Competency mapping to develop human resources for Indonesia’s sugarcane agroindustry in the Industry 4.0 era

References

• Alam, M. F. B., Tushar, S. R., Zaman, S. M., Gonzalez, E. D. R. S., Bari, A. B. M. M., & Karmaker, C. L. (2023). Analysis of the drivers of Agriculture 4.0 implementation in the emerging economies: Implications towards sustainability and food security. Green Technologies and Sustainability, 1(2), 1. https://doi.org/10.1016/j.grets.2023.100021
   Google Scholar
• Albiero, D., Paulo, R. L. D., Junior, J. C. F., Santos, J. D. S. G., & Melo, R. P. (2020). Agriculture 4.0: A terminological introduction. Revista Ciência Agronômica, 51(5), 1–24. https://doi.org/10.5935/1806-6690.20200083
   Google Scholar
• Alcácer, V., & Cruz-Machado, V. (2019). Scanning the Industry 4.0: A literature review on technologies for manufacturing systems. Engineering Science and Technology, an International Journal, 22(3), 899–919. https://doi.org/10.1016/j.jestch.2019.01.006
   Google Scholar
• Aldhyani, T. H. H., & Alkahtani, H. (2023). Cyber security for detecting distributed denial of service attacks in Agriculture 4.0: Deep learning model. Mathematics, 11(1), 233. https://doi.org/10.3390/math11010233
   Web of Science ®Google Scholar
• Alhloul, A., & Kiss, E. (2022). Industry 4.0 as a challenge for the skills and competencies of the labor force: A Bibliometric review and a survey. Science, 4(3), 34. https://doi.org/10.3390/sci4030034
   Google Scholar
• Araújo, S. O., Peres, R. S., Barata, J., Lidon, F., & Ramalho, J. C. (2021). Characterising the Agriculture 4.0 landscape—Emerging trends, challenges and opportunities. Agronomy, 11(4), 667. https://doi.org/10.3390/agronomy11040667
   Google Scholar
• Asrol, M., Marimin, M., Machfud, M., Yani, M., & Taira, E. (2021). Risk management for improving supply chain performance of sugarcane agroindustry. Industrial Engineering & Management Systems, 20(1), 9–26. https://doi.org/10.7232/iems.2021.20.1.9
   Web of Science ®Google Scholar
• Bappenas. (2020). Annex I to Presidential Decree No 18 of 2020 on the National Medium-Term Development Plan 2020-2024 (p. 20).
   Google Scholar
• Bello, S. A., Oyedele, L. O., Akinade, O. O., Bilal, M., Davila Delgado, J. M., Akanbi, L. A., Ajayi, A. O., & Owolabi, H. A. (2021). Cloud computing in construction industry: Use cases, benefits and challenges. Automation in Construction, 122, 103441. https://doi.org/10.1016/j.autcon.2020.103441
   Web of Science ®Google Scholar
• Blayone, T. J. B., & VanOostveen, R. (2021). Prepared for work in Industry 4.0? Modelling the target activity system and five dimensions of worker readiness. International Journal of Computer Integrated Manufacturing, 34(1), 1–19. https://doi.org/10.1080/0951192X.2020.1836677
   Web of Science ®Google Scholar
• BPS. (2022). Indonesian sugar cane statistics. BPS RI/BOS-Statistics Indonesia.
   Google Scholar
• Chowdhury, M. T., Sarkar, A., Paul, S. K., & Moktadir, M. A. (2020). A case study on strategies to deal with the impacts of COVID-19 pandemic in the food and beverage industry. Operations Management Research, 15(1–2), 166–178. https://doi.org/10.1007/s12063-020-00166-9
   Web of Science ®Google Scholar
• Chryssolouris, G., Mavrikios, D., & Mourtzis, D. (2013). Manufacturing systems: Skills & competencies for the future. Procedia CIRP, 7(May 2014), 17–24. https://doi.org/10.1016/j.procir.2013.05.004
   Google Scholar
• Coombe, L., Severinsen, C. A., & Robinson, P. (2022). Mapping competency frameworks: Implications for public health curricula design. Australian and New Zealand Journal of Public Health, 46(5), 564–571. https://doi.org/10.1111/1753-6405.13253
   PubMed Web of Science ®Google Scholar
• Ehlers, M. H., Finger, R., El Benni, N., Gocht, A., Sørensen, C. A. G., Gusset, M., Pfeifer, C., Poppe, K., Regan, Á., Rose, D. C., Wolfert, S., & Huber, R. (2022). Scenarios for European agricultural policymaking in the era of digitalisation. Agricultural Systems, 196, 103318. https://doi.org/10.1016/j.agsy.2021.103318
   Web of Science ®Google Scholar
• Fachrunnisa, O., & Hussain, F. K. (2020). Blockchain-based human resource management practices for mitigating skills and competencies gap in workforce. International Journal of Engineering Business Management, 12, 184797902096640. https://doi.org/10.1177/1847979020966400
   Web of Science ®Google Scholar
• Fatimah, Y. A., Kannan, D., Govindan, K., & Hasibuan, Z. A. (2023). Circular economy e-business model portfolio development for e-business applications: Impacts on ESG and sustainability performance. Journal of Cleaner Production, 415(April), 137528. https://doi.org/10.1016/j.jclepro.2023.137528
   Google Scholar
• Flores, E., Xu, X., & Lu, Y. (2020). Human Capital 4.0: A workforce competence typology for Industry 4.0. Journal of Manufacturing Technology Management, 31(4), 687–703. https://doi.org/10.1108/JMTM-08-2019-0309
   Web of Science ®Google Scholar
• Fonseca, L. M. (2018). Industry 4.0 and the digital society: concepts, dimensions and envisioned benefits. Proceedings of the International Conference on Business Excellence, 12(1), 386–397. https://doi.org/10.2478/picbe-2018-0034
   Google Scholar
• Freitas, L. D., De Melo Duarte Borges, T., Martins, A. S., Panaino, R. C., Neto, J. B. N., & Filho, M. G. (2019). Analysis and proposal of reduction of lead time in the process of cutting, loading and transportation in a sugar cane factory: A study case. Gestão & Produção, 26(3). https://doi.org/10.1590/0104-530x3446-19
   Google Scholar
• Fuertes, G., Zamorano, J., Alfaro, M., Vargas, M., Sabattin, J., Duran, C., Ternero, R., & Rivera, R. (2022). Opportunities of the technological trends linked to Industry 4.0 for achieve sustainable manufacturing objectives. Sustainability (Switzerland), 14(18), 11118. https://doi.org/10.3390/su141811118
   Web of Science ®Google Scholar
• Haeffner, M., & Panuwatwanich, K. (2018). Perceived impacts of industry 4.0 on manufacturing industry and its workforce: Case of Germany. Lecture Notes in Mechanical Engineering, 0(9783319741222), 199–208. https://doi.org/10.1007/978-3-319-74123-9_21
   Google Scholar
• Hahn, K. (2020). Opportunities for socially responsible Industry 4.0. IEEE Engineering Management Review, 48(1), 63–70. https://doi.org/10.1109/EMR.2020.2969407
   Google Scholar
• Harry, J. (2020). European journal of human resource management studies stress management and employee performance. European Journal of Human Resource Management Studies, 0(0), 28–39. https://doi.org/10.5281/zenodo.3375458
   Google Scholar
• Hasbullah, H., Bareduan, S. A., & Hasibuan, S. (2021). Developing I4.0 Readiness Index for factory operation in Indonesia to enhance INDI 4.0. International Journal on Advanced Science, Engineering and Information Technology, 11(4), 1668–1677. https://doi.org/10.18517/ijaseit.11.4.14280
   Google Scholar
• Hecklau, F., Galeitzke, M., Flachs, S., & Kohl, H. (2016). Holistic approach for human resource management in Industry 4.0. Procedia CIRP, 54, 1–6. https://doi.org/10.1016/j.procir.2016.05.102
   Google Scholar
• Heryanto, M. A., Suryatmana, E. R., Sosial, D., Pertanian, E., Pertanian, F., & Padjadjaran, U. (2020). The dynamics of the Indonesian sugar agro-industry: Introduction The sugar industry has played an important and strategic role in the Indonesian economy since the Dutch colonial era until now. (Arifin, 2008 ; Magfiroh et al., 2017).  5, 194–210.
   Google Scholar
• Holmes, D. W., Sheehan, M., Birks, M., & Smithson, J. (2018). Development of a competency mapping tool for undergraduate professional degree programmes, using mechanical engineering as a case study. European Journal of Engineering Education, 43(1), 126–143. https://doi.org/10.1080/03043797.2017.1324404
   Web of Science ®Google Scholar
• Kadir, B. A., & Broberg, O. (2021). Human-centered design of work systems in the transition to industry 4.0. Applied Ergonomics, 92(November 2020), 103334. https://doi.org/10.1016/j.apergo.2020.103334
   PubMedGoogle Scholar
• Kaur, J., & Kumar, V. (2013). Vol. 1 No. 1 January 2013 Competency mapping: A Gap analysis. International Journal of Education and Research, 1(1), 1–9.
   Google Scholar
• Kaur, J., Madaan, G., Qazi, S., & Bhalla, P. (2023). An explorative factor analysis of competency mapping for IT professionals. Administrative Sciences, 13(4), 98. https://doi.org/10.3390/admsci13040098
   Web of Science ®Google Scholar
• Kautz, T., Heckman, J. J., Diris, R., ter Weel, B., & Borghans, L. (2014). Fostering and measuring skills: Improving cognitive and non-cognitive skills to promote lifetime success. SSRN Electronic Journal, 110. https://doi.org/10.2139/ssrn.2543890
   Google Scholar
• Ketenagakerjaan, K. (2020). Keputusan Menteri Ketenagakerjaan RI No 178 Tahun 2020 Tentang Penetapan SKKNI Kategori Industri Pengolahan Golongan Pokok Industri Makanan Bidang Industri Gula Kristal Rafinasi.
   Google Scholar
• Kipper, L. M., Iepsen, S., Dal Forno, A. J., Frozza, R., Furstenau, L., Agnes, J., & Cossul, D. (2021). Scientific mapping to identify competencies required by Industry 4.0. Technology in Society, 64(October 2020), 101454. https://doi.org/10.1016/j.techsoc.2020.101454
   Google Scholar
• Lambert, M., & Bouchamma, Y. (2019). Leadership requirements for school principals: Similarities and differences between four competency standards. Canadian Journal of Educational Administration and Policy, 188, 53–68. https://cdm.ucalgary.ca/index.php/cjeap/article/view/43249
   Google Scholar
• Liu, L., Song, W., & Liu, Y. (2023). Leveraging digital capabilities toward a circular economy: Reinforcing sustainable supply chain management with Industry 4.0 technologies. Computers & Industrial Engineering, 178(April 2022), 109113. https://doi.org/10.1016/j.cie.2023.109113
   Google Scholar
• Luthra, S., Kumar, A., Zavadskas, E. K., Mangla, S. K., & Garza-Reyes, J. A. (2020). Industry 4.0 as an enabler of sustainability diffusion in supply chain: an analysis of influential strength of drivers in an emerging economy. International Journal of Production Research, 58(5), 1505–1521. https://doi.org/10.1080/00207543.2019.1660828
   Web of Science ®Google Scholar
• Mell, P., & Grance, T. (2012). The NIST definition of cloud computing: Recommendations of the National Institute of Standards and Technology. Public Cloud Computing: Security and Privacy Guidelines, 97–101.
   Google Scholar
• Meyer, C., Kreft, H., Guralnick, R., & Jetz, W. (2015). Global priorities for an effective information basis of biodiversity distributions. Nature Communications, 6(1), 8221. https://doi.org/10.1038/ncomms9221
   PubMedGoogle Scholar
• Miao, C., Humphrey, R. H., & Qian, S. (2017). A meta-analysis of emotional intelligence and work attitudes. Journal of Occupational and Organizational Psychology, 90(2), 177–202. https://doi.org/10.1111/joop.12167
   Web of Science ®Google Scholar
• Ministry of Labour. (2020). Decree of the Minister of Manpower of the Republic of Indonesia No. 178 of 2020 on the determination of the SKKNI category of processing industry in the food industry main group in the field of refined crystal sugar industry.
   Google Scholar
• Mursiti, S., Marimin, I., Romli, M., & Denni, A. (2021). Competitive and sustainable human resources development strategy in sugarcane agroindustry: Literature review and future research agenda. Jurnal Teknologi Industri Pertanian, 31(2), 129–142. https://doi.org/10.24961/j.tek.ind.pert.2021.31.2.129
   Google Scholar
• Oruma, S. O., Misra, S., & Fernandez-Sanz, L. (2021). Agriculture 4.0: An implementation framework for food security attainment in Nigeria’s Post-Covid-19 Era. IEEE Access, 9, 83592–83627. https://doi.org/10.1109/ACCESS.2021.3086453
   Web of Science ®Google Scholar
• Perera, S., Pearson, J., Ekundayo, D., & Zhou, L. (2013). Professional, academic and industrial development needs: A competency mapping and expert opinion review. International Journal of Strategic Property Management, 17(2), 143–160. https://doi.org/10.3846/1648715X.2013.806966
   Web of Science ®Google Scholar
• Pérez-Lara, M., Saucedo-Martínez, J. A., Salais-Fierro, T. E., Marmolejo-Saucedo, J. A., & Vasant, P. (2019). Vertical and horizontal integration systems in Industry 4.0. EAI/Springer Innovations in Communication and Computing, 2, 99–109. https://doi.org/10.1007/978-3-030-03898-4_11
   Google Scholar
• Raj, M., Gupta, S., Chamola, V., Elhence, A., Garg, T., Atiquzzaman, M., & Niyato, D. (2021). A survey on the role of Internet of Things for adopting and promoting Agriculture 4.0. Journal of Network and Computer Applications, 187(August), 103107. https://doi.org/10.1016/j.jnca.2021.103107
   Google Scholar
• Rangnekar, S. R. S. (2020). Understanding relationship between talent acquisition, competency mapping and performance management and appraisal. International Journal of Management, 11(5), 1735–1749.
   Google Scholar
• Rezvani, A., Chang, A., Wiewiora, A., Ashkanasy, N. M., Jordan, P. J., & Zolin, R. (2016). Manager emotional intelligence and project success: The mediating role of job satisfaction and trust. International Journal of Project Management, 34(7), 1112–1122. https://doi.org/10.1016/j.ijproman.2016.05.012
   Web of Science ®Google Scholar
• Robles, M. M. (2012). Executive perceptions of the Top 10 soft skills needed in today’s workplace. Business Communication Quarterly, 75(4), 453–465. https://doi.org/10.1177/1080569912460400
   Google Scholar
• Rout, S. S., Misra, B. B., & Samanta, S. (2018). Competency mapping with Sugeno fuzzy inference system for variable pay determination: A case study. Ain Shams Engineering Journal, 9(4), 2215–2226. https://doi.org/10.1016/j.asej.2017.03.007
   Web of Science ®Google Scholar
• Silva, F. T. D., Baierle, I. C., Correa, R. G. D. F., Sellitto, M. A., Peres, F. A. P., & Kipper, L. M. (2023). Open innovation in agribusiness: Barriers and challenges in the transition to Agriculture 4.0. Sustainability (Switzerland), 15(11), 8562. https://doi.org/10.3390/su15118562
   Web of Science ®Google Scholar
• Stachová, K., Stacho, Z., Cagáňová, D., & Stareček, A. (2020). Use of digital technologies for intensifying knowledge sharing. Applied Sciences (Switzerland), 10(12), 4281. https://doi.org/10.3390/app10124281
   Web of Science ®Google Scholar
• Takey, S. M., & Carvalho, M. M. D. (2015). Competency mapping in project management: An action research study in an engineering company. International Journal of Project Management, 33(4), 784–796. https://doi.org/10.1016/j.ijproman.2014.10.013
   Web of Science ®Google Scholar
• Verna, E., Genta, G., & Galetto, M. (2023). A new approach for evaluating experienced assembly complexity based on multi expert-multi criteria decision making method. Research in Engineering Design, 34(3), 301–325. https://doi.org/10.1007/s00163-023-00409-3
   Web of Science ®Google Scholar
• Vuorikari, R., Punie, Y., Carretero, S., & Van Den Brande, L. (2016). DigComp 2.0: The digital competence framework for citizens. JRC-IPTS, (June). https://doi.org/10.2791/11517
   Google Scholar
• Zhai, Z., Martínez, J. F., Beltran, V., & Martínez, N. L. (2020). Decision support systems for agriculture 4.0: Survey and challenges. Computers and Electronics in Agriculture, 170(August 2019), 105256. https://doi.org/10.1016/j.compag.2020.105256
   Google Scholar
• Zhang, C., & Lu, Y. (2021). Study on artificial intelligence: The state of the art and future prospects. Journal of Industrial Information Integration, 23(May), 100224. https://doi.org/10.1016/j.jii.2021.100224
   Google Scholar