Circular Formwork: Recycling of 3D Printed Thermoplastic Formwork for Concrete

References

• Alexandre, A., F. A. Cruz Sanchez, H. Boudaoud, M. Camargo, and J. M. Pearce. 2020. “Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers.” 3D Printing and Additive Manufacturing (April). https://doi.org/10.1089/3dp.2019.0195.
   Google Scholar
• Baechler, C., M. DeVuono, and J. M. Pearce. 2013. “Distributed Recycling of Waste Polymer into RepRap Feedstock.” Rapid Prototyping Journal 19:2: 118–25. https://doi.org/10.1108/13552541311302978.
   Web of Science ®Google Scholar
• Burger, J., T. Huber, E. Lloret-Fritschi, J. Mata-Falcón, F. Gramzio, and M. Kohler. 2022. “Design and Fabrication of Optimised Ribbed Concrete Floor Slabs Using Large Scale 3D Printed Formwork.” Automation in Construction 144: 104599. https://doi.org/10.1016/j.autcon.2022.104599.
   Web of Science ®Google Scholar
• Burger, J., E. Lloret-Fritschi, F. Scotto, T. Demoulin, L. Gebhard, J. Mata-Falcón, F. Gramazio, M. Kohler, and R. J. Flatt. 2020. “Eggshell: Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures.” 3D Printing and Additive Manufacturing 7:2: 48–59. https://doi.org/10.1089/3dp.2019.0197.
   Google Scholar
• Burger, J., T. Wangler, Y-H. Chiu, C. Techathuvanun, F. Gramazio, M. Kohler, and E. Lloret-Fritschi. 2021. “Material-Informed Formwork Geometry—The Effects of Cross-Sectional Variation and Patterns on the Strength of 3D Printed Eggshell Formworks.” In Proceedings of the 39th ECAADe Conferencevol. 2, 199–208. University of Novi Sad, Novi Sad, Serbia. https://doi.org/10.52842/conf.ecaade.2021.2.199.
   Google Scholar
• Cheng, B., J. Huang, K. Lu, J. Li, G. Gao, T. Wang, and H. Chen. 2022. “BIM-Enabled Life Cycle Assessment of Concrete Formwork Waste Reduction through Prefabrication.” Sustainable Energy Technologies and Assessments 53 (October): 102449. https://doi.org/10.1016/j.seta.2022.102449.
   Google Scholar
• Cruz Sanchez, F. A., H. Boudaoud, M. Camargo, and J. M. Pearce. 2020. “Plastic Recycling in Additive Manufacturing: A Systematic Literature Review and Opportunities for the Circular Economy.” Journal of Cleaner Production 264 (August): 121602. https://doi.org/10.1016/j.jclepro.2020.121602.
   Google Scholar
• Cruz Sanchez, F. A., L. Silvia, H. Boudaoud, S. Hoppe, and M. Camargo. 2015. “Polymer Recycling and Additive Manufacturing in an Open-Source Context: Optimization of Processes and Methods.” In 2015 Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference, Austin, TX.
   Google Scholar
• Czyżewski, P., M. Bieliński, D. Sykutera, M. Jurek, M. Gronowski, Ł. Ryl, and H. Hoppe. 2018. “Secondary Use of ABS Co-Polymer Recyclates for the Manufacture of Structural Elements Using the FFF Technology.” Rapid Prototyping Journal 24:9: 1447–54. https://doi.org/10.1108/RPJ-03-2017-0042.
   Web of Science ®Google Scholar
• Gebhard, L., J. Burger, J. Mata-Falcón, E. Lloret Fritschi, F. Gramazio, M. Kohler, and W. Kaufmann. 2021. “Structural Design Possibilities of Reinforced Concrete Beams Using Eggshell.” In Proceedings of the International Fib Symposium on Conceptual Design of Structures. Attisholz, Switzerland. https://doi.org/10.35789/fib.PROC.0055.2021.CDSymp.P065.
   Google Scholar
• Gomes, T. E. P., M. S. Cadete, J. Dias-de-Oliveira, and V. Neto. 2020. “Controlling the Properties of Parts 3D Printed from Recycled Thermoplastics: A Review of Current Practices.” Polymer Degradation and Stability 196 (February): 109850. https://doi.org/10.1016/j.polymdegradstab.2022.109850.
   Google Scholar
• Han, D., H. Yin, M. Qu, J. Zhu, and A. Wickes. 2020 “Technical Analysis and Comparison of Formwork-Making Methods for Customized Prefabricated Buildings: 3D Printing and Conventional Methods.” Journal of Architectural Engineering 26:2: 04020001. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000397.
   Web of Science ®Google Scholar
• Hopewell, J., R. Dvorak, and E. Kosior. 2009. “Plastics Recycling: Challenges and Opportunities.” Philosophical Transactions of the Royal Society B: Biological Sciences 364 (1526): 2115–26. https://doi.org/10.1098/rstb.2008.0311.
   PubMed Web of Science ®Google Scholar
• Jipa, A., C. C. Barentin, G. Lydon, M. Rippmann, M. Lomaglio, A. Schlüter, and P. Block. 2017. “3D-Printed Formwork for Integrated Funicular Concrete Slabs.” IASS 2019 Barcelona Symposium: Advanced Manufacturing and Non-Conventional Materials, 1–8. https://www.ingentaconnect.com/content/iass/piass/2019/00002019/00000006/art00006.
   Google Scholar
• Jipa, A. and B. Dillenburger. 2021. “3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications.” 3D Printing and Additive Manufacturing 9:2: 84–107. https://doi.org/10.1089/3dp.2021.0024.
   Google Scholar
• Jipa, A., F. Giacomarra, R. Giesecke, G. Chousou, M. Pacher, B. Dillenburger, M. Lomaglio, and M. Leschok. 2019. “3D-Printed Formwork for Bespoke Concrete Stairs: From Computational Design to Digital Fabrication.” In Proceedings of the ACM Symposium on Computational Fabrication, 1–12. Pittsburgh, PA: Association for Computing Machinery. https://doi.org/10.1145/3328939.3329003.
   Google Scholar
• Jipa, A., L.R Reiter, R.J. Flatt and B. Dillenburger. 2022. “Environmental Stress Cracking of 3D-Printed Polymers Exposed to Concrete.” Additive Manufacturing 58 (October): 103026. https://doi.org/10.1016/j.addma.2022.103026.
   Google Scholar
• Keating, S. and N. Oxman. 2013. “Compound Fabrication: A Multi-Functional Robotic Platform for Digital Design and Fabrication.” Robotics and Computer-Integrated Manufacturing 29:6: 439–48. https://doi.org/10.1016/j.rcim.2013.05.001.
   Web of Science ®Google Scholar
• Kováčová, M., J. Kozakovičová, M. Procházka, I. Janigová, M. Vysopal, I. Černičková, J. Krajčovič, and Z. Špitalský. 2020. “Novel Hybrid PETG Composites for 3D Printing.” Applied Sciences 10:9: 3062. https://doi.org/10.3390/app10093062.
   Google Scholar
• Kreiger, M. A., M. L. Mulder, A. G. Glover, and J. M. Pearce. 2014. “Life Cycle Analysis of Distributed Recycling of Post-Consumer High Density Polyethylene for 3-D Printing Filament.” Journal of Cleaner Production 70 (May): 90–96. https://doi.org/10.1016/j.jclepro.2014.02.009.
   Google Scholar
• Latko-Durałek, P., K. Dydek, and A. Boczkowska. 2019. “Thermal, Rheological and Mechanical Properties of PETG/RPETG Blends.” Journal of Polymers and the Environment 27:11: 2600–2606. https://doi.org/10.1007/s10924-019-01544-6.
   Web of Science ®Google Scholar
• Leschok, M. and B. Dillenburger. 2019. “Dissolvable 3DP Formwork.” In Ubiquity and Autonomy–Proceedings of the ACADIA Conference, 188–96. Austin, TX: The University of Texas at Austin. https://doi.org/10.52842/conf.acadia.2019.188.
   Google Scholar
• Lloret-Fritschi, E. et al. 2022. “Additive Digital Casting: From Lab to Industry.” Materials 15:10: 1–21. https://doi.org/10.3390/ma15103468.
   Web of Science ®Google Scholar
• Meibodi, M. A., A. Jipa, R. Giesecke, D. Shammas, M. Bernhard, M. Leschok, K. Graser, and B. Dillenburger. 2018. “Smart Slab: Computational Design and Digital Fabrication of a Lightweight Concrete Slab.” In Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), 434–43. https://doi.org/10.52842/conf.acadia.2018.434.
   Google Scholar
• Molitch-Hou, M. 2018. “Aectual 3D Prints Everything from Floors to Walls.” Engineering.Com (website). https://www.engineering.com/story/aectual-3d-prints-everything-from-floors-to-walls.
   Google Scholar
• Monteiro, P. J. M., S. A. Miller, and A. Horvath. 2017. “Towards Sustainable Concrete.” Nature Materials 16:7: 698–99. https://doi.org/10.1038/nmat4930.
   PubMed Web of Science ®Google Scholar
• Murtha, L. 2021. “Architect José Garciá Builds a New Kind of Connection.” Cincinnati Magazine, April 13, 2021. https://www.cincinnatimagazine.com/article/architect-jose-garcia/.
   Google Scholar
• Naboni, R. and L. Breseghello. 2020. “High-Resolution Additive Formwork for Building-Scale Concrete Panels.” In Second RILEM International Conference on Concrete and Digital Fabrication, edited by F. P. Bos, S. S. Lucas, R. J. M. Wolfs, and T. A. M. Salet, 936–45.
   Google Scholar
• RILEM Bookseries. Cham: Springer International Publishing. https://doi.org/10.1007/978-3-030-49916-7_91.
   Google Scholar
• Qi, B., M. Razkenari, A. Costin, C. Kibert, and M. Fu. 2021. “A Systematic Review of Emerging Technologies in Industrialized Construction.” Journal of Building Engineering 39 (July): 102265. https://doi.org/10.1016/j.jobe.2021.102265.
   Google Scholar
• Roschli, A., B. K. Post, P. C. Chesser, M. Sallas, L. J. Love, and K. T. Gaul. 2018. “Precast Concrete Molds Fabricated with Big Area Additive Manufacturing.” In Solid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference, 568–79. https://www.osti.gov/biblio/1471898.
   Google Scholar
• Schroeder, P., K. Anggraeni, and U. Weber. 2019. “The Relevance of Circular Economy Practices to the Sustainable Development Goals.” Journal of Industrial Ecology 23:1: 77–95. https://doi.org/10.1111/jiec.12732.
   Web of Science ®Google Scholar
• Vidakis, N., M. Petousis, L. Tzounis, S. Grammatikos, E. Porfyrakis, A. Maniadi, and N. Mountakis. 2021. “Sustainable Additive Manufacturing: Mechanical Response of Polyethylene Terephthalate Glycol over Multiple Recycling Processes.” Materials 14:5: 1162. https://doi.org/10.3390/ma14051162.
   PubMed Web of Science ®Google Scholar
• Volpato, N., D. Kretschek, J. A. Foggiatto, and C. M. Gomez da Silva Cruz. 2015. “Experimental Analysis of an Extrusion System for Additive Manufacturing Based on Polymer Pellets.” International Journal of Advanced Manufacturing Technology 81:9–12: 1519–31. https://doi.org/10.1007/s00170-015-7300-2.
   Web of Science ®Google Scholar