Surfactants-styrene butadiene latex synergistic enhancement of bamboo scraps/magnesium oxychloride light composite interface compatibility

References

• Rao AU, Bh R, Maddodi B, et al. Performance evaluation of hybrid glass wastes incorporated concrete. Eng Sci. 2022;20:188–198.
   Google Scholar
• Baghban MH, Tosee SVR, Valerievich KA, et al. Mechanical properties of self-compacting lightweight concrete containing organic waste ash. Eng Sci. 2022;20:275–283.
   Google Scholar
• Maddodi B, Bh RP, Sharma V, et al. Experimental and statistical evaluation of mechanical properties of green cement concretes–Taguchi integrated supervised learning approach. Eng Sci. 2022;18:148–158. doi: 10.30919/es8e689.
   Google Scholar
• Ahmad M, Al-Dala RNS, Beddu S, et al. Thermo-physical properties of graphite powder and polyethylene modified asphalt concrete. Eng Sci. 2021;17:121–132. doi: 10.30919/es8d569.
   Google Scholar
• Mustaffa NK, Mat I, Che CM. Top-down bottom-up strategic green building development framework: case studies in Malaysia. Build Environ. 2021;203:108052. doi: 10.1016/j.buildenv.2021.108052.
   Web of Science ®Google Scholar
• Zhu W, Huang B, Zhao J, et al. Impacts on the embodied carbon emissions in China’s building sector and its related energy-intensive industries from energy-saving technologies perspective: a dynamic CGE analysis. Energ Buildings. 2023;287:112926. doi: 10.1016/j.enbuild.2023.112926.
   Web of Science ®Google Scholar
• Guan X, Guo S, Xiong J, et al. Energy-related CO2 emissions of urban and rural residential buildings in China: a provincial analysis based on end-use activities. J Build Eng. 2023;64:105686. doi: 10.1016/j.jobe.2022.105686.
   Web of Science ®Google Scholar
• de Macedo Neto JC, do Nascimento NR, Bello RH, et al. Kaolinite review: intercalation and production of polymer nanocomposites. Eng Sci. 2021;17:28–44.
   Google Scholar
• Naik N, Shivamurthy B, Thimmappa BHS, et al. A review on processing methods and characterization techniques of green composites. Eng Sci. 2022;20:80–99. doi: 10.30919/es8d713.
   Google Scholar
• Hao Y, Li Y. Study on preparation and properties of modified magnesium oxychloride cement foam concrete. Constr Build Mater. 2021;282:122708. doi: 10.1016/j.conbuildmat.2021.122708.
   Web of Science ®Google Scholar
• Kunhanandan N EK, Ramamurthy K. Fresh state characteristics of foam concrerte. J Mater Civil Eng. 2008;20(2):111–117. doi: 10.1061/(ASCE)0899-1561(2008)20:2(111).
   Web of Science ®Google Scholar
• Wang FZ, Yang L, Guan LY, et al. Microstructure and properties of cement foams prepared by magnesium oxychloride cement. J Wuhan Univ Technol. 2015;30(2):331–337. doi: 10.1007/s11595-015-1149-y.
   Google Scholar
• Stephen C, Shivamurthy B, Mohan M, et al. Low velocity impact behavior of fabric reinforced polymer composites–a review. Eng Sci. 2022;18:75–97. doi: 10.30919/es8d670.
   Google Scholar
• Li K, Wang Y, Zhang X, et al. Intrinsically hydrophobic magnesium oxychloride cement foam for thermal insulation material. Constr Build Mater. 2021;288:123129. doi: 10.1016/j.conbuildmat.2021.123129.
   Web of Science ®Google Scholar
• Chau CK, Chan J, Li ZJ. Influences of fly ash on magnesium oxychloride mortar. Cement Concrete Comp. 2009;31(4):250–254. doi: 10.1016/j.cemconcomp.2009.02.011.
   Web of Science ®Google Scholar
• Naik V, Kumar M, Kaup V. A review on natural fiber composite material in automotive applications. Eng Sci. 2021;18:1–10. doi: 10.30919/es8d589.
   Google Scholar
• Lv P, Liu C, Rao Z. Review on clay mineral-based form-stable phase change materials: preparation, characterization and applications [J]. Renew Sust Energ Rev. 2017;68:707–726. doi: 10.1016/j.rser.2016.10.014.
   Web of Science ®Google Scholar
• Das SK, Behera N, Patro SK, et al. Effectiveness of rice husk ash-derived alkali activator in fresh, mechanical, and microstructure properties of geopolymer mortar at ambient temperature curing[J/OL]. J Sustain Cem-Based. 2023:1–9. doi: 10.1080/21650373.2023.2262465.
   Web of Science ®Google Scholar
• Zhang Y, Liu Q, Zhang S, et al. Characterization of kaolinite/styrene butadiene rubber composite: mechanical propertiesand thermal stability. Appl Clay Sci. 2016;124–125:167–174. doi: 10.1016/j.clay.2016.02.002.
   Web of Science ®Google Scholar
• El-Sabbagh SH, Ahmed NM, Ward AA. Effect of kaolin–metal oxides core–shell pigments on the properties of styrene–butadiene rubber composites. Mater Design. 2012;40:343–355. doi: 10.1016/j.matdes.2012.04.004.
   Web of Science ®Google Scholar
• Ali U, Shahid S, Ali S. Combined effects of styrene–butadiene rubber (SBR) latex and recycled aggregates on compressive strength of concrete. J Rubber Res. 2021;24(1):107–120. doi: 10.1007/s42464-020-00077-1.
   Web of Science ®Google Scholar
• Jitsangiam P, Nusit K, Phenrat T, et al. An examination of natural rubber modified asphalt: effects of rubber latex contents based on macro and micro-observation analyses. Constr Build Mater. 2021;289:123158. doi: 10.1016/j.conbuildmat.2021.123158.
   Web of Science ®Google Scholar
• Udomchai A, Buritatum A, Suddeepong A, et al. Evaluation of durability against wetting and drying cycles of cement-natural rubber latex stabilised unpaved road under cyclic tensile loading. Int J Pavement Eng. 2022;23(12):4442–4453. doi: 10.1080/10298436.2021.1950719.
   Google Scholar
• Jin Y, Liu J, Yang H, et al. Improving enzymatic saccharification and ethanol production of bamboo residues with sulfomethylation-aided phosphoric acid pretreatment. Ind Crop Prod. 2021;170:113733. doi: 10.1016/j.indcrop.2021.113733.
   Web of Science ®Google Scholar
• Lin W, Yang J, Zheng Y, et al. Understanding the effects of different residual lignin fractions in acid-pretreated bamboo residues on its enzymatic digestibility. Biotechnol Biofuels. 2021;14(1):143.
   PubMed Web of Science ®Google Scholar
• Kundu SP, Chakraborty S, Roy A, et al. Chemically modified jute fibre reinforced non-pressure (NP) concrete pipes with improved mechanical properties. Constr Build Mater. 2012;37:841–850. doi: 10.1016/j.conbuildmat.2012.07.082.
   Web of Science ®Google Scholar
• Ba HJ, Guan H. Influence of MgO/MgCl2 molar ratio on phase stability of magnesium oxychloride cement[J]. J Wuhan Univ Technol. 2009;24(3):476–481. doi: 10.1007/s11595-009-3476-3.
   Google Scholar
• Akid AS, Wasiew QA, Sobuz MH, et al. Flexural behavior of corroded reinforced concrete beam strengthened with jute fiber reinforced polymer. Adv Struct Eng. 2021;24(7):1269–1282. doi: 10.1177/1369433220974783.
   Web of Science ®Google Scholar
• Ling YTQ, Heng YX, Chan HH, et al. Evaluation of biocompatible palm-based polymeric surfactants for potential natural rubber latex stabilisation applications. J Rubber Res. 2021;24(3):369–380. doi: 10.1007/s42464-021-00104-9.
   Web of Science ®Google Scholar
• Li Y, Zhang YF, Zhan LW, et al. The effects of SDS, APG, and DTAB surfactants on the morphology of micro-nano RDX particles prepared in a microfluidic reactor. Tenside Surfact Det. 2023;60(3):245–252. doi: 10.1515/tsd-2022-2482.
   Web of Science ®Google Scholar
• Mai X, Mai J, Liu H, et al. Advanced bamboo composite materials with high-efficiency and long-term anti-microbial fouling performance. Adv Compos Hybrid Ma. 2022; 5(2):864–871. doi: 10.1007/s42114-021-00380-4
   Google Scholar
• Zhu EQ, Xu GF, Ye XY, et al. Preparation and characterization of hydrothermally pretreated bamboo powder with improved thermoplasticity by propargyl bromide modification in a heterogeneous system. Adv Compos Hybrid Ma. 2021;4(4):1059–1069. doi: 10.1007/s42114-021-00316-y.
   Google Scholar
• Xu YZ, Qin BT, Shi QL, et al. Study on the adsorption of cement particles on surfactant and its effect on the characteristics of inorganic curing foam for prevention of coal spontaneous combustion in a goaf. Fuel. 2023;333:126407. doi: 10.1016/j.fuel.2022.126407.
   Web of Science ®Google Scholar
• Huang JK, Young WB. The mechanical, hygral, and interfacial strength of continuous bamboo fiber reinforced epoxy composites. Compos Part B-Eng. 2019;166:272–283. doi: 10.1016/j.compositesb.2018.12.013.
   Web of Science ®Google Scholar
• Agarwal A, Nanda B, Maity D. Experimental investigation on chemically treated bamboo reinforced concrete beams and columns. Constr Build Mater. 2014;71:610–617. doi: 10.1016/j.conbuildmat.2014.09.011.
   Web of Science ®Google Scholar
• Bian F, Zhong Z, Li C, et al. Intercropping improves heavy metal phytoremediation efficiency through changing properties of rhizosphere soil in bamboo plantation. J Hazard Mater. 2021;416:125898. doi: 10.1016/j.jhazmat.2021.125898.
   PubMed Web of Science ®Google Scholar
• Kim HK, Jeon JH, Lee HK. Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air. Constr Build Mater. 2012;29:193–200. doi: 10.1016/j.conbuildmat.2011.08.067.
   Web of Science ®Google Scholar
• Zhang X, Ge SJ, Wang HN, et al. Effect of 5-phase seed crystal on the mechanical properties and microstructure of magnesium oxychloride cement. Constr Build Mater. 2017;150(5):409–417. doi: 10.1016/j.conbuildmat.2017.05.211.
   Google Scholar
• Li J, Li G, Yu Y. The influence of compound additive on magnesium oxycloride cement/urban refuse floor tile. Constr Build Mater. 2008;22(4):521–525. doi: 10.1016/j.conbuildmat.2006.11.010.
   Web of Science ®Google Scholar
• Wang N, Yu H, Bi W, et al. Effects of sodium citrate and citric acid on the properties of magnesium oxycloride cement. Constr Build Mater. 2018;169:697–704. doi: 10.1016/j.conbuildmat.2018.02.208.
   Web of Science ®Google Scholar
• Zheng L, Zuo Y, Li X, et al. Laminated stone-inspired multi-layer crystal structure reinforced bamboo scrap/magnesium oxychloride lightweight composites. J Sustain Cem-Based. 2023;12(10):1218–1227. doi: 10.1080/21650373.2023.2210316.
   Google Scholar
• Ma ZH, Han Y, Wang QY, et al. Construction of binary metal sulphides via lignosulfonate as sulphur source for efficient oxygen evolution reaction. Int J Hydrogen Energ. 2023;48(26):9636–9646. doi: 10.1016/j.ijhydene.2022.12.007.
   Web of Science ®Google Scholar
• Mkrtchyan ES, Burakova IV, Burakov AE, et al. Synthesis of a nanocomposite material based on graphene oxide modified with lignosulfonate. Tech Phys. 2022;67(9):644–650. doi: 10.1134/S1063784222090031.
   Web of Science ®Google Scholar
• Dai ST, Gao LX, Yan F, et al. Synergistic of anionic and nonionic monomers for high solid content bio-based waterborne polyurethane sizing agents. Compos Commun. 2023;38:101498. doi: 10.1016/j.coco.2023.101498.
   Web of Science ®Google Scholar
• Li MH, Zhou XZ, Zhao JM, et al. Preliminary exploration of a novel high-performance air entraining agent based on sodium dodecyl sulfate added self-made fluorocarbon surfactant. Constr Build Mater. 2023;370:130564. doi: 10.1016/j.conbuildmat.2023.130564.
   Web of Science ®Google Scholar
• Ramirez JC, HernáNdez‐Belmares PJ, Herrera‐Ordonez J. On the association between poly(vinyl alcohol) and sodium dodecyl sulfate and its effect on liquid–liquid interfacial tension: a mathematical model. J Surfactants Deterg. 2022;25(4):455–465. doi: 10.1002/jsde.12584.
   Web of Science ®Google Scholar
• Derakhshani A, Ghadi A, Vahdat SE. Study of the effect of calcium nitrate, calcium formate, triethanolamine, and triisopropanolamine on compressive strength of Portland-pozzolana cement. Case Stud Constr Mat. 2023;18:e01799. doi: 10.1016/j.cscm.2022.e01799.
   Google Scholar
• Ren ZH, Huang J, Luo Y, et al. Micellization behavior of binary mixtures of amino sulfonate amphoteric surfactant with different octylphenol polyoxyethylene ethers in aqueous salt solution: both cationic and hydrophilic effects. J Ind Eng Chem. 2016;36:263–270. doi: 10.1016/j.jiec.2016.02.009.
   Web of Science ®Google Scholar