment casting. Int J Met. 15:700–709.
   Google Scholar
• Luz SM, Caldeira-Pires A, Ferrão PM. 2010. Environmental benefits of substituting talc by sugarcane bagasse fibers as reinforcement in polypropylene composites: ecodesign and LCA as strategy for automotive components. Resour Conserv Recycl. 54:1135–1144. doi:10.1016/j.resconrec.2010.03.009.
   Web of Science ®Google Scholar
• Malviya RK, Singh RK, Purohit R, Sinha R. 2020. Natural fibre reinforced composite materials: environmentally better life cycle assessment – a case study. Mater Today Proc. 26:3157–3160. doi:10.1016/j.matpr.2020.02.651.
   Google Scholar
• Marimuthu KP, Kumar SM, Kumar VR, Govindaraju HK. 2019. Characterization of mechanical properties of epoxy reinforced with glass fiber and coconut fiber. Mater Today Proc. 16:661–667. doi:10.1016/j.matpr.2019.05.143.
   Google Scholar
• Marques B, Tadeu A, Antonio J, Almeida J, de Brito J. 2020. Mechanical, thermal and acoustic behaviour of polymer-based composite materials produced with rice husk and expanded cork by-products. Constr Build Mater. 239:117851. doi:10.1016/j.conbuildmat.2019.117851.
   Web of Science ®Google Scholar
• Masisi K, Masamba R, Lashani K, Li C, Kwape TE, Gaobotse G. 2021. Antioxidant, cytotoxicity and cytoprotective potential of extracts of grewia flava and grewia bicolor berries. J Pharmacopuncture. 24:24. doi:10.3831/KPI.2021.24.1.24.
   PubMed Web of Science ®Google Scholar
• May M, Rupakula GD, Matura P. 2020. Non-polymer-matrix composite materials for space applications. Compos Part C Open Access. 3:100057. doi:10.1016/j.jcomc.2020.100057.
   Google Scholar
• Mbarki K, Boumbimba RM, Sayari A, Elleuch B. 2019. Influence of microfibers length on PDLA/cellulose microfibers biocomposites crystallinity and properties. Polym Bull. 76:1061–1079. doi:10.1007/s00289-018-2431-x.
   Web of Science ®Google Scholar
• Mewoli AE, Segovia C, Ebanda FB, Ateba A, Noah PMA, Ndiwe B, Njom AE. 2020. Physical-Chemical and mechanical characterization of the bast fibers of triumfetta cordifolia A. Rich. from the equatorial region of Cameroon. J. Miner. Mater. Charact Eng. 8:163.
   Google Scholar
• M’ghari O, Hassani F-ZSA, Mekhzoum MEM, Zari N, Bouhfid R. 2021. Elaboration of a composite material based on plaster reinforced with phase change material/Oakum fiber: physical, thermal and mechanical properties. J Energ Stor. 35:102321. doi:10.1016/j.est.2021.102321.
   Web of Science ®Google Scholar
• Mohamed A-EH, Karrar MA, Salih M, Bashir AK, Ali MB, Khalid SA. 1990. Pharmacological activities of Grewia bicolor roots. J Ethnopharmacol. 28:285–292. doi:10.1016/0378-8741(90)90079-9.
   PubMed Web of Science ®Google Scholar
• Nadlene R, Sapuan S, Jawaid M, Ishak M, Yusriah L. 2015. Material characterization of roselle fibre (Hibiscus sabdariffa L.) as potential reinforcement material for polymer composites. Fibres Text East Eur. 23:23–30. doi:10.5604/12303666.1167413.
   Web of Science ®Google Scholar
• Nagavally RR. 2017. Composite materials-history, types, fabrication techniques, advantages, and applications. Int J Mech Prod Eng. 5:82–87.
   Google Scholar
• Nam S, Netravali AN. 2006. Green composites. I. Physical properties of ramie fibers for environment-friendly green composites. Fibers Polym. 7:372–379. doi:10.1007/BF02875769.
   Web of Science ®Google Scholar
• Nayak SY, Sultan MTH, Shenoy SB, Kini CR, Samant R, Shah AUM, Amuthakkannan P. 2022. Potential of natural fibers in composites for ballistic applications – a review. J Nat Fibres. 19:1648–1658. doi:10.1080/15440478.2020.1787919.
   Web of Science ®Google Scholar
• Ndiwe B, Pizzi A, Chapuis H, Konai N, Karga L, Girods P, Danwe R. 2022. Desorption behavior and thermogravimetric analysis of bio-hardeners. J Renew Mater. 10:2015–2027. doi:10.32604/jrm.2022.019891.
   Web of Science ®Google Scholar
• Ndiwe B, Pizzi A, Danwe R, Tibi B, Konai N, Amirou S. 2019. Particleboard bonded with bio-hardeners of tannin adhesives. Europ J Wood Wood Prod. 77:1221–1223. doi:10.1007/s00107-019-01460-5.
   Web of Science ®Google Scholar
• Ndiwe B, Tibi B, Danwe R, Konai N, Pizzi A, Amirou S. 2020. Reactivity, characterization and mechanical performance of particleboards bonded with tannin resins and bio hardeners from African trees. Inter Wood Prod J. 11:80–93. doi:10.1080/20426445.2020.1731070.
   Web of Science ®Google Scholar
• NF EN 312. 2010. Particleboards — Specifications.
   Google Scholar
• Ngom D, Diatta S, Akpo L. 2009. Estimation de la production fourragère de deux ligneux sahéliens (Pterocarpus lucens Lepr. Ex Guill. & Perrot et Grewia bicolor Juss) au Ferlo (Nord Sénégal). Livest Res Rural Dev. 21:11.
   Google Scholar
• Nunes AO. 2015. Composites renforcés à fibres de carbone: récupération des fibres par vapo-thermolyse, optimisation du procédé [PhD Thesis]. Ecole des Mines d’Albi-Carmaux.
   Google Scholar
• Nyakudya TT, Nosenga N, Chivandi E, Erlwanger KH, Gundidza M, Gundidza E, Magwa ML, Muredzi P. 2015. Grewia bicolor seed oil: putative pharmaceutical, cosmetic and industrial uses. S Afr J Bot. 97:154–158. doi:10.1016/j.sajb.2015.01.004.
   Web of Science ®Google Scholar
• Obame SV, Betené ADO, Naoh PM, Betené FE, Atangana A. 2022. Characterization of the Neuropeltis acuminatas liana fiber treated as composite reinforcement. Result Mater. 16:100327. doi:10.1016/j.rinma.2022.100327.
   Google Scholar
• Ouajai S, Shanks RA. 2005. Composition, structure and thermal degradation of hemp cellulose after chemical treatments. Polym Degrad Stab. 89:327–335. doi:10.1016/j.polymdegradstab.2005.01.016.
   Web of Science ®Google Scholar
• Parida C, Dash SK, Pradhan C. 2015. FTIR and Raman studies of cellulose fibers of Luffa cylindrica. Open J Compos Mater. 05:5–10. doi:10.4236/ojcm.2015.51002.
   Google Scholar
• Plackett D, Løgstrup Andersen T, Batsberg Pedersen W, Nielsen L. 2003. Biodegradable composites based on l-polylactide and jute fibres. Compos Sci Technol. 63:1287–1296. doi:10.1016/S0266-3538(03)00100-3.
   Web of Science ®Google Scholar
• Ramesh M, Rajeshkumar L, Balaji D, Bhuvaneswari V. 2021a. Green composite using agricultural waste reinforcement. In: Thomas S, Balakrishnan P, editors. Green composites. Materials horizons: from nature to nanomaterials. Singapore: Springer; p. 21–34. doi:10.1007/978-981-15-9643-8_2.
   Google Scholar
• Ramesh M, RajeshKumar L, Bhuvaneshwari V. 2021b. Bamboo fiber reinforced composites. In: Jawaid M, Mavinkere Rangappa S, Siengchin S, editors. Bamboo fiber composites. Composites science and technology. Singapore: Springer; p. 1–13. doi:10.1007/978-981-15-8489-3_1.
   Google Scholar
• Rohen LA, Neves AC, Mantovani DdP, Maurício FC, da Silva Vieira J, Pontes LdA, Margem FM, Monteiro S. 2017. Hemp fiber density using the pycnometry technique. In: Characterization of minerals, metals, and materials. Cham: Springer; p. 423–428. doi:10.1007/978-3-319-51382-9_46.
   Google Scholar
• Ronald Aseer J, Sankaranarayanasamy K, Jayabalan P, Natarajan R, Priya Dasan K. 2013. Morphological, physical, and thermal properties of chemically treated banana fiber. J Nat Fibres. 10:365–380. doi:10.1080/15440478.2013.824848.
   Web of Science ®Google Scholar
• Rubino F, Nisticò A, Tucci F, Carlone P. 2020. Marine application of fiber reinforced composites: a review. J Marin Sci Eng. 8:26. doi:10.3390/jmse8010026.
   Web of Science ®Google Scholar
• Sango T, Cheumani Yona AM, Duchatel L, Marin A, Kor Ndikontar M, Joly N, Lefebvre J-M. 2018. Step–wise multi–scale deconstruction of banana pseudo–stem (Musa acuminata) biomass and morpho–mechanical characterization of extracted long fibres for sustainable applications. Ind Crops Prod. 122:657–668. doi:10.1016/j.indcrop.2018.06.050.
   Web of Science ®Google Scholar
• Seignobos C, Tourneux H. 2002. Le Nord-Cameroun à travers ses mots: dictionnaire de termes anciens et modernes: province de l’extrême-nord, KARTHALA Editions.
   Google Scholar
• Serifou MA, Jolissaint OSP, Kouassi BR, Edjikémé E. 2020. Analyse physico-mécanique d’un composite paille de riz/ciment. Matériaux Techniques. 108:208. doi:10.1051/mattech/2020024.
   Google Scholar
• Shamoun M, Mohamed A, El-Hadiyah T. 2014. Anticonvulsant and anxiolytic properties of the roots of Grewia bicolor in rats. Sudan J Med Sci. 9:137–143.
   Google Scholar
• Sreekala MS, Kumaran MG, Thomas S. 2002. Water sorption in oil palm fiber reinforced phenol formaldehyde composites. Compos Part A: Appl Sci Manufact. 33:763–777. doi:10.1016/S1359-835X(02)00032-5.
   Web of Science ®Google Scholar
• Srinivasulu N, Tejaswi V. 2012. Mechanical properties of polymer composite materials. Int J Res in Eng Techn. 01:78–81. doi:10.15623/ijret.2012.0101010.
   Google Scholar
• Tanobe VOA, Sydenstricker THD, Munaro M, Amico SC. 2005. A comprehensive characterization of chemically treated Brazilian sponge-gourds (Luffa cylindrica). Polym Test. 24:474–482. doi:10.1016/j.polymertesting.2004.12.004.
   Web of Science ®Google Scholar
• Teixeira FP, Gomes O, da FM, de Andrade Silva F. 2019. Degradation mechanisms of curaua, hemp, and sisal fibers exposed to elevated temperatures. BioResources. 14:1494–1511. doi:10.15376/biores.14.1.1494-1511.
   Web of Science ®Google Scholar
• Thirumurugan R, Jayaraj M, Shanmugam D, Ramkumar T. 2021. Characterization of new natural cellulosic fiber from coconut tree primary flower leaf stalk fiber (CPFLSF). J Nat Fibres. 18:1844–1856. doi:10.1080/15440478.2019.1701608.
   Web of Science ®Google Scholar
• Tiwari YM, Sarangi SJ. 2022. Comprehensive characterization of New natural fiber extracted from the stem of Grewia flavescens plant. J Nat Fibres. doi:10.1080/15440478.2022.2068107.
   Google Scholar
• Todor M, Bulei C, Heput T, Kiss I. 2018. Researches on the development of new composite materials complete/partially biodegradable using natural textile fibers of new vegetable origin and those recovered from textile waste. IOP conference series: materials science and engineering. IOP Publishing, p. 012021.
   Google Scholar
• Tran LQN, Nguyen Minh T, Fuentes CA, Truong Chi T, Van Vuure AW, Verpoest I. 2015. Investigation of microstructure and tensile properties of porous natural coir fibre for use in composite materials. Ind Crops Prod. 65:437–445. doi:10.1016/j.indcrop.2014.10.064.
   Web of Science ®Google Scholar
• Ventura-Cruz S, Tecante A. 2019. Extraction and characterization of cellulose nanofibers from Rose stems (Rosa spp.). Carbohydr Polym. 220:53–59. doi:10.1016/j.carbpol.2019.05.053.
   PubMed Web of Science ®Google Scholar
• Zambrano MC, Pawlak JJ, Daystar J, Ankeny M, Venditti RA. 2021. Impact of dyes and finishes on the aquatic biodegradability of cotton textile fibers and microfibers released on laundering clothes: correlations between enzyme adsorption and activity and biodegradation rates. Mar Pollut Bull. 165:112030. doi:10.1016/j.marpolbul.2021.112030.
   PubMed Web of Science ®Google Scholar