Fatigue durability test of quasi-isotropic carbon/epoxy laminates in marine environment

References

• Mayya HB, Pai D, Kini VM, et al. Effect of marine environmental conditions on physical and mechanical properties of Fiber-Reinforced composites—a review. J Inst Eng India Ser C. 2021;102(3):843–849. doi: 10.1007/s40032-021-00676-w.
   Google Scholar
• Subhani M, Al-Ameri R. Strength reduction in square columns confined with CFRP under marine environment. Compos B Eng. 2016;97:183–192. doi: 10.1016/j.compositesb.2016.05.016.
   Web of Science ®Google Scholar
• Rao YS, Mohan NS, Shetty N, et al. Drilling and structural property study of multi-layered fiber and fabric reinforced polymer composite - a review. Mater Manuf Process. 2019;34(14):1549–1579. doi: 10.1080/10426914.2019.1686522.
   Web of Science ®Google Scholar
• Manjunatha CM, Srihari S. A brief review on the fatigue behavior of continuous fiber reinforced thermosetting epoxy polymer based nanocomposites. Trans Indian Natl Acad Eng. 2022;7(2):501–507. doi: 10.1007/s41403-022-00320-8.
   Google Scholar
• Kühn F, Rehra J, May D, et al. Dry fiber placement of carbon/steel fiber hybrid preforms for multifunctional composites. Adv Manuf Polym Compos Sci. 2019;5(1):37–49. doi: 10.1080/20550340.2019.1585027.
   Web of Science ®Google Scholar
• Achukwu EO, Owen MM, Shuib SB, et al. Effect of reprocessing on the service life properties of glass fiber-reinforced in-house polypropylene waste composites. Adv Manuf Polym Compos Sci. 2023;9(1):2023.
   Web of Science ®Google Scholar
• Rubino F, Nisticò A, Tucci F, et al. Marine application of fiber reinforced composites: a review. JMSE. 2020;8(1):26. doi: 10.3390/jmse8010026.
   Google Scholar
• Gargano A, Pingkarawat K, Blacklock M, et al. Comparative assessment of the explosive blast performance of carbon and glass fibre-polymer composites used in naval ship structures. Compos Struct. 2017;171:306–316. doi: 10.1016/j.compstruct.2017.03.041.
   Web of Science ®Google Scholar
• Guo R, Li C, Niu Y, et al. The fatigue performances of carbon fiber reinforced polymer composites - A review. J Mater Res Technol. 2022;21:4773–4789. doi: 10.1016/j.jmrt.2022.11.053.
   Google Scholar
• Vieira PR, Carvalho EML, Vieira JD, et al. Experimental fatigue behavior of pultruded glass fibre reinforced polymer composite materials. Compos B Eng. 2018;146:69–75. doi: 10.1016/j.compositesb.2018.03.040.
   Web of Science ®Google Scholar
• Maragoni L, Carraro PA, Quaresimin M. Influence of manufacturing-induced defects on the fatigue performances of autoclave moulded laminates. Adv Manuf Polym Compos Sci. 2021;7(2):36–47. doi: 10.1080/20550340.2021.1967650.
   Web of Science ®Google Scholar
• Černý I, Mayer RM. Evaluation of static and fatigue strength of long fiber GRP composite material considering moisture effects. Compos Struct. 2010;92(9):2035–2038. doi: 10.1016/j.compstruct.2009.11.024.
   Web of Science ®Google Scholar
• Ansari MTA, Singh KK, Azam MS. Fatigue damage analysis of fiber-reinforced polymer composites—a review. J Reinf Plast Compos. 2018;37(9):636–654. doi: 10.1177/0731684418754713.
   Web of Science ®Google Scholar
• R. D. Karbhari VM, Chin JW, Hunston D, et al. Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure. J Compos Constr. 2003;7(3):238–247. doi: 10.1061/(ASCE)1090-0268(2003)7:3(238).
   Web of Science ®Google Scholar
• Hota G, Barker W, Manalo A. Degradation mechanism of glass fiber/vinylester-based composite materials under accelerated and natural aging. Constr Build Mater. 2020;256:119462. doi: 10.1016/j.conbuildmat.2020.119462.
   Web of Science ®Google Scholar
• Wang J, GangaRao H, Liang R, et al. Durability and prediction models of fiber-reinforced polymer composites under various environmental conditions: a critical review. J Reinf Plast Compos. 2016;35(3):179–211. doi: 10.1177/0731684415610920.
   Web of Science ®Google Scholar
• Balcıoğlu HE, Sakin R, Gün H. Effects of hostile solutions on the static and dynamic behavior of carbon/epoxy composites. J Compos Mater. 2021;55(25):3671–3685. doi: 10.1177/00219983211020094.
   Web of Science ®Google Scholar
• Kootsookos A, Mouritz AP. Seawater durability of glass- and carbon-polymer composites. Compos Sci Technol. 2004;64(10–11):1503–1511. doi: 10.1016/j.compscitech.2003.10.019.
   Web of Science ®Google Scholar
• Idrisi AH, Mourad AI, Abdel-Magid BM, et al. Investigation on the durability of E-Glass/epoxy composite exposed to seawater at elevated temperature. Polymer. 2021;13(13):2182. doi: 10.3390/polym13132182.
   PubMedGoogle Scholar
• Vijaya Kini M, Pai D, Shreepannaga. The ageing effect on static and dynamic mechanical properties of fibre reinforced polymer composites under marine environment- A review. Mater Today Proc. 2022;52(3);689–696. doi: 10.1016/j.matpr.2021.10.084.
   Google Scholar
• Resch-Fauster K, Džalto J, Anusic A, et al. Effect of the water absorptive capacity of reinforcing fibers on the process ability, morphology, and performance characteristics of composites produced from polyfurfuryl alcohol. Adv Manuf Polym Compos Sci. 2018;4(1):13–23. doi: 10.1080/20550340.2018.1436234.
   Web of Science ®Google Scholar
• Wu P, Xu L, Luo J, et al. Influences of long-term immersion of water and alkaline solution on the fatigue performances of unidirectional pultruded CFRP plate. Constr Build Mater. 2019;205(2):344–356. doi: 10.1016/j.conbuildmat.2019.01.227.
   Google Scholar
• Gibhardt D, Doblies A, Meyer L, et al. Effects of hygrothermal ageing on the interphase, fatigue, and mechanical properties of glass fibre reinforced epoxy. Fibers. 2019;7(6):55. doi: 10.3390/fib7060055.
   Web of Science ®Google Scholar
• Behera A, Dupare P, Thawre MM, et al. Effects of hygrothermal aging and fiber orientations on constant amplitude fatigue properties of CFRP multidirectional composite laminates. Int J Fatigue. 2020;136:105590. doi: 10.1016/j.ijfatigue.2020.105590.
   Web of Science ®Google Scholar
• Koshima S, Yoneda S, Kajii N, et al. Evaluation of strength degradation behavior and fatigue life prediction of plain-woven carbon-fiber-reinforced plastic laminates immersed in seawater. Compos A Appl Sci Manuf. 2019;127:105645. doi: 10.1016/j.compositesa.2019.105645.
   Web of Science ®Google Scholar
• Habibi M, Laperrière L, Hassanabadi HM. Effect of moisture absorption and temperature on quasi-static and fatigue behavior of nonwoven flax epoxy composite. Compos B Eng. 2019;166:31–40. doi: 10.1016/j.compositesb.2018.11.131.
   Web of Science ®Google Scholar
• Wang X, Zhao X, Wu Z. Fatigue degradation and life prediction of basalt fiber-reinforced polymer composites after saltwater corrosion. Mater Des. 2019;163:107529. doi: 10.1016/j.matdes.2018.12.001.
   Web of Science ®Google Scholar
• Attukur Nandagopal R, Chai GB, Narasimalu S. Influence of stress ratio and stress concentration on the fatigue behaviour of hygrothermal aged multidirectional CFRP composite laminate. Int J Fatigue. 2020;137:105651. doi: 10.1016/j.ijfatigue.2020.105651.
   Web of Science ®Google Scholar
• Shan Y, Liao K. Environmental fatigue behavior and life prediction of unidirectional glass-carbon/epoxy hybrid composites. Int J Fatigue. 2001;24(2–4):847–859. doi: 10.1016/S0142-1123(01)00210-9.
   Google Scholar
• Padmaraj NH, Vijaya KM, Dayananda P. Experimental investigation on fatigue behaviour of glass/epoxy quasi-isotropic laminate composites under different ageing conditions. Int J Fatigue. 2021;143:105992. doi: 10.1016/j.ijfatigue.2020.105992.
   Web of Science ®Google Scholar
• Zhao X, Wang X, Wu Z, et al. Temperature effect on fatigue behavior of basalt fiber-reinforced polymer composites. Polym Compos. 2019;40(6):2273–2283. doi: 10.1002/pc.25035.
   Web of Science ®Google Scholar
• N H P, Pai K D, Shreepannaga S, et al. Fatigue behaviour and damage characterization of quasi-isotropic carbon/epoxy laminates. Cogent Eng. 2022;9(1):2077680. doi: 10.1080/23311916.2022.2077680.
   Web of Science ®Google Scholar
• Padmaraj NH, Vijaya KM, Amritha U, et al. Slurry erosion behaviour of carbon/epoxy quasi-isotropic laminates based on Taguchi’s optimization method. Eng Fail Anal. 2021;123:105274. doi: 10.1016/j.engfailanal.2021.105274.
   Web of Science ®Google Scholar
• ASTM D1141-98(2013). Standard practice for the preparation of substitute ocean water. West Conshohocken (PA): ASTM International; 2008. p. 98–100.
   Google Scholar
• Aithal S, Hossagadde PN, Kini MV, et al. Durability study of quasi-isotropic carbon/epoxy composites under various environmental conditions. Iran Polym J. 2023;32(7):873–885. doi: 10.1007/s13726-023-01172-x.
   Web of Science ®Google Scholar
• ASTM. D3039/D3039M standard test method for tensile properties of polymer matrix composite materials. Annu B ASTM Stand. 2014;15:1–13.
   Google Scholar
• ASTM D3479/D3479M. Standard test method for tension-tension fatigue of polymer matrix composite materials. Annu B ASTM Stand. 2012;96:6.
   Google Scholar
• Giancane S, Panella FW, Dattoma V. Characterization of fatigue damage in long fiber epoxy composite laminates. Int J Fatigue. 2010;32(1):46–53. doi: 10.1016/j.ijfatigue.2009.02.024.
   Web of Science ®Google Scholar
• De Finis R, Palumbo D, Galietti U. An experimental procedure based on infrared thermography for the assessment of crack density in quasi-isotropic CFRP. Eng Fract Mech. 2021;258:108108. doi: 10.1016/j.engfracmech.2021.108108.
   Web of Science ®Google Scholar
• Padmaraj NH, Vijaya KM, Dayananda P. Experimental study on the tension-tension fatigue behaviour of glass/epoxy quasi-isotropic composites. J King Saud Univ Eng Sci. 2020;32(6):396–401. doi: 10.1016/j.jksues.2019.04.007.
   Google Scholar
• Wu F, Yao W. A fatigue damage model of composite materials. Int J Fatigue. 2010;32(1):134–138. doi: 10.1016/j.ijfatigue.2009.02.027.
   Web of Science ®Google Scholar
• Niu YF, Yan Y, Yao JW. Hygrothermal aging mechanism of carbon fiber/epoxy resin composites based on quantitative characterization of interface structure. Polym Test. 2021;94:107019. doi: 10.1016/j.polymertesting.2020.107019.
   Web of Science ®Google Scholar
• Ghabezi P, Harrison NM. Indentation characterization of glass/epoxy and carbon/epoxy composite samples aged in artificial salt water at elevated temperature. Polym Test. 2022;110:107588. doi: 10.1016/j.polymertesting.2022.107588.
   Web of Science ®Google Scholar
• Wang Z, Zhao XL, Xian G, et al. Long-term durability of basalt- and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment. Constr Build Mater. 2017;139:467–489. doi: 10.1016/j.conbuildmat.2017.02.038.
   Web of Science ®Google Scholar
• Ghabezi P, Harrison NM. Hygrothermal deterioration in carbon/epoxy and glass/epoxy composite laminates aged in marine-based environment (degradation mechanism, mechanical and physicochemical properties). J Mater Sci. 2022;57(6):4239–4254. doi: 10.1007/s10853-022-06917-2.
   Web of Science ®Google Scholar
• Vassilopoulos AP. The history of fiber-reinforced polymer composite laminate fatigue. Int J Fatigue. 2020;134:105512. doi: 10.1016/j.ijfatigue.2020.105512.
   Web of Science ®Google Scholar
• Ansari MTA, Singh KK, Azam MS. Observations of fatigue damage development in woven glass fiber-reinforced polymer composite using transmission light photography technique. Polym Polym Compos. 2022;30:096739112211013. doi: 10.1177/09673911221101300.
   Web of Science ®Google Scholar
• Ugochukwu S, Ridzuan MJM, Abdul Majid MS, et al. Effect of thermal ageing on the scratch resistance of natural-fibre-reinforced epoxy composites. Compos Struct. 2021;261:113586. doi: 10.1016/j.compstruct.2021.113586.
   Web of Science ®Google Scholar
• Alam P, Mamalis D, Robert C, et al. The fatigue of carbon fibre reinforced plastics - A review. Compos B Eng. 2019;166:555–579. doi: 10.1016/j.compositesb.2019.02.016.
   Web of Science ®Google Scholar
• Ziemian CW, Ziemian RD, Haile KV. Characterization of stiffness degradation caused by fatigue damage of additive manufactured parts. Mater Des. 2016;109:209–218. doi: 10.1016/j.matdes.2016.07.080.
   Web of Science ®Google Scholar