References
- IPCC Fifth Assessment Report. Synthesis report. Geneva (CH): Intergovernmental Panel on Climate Change (CH); 2014.
- Reed R. The superalloys: fundamentals and applications. Cambridge (UK): Cambridge University Press; 2006.
- Clarke DR, Oechsner M, Padture NP. Thermal-barrier coatings for more efficient gas-turbine engines. MRS Bull. 2012;37(10):891–898. doi: 10.1557/mrs.2012.232
- Uemura S, Yamamuro T, Kim JW, Morizono Y, Tsurekawa S, Yoshimi K. Quantitative evaluation of microstructure in Mo-Si-B-TiC alloy produced by melting and tilt casting methods. Mater Trans. 2018;59(1):136–145. doi: 10.2320/matertrans.M2017194
- Matsumura Y, Fukumoto M, Hayashi S, et al. Oxidation behavior of a Re-Base diffusion-barrier/-NiAl coating on Nb–5Mo–15W at high temperatures. Met. 2004;61(1/2):105–124. doi: 10.1023/B:OXID.0000016279.88052.d9
- Bao ZB, Murakami H, Mitarai Y. Microstructure and oxidation behaviour of Ir-rich Ir–Al binary alloys. Corros Sci. 2014;87:306–311. doi: 10.1016/j.corsci.2014.06.038
- Skowron A, Lee DS, De León RR, et al. Greater fuel efficiency is potentially preferable to reducing NOx emissions for aviation’s climate impacts. Nat Commun. 2021;12(1):564. doi: 10.1038/s41467-020-20771-3
- Hodnebrog Ø, Berntsen TK, Dessens O, et al. Future impact of traffic emissions on atmospheric ozone and OH based on two scenarios. Atmos Chem Phys. 2012;12(24):12211–12225. doi: 10.5194/acp-12-12211-2012
- Nakamura T, Oka T, Imanari K, et al. Development of CMC turbine parts for Aero engines. IHI Eng Rev. 2014;47(l):29–32.
- Nakao W, Hayakawa T, Yanaseko T, et al. Advanced fiber reinforced self-healing ceramics for middle range temperature. Key Eng Mater. 2019;810:119–124. doi: 10.4028/www.scientific.net/KEM.810.119
- Chou IA, Chan HM, Harmer MP. Effect of annealing environment on the crack healing and mechanical behavior of silicon carbide-reinforced alumina nanocomposites. J Am Ceram Soc. 1998;81(5):1203–1208. doi: 10.1111/j.1151-2916.1998.tb02469.x
- Osada T, Nakao W, Takahashi K, et al. Strength recovery behavior of machined Al2O3/SiC nanocomposite ceramics by crack-healing. J Euro Ceram Soc. 2007;27(10):3261–3267. doi: 10.1016/j.jeurceramsoc.2006.11.080
- Nguyen ST, Takahashi T, Okawa A, et al. Improving self-healing ability and flexural strength of ytterbium silicate-based nanocomposites with silicon carbide nanoparticulates and whiskers. J Ceram Soc Jpn. 2021;129(4):209–216. doi: 10.2109/jcersj2.20179
- Webster RI, Opila EJ. Mixed phase ytterbium silicate environmental-barrier coating materials for improved calcium–magnesium–alumino-silicate resistance. J Mater Res. 2020;35(17):2358–2372. doi: 10.1557/jmr.2020.151
- Wu YN, Yamaguchi A, Murakami H, et al. Role of Iridium in hot corrosion resistance of Pt-Ir modified aluminide coatings with Na2SO4-NaCl salt at 1173 K. Mater Trans. 2006;47(8):1918–1921. doi: 10.2320/matertrans.47.1918
- Hagan JM, Opila EJ. High-temperature Na2SO4 deposit-assisted corrosion of silicon carbide – I: temperature and time dependence. J Am Ceram Soc. 2015;98(94):1275–1284. doi: 10.1111/jace.13409
- Herweyer LA, Opila EJ. Na2SO4 deposit-induced hot corrosion of SiC fibers relevant for SiC CMCs. J Am Ceram Soc. 2021;104(11):5908–5922. doi: 10.1111/jace.17982
- Santoso I, Taskinen P. Phase equilibria of the Na2O–SiO2 system between 1173 and 1873 K. Can Metal Q. 2016;55(2):243–250. doi: 10.1080/00084433.2016.1171427
- Maruoka D, Nanko M. Recovery of mechanical strength by surface crack disappearance via thermal oxidation for nano-Ni/Al2O3 hybrid materials. Ceram Intl. 2013;39(3):3221–3229. doi: 10.1016/j.ceramint.2012.10.008
- Maruoka D, Nanko M, Butt D. Improved crack healing and high-temperature oxidation resistance of Ni/Al2O3 by Y or Si doping. J Am Ceram Soc. 2016;99(7):2451–2457. doi: 10.1111/jace.14252
- Lambotte G, Chartrand P. Thermodynamic modeling of the (Al2O3+Na2O), (Al2O3+Na2O+SiO2), and (Al2O3+Na2O+AlF3+NaF) systems. J Chem Thermodyn. 2013;57:306–334. doi: 10.1016/j.jct.2012.09.002
- Maruoka D, Sato Y, Nanko M. Crack-healing effectiveness of nano Ni + SiC Co-dispersed alumina hybrid materials. Adv Mat Res. 2010;89-91:365–370. doi: 10.4028/www.scientific.net/AMR.89-91.365
- Hirota K, Komatsu W. Concurrent measurement of volume, grain-boundary, and surface diffusion coefficients in the system NiO-Al2O3. J Am Ceram Soc. 1977;60(3–4):105–107. doi: 10.1111/j.1151-2916.1977.tb15481.x
- Osada T, Kamoda K, Mitome M, et al. A novel design approach for self-crack-healing Structural ceramics with 3D networks of healing activator. Sci Rep. 2017;7(1):17853. doi: 10.1038/s41598-017-17942-6