An electromagnetic coupling treatment for improving the cutting performance of cemented carbide-coated tools

References

• Martinez I, Tanaka R, Yamane Y, et al. Wear mechanism of coated tools in the turning of ductile cast iron having wide range of tensile strength. Precis eng. 2017;47:46. doi: 10.1016/j.precisioneng.2016.07.003
   Web of Science ®Google Scholar
• Martinez I, Tanaka R, Yamane Y, et al. Wear Characteristics of coated carbide tools in the face milling of ductile cast iron. Key Eng Mater. 2017;749:178. doi: 10.4028/www.scientific.net/KEM.749.178
   Google Scholar
• Katuku K. Regime features of austempered ductile iron cutting. J Manuf Process. 2022;83:374. doi: 10.1016/j.jmapro.2022.09.004.
   Web of Science ®Google Scholar
• Yallese MA, Chaoui K, Zeghib N, et al. Hard machining of hardened bearing steel using cubic boron nitride tool. J Mater Process Tech. 2009;209(2):1092. doi: 10.1016/j.jmatprotec.2008.03.014
   Web of Science ®Google Scholar
• Wu H, Liu W, Xu Y, et al. Vat photopolymerization-based 3D printing of complex-shaped and high-performance Al2O3 ceramic tool with chip-breaking grooves: cutting performance and wear mechanism. J Asian Ceram Soc. 2023;11(1):159. doi: 10.1080/21870764.2023.2168343
   Web of Science ®Google Scholar
• Grzesik W, Rech J, Żak K, et al. Machining performance of pearlitic–ferritic nodular cast iron with coated carbide and silicon nitride ceramic tools. Int J Mach Tools Manuf. 2009;49(2):125. doi: 10.1016/j.ijmachtools.2008.10.003
   Web of Science ®Google Scholar
• Yigit R, Celik E, Findik F, et al. Tool life performance of multilayer hard coatings produced by HTCVD for machining of nodular cast iron. Int J Refract Metals Hard Mater. 2008;26(6):514. doi: 10.1016/j.ijrmhm.2007.12.003
   Web of Science ®Google Scholar
• Okada M, Hosokawa A, Tanaka R, et al. Cutting performance of PVD-coated carbide and CBN tools in hardmilling. Int J Mach Tools Manuf. 2011;51(2):127. doi: 10.1016/j.ijmachtools.2010.10.007
   Web of Science ®Google Scholar
• Camuşcu N. Effect of cutting speed on the performance of Al2O3 based ceramic tools in turning nodular cast iron. Mater Design. 2006;27(10):997. doi: 10.1016/j.matdes.2005.02.011
   Web of Science ®Google Scholar
• Eraslan D, Balcı A, Çetin B, et al. Machinability evaluations of austempered ductile iron and cast steel with similar mechanical properties under eco-friendly milling conditions. J Mater Res Technol. 2021;11:1443. doi: 10.1016/j.jmrt.2021.01.123
   Google Scholar
• Yuan M, Wang J, Wang M, et al. Enhanced carbide tool life by the electromagnetic coupling field for sustainable manufacturing. Int J Adv Manuf Technol. 2020;108(11–12):3905. doi: 10.1007/s00170-020-05612-3
   Web of Science ®Google Scholar
• Wang L, Yuan M, Li Y, et al. Cutting mechanism of WC-8Co cemented carbide for dry turning of Ti6Al4V before and after pulsed electromagnetic coupling processing. Rare Metal MaterEng. 2020;49:4016.
   Web of Science ®Google Scholar
• Wang Z, Huang Y, Guo W, et al. Effects of pulsed magnetic field on the flight and impact of supersonic plasma spraying particles and the properties of coatings. Mater Design. 2022;223:111127. doi: 10.1016/j.matdes.2022.111127
   Web of Science ®Google Scholar
• Yang Y, Qin Y, Yang Y, et al. Enhancing the wear resistance of a cemented carbide/titanium alloy under magnetofluid lubrication via the magnetic response. Wear. 2022;500-501:204370. doi: 10.1016/j.wear.2022.204370
   Web of Science ®Google Scholar
• Yang Y, Yang Y, Li Q, et al. An eco-friendly pulsed magnetic field treatment on cemented carbide (WC-12Co) for enhanced milling performance. J Clean Prod. 2022;340:130748. doi: 10.1016/j.jclepro.2022.130748.
   Web of Science ®Google Scholar
• Li Q, Yang Y, Yang Y, et al. Enhancing the wear performance of WC-6Co tool by pulsed magnetic field in Ti-6Al-4V machining. J Manuf Process. 2022;80:898. doi: 10.1016/j.jmapro.2022.06.054
   Web of Science ®Google Scholar
• Qu H, Zhang L, Chen Z, et al. Pulsed magnetic field treatment of TiAlSiN-coated milling tools for improved cutting performances. Int J Adv Manuf Technol. 2022;120(9–10):6723. doi: 10.1007/s00170-022-09145-9
   Web of Science ®Google Scholar
• Fei H, Wu H, Yang X, et al. Pulsed magnetic field treatment of cBN tools for improved cutting performances. J Manuf Process. 2021;69:21. doi: 10.1016/j.jmapro.2021.07.036
   Web of Science ®Google Scholar
• Shi L, Zou J, Sun L, et al. Effect of electropulsing treatment on microstructure and mechanical properties of cu-20Ni-20Mn alloy. Mater Sci Eng A. 2022;855:143847. doi: 10.1016/j.msea.2022.143847.
   Web of Science ®Google Scholar
• Lu Z, Guo C, Li P, et al. Effect of electropulsing treatment on microstructure and mechanical properties of intermetallic Al3Ti alloy. J Alloy Compd. 2017;708:834. doi: 10.1016/j.jallcom.2017.03.085
   Web of Science ®Google Scholar
• Zhang Q, Huang K, Wang J, et al. Effect of pulse electromagnetic coupling treatment on thermal conductivity of WC-8Co cemented carbide. Ceram Int. 2021;47(16):22683. doi: 10.1016/j.ceramint.2021.04.283
   Web of Science ®Google Scholar
• Yuan M, Wang J, Wang L, et al. Electromagnetic coupling field strengthening of WC-TiC-Co cermet tools. Ceram Int. 2021;47(3):3747. doi: 10.1016/j.ceramint.2020.09.232
   Web of Science ®Google Scholar
• Meng Y, Deng J, Wu J, et al. Improved interfacial adhesion of AlTiN coating by micro-grooves using ultrasonic surface rolling processing. J Mater Process Tech. 2022;304:117570. doi: 10.1016/j.jmatprotec.2022.117570
   Web of Science ®Google Scholar
• Cui Z, Ni J, He L, et al. Investigation of chip formation, cutting force and surface roughness during orthogonal cutting of polytetrafluoroethylene. J Manuf Process. 2022;77:485. doi: 10.1016/j.jmapro.2022.03.031
   Web of Science ®Google Scholar
• Zhao J, Liu Z. Influences of coating thickness on cutting temperature for dry hard turning inconel 718 with PVD TiAlN coated carbide tools in initial tool wear stage. J Manuf Process. 2020;56:1155. doi: 10.1016/j.jmapro.2020.06.010.
   Web of Science ®Google Scholar
• Chang K, Dong Y, Zheng G, et al. Friction and wear properties of TiAlN coated tools with different levels of surface integrity. Ceram Int. 2022;48(4):4433. doi: 10.1016/j.ceramint.2021.10.105
   Web of Science ®Google Scholar
• You Q, Xiong J, Li H, et al. Study on the microstructure and high temperature friction and wear characteristics of three CVD coated cermets. Int J Refract Metals Hard Mater. 2021;96:105495. doi: 10.1016/j.ijrmhm.2021.105495
   Web of Science ®Google Scholar
• Skordaris G, Bouzakis KD, Kotsanis T, et al. Effect of PVD film’s residual stresses on their mechanical properties, brittleness, adhesion and cutting performance of coated tools. CIRP J Manuf Sci Technol. 2017;18:145. doi: 10.1016/j.cirpj.2016.11.003
   Web of Science ®Google Scholar
• Breidenstein B, Denkena B. Significance of residual stress in PVD-coated carbide cutting tools. CIRP Ann. 2013;62(1):67. doi: 10.1016/j.cirp.2013.03.101
   Web of Science ®Google Scholar
• Leyland A, Matthews A. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour. Wear. 2000;246(1–2):1. doi: 10.1016/S0043-1648(00)00488-9
   Web of Science ®Google Scholar
• Qu J, Riester L, Shih AJ, et al. Nanoindentation characterization of surface layers of electrical discharge machined WC–Co. Materials Science & Engineering A, Structural Materials: Properties, Microstructure And Processing. 2003;344(1–2):125. doi: 10.1016/S0921-5093(02)00395-7
   Web of Science ®Google Scholar
• Beake BD. The influence of the H/E ratio on wear resistance of coating systems – insights from small-scale testing. Surf Coat Technol. 2022;442:128272. doi: 10.1016/j.surfcoat.2022.128272.
   Web of Science ®Google Scholar
• You Q, Xiong J, Li H, et al. Structure and mechanical behavior evaluation of CVD multilayer coatings deposited on Ti(C,N)-based cermets. Ceram Int. 2022;48(9):13250. doi: 10.1016/j.ceramint.2022.01.203
   Web of Science ®Google Scholar
• Doğan F, Uysal M, Duru E, et al. Pulsed electrodeposition of ni-B/TiN composites: effect of current density on the structure, mechanical, tribological, and corrosion properties. J Asian Ceram Soc. 2020;8(4):1271. doi: 10.1080/21870764.2020.1840704
   Web of Science ®Google Scholar
• Bobzin K, Brögelmann T, Maier HJ, et al. Influence of residual stresses in hard tool coatings on the cutting performance. J Manuf Process. 2021;69:340. doi: 10.1016/j.jmapro.2021.08.011
   Web of Science ®Google Scholar
• Chellappa M, Vijayalakshmi U. Improved corrosion resistant and mechanical behavior of distinct composite coatings (silica/titania/zirconia) on Ti–6Al–4V deposited by EPD. J Asian Ceram Soc. 2017;5(3):326. doi: 10.1016/j.jascer.2017.06.005
   Web of Science ®Google Scholar
• Ma D, Xue Y, Gao J, et al. Effect of Ta diffusion layer on the adhesion properties of diamond coating on WC-Co substrate. 2020;527:146727. doi: 10.1016/j.apsusc.2020.146727
   Google Scholar
• Zoestbergen E, van de Langkruis J, Maalman TFJ, et al. Influence of diffusion on the coating adhesion of zinc-magnesium thin films onto steel. Surf Coat Technol. 2017;309:904. doi: 10.1016/j.surfcoat.2016.10.063
   Web of Science ®Google Scholar
• Böttcher CJF, van Belle OC, Bordewijk P, et al. Theory of electric polarization. J Electrochem Soc. 1974;121(6):211C. doi: 10.1149/1.2402382
   Google Scholar
• Pan R, Wang Q, Sun D, et al. Effects of electric field on interfacial microstructure and shear strength of diffusion bonded α-Al2O3/Ti joints. J Eur Ceram Soc. 2015;35(1):219. doi: 10.1016/j.jeurceramsoc.2014.07.025
   Web of Science ®Google Scholar
• Hu D, Chen J, Su Z, et al. Critical electric field stabilizing structure of Al2O3/TiO2/Al2O3 thin film for achieving high energy density. Ceram Int. 2023;49(11):17296. doi: 10.1016/j.ceramint.2023.02.096
   Web of Science ®Google Scholar
• Young L. Anodic oxide films. London; New York: Academic Press; 1961.
   Google Scholar
• Qian C, Liu Q, Xiong X, et al. Mechanism for magnetic field induced structural relaxation and accompanying fracture toughness improvement of the thermal spraying coating. Mater Design. 2022;223:111113. doi: 10.1016/j.matdes.2022.111113
   Web of Science ®Google Scholar
• Grzesik W, Małecka J. Documentation of tool wear progress in the machining of nodular ductile iron with silicon nitride-based ceramic tools. CIRP Ann. 2011;60(1):121. doi: 10.1016/j.cirp.2011.03.083
   Web of Science ®Google Scholar