References
- International Atomic Energy Agency (IAEA): ‘Regulations for the safe transport of radioactive material’, 2012 edn, Specific Safety Requirements No. SSR-6, IAEA, Vienna, Austria, 2012.
- ‘Guideline for the design approval procedure of packages for the transport of radioactive material, of special form radioactive material and low dispersible radioactive material (R003)’, Verkehrsblatt, 2004, (23), 594.
- Wolff D, Völzke H, Wille F and Droste B: ‘Extended storage after long-term storage’, Proc. 17th Int. Symp. on ‘Packaging and transport of radioactive materials’ (PATRAM 2013), San Francisco, CA, USA, August 2013, US DOE.
- Erhard A, Völzke H, Probst U and Wolff D: ‘Aging management for long term interim storage casks’, Packag. Transp. Stor. Secur. Radioact. Mater., 2011, 22, 46–53.
- Völzke H, Wolff D, Probst U, Nagelschmidt S and Schulz S: ‘Long-term performance of metal seals for transport and storage casks’, Packag. Transp. Stor. Secur. Radioact. Mater., 2014, 26, 8–15.
- Jaunich M, Stark W, Wolff D and Völzke H: ‘Investigation of elastomer seal behavior for transport and storage packages’, Proc. 17th Int. Symp. on ‘Packaging and transport of radioactive materials’ (PATRAM 2013), San Francisco, CA, USA, August 2013, US DOE.
- AtG – Act on the peaceful utilization of atomic energy and the protection against its hazards (Atomic Energy Act – AtG) of 23 December 1959 (Federal Law Gazette I, 814), as Amended and promulgated on 15 July 1985 (Federal Law Gazette I, 1565), last Amendment by Article 1 of the Act amending the Atomic Energy Act of 20 April 2013 (Federal Law Gazette I, 921).
- ‘Recommendation of the Nuclear Waste Management Commission (ESK) – Guidelines for dry cask storage of spent fuel and heat-generating waste (revised version of 10·06·2013) (in German)’. Available at http://www.entsorgungskommission.de/englisch/statements-recommendations-letters/index.htm
- Wille F, Droste B, Müller K and Zencker U: ‘Mechanical design assessment approaches of actual spent fuel and HLW transport package designs’, Packag. Transp. Stor. Secur. Radioact. Mater., 2010, 21, (4), 203–207.
- Wille F, Droste B, Koch F and Komann S: ‘Design assessment of spent fuel and HLW transport casks’, Proc. INMM 49th Annual Meet., Nashville, TN, USA, July 2008, INMM.
- Nitsche F, Reiche I, Stewart J and Whittingham S: ‘European technical guide on package design safety reports for transport packages containing radioactive material’, Packag. Transp. Stor. Secur. Radioact. Mater., 2008, 19, (2), 87–93.